Calculation of molecular electric polarizabilities and dipole moments. III. BH molecule

We use a previously proposed variation-perturbation method to calculate the electric polarizabilities and the electric dipole moment at equilibrium nuclear distance of the BH molecule. We obtain 3.56 × 10^?24 cm³ for the perpendicular polarizability α_xx and 3.22 × 10^?24 cm³ for the parallel polarizability α_zz. Our result for the electric dipole moment μ₀ is 1.734 debye units; there is no reliable experimental result to compare it with.     

Variation of the Intersection Point of the Potential Surface Crossing Induced by the Laser Phase Along the Reaction Path in Ion-Molecule Reactions: Application To Li<Superscript>+</Superscript> + CH<Subscript>4</Subscript>

A laser ion-molecule reaction interaction through both polarizability and dipole moment contribution leads to variation in the intersection point in potential energy surface crossings along the reaction path; the polarizability is maximum and the dipole changes its sign at s = 4 a.u., defining a virtual transition state. Using the gauge representation (electric field gauge) for a wave length λ = 20.6 μm, intensity I = 5×10¹² W/cm², I = 1×10¹³ W/cm², I = 3×10¹³ W/cm², we show here that we can create a laser-induced potential energy surface crossing along the reaction path (s = 7-8 a.u.). We illustrate such effects for the Li H + CH ₃ ⁺ ? Li⁺ + CH₄ reaction which takes the form of inverted Morse (without a barrier) using ab initio methods for calculating the reaction path and electric properties of the ion-molecule reaction.     

Calculation of molecular electric polarizabilities and dipole moments. II. The LiH molecule

We use a variation–perturbation method to calculate the electric polarizabilities and the electric dipole moment of the LiH molecule. We obtain 4.455 for the perpendicular polarizability and 4.001 (×10^?24 cm³) for the parallel polarizability. Our result for the electric dipole moment at equilibrium nuclear distance is 5.866, which is in excellent agreement with the experimental value 5.828 debye units.     

Production of O− from CO2 by dissociative electron attachment

Dissociative electron attachment cross-section measurements for the production of O^? from CO₂ have been performed utilizing a crossed target-beam—electron-beam collision geometry and a quadrupole mass spectrometer. The relative flow technique is employed to determine the absolute values of cross sections. The attachment energies corresponding to the five cross-section maxima are: 4.4 ± 0.1, 8.2 ± 0.1, 13.0 ± 0.2, 16.9 ± 0.2 and 19.4 ± 0.2 eV. The cross sections at these maxima are: 1.43 × 10^?19 cm², 4.48 × 10^?19 cm², 8.1 × 10^?21 cm², 8.1 × 10^?21 cm² and 1.2 × 10^?20 cm², respectively.     

Temperature‐dependent rate coefficients and mechanism for the gas‐phase reaction of chlorine atoms with acetone

The rate coefficient for the gas‐phase reaction of chlorine atoms with acetone was determined as a function of temperature (273–363 K) and pressure (0.002–700 Torr) using complementary absolute and relative rate methods. Absolute rate measurements were performed at the low‐pressure regime (～2 mTorr), employing the very low pressure reactor coupled with quadrupole mass spectrometry (VLPR/QMS) technique. The absolute rate coefficient was given by the Arrhenius expression k(T) = (1.68 ± 0.27) × 10^?11 exp[?(608 ± 16)/T] cm³ molecule^?1 s^?1 and k(298 K) = (2.17 ± 0.19) × 10^?12 cm³ molecule^?1 s^?1. The quoted uncertainties are the 2σ (95% level of confidence), including estimated systematic uncertainties. The hydrogen abstraction pathway leading to HCl was the predominant pathway, whereas the reaction channel of acetyl chloride formation (CH₃C(O)Cl) was determined to be less than 0.1%. In addition, relative rate measurements were performed by employing a static thermostated photochemical reactor coupled with FTIR spectroscopy (TPCR/FTIR) technique. The reactions of Cl atoms with CHF₂CH₂OH (3) and ClCH₂CH₂Cl (4) were used as reference reactions with k₃(T) = (2.61 ± 0.49) × 10^?11 exp[?(662 ± 60)/T] and k₄(T) = (4.93 ± 0.96) × 10^?11 exp[?(1087 ± 68)/T] cm³ molecule^?1 s^?1, respectively. The relative rate coefficients were independent of pressure over the range 30–700 Torr, and the temperature dependence was given by the expression k(T) = (3.43 ± 0.75) × 10^?11 exp[?(830 ± 68)/T] cm³ molecule^?1 s^?1 and k(298 K) = (2.18 ± 0.03) × 10^?12 cm³ molecule^?1 s^?1. The quoted errors limits (2σ) are at the 95% level of confidence and do not include systematic uncertainties. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 724–734, 2010     

