Transformation of ionic liquid into carbon nanotubes in confined nanospace

We have developed a two-step filling process for the nano-reaction of ionic liquid in a tip-closed SWNT, where fullerenes are inserted at the end of the host SWNT as a plug to prevent the leakage of the confined ionic liquid during heat treatment.     

Spectroelectrochemistry of carbon nanostructures.

This review is focused on charge-transfer reactions at carbon nanotubes and fullerenes. The spectroelectrochemistry of fullerenes deals with the spin states of fullerenes, the role of mono-anions and the reactivity of higher charged states in C60. The optical (Vis-NIR) spectroelectrochemistry of single-walled carbon nanotubes (SWNTs) follows changes in the allowed optical transitions among the Van Hove singularities. The Raman spectroelectrochemistry of SWNT benefits from strong resonance enhancement of the Raman scattering. Here, both semiconducting and metallic SWNTs are analyzed using the radial breathing mode (RBM) and G-modes as well as the second order (D, G') and intermediate frequency modes. Raman spectroelectrochemistry of SWNT allows the addressing of index-identified tubes and even single isolated nanotubes. Optical and Raman spectroelectrochemistry of fullerene peapods, C60@SWNT and C70@SWNT indicates effective shielding of the intratubular fullerene (peas). The most striking effect in the spectroelectrochemistry of peapods is the so-called "anodic Raman enhancement" of intratubular C60. Double-walled carbon nanotubes (DWNTs) give a specific spectroscopic response in Vis-NIR spectroelectrochemistry for the inner and the outer tube. They are better distinguishable by Raman spectroelectrochemistry which allows a precise tracing of the specific doping response of outer/inner tubes.     

Functionalization and extraction of large fullerenes and carbon-coated metal formed during the synthesis of single wall carbon nanotubes by laser oven, direct current arc, and high-pressure carbon monoxide production methods

Large fullerenes and carbon-coated metal nanoparticles that are formed during the synthesis of carbon nanotubes have been functionalized by the addition of alkyl radicals and isolated by extraction into chloroform. The soluble, functionalized fullerenes have been isolated from raw single-wall carbon nanotube (SWNT) material prepared by laser oven, direct current arc, and high-pressure carbon monoxide production methods. Analyses of the extracted large fullerenes were carried out by thermogravimetric analysis, UV-vis-near-IR, laser desorption ionization mass spectrometry, and high-resolution transmission electron microscopy.     

Insight into the Structural Variation and Sodium Storage Behavior of Polyoxometalates Encapsulated within Single-Walled Carbon Nanotubes

The host–guest interaction can remarkably alter the physiochemical properties of composite materials. It is crucial to clarify the mechanism by revealing the influence of the host on the electronic structure of the guest molecules. Herein, we study the structural variation of polyoxometalates (POMs) after being confined in single-walled carbon nanotubes (SWNT). What we found is that in addition to the reported charge transfer from SWNT to POM, an intramolecular electron transfer within a single POM cluster can be observed in the POM@SWNT composites. Moreover, the charge density on the bridged oxygen of POMs is prominently enhanced. The structural change and electron reconfiguration of POMs upon encapsulation in SWNT significantly speed up electron and ion transport, leading to the improved electrochemical performance for sodium ions storage.     

单壁碳纳米管内包合有机小分子(乙炔、乙烯和乙烷)结构的理论研究

采用量子化学密度泛函B3LYP方法计算并对比研究了内包合三种有机小分子(乙炔、乙烯和乙烷)的(5,5)型扶手椅式碳纳米管复合物的结构以及电子性质. 研究结果表明, 中心掺杂物放在碳纳米管的管轴上的异构体比掺杂物垂直于管轴的异构体稳定; 内嵌有机小分子碳纳米管复合物的形成过程为吸热过程; 有机小分子的插入会使其HOMO-LUMO能隙变大; 并引起碳纳米管直径的轻微加大, 以减少碳管张力, 其形变程度增大的顺序依次为C2H2相似文献   

