Tomatidine-stimulated maturation of human embryonic stem cell-derived cardiomyocytes for modeling mitochondrial dysfunction

Human embryonic stem cell-derived cardiomyocytes (hESC-CMs) have been reported to exhibit immature embryonic or fetal cardiomyocyte-like phenotypes. To enhance the maturation of hESC-CMs, we identified a natural steroidal alkaloid, tomatidine, as a new substance that stimulates the maturation of hESC-CMs. Treatment of human embryonic stem cells with tomatidine during cardiomyocyte differentiation stimulated the expression of several cardiomyocyte-specific markers and increased the density of T-tubules. Furthermore, tomatidine treatment augmented the number and size of mitochondria and enhanced the formation of mitochondrial lamellar cristae. Tomatidine treatment stimulated mitochondrial functions, including mitochondrial membrane potential, oxidative phosphorylation, and ATP production, in hESC-CMs. Tomatidine-treated hESC-CMs were more sensitive to doxorubicin-induced cardiotoxicity than the control cells. In conclusion, the present study suggests that tomatidine promotes the differentiation of stem cells to adult cardiomyocytes by accelerating mitochondrial biogenesis and maturation and that tomatidine-treated mature hESC-CMs can be used for cardiotoxicity screening and cardiac disease modeling.Subject terms: Heart failure, Embryonic stem cells, Stem-cell differentiation     

Evaluation of natural gamma radiation and absorbed gamma dose in soil and rocks of Perambalur district (Tamil Nadu,India)

The activity concentrations and absorbed gamma dose of primordial radionuclides ²³⁸U, ²³²Th and ⁴⁰K were determined employing γ-ray spectrometry in 31 soil samples from the land area earmarked for house construction in Perambalur district and 14 rock samples from quarries that supply stones for the entire district. The soil samples registered relatively a higher mean value of 13.2 Bq kg^?1 for ²³⁸U, 66 Bq kg^?1 for ²³²Th and 340.3 Bq kg^?1 for ⁴⁰K as compared to mean values for rock samples (²³⁸U—8.0 Bq kg^?1; ²³²Th—65.1 Bq kg^?1; ⁴⁰K—199.1 Bq kg^?1). The mean absorbed gamma dose rate for soil (61.4 nGy h^?1) marginally exceeded the prescribed limit of 55 nGy h^?1 while, rocks registered the mean absorbed gamma dose rate of 10.4 nGy h^?1. The mean radium equivalent activity was distinctly higher in soil (130.6 Bq kg^?1) than in rock (20.0 Bq kg^?1). However, these values were lower than the limit (370 Bq kg^?1) set by OECD for building materials. It is evident from the data that the soil and rocks do not pose any radiological risk for house constructions in Perambalur district.     

Modified Hyaluronan Hydrogels Support the Maintenance of Mouse Embryonic Stem Cells and Human Induced Pluripotent Stem Cells

These studies provide evidence for the ability of a commercially available, defined, hyaluronan‐gelatin hydrogel, HyStem‐C?, to maintain both mouse embryonic stem cells (mESCs) and human induced pluripotent stem cells (hiPSCs) in culture while retaining their growth and pluripotent characteristics. Growth curve and doubling time analysis show that mESCs and hiPSCs grow at similar rates on HyStem‐C? hydrogels and mouse embryonic fibroblasts and Matrigel?, respectively. Immunocytochemistry, flow cytometry, gene expression and karyotyping reveal that both human and murine pluripotent cells retain a high level of pluripotency on the hydrogels after multiple passages. The addition of fibronectin to HyStem‐C? enabled the attachment of hiPSCs in a xeno‐free, fully defined medium.

     

Properties of human parotid amylase immobilized by covalent binding to glass or sepharose or by reaction with immobilized antibody

Human parotid amylase was immobilized by covalent binding to CNBr-activated Sepharose, to Corning GAO-3940 silica glass biomaterial support by the diazonium reaction or reaction with glutaraldehyde, or as a result of the antigen-antibody reaction between rabbit antihuman parotid amylase IgG that was covalently bonded to GAO glass and soluble amylase. The amylase directly bonded to the supports showed constant activity at flow rates of 3-15 ml/min through a 1.76-cm³ (8-mm diameter) support bed, did not lose enzyme into a circulating starch solution, retained its activity in the presence of soluble antiamylase IgG, was optimally active at 35°-40°C, and lost activity at 40°-45°C. When the enzyme was bound by interaction with immobilized antibody, full activity was expressed, but some enzyme was solubilized by a circulating starch solution. Immobilization of either amylase or antiamylase IgG makes dissolution of the antigen-antibody bond difficult.     

