Flow of non-newtonian particulate suspension with a compressible particle phase

Continuum equations for a two-phase fluid-particle flow are developed and applied to the problem of steady, laminar flow over an infinite porous flat plate. Both phases are assumed to behave as non-Newtonian power-law fluids. The effects of particle-particle interaction and diffusion of particles are taken into account in the mathematical model. In addition, the particle phase is assumed to have a non-uniform density distribution. The resulting governing equations are nondimensionalized and solved numerically subject to appropriate boundary conditions using an iterative, implicit finite-difference method. Graphical results for the displacement thicknesses and the skin-friction coefficients for both the fluid and particle phases are presented and discussed to elucidate interesting features of the solutions.     

Free Convection in a Square Cavity Filled with a Tridisperse Porous Medium

This work is dealing with the natural convection heat transfer in a square filled with porous medium that has been extended according to the Nield and Kuznetsov model to tridisperse porous medium. Considering impermeable walls which the horizontal ones are insulated and vertical ones are assumed to be isothermal, the governing equations are set as the three equations for momentum and three equations for energy for three phases of porosity and are numerically solved utilizing finite element method. In this study isothermal contours, streamlines and Nusselt number values are foremost criteria which are presented for three levels of porosity. The influence of various governing parameters on the heat transfer is investigated.     

The Effects of Fluid-to-Solid Conductivity Ratio, Rayleigh Number and Interstitial Heat Transfer Coefficient on the TNE Free Convection in a Porous Enclosure

This article is concerned with thermal non-equilibrium (TNE) free convection in a two-dimensional porous enclosure. The Darcy model is used for the momentum equation and it is assumed that a substantial temperature difference exists between solid and fluid phases. Numerical solutions of the governing equations are obtained for a wide range of the governing parameters. The Nusselt numbers for both solid and fluid phases are calculated for a wide range of Rayleigh number, i.e., 500??? Ra??? 1500. The effects of the cavity dimensions as well as the fluid-to-solid conductivity ratio on the Nusselt number are also studied. The results of the presented study are compared with those of thermal equilibrium model. Moreover, the results are compared with major computational models presented in the literatures. The results obtained for the Nusselt number in the case of TNE model are correlated with a function incorporating the effects of effective non-dimensional parameters.     

Natural Convection Induced by a Heated Vertical Plate Embedded in a Porous Medium with Transpiration: Local Thermal Non-equilibrium Similarity Solutions

This paper is concerned with the thermal non-equilibrium free convection boundary layer, which is induced by a vertical heated plate embedded in a saturated porous medium. The effect of suction or injection on the free convection boundary layer is also studied. The plate is assumed to have a linear temperature distribution, which yields a boundary layer of constant thickness. On assuming Darcy flow, similarity solutions are obtained for governing the steady laminar boundary layer equations. The reduced Nusselt numbers for both the solid and fluid phases are calculated for a wide range of parameters, and compared with asymptotic analyses.     

Magnetohydrodynamic heat transfer in two-phase flow between parallel plates

This study dealt with two-phase magnetohydrodynamic (MHD) flow and heat transfer in a parallel-plate channel. Both phases were incompressible and the flow was assumed to be steady, one-dimensional and fully developed. The present study was expected to be useful in the understanding of the effect of the presence of slag layers on the heat transfer characteristics of a coal-fired MHD generator.The problem was investigated, in which one of the two fluids was assumed to be electrically non-conducting. The transport properties of the two fluids were taken to be constant, and the plates were assumed to be maintained at constant and equal temperatures. In this case, the governing differential equations were linear, and an exact solution was obtained. Results were presented for various height and viscosity ratios for the two fluids and for two values of the electric field loading parameter. The governing equations were also solved numerically in order to verify the exact solution.     

Unsteady flow of a dusty Bingham fluid through a porous medium in a circular pipe

A time-varying flow through a porous medium of a dusty viscous incompressible Bingham fluid in a circular pipe is studied. A constant pressure gradient is applied in the axial direction, whereas the particle phase is assumed to behave as a viscous fluid. The effect of the medium porosity, the non-Newtonian fluid characteristics, and the particle phase viscosity on the transient behavior of the velocity, volumetric flow rates, and skin friction coefficients of both the fluid and particle phases is investigated. A numerical solution is obtained for the governing nonlinear momentum equations by using the method of finite differences.     

Heat transfer analysis of a particle-containing channel flow

This paper describes an analytical model of heat transfer in a two-dimensional, steady, nonreacting particle-containing channel flow. An idealized gas flow of specified uniform velocity between insulated parallel plates is assumed and the nonvaporizing particles are conceptualized as contained within an thin sheet injected at the symmetry plane. Two dimensionless parameters that affect the solution are described. These are the effective gas diffusivityK and the dimensionless particle number densityP. The linear, coupled differential equations governing the energy exchange between the gas and liquid phases are solved by means of the Green's function technique. This procedure yields a Volterra integral-series equation as the solution of the gas-phase energy equation. A series solution of this integral equation is obtained by the method of successive substitutions and terms up to second order are calculated.     