Single-walled carbon nanotubes/polymer composite electrodes patterned directly from solution

This work describes a simple technique for direct patterning of single-walled carbon nanotube (SWNT)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) composite electrodes in a large area on a substrate based on the solution transfer process by microcontact printing using poly(dimethylsiloxane) (PDMS) stamps. Various shapes of SWNT/PEDOT-PSS composite patterns, such as line, circle, and square, can be easily fabricated with high pattern fidelity and structural integrity. The single parallel line pattern device exhibits high electrical conductivity (0.75 × 10(5) S/m) and electronic stability because of alignment of nanotubes and big-size SWNT bundles (～5 nm). The electromechanical study reveals that the composite patterns show ～1% resistance change along SWNT alignment direction and ～5% resistance change along vertical alignment direction after 200 bend cycles. Our approach provides a facile, low-cost method to pattern transparent conductive SWNT/polymer composite electrodes and demonstrates a novel platform for future integration of conducting SWNT/polymer composite patterns for optoelectronic applications.     

Proximity-induced superconductivity in carbon nanotubes

Single wall carbon nanotubes (SWNT) are model systems for the study of electronic transport in one-dimensional conductors. They are expected to exhibit strong electronic correlations and non-Fermi liquid behavior as suggested by recent experiments. The possibility to induce supercurrents through such molecular wires is a challenging question both for experimentalists and theoreticians. In this paper we show experimental evidence of induced superconductivity in a SWNT. This proximity effect is observed in a single 1 nm diameter SWNT, in individual cristalline ropes containing about 100 nanotubes and also on multiwalled tubes. These samples are suspended as strings between two superconducting electrodes (double layer Au-Re, Au-Ta or Sn film) at a distance varying between 100 and 2 000 nm. This allows their structural study in a transmission electron microscope. When their resistance is low enough, SWNT become superconducting with surprisingly high critical currents (in the micro-Ampere range for a single tube of normal state resistance 25 kΩ). This critical current, extensively studied as function of temperature and magnetic field, exhibits unusual features which are not observed in conventional Superconducting-Normal-Superconducting junctions and can be related to the strong 1D character of these samples. We also show evidence of a huge sensitivity of dc transport properties of the tubes to electromagnetic radiation in the radio-frequency range.     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Antimicrobial activity of functionalized single‐walled carbon nanotube with herbal extract of Hempedu bumi

The primary purpose of this study was to determine the antimicrobial activity of functionalized single‐walled carbon nanotube (SWNT) using an extract of the herb, Hempedu bumi. H bumi extract and H bumi extract complexed SWNT were evaluated for biological activities against Bacillus sp., (pathogen) Escherichia coli (opportunistic pathogen), and Aspergillus niger (pathogen). The formation of inhibition zones of these 3 microbes was measured to be evident for the functionalized SWNT with H bumi. Further, morphological and structural analyses were conducted to investigate the functionalized SWNT with H bumi using scanning electron microscopy, atomic force microscopy, X‐ray photoelectron spectroscopy, X‐ray powder diffraction, and Fourier transform infrared spectroscopy, well supporting the intact and crystalline nature of the SWNT. Fourier transform infrared spectroscopy result shows the highest peak at 3371.48 cm⁻¹, representing an andrographolide group from the plant extract. An apparent clear zone has been noticed with SWNT conjugated H bumi extract, displaying a zone of inhibition larger than 1.0 cm against the tested microbes. The results indicate that SWNT has the potential for use as a carrier of components from plant extracts.     

Mechanical Properties and Morphology of Melt-mixed PA6/SWNT Composites: Effect of Reactive Coupling

An interfacial reaction during melt mixing of maleic anhydride copolymer (SMA) encapsulated single wall carbon nanotubes (SWNT) and polyamide 6 (PA6) was used in order to disperse SWNT homogeneously and to enhance interfacial adhesion. The intended reactive coupling between PA6 and SMA was evident from IR spectroscopy. Nanocomposites with SMA encapsulated SWNT showed increased elongation at break as compared to PA6/SWNT composites. SEM investigation of tensile fractured surfaces of PA6/SWNT+SMA composites indicated enhanced interfacial adhesion between PA6 and SMA modified SWNT.     