Enhanced Expression of GCRV VP6 in CIK Cells by Relative Sequence Optimization

Efficient expression of target protein is one of strategies for gene therapy or vaccine design. Many studies showed that codon optimization could enhance the expression of target proteins. In this paper, a target sequence of about 1.26 kb encoding the major capsid protein VP6 of grass carp reovirus (GCRV) and an optimized counterpart were synthesized and inserted into vectors for expressing VP6. The final constructs (named as pcDV6G and pcDV6YG) were transfected in Ctenopharyngodon idellus kidney (CIK) cells. The fluorescence analysis and the Western blot results showed that the gene fragment was transfected and expressed in CIK cells successfully. Although the qRT-PCR results showed no difference at the messenger RNA (mRNA) levels between the different versions of vp6 in the indicated stages, the enzyme-linked immunosorbent assay (ELISA) results showed that the protein level of VP6 expressed by pcDV6YG was higher than that by pcDV6G in the indicated hours. Taken together, these results suggest that the enhanced expression of GCRV VP6 in CIK cells by relative sequence optimization may be a good choice for making DNA vaccine against GCRV.     

Interactions of collagen and cellulose in their blends with 1-ethyl-3-methylimidazolium acetate as solvent

Collagen/cellulose blended solutions with collagen/cellulose mass ratio (Col/Cel) of 0, 1/40, 1/20, 1/10 and 1/5 were prepared using [Emim]Ac as solvent. The interactions between the two polymers before and after regeneration were investigated. In steady shear flow, all of the experimental viscosity values were greater than those of the estimated values calculated from the log-additivity rule for each sample, suggesting interactions between the two polymers in solutions. All solutions exhibited shear thinning behavior and the flow curves could be described by Cross model. Zero shear viscosity (η ₀) versus Col/Cel was examined and a linear increase (from 8.73 to 16.39 Pa·s) can be observed for η ₀ as Col/Cel ≤ 1/10, while there was only a slight increase (from 16.39 to 18.42 Pa·s) in η ₀ as Col/Cel increased to 1/5. Dynamic rheology results suggested the existence of aggregates in solution with Col/Cel = 1/10. Furthermore, the activation energy of solution was 84.5 kJ mol^?1 as Col/Cel = 1/10, higher than that of cellulose solution (44.2 kJ mol^?1). Regenerated films were prepared and characterized to trace back the interactions between the two polymers in [Emim]Ac. Fourier transform infrared spectroscopy indicated the hydrogen-bond interaction between collagen and cellulose in films. The denaturation temperature of collagen in films with Col/Cel ≤ 1/10 could be improved, but it was decreased with the increase of collagen content, and finally was reduced to be close to that of collagen as Col/Cel = 1/5. The features of dynamic mechanical analysis for films were indicative of the lack of homogeneity between collagen and cellulose as Col/Cel = 1/5. Atomic force microscopy images further confirmed the phase-separation when Col/Cel = 1/5.     

Parameter evaluation,kinetics, and energy consumption for Cr(VI) photocatalytic reduction under mild conditions

Photocatalytic reduction of hexavalent chromium, Cr(VI), ions in aqueous solutions was studied using remarkably low doses of commercial titania nanoparticles at conventional temperature range of 15–45 °C. A direct imposed irradiation photo-reactor, equipped with ultrasonic source was utilized. Design of experiments, correlating and process optimization were performed using central composite design of response surface methodology. Accordingly, a reduced quadratic expression was developed to predict the reduction efficiency as a function of involved parameters. Analysis of variance shows the agreement of the provided model with experimental data. At the found optimum conditions of titania concentration: 33.1 mg/L, pH: 2.50, temperature: 36 °C and reaction time: 120 min; 81 % efficiency was achieved for reduction of initial 5 mg/L of Cr(VI). The process revealed proceeding through parallel branches of photolysis and photocatalysis, and only UV irradiation was promising for reaction progress. Based on differential method of analysis, the relevant kinetic model, jointed with the Arrhenius equation, was introduced. Energy (electrical and thermal) consumption evaluations revealed that treatment at higher temperatures provides a significant cost reduction. Meantime, a criterion was proposed for a more valid assessment of photocatalytic processes.     

