Application of k 0-based internal monostandard NAA for large sample analysis of clay pottery: as a part of inter comparison exercise

As a part of inter comparison exercise of an IAEA Coordinated Research Project on large sample neutron activation analysis, a large size and non standard geometry size pottery replica (obtained from Peru) was analyzed by k ₀-based internal monostandard neutron activation analysis (IM-NAA). Two large size sub samples (0.40 and 0.25 kg) were irradiated at graphite reflector position of AHWR Critical Facility in BARC, Trombay, Mumbai, India. Small samples (100–200 mg) were also analyzed by IM-NAA for comparison purpose. Radioactive assay was carried out using a 40 % relative efficiency HPGe detector. To examine homogeneity of the sample, counting was also carried out using X–Z rotary scanning unit. In situ relative detection efficiency was evaluated using gamma rays of the activation products in the irradiated sample in the energy range of 122–2,754 keV. Elemental concentration ratios with respect to Na of small size (100 mg mass) as well as large size (15 and 400 g) samples were used to check the homogeneity of the samples. Concentration ratios of 18 elements such as K, Sc, Cr, Mn, Fe, Co, Zn, As, Rb, Cs, La, Ce, Sm, Eu, Yb, Lu, Hf and Th with respect to Na (internal mono standard) were calculated using IM-NAA. Absolute concentrations were arrived at for both large and small samples using Na concentration, obtained from relative method of NAA. The percentage combined uncertainties at ±1 s confidence limit on the determined values were in the range of 3–9 %. Two IAEA reference materials SL-1 and SL-3 were analyzed by IM-NAA to evaluate accuracy of the method.     

Analysis of SMELS by k 0-based IM-NAA method using PFTS position of KAMINI reactor for quality control exercise

As a part of QA/QC of k ₀-based internal monostandard neutron activation analysis (IM-NAA), three types of synthetic multielement standards (SMELS) were analyzed using pneumatic fast transfer system irradiation position of KAMINI reactor, IGCAR. Radioactive assay of activation products was carried out by high resolution gamma ray spectrometry. IM-NAA was used to determine relative concentration ratios of 22 elements with respect to gold internal monostandard. Absolute concentrations were calculated using assigned concentration of Au in all the types of SMELS. Z-score values within ±1 at 95.5 % confidence level and percentage deviations within ±5 % indicated good quality of the results by IM-NAA in most of the cases. Using this methodology, an ilmenite mineral sample was analyzed and concentrations of 14 elements were determined using Sc as monostandard.     

The influence of the conditions of the anodic formation and the thickness of Ag(I) oxide nanofilm on its semiconductor properties

The anodic formation of Ag(I) oxide nanofilms on polycrystalline silver and Ag–Au alloys as well as on low-index single crystals of silver in 0.1?М KOH was examined. By the methods of photocurrent i _ph and photopotential E _ph measurements, the n-type conductivity of Ag₂O film was established. Since the film (6–120 nm) is thinner than the space charge region, the dependence of photocurrent and photopotential appears on the film thickness L: i _ph ~L and E _ph ~L ². The transition from polycrystalline silver to single crystals as well as the addition of a small amount of gold (X _Au?≤?4 at.%) into the silver lattice decreases the degree of deviation from the stoichiometric composition Ag₂O. The parameters of Ag₂O film (optical absorption coefficient α, donor defects concentration N _D, space charge region W, and Debye’s length of screening L _D) depend on the index of a crystal face of silver, volume concentration of gold X _Au in the alloy, and film-formation potential E. At Е?=?0.52 V, the sequences of variation of these parameters correlate with the reticular density sequence. The growth of the potential disturbs these sequences. The band gap in Ag₂O formed on Ag_poly, Ag_hkl, and Ag–Au is 2.32, 2.23, and 2.19 eV. Flat band potential in Ag(I) oxide, formed on Ag_poly in 0.5 M KOH is 0.37 V. The appearance of the clear dependence between the state of the oxide/metal interface and the structure-sensitive parameters of semiconductor Ag(I) oxide phase allows considering the anodic formation of Ag₂O on Ag as a result of the primary direct electrochemical reaction, not of the precipitation from the near-electrode layer.     