Single wall carbon nanotube amplification: en route to a type-specific growth mechanism

With the desire to mass produce any specific n,m type of single wall carbon nanotube (SWNT) from a small sample of the same material, we disclose here the preliminary work directed toward that goal. The ultimate protocol would involve taking a single n,m-type nanotube sample, cutting the nanotubes in that sample into many short nanotubes, using each of those short nanotubes as a template for growing much longer nanotubes of the same type, and then repeating the process. The result would be an amplification of the original tube type: a parent SWNT serving as the prolific progenitor of future identical SWNT types. As a proof-of-concept, we use here a short SWNT seed as a template for vapor liquid solid (VLS) amplification growth of an individual long SWNT. The original short SWNT seed was a polymer-wrapped SWNT, end-carboxylated, and further tethered with Fe salts at its ends. The Fe salts were to act as the growth catalysts upon subsequent reductive activation. Deposition of the short SWNT-Fe tipped species upon an oxide surface was followed by heating in air to consume the polymer wrappers, then reducing the Fe salts to Fe(0) under a H2-rich atmosphere. During this heating, the Fe(0) can etch back into the short SWNT so that the short SWNT acts as a template for new growth to a long SWNT that occurs upon introduction of C2H4 as a carbon source. Analysis indicated that the templated VLS-grown long SWNT had the same diameter and surface orientation as the original short SWNT seed, although amplifying the original n,m type remains to be proven. This study could pave the way for an amplified growth process of SWNTs en route to any n,m tube type synthesis from a starting sample of pure nanotubes.     

Dielectrophoresis of surface conductance modulated single-walled carbon nanotubes using catanionic surfactants

Dielectrophoresis has received considerable attention for separating nanotubes according to electronic types. Here we examine the effects of surface conductivity of semiconducting single walled carbon nanotubes (SWNT), induced by ionic surfactants, on the sign of dielectrophoretic force. The crossover frequency of semiconducting SWNT increases rapidly as the conductivity ratio between the particle and medium increases, leading to an incomplete separation of ionic surfactant suspended SWNT at an electric field frequency of 10 MHz. To reduce the conductivity ratio, the surface charge of SWNT is neutralized by an equimolar mixture of anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant cetyltrimethylammonium bromide (CTAB), resulting in negative dielectrophoresis of semiconducting species at 10 MHz. A comparative Raman spectroscopy study shows a nearly complete separation of metallic SWNT.     

Chemical Adsorption onto an ITO Substrate of Single‐Wall Carbon Nanotube Functionalized by Carboxylic Groups as an Efficient Support for Electrocatalyst

A single‐wall carbon nanotube functionalized by carboxylic groups (SWNT‐CA) was found to be adsorbed on an indium tin oxide (ITO) electrode by chemical interaction between carboxylic groups and the ITO surface. The adsorption experiments indicated that the narrow pH conditions (around pH 3.0) exist for its adsorption which is restricted by preparation of stable fluid dispersion (favorable at higher pH) and by the chemical interaction (favorable at lower pH). Atomic force microscopic (AFM) measurements suggest that fragmented SWNT‐CA are adsorbed, primarily lying on the surface. Electrochemical impedance analysis indicated that an electrochemical double layer capacitance of the SWNT‐CA/ITO electrode is considerably higher than that for the ITO electrode, suggesting that the interfacial area between the electrode surface and the electrolyte solution is enlarged by the SWNT‐CA layer. Pt particles were deposited as a catalyst on the bare ITO and SWNT‐CA‐coated ITO (SWNT‐CA/ITO) electrodes to give respective Pt‐modified electrodes (denoted as a Pt/ITO electrode and a Pt/SWNT‐CA/ITO electrode, respectively). The cathodic current for the Pt/SWNT‐CA/ITO electrode was 1.7 times higher than that for the Pt/ITO electrode at 0.0 V, showing that the Pt/SWNT‐CA/ITO electrode works more efficiently for O₂ reduction at 0.0 V due to the SWNT‐CA layer. The enhancement by the SWNT‐CA layer is also effective for electrocatalytic proton reduction. It could be ascribable to the enlarged interfacial area between the electrode surface and the electrolyte solution.     