Effect of Lactoferrin on Odontogenic Differentiation of Stem Cells Derived from Human 3rd Molar Tooth Germ

Stem cell technology has been a great hope for the treatment of many common tissue regeneration-related diseases. Therefore, the main challenge in hard tissue engineering is to make a successful combination of stem cells and efficient inductors such as biomaterials or growth factors, in the concept of stem cell conversion into odontogenic cell. Even though lactoferrin has been reported to promote bone growth in vivo, the molecular mechanism of teeth formation has not been elucidated yet. Different concentrations of lactoferrin were prepared for the analysis of cell toxicity and differentiation evaluations. The odontogenic differentiation of human tooth germ stem cells (hTGSCs) was assessed by gene expression analysis, determination of protein levels in odontogenic differentiation-related protein, measuring alkaline phosphatase (ALP) activity, mineralization, and calcium deposit levels. Lactoferrin-treated group showed the highest ALP activity as opposed to the other groups which were untreated. In addition, the gene expression levels as well as the protein levels of odontogenic factors were found to be high in compared to the control groups. In the current study, it is shown for the first time that there is a significant increase in odontogenic differentiation capacity in hTGSCs when lactoferrin is applied in vitro. The study offers a considerable promise for the development of pulp regeneration by using stem cell technology combined with lactoferrin in functional tooth tissue engineering.     

Ion beam irradiation of ZnS dispersed in PMMA and its photocatalytic application

ZnS nanoparticles implanted with 45 keV O⁵⁺ ion beam exhibited 83.6 % degradation of methyl blue in 2 h. This idea was utilized to fabricate nanocomposite system of ZnS and PMMA where ZnS nanoparticles were immobilized in PMMA film and irradiated with 45 keV O⁵⁺ ion beam at particle fluence of 2.5 × 10¹⁵, 1 × 10¹⁶ and 4 × 10¹⁶ particles/cm². These irradiated batches of ZnS nanoparticle immobilized in PMMA batches revealed formation of porous structure characterized by scanning electron microscopy and these batches exhibited 54 % photocatalytic degradation of methyl blue in 80 min which was higher as compared to the pristine ZnS nanoparticles.     

Identification of Heat-Related ESTs in Moth Bean Through Suppression Subtraction Hybridization

Moth bean (Vigna aconitifolia (Jacq.) Marechal), an important grain-legume crop grown in hot desert regions of Thar, under scorching sun rays, was investigated for heat tolerance at molecular level. In the present study, we constructed a forward suppression subtractive hybridization (SSH) cDNA library of heat tolerant genotype RMO-40 to identify genes expressing under delayed response to elevated temperature. Heat induction was carried out by exposing 14-day-old seedlings to elevated temperature of 42 °C for 30 min. A total of 125 unigenes (33 contigs and 92 singletons) were derived by cluster assembly and sequence alignment of 200 ESTs; out of 125 unigenes, 21 (16 %) were found to be novel to moth bean. Gene ontology functional classification terms were retrieved for 98 (78.4 %) unigenes of which 73 (58.4 %) ESTs were functionally annotated (GO consensus) where 19 unigenes were annotated with 11 enzyme commission (EC) codes and were mapped to 25 different KEGG pathways. We have identified a majority of heat-shock proteins (constituting 35 % of the present library) aiding heat stress tolerance to moth bean. An expression level of 22 ESTs generated from the above SSH cDNA library was studied through semiquantitative RT-PCR assay simultaneously under 5 and 30 min of heat stress at 42 °C.     