An amperometric uric acid biosensor based on chitosan-carbon nanotubes electrospun nanofiber on silver nanoparticles

A novel amperometric uric acid biosensor was fabricated by immobilizing uricase on an electrospun nanocomposite of chitosan-carbon nanotubes nanofiber (Chi–CNTsNF) covering an electrodeposited layer of silver nanoparticles (AgNPs) on a gold electrode (uricase/Chi–CNTsNF/AgNPs/Au). The uric acid response was determined at an optimum applied potential of ?0.35 V vs Ag/AgCl in a flow-injection system based on the change of the reduction current for dissolved oxygen during oxidation of uric acid by the immobilized uricase. The response was directly proportional to the uric acid concentration. Under the optimum conditions, the fabricated uric acid biosensor had a very wide linear range, 1.0–400 μmol L^?1, with a very low limit of detection of 1.0 μmol L^?1 (s/n?=?3). The operational stability of the uricase/Chi–CNTsNF/AgNPs/Au biosensor (up to 205 injections) was excellent and the storage life was more than six weeks. A low Michaelis–Menten constant of 0.21 mmol L^?1 indicated that the immobilized uricase had high affinity for uric acid. The presence of potential common interfering substances, for example ascorbic acid, glucose, and lactic acid, had negligible effects on the performance of the biosensor. When used for analysis of uric acid in serum samples, the results agreed well with those obtained by use of the standard enzymatic colorimetric method (P?>?0.05).

Differing Coordination Modes of (O‐Alkyl)‐p‐Ethoxyphenyldithiophosphonato Ligands in Copper(I), Silver(I) and Gold(I) Triphenylphosphine Complexes

The three (O‐methyl)‐p‐ethoxyphenyldithiophosphonato triphenylphosphine complexes of copper, silver and gold, [(Ph₃P)_nM{S₂P(OMe)C₆H₄OEt‐p}] (M = Cu, n = 2; M = Ag, Au, n = 1) investigated structurally by X‐ray diffraction exhibit remarkable structural differences. The copper compound is a four‐coordinate chelate monomer with Cu–S 2.4417(6) and 2.5048(6) Å; P–Cu–S 104.24(2)–114.01(2)°; Cu–S–P 82.49(3)° and 80.85(2)°. The silver compound is a cyclic dimer with bridging dithiophosphonato ligands and three‐coordinate silver atoms [Ag–S 2.5371(5) and 2.6867(5) Å; P–Ag–S 122.88(2)° and 122.17(2)°; Ag–S–P 89.32(2)° and 103.56(2)°]. The gold compound is monomeric with linear dicoordinate gold [Au–S 2.3218(6) Å; P–Au–S 177.72(2)°, Au–S–P 100.97(3)°].     

Synthesis of Au13(glutathionato)8@β-cyclodextrin nanoclusters and their use as a fluorescent probe for silver ions

Heating and drying of the mixture of glutathione-etched gold nanoparticles (Au-SG) and β-cyclodextrin (β-CD) results in the formation of β-CD-capped and glutathionate-protected Au₁₃ nanoclusters (Au₁₃(SG)₈@β-CD). Their particle size, composition, and number of gold atoms and the capping molecules were characterized by scanning electron microscopy, fluorescence, UV–vis absorption, FT-IR spectroscopy and mass spectrometry. The fluorescence of these nanoclusters is specifically enhanced by the addition of Ag(I) ions to the aqueous solution. This effect was exploited to develop a selective and sensitive method for the fluorometric determination of Ag(I) in water in the concentration range between 0.5 nM and 0.1 μM, with a detection limit at 0.3 nM (at a signal-to-noise ratio of 3). Graphical Abstract

β-CD-capped Au₁₃ nanoclusters has been synthesized by heating and drying the mixture of glutathione-etched gold nanoparticles and β-CD. A simple, sensitive and selective FL sensing method for Ag⁺ in environmental water has developed using the Au nanoclusters.     