THE EPR SPECTRA OF TETRADENTATE SCHIFF BASE COMPLEXES OF COPPER (II) I. N,N'-Bis-(acetylacetone) ethylenediimine and N,N'-Bis-(1,1,1-trifluoroacetylacetone) ethylenediimine

Abstract

The EPR spectrum of N, N'-bis-(acetylacetone)ethylenediimino Cu(II), [Cu-en(acac)₂], and N, N'-bis-(1,1,1-trifluoroacetylacetone)ethylenediimino-Cu(II), [Cu-en(tfacac)₂], have been studied in doped single crystals of the corresponding Ni(II) chelate. The parameters in the usual doublet spin-Hamiltonian are found to be: Cu[en(acac)₂], g_z =2.183 ± 0.003, g_x =2.047 ± 0.004, g_y =2.048 ± 0.004, A_z =204.8 × 10^?4cm^?1, A_x =31.5 × 10^?4cm^?1, A_y =27.1 × 10^?4 cm^?1, A_zN= 12.8 × 10^?4 cm^?1 and A_xN =A_yN =14.3 × 10^?4 cm^?1: Cu[en(tfacac)₂], g_z =2.192 ± 0.002, g_x =2.048 ± 0.004, g_y =2.046 ± 0.004, A_z =200.8 × 10^?4 cm^?1, A_x =31.1 × 10^?4 cm^?1, A_y =28.3 × 10^?4 cm^?1, A_zN =12.8 × 10^?4 cm^?1 and A_xN =A_yN =14.6 × 10^?4 cm^?1. These parameters are related to coefficients in the molecular orbitals of the complex. It is found that the α-bonding is quite covalent and there is significant in-plane σ-bonding. From the nitrogen hyperfine structure it is determined that the hybridization on the nitrogen is sp².     

Reactions of the IO· radical resulting in hydrogen atom abstraction from halogen-containing molecules

A jet-stream kinetic technique and the resonance fluorescence method applied to detection of iodine atoms were used to measure the rate constants of the reactions of the IO^· radical with the halohydrocarbons CHFCl-CF₂Cl (k = (3.2 ± 0.9) × 10^?16 cm³ molecule s^?1) and CH₂ClF (k = (9.4 ± 1.3) × 10^?16 cm³ molecule s^?1), the hydrogen-containing haloethers CF₃-O-CH₃ (k = (6.4 ± 0.9) × 10^?16 cm³ molecule s^?1) and CF₃CH₂-O-CHF₂ (k = (1.2 ± 0.6) × 10^?15 cm³ molecule s^?1), and hydrogen iodide (k = (1.3 ± 0.9) × 10^?12 cm³ molecule s^?1) at 323 K.     

Spectrophotometric study of complexes of mercury(II) with mono- and dithiosemicarbazones

The formation of complexes at pH 4.7 of the Hg(II) with five monothiosemicarbazone and two dithiosemicarbazone has been studied. The mercury(II) reacts with monothiosemicarbazones of salicylaldehyde (λ_max = 363 nm, E = 1.69 × 10⁴liters · mol^?1cm^?1), pi-colinadehyde (λ_max = 363 nm, E = 2.38 × 10⁴liters · mol^?1cm^?1), 6-methyl-picolinaldehyde (λ_max = 363 nm, E = 2.28 × 10⁴liters · mol^?1cm^?1), di-2-pyridylketone (λ_max = 380 nm, E = 2.08 × 10⁴liters · mol^?1cm^?1), and o-naphthoquinone (λ_max = 540 nm, E = 1.03 × 10⁴liters · mol^?1cm^?1) and with dithiosemicarbazones of 1,4-dihydroxyphthalimide (λ_max = 430 nm, E = 2.56 × 10⁴liters · mol^?1cm^?1) and dipyridylglyoxal (λ_max = 363 nm, E = 2.37 × 10⁴liters · mol^?1cm^?1). A critical comparison of the stoichiometry and apparent stability constant of complexes with mono- and dithiosemicarbazones is given.     