Aminophylline: thermal characterization and its inhibitory properties for the carbon steel corrosion in acidic environment

Aminophylline (AMF) was studied as corrosion inhibitor for carbon steel in 1.0 mol L^?1 HCl solution using electrochemical measurements associated with UV–Vis spectrophotometry and optical microscopy. Simultaneous thermogravimetry/derivative thermogravimetry and differential scanning calorimetry analysis was performed in order to determine the temperature range in which AMF is an effective inhibitor, without the decomposition risk that could change the inhibition mechanism. Thermal behaviour restricts AMF application as corrosion inhibitor for carbon steel in 1.0 mol L^?1 HCl solution at temperatures ≤45 °C where there are no significant modifications of the adsorption mechanism. According to the results of electrochemical measurements, in association with UV–Vis spectrophotometry and optical microscopy techniques, AMF is a mixed-type inhibitor for carbon steel corrosion in 1.0 mol L^?1 HCl solution, simultaneously suppressing the anodic and cathodic processes and acting via spontaneous physisorption on the metal surfaces.     

Preparation and characterization of electrospun nanofiber-coated membrane separators for lithium-ion batteries

Nanofiber-coated membrane separators were prepared by electrospinning polyvinylidene fluoride-co-chlorotrifluoroethylene (PVDF-co-CTFE) nanofibers onto three different microporous membrane substrates. The nanofibers on the membrane substrates showed uniform morphology with average fiber diameters ranging from 129 to 134 nm. Electrolyte uptakes, ionic conductivities, and interfacial resistances were studied by soaking the nanofiber-coated membrane separators with a liquid electrolyte solution of 1 M lithium hexafluorophosphate in ethylene carbonate/dimethylcarbonate/ethylmethyl carbonate (1:1:1 by volume). Compared with uncoated membranes, nanofiber-coated membranes had greater electrolyte uptakes and lower interfacial resistances to the lithium electrode. It was also found that after soaking in the liquid electrolyte solution, nanofiber-coated membranes exhibited higher ionic conductivities than uncoated membranes. In addition, lithium-ion half cells containing nanofiber-coated membranes were evaluated with a LiFePO₄ cathode for charge–discharge capacities and cycle performance. The cells containing a nanofiber-coated separator membrane showed high discharge specific capacities and good cycling stability at room temperature. Results demonstrated that coating PVDF-co-CTFE nanofibers onto microporous membrane substrates is a promising approach to obtain new and high-performance separators for rechargeable lithium-ion batteries.     

High-level Expression of a Manganese Superoxide Dismutase (PoMn-SOD) from Pleurotus ostreatus in Pichia pastoris

The full-length cDNA of Pleurotus ostreatus superoxide dismutase (PoMn-SOD) was cloned and successfully expressed by using the pPIC9K vector under the control of alcohol oxidase 1 promoter with a secretion signal peptide (α-factor) in Pichia pastoris. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blotting demonstrated that recombinant PoMn-SOD, a 21.8 kDa protein, was secreted into the culture medium. Nondenaturing PAGE experiments confirmed that recombinant PoMn-SOD was secreted in a functionally active form and the expression system did not require any acid activation process. The factors affecting the expression level were optimized in shaking flask cultures. The maximum enzyme activity (156.9 U/mg) was observed under the following conditions: Initial medium pH was 6.0, induction time point was at the 6th day, and methanol concentration was 0.7 % (v/v). This was the first report on secretory expression of recombinant PoMn-SOD in P. pastoris, which might provide a reference for further practical applications.     

Determination of methylisothiocyanate in soil and water by HS-SPME followed by GC–MS–MS with a triple quadrupole