Thermal annealing of SiC nanoparticles induces SWNT nucleation: evidence for a catalyst-independent VSS mechanism

Density-functional tight-binding molecular dynamics (DFTB/MD) methods were employed to demonstrate single-walled carbon nanotube (SWNT) nucleation resulting from thermal annealing of SiC nanoparticles. SWNT nucleation in this case is preceded by a change of the SiC structure from a crystalline one, to one in which silicon and carbon are segregated. This structural transformation ultimately resulted in the formation of extended polyyne chains on the SiC nanoparticle surface. These polyyne chains subsequently coalesced, forming an extended sp(2)-hybridized carbon cap on the SiC nanoparticle. The kinetics of this process were enhanced significantly at higher temperatures (2500 K), compared to lower temperatures (1200 K) and so directly correlated to the surface premelting behavior of the nanoparticle structure. Analysis of the SiC nanoparticle Lindemann index between 1000 and 3000 K indicated that SWNT nucleation at temperatures below 2600 K occurred in the solid, or quasi-solid, phase. Thus, the traditional vapor-liquid-solid mechanism of SWNT growth does not apply in the case of SiC nanoparticles. Instead, we propose that this example of SWNT nucleation constitutes evidence of a vapor-solid-solid process. This conclusion complements our recent observations regarding SWNT nucleation on SiO(2) nanoparticles (A. J. Page, K. R. S. Chandrakumar, S. Irle and K. Morokuma, J. Am. Chem. Soc., 2011, 133, 621-628). In addition, similarities between the atomistic SWNT nucleation mechanisms on SiC and SiO(2) catalysts provide the first evidence of a catalyst-independent SWNT nucleation mechanism with respect to 'non-traditional' SWNT catalyst species.     

In-depth study into the interaction of single walled carbon nanotubes with anthracene and p-terphenyl

Solubilization of single walled carbon nanotubes (SWNT) in the presence of polycyclic aromatic hydrocarbons (PAHs) such as p-terphenyl and anthracene has been shown. The suspensions formed are stable for periods greater than 48 months but to date experimental research is scarce regarding the interactions that are taking place. Spectroscopic analysis such as Raman and fluorescence are used to probe the interactions occurring between the PAHs and the SWNT over a wide concentration range. Previous studies show the fluorescence of the PAHs is quenched on interaction with SWNT and in the case of p-terphenyl, the spectrum is red shifted. This result prompted a study of a large range of concentrations to quantify the degree of interaction between the SWNT and PAHs. It was found at high concentrations that both the PAHs and SWNT formed aggregates and at lower concentrations it was found that free PAHs and isolated SWNT were interacting. The radial breathing modes (RBMs) in Raman spectroscopy gave detail as to how diameter selective the PAH samples are when compared to the pristine SWNT modes. An increase in the wavenumber of the RBMs for both composite spectra was observed and it is believed that such a result is due to the debundling of the SWNT on interaction with the PAHs. It was also found that anthracene and p-terphenyl selectively interact with SWNT and the selected SWNT were found to be within a distinct diameter range and possessed unique physical properties.     