Efficient chemiluminescence by aptamer – reactant platform combination with activated Ag–Au alloy nanoparticles for cobalt detection

This article deals with the detection of Co(II) in real water sample using aptamer – reactant platform combination with activated Ag–Au alloy nanoparticles (NPs) by chemiluminescence (CL) method. CL is attributed to a catalytically enhanced decomposition of H₂O₂ by aptamer conjugated Ag–Au alloy NPs to produce reactive oxygen species. The Ag–Au alloy NPs were prepared by chemical method using double reducing agent (i.e. trisodium citrate and polyethylenimine) and used for detection of Co(II) from water by CL method. CL experiments were carried out with the variation of different parameters such as pH, concentration of luminol, concentration of H₂O₂ and Ag–Au alloy NPs. We found that Ag–Au alloy NPs have very good efficiency towards Co(II) detection. Analytical parameters and kinetics were studied in detail to know the nature and mechanism of CL in presence of aptamer conjugated Ag–Au alloy NPs. The linear range of the CL sensor of Co(II) is covered concentration from 0.01 to 10 µg/L with detection limit of 0.001 µg/L. The relative standard deviation for determination of Co(II) was 6.65 in 10 replicated measurements. CL method is first time applied to detect the Co(II) in real water samples at very low level using aptamer conjugated Ag–Au NPs as a catalyst.     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

Effect of Glass Substrates on the Formation of Gold-Silver Colloids in Nanocomposite Thin Films

A sol-gel route to synthesize nanocomposite thin films containing phase separated metal colloids of gold (Au) and silver (Ag) was developed. Ag—Au colloids were prepared in silica films using dip coating technique. The annealing of the samples in air results in the formation of phase separated Ag and Au colloids in SiO₂ thin films, showing the surface plasmon peaks at 410 nm and 528 nm. For the synthesis of phase separated Ag and Au colloids on float glass substrates, formation of the silver colloids was found strongly dependent on the surface of the float glass. On the tin rich surface formation of both gold and silver colloids took place, whereas, on the tin poor surface the formation of only gold colloids was observed. The surface dependence of the formation of silver colloids was attributed to the presence of tin as Sn²⁺ state on the glass surface, which oxidizes into Sn⁴⁺ during heat treatment, reducing Ag⁺ into silver colloids.     

MALDI-Q-TOF mass spectrometric determination of gold and platinum in tissues using their diethyldithiocarbamate chelate complexes

A rapid determination method is presented for gold (Au³⁺) and platinum (Pt⁴⁺) in tissues using matrix-assisted laser desorption ionization quadrupole time-of-flight mass spectrometry (MALDI-Q-TOF-MS). Au and Pt ions in wet-ashed tissue solution were reacted with diethyldithiocarbamate (DDC), and the resulting chelate complex ions Au(DDC)₂ ⁺ and Pt(DDC)₃ ⁺ were detected by MALDI-Q-TOF-MS using α-cyano-4-hydroxycinnamic acid as a matrix. The limit of detection (LOD) was 0.8 ng/g tissue and the quantification range was 2–400 ng/g for Au, and the LOD was 6 ng/g tissue and the quantification range was 20–4,000 ng/g for Pt. The Pt levels detected by MALDI-Q-TOF-MS in several tissues of a patient overdosed with cisplatin were nearly the same as those detected by flow-injection electrospray ionization mass spectrometry. The LODs of Au and Pt were 0.04 pg per well (sample spot) and 0.3 pg per well, respectively. To our knowledge, this is the first attempt to quantify Au³⁺ and Pt⁴⁺ ions in tissues by MALDI-Q-TOF-MS.