多孔材料中声波的传播与演化

采用两相多孔介质的拉格朗日模型来描述一种理论流体充填的多孔弹性固体材料,其中孔隙度的变化满足一个附加的平衡方程。     

Effects of magnetohydrodynamic flow past a vertical plate with variable surface temperature

An analysis is performed to study the magnetohydrodynamic flow of an electrically conducting, viscous incompressible fluid past a semi-infinite vertical plate with variable surface temperature under the action of transversely applied magnetic field. The heat due to viscous dissipation and the induced magnetic field are assumed to be negligible. The dimensionless governing equations are unsteady, two-dimensional, coupled and non-linear governing equations. It is found that the magnetic field parameter has a retarding effect on the velocities of air and water.     

Forced Convection Heat Transfer of Nanofluids in a Porous Channel

This article is concerned with the effects of flow and migration of nanoparticles on heat transfer in a straight channel occupied with a porous medium. Investigation of force convective heat transfer of nanofluids in a porous channel has not been considered completely in the literature and this challenge is generally considered to be an open research topic that may require more study. The fully developed flow and steady Darcy?CBrinkman?CForchheimer equation is employed in porous channel. The thermal equilibrium model is assumed between nanofluid and solid phases. It is assumed that the nanoparticles are distributed non-uniformly inside the channel. As a result the volume fraction distribution equation is also coupled with governing equations. The effects of parameters such as Lewis number, Schmidt number, Brownian diffusion, and thermophoresis on the heat transfer are completely studied. The results show that the local Nusselt number is decreased when the Lewis number is increased. It is observed that as the Schmidt number is increased, the wall temperature gradient is decreased and as a consequence the local Nusselt number is decreased. The effects of Lewis number, Schmidt number, and modified diffusivity ratio on the volume fraction distribution are also studied and discussed.     

Free convection effects on a vertical cone with variable viscosity and thermal conductivity

The present paper deals with a flow of a viscous incompressible fluid along a heated vertical cone, with due allowance for variations of viscosity and thermal diffusivity with temperature. The fluid viscosity is assumed to be an exponential function of temperature, and the thermal diffusivity is assumed to be a linear function of temperature. The governing equations for laminar free convection of the fluid are transformed into dimensionless partial differential equations, which are solved by a finite difference method with the Crank–Nicolson implicit scheme. Dependences of the flow parameters on the fluid viscosity and thermal conductivity are obtained.     

Effects of Anisotropy and Drying Air Parameters on Drying of Deformable Porous Media Hydro-Dynamically and Thermally Anisotropic

The purpose of this work was to investigate numerically the drying of saturated deformable porous media. The considered sample is a rectangular porous plate which assumed to be both hydro-dynamically and thermally anisotropic, while the mechanical behavior of the sample is supposed to be isotropic. All walls of the plate are subjected to a convective heat flux. Moreover, the top and bottom walls are allowed the mass transfer. The Darcy–Brinkman extended model was used as the momentum balance equation for the liquid and solid phases. The energy balance equation is based on the local thermodynamic equilibrium assumption between the both phases. The lattice Boltzmann method is used to solve the governing differential equation system. A comprehensive analysis of the effect of anisotropy and the drying air parameters on macroscopic fields is investigated throughout this work.     

Magnetothermoelastic stress and perturbation of magnetic field vector in a functionally graded hollow sphere

In this article, a closed-form solution for one-dimensional magnetothermoelastic problem in a functionally graded material (FGM) hollow sphere placed in uniform magnetic and temperature fields subjected to an internal pressure is obtained using the infinitesimal theory of magnetothermoelasticity. Hyper-geometric functions are employed to solve the governing equation. The material properties through the graded direction are assumed to be nonlinear with an exponential distribution. The nonhomogeneity of the material in the radial direction is assumed to be exponential. The temperature, displacement and stress fields and the perturbation of magnetic field vector are determined and compared with those of the homogeneous case. Hence, the effect of inhomogeneity on the stresses and the perturbation of magnetic field vector distribution are demonstrated. The results of this study are applicable for designing optimum FGM hollow spheres.     

The role of spinodal region in the kinetics of lattice phase transitions

We consider a one-dimensional chain of phase-transforming springs with harmonic long-range interactions. The nearest-neighbor interactions are assumed to be trilinear, with a spinodal region separating two material phases. We derive the traveling wave solutions governing the motion of an isolated phase boundary through the chain and obtain the functional relation between the driving force and the velocity of a phase boundary which can be used as the closing kinetic relation for the classical continuum theory. We show that a sufficiently wide spinodal region substantially alters the phase boundary kinetics at low velocities and results in a richer solution structure, with phase boundaries emitting short-length lattice waves in both direction. Numerical simulations suggest that solutions of the Riemann problem for the discrete system converge to the obtained traveling waves near the phase boundary.     