THE EPR SPECTRA OF TETRADENTATE SCHIFF BASE COMPLEXES OF COPPER (II) II. N,N'-bis(salicylidene)ethylenediimine and 7-methyl-N,N'-bis (salicylidene)ethylenediimine

Abstract

The EPR spectra of single crystals of ⁶³Cu(II) doped N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(sal)₂en] and 7-methyl-N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(7-me sal)₂en] have been studied. The usual doublet spin-Hamiltonian parameters for the complexes have been found to be: Cu(II)[(sal)₂en]; g _z =2.192 ± 0.002; g _x =2.046 ± 0.004; g _y =2.049 ± 0.004; A _z =201.0 × 10^?4 cm^?1; A _x =29.3 × 10^?4 cm^?1; A _y =31.3 × 10^?4 cm^?1; A^N _z =12.6 × 10^?4 cm^?1; A ^N _x =14.5 × 10^?4 cm^?1; A ^N _y =15.7 × 10^?4 cm^?1; A ^H _z =6.3 × 10^?4 cm^?1; A ^H _x =7.3 × 10^?4 cm^?1; A ^H _y =7.9 × 10^?4 cm^?1; Cu(II)[(7-me sal)₂en]; g _z =2.189 ± 0.002; g _x =2.037 ± 0.004; g _y =2.046 ± 0.004; A _z =203.0 × 10^?4 cm^?1; A _x =36.9 × 10^?4 cm^?1; A _y =22.7 × 10^?4 cm^?1; A ^N _z =12.6 × 10^?4 cm^?1; A ^N _x =13.3 × 10^?4 cm^?1; A ^N _y =14.0 × 10^?4 cm^?1. Values of molecular orbital coefficients calculated for these complexes show that their bonding properties are similar to those of other compounds of this type. There is considerable covalency in the metal-ligand [sgrave]-bonds, and significant in-plane pi-bonding is present.     

Interpretation of the optical dephasing time and lineshape function in the S0 → T1 exciton transitions of 1,4-dibromonaphthalene

The lineshape function for the S₀ → T₁ absorption in 1,4-dibromonaphthalene (DBN) is analyzed in terms of exchange theory. It is shown that the dominant optical dephasing mechanism for the electric dipole transition to the k = 0 state in the band results from the absorption and emission of a low energy optic phonon. This process dephases the optical absorption because of frequency differences of the phonon in the ground and excited state. In addition, it is shown how to extract the energy of the phonon responsible for dephasing, the phonon absorption rate, and the lifetime in the phonon promoted state from the data. The analysis of the data for DBN shows that very little dephasing of the optical transition occurs before ≈ 15 K but from 15 K to ≈ 40 K the singlet-triplet transitions to site I (20192 cm^?1) and site II (20245 cm^?1) are dephased by absorption and emission of an ≈ 38 cm^?1 and 45 cm^?1 phonon respectively. The phonon absorption rates by the k = 0 state in the exciton band are similar for both sites being 5 × 10⁶ s^?1 and 3 × 10⁵ s^?1 at 4 K and 7 × 10¹¹ s^?1 and 4 × 10¹¹ s^?1 at 30 K for site I and II respectively. Finally, the lifetimes in the phonon promoted state for sites I and II are 0.23 and 0.28 ps over the range 15–40 K.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Measurements of light scattering changes induced by a strong optical field in solutions of tRNA

Changes in light scattering induced by a strong laser beam, as predicted theoretically by Kielich, were measured for unfractionated yeast transfer ribonucleic acid (tRNA) solutions. The vertically polarized electric field of a strong laser pulse (λ = 1060nm) amounted to 4.5 × 10³ esu cgs; its duration was 10 nsec. A weak incident laser beam (λ = 630nm) was also polarized vertically and the vertical and horizontal intensity components of the light scattered through 90° at the latter wavelength were measured. These measurements together with previous results from measurements of Rayleigh light scattering and light scattering in a magnetic field permitted evaluation of the tensor of third-order polarizability (c = 3 × 10^?30 esu cgs, c = ?373 × 10^?30 esu cgs) and the anisotropy of the third-order polarizability components with its sign (δ_c = +56 × 10^?2, δ_c = +0.25 × 10^?2 for tRNA monomer and aggregate, respectively). The new method described may be useful for studies of macromolecules and macromolecular complexes of biological importance.     