Neutron activation analysis of traces of gold in pure silver using sulfur as a preconcentration agent

In this method for the determination of traces of gold in silver, the sulfur produced by decomposition of silver (matrix) sulfide precipitate with nitric acid was used as a preirradiation concentration agent. As the activated sulfur does not interfere with the γ-ray spectrometry, the γ-radioactivity of¹⁹⁸Au in the activated sulfur sample was counted directly with a Ge(Li) detector without post-irradiation chemical treatment. The chemical yield of gold was more than 99%, and the concentration factor was 5–6·10³. The analytical results of gold in 99.9 and 99.999% silver were 1.6–2.5 and 0.015–0.024 ppm, respectively.     

Direct electrochemistry and electrocatalysis of hemoglobin on a gold ion implantation-modified indium tin oxide electrode

In this paper, a gold nanoparticle-modified indium tin oxide electrode (Au/ITO) was prepared without the use of any cross-linker or stabilizer reagent. The prepared Au/ITO was used as a new platform to achieve the direct electron transfer between Hb and the modified electrode. The proposed electrode exhibited a pair of well-defined redox peaks with a formal potential of ?0.073 V (vs. Ag/AgCl). The immobilized Hb showed excellent electrocatalytic activity toward H₂O₂ and the electrocatalytic current values were linear with the increasing concentration of H₂O₂ ranging from 1.0?×?10^?6?M to 7.0?×?10^?4?M. The detection limit was 2.0?×?10^?7?M (S/N?=?3) and the Michaelis–Menten constant was calculated to be 0.2 mM. The proposed electrode also showed high selectivity, long-term stability, and good reproducibility.     

Rapid and Sensitive LC−MS–MS Method for the Determination of Sarpogrelate in Human Plasma

A rapid and sensitive liquid chromatographic–tandem mass spectrometric method has been developed and validated for the estimation of sarpogrelate in human plasma. Sarpogrelate was extracted from human plasma by solid-phase extraction. Temocapril was used as the internal standard. Heated electron spray ionization mass spectrometry was performed on a TSQ Quantum Ultra MS system. The LC column was a Hypurity C₁₈ and the mobile phase was 2 mM ammonium formate (pH 3.00 ± 0.05):acetonitrile (30:70 v/v). A flow rate of 0.250 mL min^?1 was used. The quantitative analyses were carried out in the positive ion and full scan mode over the mass range m/z 60–500. The capillary, vaporiser temperatures were 325 and 200 °C respectively. The sheath gas pressure, spray voltage, collision energy and tube lense were 40, 3,500 V, 19 V, 198 V, respectively, and the mass spectra of the drugs were recorded by total ion monitoring. Retention times and characteristic mass fragments were recorded and the chosen diagnostic mass fragments were monitored in the mass chromatography mode. Signal intensities of each of the mass fragments: m/z 477 [M + H]⁺ for temocapril, m/z 430 [M + H]⁺ for sarpogrelate, were used for quantification. The calibration curves (the ratio between the peak areas as signal intensities of the drug analyzed and that of the internal standard (temocapril: m/z 477 [M + H]⁺) vs. the concentration of drug) exhibited linearity over the concentration range 5.00–2,500.00 ng mL^?1 human plasma. The recovery and the accuracy were calculated by comparing the peak areas as the signal intensities of each mass fragment for the drug in spiked samples after solid-phase extraction from human plasma to the peak area as the signal intensity of the mass fragment of internal standard sample. The method involves a rapid solid phase extraction from plasma, simple isocratic chromatography conditions and mass spectrometric detection that enables detection up to picogram levels with a total run time of 3.0 min only. The method was validated over the range of 5.0–2,500.0 ng mL^?1. The absolute recoveries for sarpogrelate (93.72%) and IS (91.42%) achieved from spiked plasma samples were consistent and reproducible.     