Nonlinear motions of beam-mass structure

We study the planar dynamic response of a flexible L-shaped beam-mass structure with a two-to-one internal resonance to a primary resonance. The structure is subjected to low excitation (mili g) levels and the resulting nonlinear motions are examined. The Lagrangian for weakly nonlinear motions of the undamped structure is formulated and time averaged over the period of the primary oscillation, leading to an autonomous system of equations governing the amplitudes and phases of the modes involved in the internal resonance. Later, modal damping is assumed and modal-damping coefficients, determined from experiments, are included in the analytical model. The locations of the saddle-node and Hopf bifurcations predicted by the analysis are in good agreement, respectively, with the jumps and transitions from periodic to quasi-periodic motions observed in the experiments. The current study is relevant to the dynamics and modeling of other structural systems as well.     

Hydromagnetic flow and heat transfer adjacent to a stretching vertical sheet with prescribed surface heat flux

The similarity solution for the problem of mixed convection boundary layer flow adjacent to a stretching vertical sheet in an incompressible electrically conducting fluid in the presence of a transverse magnetic field is presented. It is assumed that the sheet is stretched with a power-law velocity and is subjected to a variable surface heat flux. The governing partial differential equations are first transformed into a system of non-linear ordinary differential equations, before being solved numerically by the Keller-box method. The numerical results obtained are then compared with previously reported cases available in the literature as well as the series solution for certain values of parameters, to support their validity. The effects of the governing parameters on the flow field and heat transfer characteristics are obtained and discussed.     

MHD flow and heat transfer over a stretching surface with variable thermal conductivity and partial slip

In this paper we analyze the flow and heat transfer of an MHD fluid over an impermeable stretching surface with variable thermal conductivity and non-uniform heat source/sink in the presence of partial slip. The governing partial differential equations of the problem are reduced to nonlinear ordinary differential equations by using a similarity transformation. The temperature boundary conditions are assumed to be linear functions of the distance from the origin. Analytical solutions of the energy equations for Prescribed Surface Temperature (PST) and Prescribed Heat Flux (PHF) cases are obtained in terms of a hypergeometric function, without applying the boundary-layer approximation. The effects of the governing parameters on the flow and heat transfer fields are presented through tables and graphs, and they are discussed. Furthermore, the obtained numerical results for the skin friction, wall-temperature gradient and wall temperature are analyzed and compared with the available results in the literature for special cases.     

Accelerated supersonic motion of a plate with a finite angle of attack

The article considers the supersonic unsteady-state motion of a plate with a finite (but infinitely small) angle of attack with an associated shock wave in an ideal gas. The laws governing the change of the velocity and the angle of inclination of the plate are assumed to be arbitrary, and the Strouhal numbers are assumed to be small. Under the latter assumption and with Mach numbers in the perturbed region not too close to unity, the prehistory of the motion is sufficiently well described by the instantaneous values of the parameters of the unsteady state and their derivatives. This fact permits a considerable simplification of the equations describing the perturbed unsteady-state motion, and an analytical solution.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 70–75, July–August, 1970.     

Electroelastic field of a piezoelectric annular finite cylinder

This paper presents a theoretical study of a piezoelectric annular cylinder under axisymmteric electromechanical loading. The piezoelectric material is assumed to be transversely isotropic and the general solutions of the governing equations are obtained in terms of a Fourier–Bessel series containing Bessel functions of the first and second kind. The boundary-value problems for vertical pressure and an electric charge loading applied to the ends of an annular cylinder are solved by expanding the applied loading in terms of a Fourier–Bessel series. Selected numerical results for the electroelastic field of an annular cylinder are presented for different aspect ratios of a cylinder and material properties.     

Capillary cavity flow past a circular cylinder

Cavity flow past a circular cylinder is considered accounting for the surface tension on the cavity boundary. The fluid is assumed to be inviscid and incompressible, and the flow is assumed to be irrotational. The solution is based on two derived governing expressions, which are the complex velocity and the derivative of the complex potential defined in an auxiliary parameter region. An integral equation in the velocity magnitude along the free surface is derived from the dynamic boundary condition. The Brillouin–Villat criterion is employed to determine the location of the point of flow separation. The cases of zero surface tension and zero cavitation number are obtained as limiting cases of the solution. Numerical results concerning the effects of surface tension and cavitation development on the cavity detachment, the drag force and the geometry of the free boundaries are presented over a wide range of the Weber and the cavitation numbers.