Methylisothiocyanate (MITC) is the main degradation product of metam sodium, a soil disinfectant widely used in agriculture, and is responsible for its disinfectant properties. Because MITC is highly toxic and volatile, metam sodium has to be applied in a manner that tries to reduce atmospheric emissions but still maintains adequate concentration of MITC in soil to ensure its disinfectant effect. Thus, monitoring of MITC concentrations in soil is required, and to this end sensitive, fast, and reliable analytical methods must be developed. In this work, a headspace solid-phase microextraction (HS-SPME) method was developed for MITC determination in water and soil samples using gas chromatography-tandem mass spectrometry (GC–MS–MS) with a triple-quadrupole analyzer. Two MS–MS transitions were acquired to ensure the reliable quantification and confirmation of the analyte. The method had linear behavior in the range tested (0.026–2.6 ng mL^?1 in water, 1–100 ng g^?1 in soil) with r ² over 0.999. Detection limits were 0.017 ng mL^?1 and 0.1 ng g^?1 in water and soil, respectively. Recoveries for five replicates were in the range 76–92 %, and RSD was below 7 % at the two spiking levels tested for each matrix (0.1 and 1 ng mL^?1 for water, 4 and 40 ng g^?1 for soil). The potential of using multiple HS-SPME for analyzing soil samples was also investigated, and its feasibility for quantification of MITC evaluated. The developed HS-SPME method was applied to soil samples from experimental plots treated with metam sodium following good agriculture practices. Figure

?     

Reference gene stability in peripheral blood mononuclear cells determined by qPCR and NanoString

Quantitative real-time PCR (qPCR) is commonly used for gene expression analyses with defined documentation guidelines to compare published results. To minimize the impact of variances from qPCR performance, sample handling and processing reference genes are used. Their selection process cannot be completely aligned due to variations in experimental conditions. Furthermore, the named sources of error are also present when determining the stability of the reference genes themselves. Even software applications that are used to identify the best reference genes rarely coincide on their rankings and can be misleading under certain conditions. In previous experiments, peripheral blood mononuclear cells (PBMC) were analyzed to identify the most stable reference gene(s). Twelve of the 13 investigated genes showed sample type specific differences in the expression. Direct mRNA measurement was performed in the form of a NanoString analysis, a multiplexed absolute quantification method. The external validation showed a high concordance of the reference gene expression levels. However, it identified the same sample type specific expression pattern for only some of the tested reference genes. By comparing various combinations of reference genes with both methods we are able to suggest a set of well-performing reference genes. Figure

We here compare the expression of reference genes for qPCR and NanoString data and determine the value of the latter method as a bias-free mRNA quantification method     

Apoptosis in BEL-7402 cells induced by ruthenium(II) complexes through a ROS-mediated mitochondrial pathway

Three Ru(II) polypyridyl complexes [Ru(dmb)₂(HMSPIP)](ClO₄)₂ (1), [Ru(phen)₂(HMSPIP)](ClO₄)₂ (2) and [Ru(dmp)₂(HMSPIP)](ClO₄)₂ (3) were synthesized and characterized. The cytotoxicity in vitro, apoptosis, cell cycle arrest, reactive oxygen species and mitochondrial membrane potential were assayed. The IC₅₀ values of complexes 1, 2 and 3 toward BEL-7402, A549, MG-63 and SK-BR-3 cell lines ranged from 10.9 ± 1.6 to 42.0 ± 3.4 μM. Complexes 1, 2 and 3 can effectively induce apoptosis and inhibit the growth of BEL-7402 cells at the G2/M phase. These complexes can enhance the level of reactive oxygen species and induce decrease in the mitochondrial membrane potential. Additionally, complex 2 can down-regulate the expression of antiapoptotic protein of Bcl-2 protein and up-regulate the levels of proapoptotic protein Bim in BEL-7402 cells.     

A wide range optical pH sensor for living cells using Au@Ag nanoparticles functionalized carbon nanotubes based on SERS signals

p-Aminothiophenol (pATP) functionalized multi-walled carbon nanotubes (MWCNTs) have been demonstrated as an efficient pH sensor for living cells. The proposed sensor employs gold/silver core-shell nanoparticles (Au@Ag NPs) functionalized MWCNTs hybrid structure as the surface-enhanced Raman scattering (SERS) substrate and pATP molecules as the SERS reporters, which possess a pH-dependent SERS performance. By using MWCNTs as the substrate to be in a state of aggregation, the pH sensing range could be extended to pH 3.0～14.0, which is much wider than that using unaggregated Au@Ag NPs without MWCNTs. Furthermore, the pH-sensitive performance was well retained in living cells with a low cytotoxicity. The developed SERS-active MWCNTs-based nanocomposite is expected to be an efficient intracellular pH sensor for bio-applications.