New technique for the determination of trace noble metal content in geological and process materials

A new two-step sample preparation technique is proposed for the instrumental determination of trace quantities of noble metals (NM) in refractory geological and process materials. The decomposition procedure is based on the oxidizing fluorination of samples with subsequent sulfatization (OFS) of the sample melt or cake. Fluorination of samples is accomplished using a mixture of KHF₂+KBrF₄ or KHF₂+BrF₃ depending on the ratio of sample mass to oxidizing mixture. Both cakes and melts can result using this procedure. Sulfatization of resulting fluorides is completed using concentrated sulfuric acid heated to 550 °C. Validation studies using certified geostandard reference materials (GSO VP-2, ZH-3, Matte RTP, HO-1, SARM-7) have shown that the proposed method is fast, convenient and most often produces non-hygroscopic homogeneous residues suitable for analysis by atomic absorption spectrometry (AAS) and atomic emission spectrometry (AES). Results obtained for NM concentrations in reference materials agreed with certified concentration ranges and results obtained using other methods of analysis. The OFS procedure combined with direct current plasma d.c. plasma AES achieved the following limits of detection (LOD) for the noble metals: Ag, Au, Pd, 1–2×10⁻⁶; Pt, 5×10⁻⁶; and Ru, Rh, Ir, Os, 1–3×10⁻⁷ wt.%. Using graphite furnace AAS (GFAAS) combined extraction pre-concentration the following LODs for NMs were achieved: Pt, Ru, 1×10⁻⁶; Pd, Rh, 1×10⁻⁷; and Au, Ag, 1−2×10⁻⁸ wt.%. The relative standard deviation for NM determinations (S_r) was dependent on NM concentration and sample type, but commonly was in the range of 3–15% for d.c. plasma AES and 5–30% for GFAAS.     

Preconcentration of silver(I), gold(III) and palladium(II) in sea water with p-dimethylaminobenzylidenerhodanine supported on silica gel

A water-insoluble chelating material, p-dimethylaminobenzylidenerhodanine on silica gel (DMABR—SG) is described for preconcentration of trace amounts of silver(I), gold(III) and palladium(II) from water samples. Radioactive tracers (^110mAg and ¹⁹⁵Au) were used to study the behavior of silver and gold; palladium was monitored spectrophotometrically as its 1-(2-pyridylazo)naphthol complex in chloroform. In batch experiments, silver was quantitatively retained on the DMABR—SG at acidities ranging from 1.7 M to pH 5, and gold from 3 M to pH 5; equilibrium was achieved within 1 min for both elements. From sea water, silver ion was completely retained at pH 1.0–6.5 and gold ion at pH 1.0–3.5. In the case of palladium, shaking for about 20 min was required for quantitative retention at pH 1.0–5.0 for aqueous solution and at pH 1.0–7.0 for sea water. The chelating capacity of the DMABR—SG was 23 μmol Ag, 11 μmol Au and 11 μmol Pd per g. Quantitative recovery of silver and gold on DMABR—SG columns from sea water was achieved at higher flow rates (1–2 l h^-1 and 2–3 l h^-1, respectively) than with other chelating resins, e.g., Chelex 100, palladium required slower flow rate (150 ml h^-1). Silver retained on the DMABR—SG column was completely eluted with 20 ml of 2.5% sodium thiosulfate solution but palladium remained on the column. Silver, gold and palladium were quantitatively eluted with 20 ml of 0.1% thiourea in 0.1 M hydrochloric acid.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Comparative study of carbon paste electrodes modified by new pentaaza macrocyclic ligands and gold nanoparticles embedded in three-dimensional sol–gel network for determination of trace amounts of Ag(I)