A laser flash photolysis/IR diode laser absorption study of the reaction of chlorine atoms with selected alkanes

A high‐resolution IR diode laser in conjunction with a Herriot multiple reflection flow‐cell has been used to directly determine the rate coefficients for simple alkanes with Cl atoms at room temperature (298 K). The following results were obtained: k(Cl + n‐butane) = (1.91 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐pentane) = (2.46 ± 0.12) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + iso‐pentane) = (1.94 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + neopentane) = (1.01 ± 0.05) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐hexane) = (3.44 ± 0.17) × 10^?10 cm³ molecule^?1 s^?1 where the error limits are ±1σ. These values have been used in conjunction with our own previous measurements on Cl + ethane and literature values on Cl + propane and Cl + iso‐butane to generate a structure activity relationship (SAR) for Cl atom abstraction reactions based on direct measurements. The resulting best fit parameters are k_p = (2.61 ± 0.12) × 10^?11 cm³ molecule^?1 s^?1, k_s = (8.40 ± 0.60) × 10^?11 cm³ molecule^?1 s^?1, k_t = (5.90 ± 0.30) × 10^?11 cm³ molecule^?1 s^?1, with f( ? CH₂^? ) = f (? CH₂^? ) = f (?C?) = f = 0.85 ± 0.06. Tests were carried out to investigate the potential interference from production of excited state HCl(v = 1) in the Cl + alkane reactions. There is some evidence for HCl(v = 1) production in the reaction of Cl with shape n‐hexane. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 34: 86–94, 2002     

Dynamic polarizabilities and raman intensities of CO,N2, HCl and Cl2

We have performed first-order (identical to coupled Hartree-Fock) and second-order polarization propagator calculations of the dynamic dipole polarizability tensor for the CO, N₂, HCl and Cl₂ molecules. The derivatives of the polarizability tensor with respect to the internuclear distance at the equilibrium internuclear separation are compared with related data obtained from non-resonance Raman spectra. In most cases the correlation contributions beyond the coupled Hartree-Fock approximation have a more pronounced effect on the derivatives of the polarizability tensor than on the polarizability tensor itself. At both levels of approximation we found that derivatives of the dynamic polarizability tensor with respect to the internuclear separation increase with 10–15% for variation of the frequency from 0 (static polarizability) to about 28500 cm^?1. The depolarization ratio calculated from the polarizability derivatives shows no variation with frequency in the same frequency range.     

HFS and isotope shift in the atomic spectrum of205Pb

The hfs of²⁰⁵Pb in the 283.3-nm resonance line and its isotope shift (IS) have been measured in absorption with the use of dispersive spectroscopy. A new method for calibration and analysis, when internal standards are not available is described. The results are: hfs interaction constantsA=70.3(5)×10^?3 cm^?1,B=?0.6(1.1)×10^?3 cm^?1,²⁰⁵Pb-²⁰⁸Pb IS=?123.9(2.0)×10^?3 cm^?1. The derived nuclear magnetic dipole moment,μ=0.704(5)μ _N is in good agreement with values calculated with a nuclear configuration mixing model.     

The temperature dependence of the OH radical reactions with some aromatic compounds under simulated tropospheric conditions