Two new Ag(I) chemically modified carbon paste electrodes were prepared with comparative potentiometric study of 1,3,6,10,13-pentaaza-2,14-(2,6-pyridyl)-cyclotetradecane-4,12-dione (PPCT) and 1,3,6,9,11,12-pentaaza-2,13-(2,6-pyridyle)-bicycle[2,2,9]pentadecane-4,11-dione (PPBP) as ionophore. These sensors have been modified with sol–gel–Au nanoparticles to obtain a wide concentration range for potentiometric determination of Ag(I) in aqueous solutions. The sensors exhibit significantly enhanced selectivity toward Ag(I) ions over a wide concentration range of 4.0 × 10^?9–2.2 × 10^?2 and 2.2 × 10^?7–2.0 × 10^?2 mol L^?1 with a lower detection limit of 2.5 × 10^?9 and 2.0 × 10^?7 mol L^?1 for PPCT and PPBP modified electrodes respectively. The electrodes are highly selective to Ag(I) ions over a large number of mono, bi, and tri-valent cations. These electrodes were successfully used as indicator electrode for potentiometric determination of silver in sulphadiazine (burning cream) and radiological film.     

The separation–preconcentration and determination of ultra-trace gold in water and solid samples by dispersive liquid–liquid microextraction using 4-ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) as chelating agent and flame atomic absorption spectrometry

A selective separation and preconcentration method for the determination of gold ions in water and ore samples has been developed using dispersive liquid–liquid microextraction, followed by flame atomic absorption spectrometry. 4-Ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) (NPPTSC) has been used for the first time as new chelating reagent. A mixture of ethanol (dispersive solvent) and carbon tetrachloride (extraction solvent) was used. Some parameters affecting the extraction procedure including the type and volume of the extracting and dispersive solvents, HNO₃ concentration, the chelating agent amount, volume of sample, and foreign ions have optimized. Also, the complex formation between gold ions and the ligand has been investigated in a methanol–water solution (1:1) using UV–visible spectrometry. The spectrophotometric titration data showed that of Au–NPPTSC complex composition was found to be 3:2. After optimizing the instrumental and experimental parameters, we achieved a detection limit of 1.5 µg L^?1, a preconcentration factor of 50, and a linear dynamic range of 10.0–400.0 µg L^?1. The relative standard deviation obtained 2.1% at 50 µg L^?1 for gold ions (n = 10). The proposed method was successfully performed for the determination of gold in certified reference material, environmental water, and ore samples.     

Small Gold(I) and Gold(I)–Silver(I) Clusters by C−Si Auration

Auration of o-trimethylsilyl arylphosphines leads to the formation of gold and gold–silver clusters with ortho-metalated phosphines displaying 3c–2e Au−C−M bonds (M=Au/Ag). Hexagold clusters [Au₆L₄](X)₂ are obtained by reaction of (L−TMS)AuCl with AgX, whereas reaction with AgX and Ag₂O leads to gold–silver clusters [Au₄Ag₂L₄](X)₂. Oxo-trigold(I) species [Au₃O]⁺ were identified as the intermediates in the formation of the silver-doped clusters. Other [Au₅], [Au₄Ag], and [Au₁₂Ag₄] clusters were also obtained. Clusters containing PAu−Au−AuP structural motif display good catalytic activity in the activation of alkynes under homogeneous conditions.     

Electrochemical application of titanium dioxide nanoparticle/gold nanoparticle/multiwalled carbon nanotube nanocomposites for nonenzymatic detection of ascorbic acid

Titanium dioxide nanoparticle/gold nanoparticle/carbon nanotube (TiO₂/Au/CNT) nanocomposites were synthesized, and then characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). A TiO₂/Au/CNT nanocomposite-modified glassy carbon (GC) electrode was prepared using the drop coating method and was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometric current–time response (I-T). The modified material is redox-active. The nonenzymatically detected amount of ascorbic acid (AA) on the TiO₂/Au/CNT electrode showed a linear relationship with the AA concentration, for concentrations from 0.01 to 0.08 μM; the sensitivity was 117,776.36 μA?·?cm^?2?·?(mM)^?1, and the detection limit was 0.01 μM (S/N?=?3). The results indicated that the TiO₂/Au/CNT nanocomposite-modified GC electrode exhibited high electrocatalytic activity toward AA. This paper describes materials consisting of a network of TiO₂, Au, and MWCNTs, and the investigation of their synergistic effects in the detection of AA.