The temperature dependence of the rate coefficients for the OH radical reactions with toluene, benzene, o-cresol, m-cresol, p-cresol, phenol, and benzaldehyde were measured by the competitive technique under simulated atmospheric conditions over the temperature range 258–373 K. The relative rate coefficients obtained were placed on an absolute basis using evaluated rate coefficients for the corresponding reference compounds. Based on the rate coefficient k(OH + 2,3-dimethylbutane) = 6.2 × 10^?12 cm³ molecule^?1s^?1, independent of temperature, the rate coefficient for toluene k_OH = 0.79 × 10^?12 exp[(614 ± 114)/T] cm³ molecule^?1 s^?1 over the temperature range 284–363 K was determined. The following rate coefficients in units of cm³ molecule^?1 s^?1 were determined relative to the rate coefficient k(OH + 1,3-butadiene) = 1.48 × 10^?11 exp(448/T) cm³ molecule^?1 s^?1: o-cresol; k_OH = 9.8 × 10^?13 exp[(1166 ± 248)/T]; 301–373 K; p-cresol; k_OH = 2.21 × 10^?12 exp[(943 ± 449)/T]; 301–373 K; and phenol, k_OH = 3.7 × 10^?13 exp[(1267 ± 233)/T]; 301–373 K. The rate coefficient for benzaldehyde k_OH = 5.32 × 10^?12 exp[(243 ± 85)/T], 294–343 K was determined relative to the rate coefficient k(OH + diethyl ether) = 7.3 × 10^?12 exp(158/T) cm³ molecule^?1 s^?1. The data have been compared to the available literature data and where possible evaluated rate coefficients have been deduced or updated. Using the evaluated rate coefficient k(OH + toluene) = 1.59 × 10^?12 exp[(396 ± 105)/T] cm³ molecule^?1 s^?1, 213–363 K, the following rate coefficient for benzene has been determined k_OH = 2.58 × 10^?12 exp[(?231 ± 84)/T] cm³ molecule^?1 s^?1 over the temperature range 274–363 K and the rate coefficent for m-cresol, k_OH = 5.17 × 10^?12 exp[(686 ± 231)/T] cm³ molecule^?1 s^?1, 299–373 K was determined relative to the evaluated rate coefficient k(OH + o-cresol) = 2.1 × 10^?12 exp[(881 ± 356)/T] cm³ molecule^?1 s^?1. The tropospheric lifetimes of the aromatic compounds studied were calculated relative to that for 1,1,1-triclorethane = 6.3 years at 277 K. The lifetimes range from 6 h for m-cresol to 15.5 days for benzene. © 1995 John Wiley & Sons, Inc.     

Far infrared spectrum of silane

The absorption spectrum of SiH₄ from 32 to 400 cm^?1 has revealed two sepasrate bonds,one linear in density and one quadratic.From the linear band,the electric dipole moment produced in the ground vibronic state by centrifugal distortion effects has been estimated to be 9.3 × 10^?6 D in magnitude. From the quadratic band, the molecular octopole moment has been determined to be 3.0 × 10^?34 esu cm³ in magnitude. The simplicity of the techniques used is stressed.     

Absolute rate constants for the reaction of O(3P) aroms with n-butane and NO(M  Ar) over the temperature range 298–439 K

Absolute rate constants for the reaction of O(³P) atoms with n-butane (k₂) and NO(M  Ar)(k₃) have been determined over the temperature range 298–439 K using a flash photolysis-NO₂ chemiluminescence technique. The Arrhenius expressions obtained were k₂ = 2.5 × 10^?11exp[-(4170 ± 300)/RT] cm³ molecule^?1 s^?1, k₃ = 1.46 × 10^?32 exp[940 ± 200)/ RT] cm⁶ molecule^?2 s^?1, with rate constants at room temperature of k₂ = (2.2 ± 0.4) × 10^?14 cm³ molecule^?1 s^?1 and k₃ = (7.04 ± 0.70)×10^?32 cm⁶ molecule^?2 s^?1. These rate constants are compared and discussed with literature values.     

Temperature dependence of the Kerr effect of hydrogen sulphide

The Kerr effect fo gaseous hydrogen sulphide was measured from 254–341 K and (1.5–16.7) ×10⁵ Pa. The difference between the polarizability in the direction of the molecular dipole and the mean is (?0.029 ± 0.008) × 10^?40 C² m² J^?1. With literature data, this yields all three principal polarizabilities. The first hyperpolarizability β^K is obtained.     

Photodissociation of the dimer ions Ar+2, Ne+2, and (CO2)+2

The tandem quadrupole photodissociation mass spectrometer has been used to study photodissociation reactions of Ar⁺₂, Ne⁺₂, and (CO₂)⁺₂. The cross sections for photodissociation of Ar⁺₂ exhibited a strong dependence on ion source pressure, varying from 2 × 10 ^?18cm² at 0.1 torr to 6 × 10^?19cm² at 0.5 torr. A large photodissociation cross section (2 × 10^?17cm² for the reaction (CO₂)⁺₂ → CO⁺₂+ CO₂ was observed at the red end of the visible spectrum (580–620 nm) suggesting that this may be an important reaction in CO₂ rich planetary ionspheres such as that of Mars.