Structural transformation of fluorinated carbon nanotubes induced by in situ electron-beam irradiation

We have investigated the structural transformation of fluorinated singlewalled nanotubes (SWNTs) induced by electron-beam irradiation during the transmission electron microscope observations. Heavily fluorinated SWNT bundles were systematically transformed into multiwall-like nanotubes by releasing fluorine atoms during electron-beam irradiation and even broken into two pieces of the capped graphitic structures. Such structural transformations at relatively low kinetic energy (< or = 300 keV) could be explained by the local strains induced by fluorination, where C-C bonds that were fluorine-attached became 1.53 A, a single bond similar to that of a diamond, from our density functional calculations. We propose a possible concerted pathway for the structural transformation of fluorinated SWNTs induced by electron-beam irradiation based on the experimental observations.     

Spectroscopic characterization of P3HT/SWNT composites synthesized using in situ GRIM methods: Improved polymer ordering via nanoscaffolding

Poly(3‐hexylthiophene)/single‐walled carbon nanotube (P3HT/SWNT) materials are synthesized using an in‐situ Grignard metathesis approach. The structural properties and photophysics of the materials are studied using a multitude of techniques, including ¹H NMR, FTIR, UV–vis absorption, Raman, photoluminescence (PL), and transient absorption spectroscopies. P3HT/SWNT composites with high P3HT regioregularity (rr > 96%) are observed. Raman spectroscopic data on the solid samples reveals an increase in the dispersion rate parameter with increasing SWNT concentration, thereby indicating close overlap and strong interactions between P3HT and the carbon nanotubes. Changes in the solution‐phase PL quantum yields and excited‐state lifetimes relative to pure P3HT support these conclusions, and indicate that strong interactions persist even after the composites are dispersed in organic solvents. The high regioregularity and enhanced P3HT–SWNT interactions are promising attributes for improving the morphology and efficiency of functional P3HT/SWNT materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 310–320     

84% catalyst activity of water-assisted growth of single walled carbon nanotube forest characterization by a statistical and macroscopic approach

We propose a statistical and macroscopic analysis to estimate the catalyst activity of water-assisted growth (super-growth) of single-walled nanotubes (SWNT) and to characterize SWNT forests. The catalyst activity was estimated to be 84% (+/-6%), the highest ever reported. The SWNT forest was found to be a very sparse material where SWNTs represent only 3.6% of the total volume. This structural sparseness is believed to play a critical role in achieving highly efficient growth.     

Protein-sheathed SWNT as a versatile scaffold for nanoparticle assembly and superstructured nanowires

One dimensional (1D) nanostructures have many possible applications in electronic, optical, and sensing devices associated with their nanosized lateral dimensions. In this regard, a general and bottom-up strategy to synthesize 1D nanoparticle arrays and conductive nanowires with a facile structural/compositional control is highly desired. We herein report a protein-sheathed single walled carbon nanotube (SWNT) that satisfies the criteria for an ideal template to assemble micron-long gold nanoparticle (AuNP) linear arrays with high structural rigidity. The resulting AuNP array has minimized inter-particle gaps, which is especially useful to template the overgrowth of Ag, Pd, and Pd/Ag metals into continuous nanowires (Au@M, M=Ag, Pd, Ag/ Pd). Our method successfully overcomes the incompatibility between carbon and metal materials, and the resulting superstructured metal nanowires have a tunable diameter below 100 nm and a shape closely replicating a SWNT. The Ag nanowires are composed of coalesced Au@Ag coreshell nanoparticles, while the Pd and Pd/Ag nanowires are made of very fine Pd nanocrystallites around the AuNP cores. These unique structural features are pivotal to various applications including surface enhanced Raman scattering (SERS), electrocatalysis, and gas sensors.     

Thermal physics in carbon nanotube growth kinetics

The growth of single wall carbon nanotubes (SWNTs) mediated by metal nanoparticles is considered within (i) the surface diffusion growth kinetics model coupled with (ii) a thermal model taking into account heat release of carbon adsorption-desorption on nanotube surface and carbon incorporation into the nanotube wall and (iii) carbon nanotube-inert gas collisional heat exchange. Numerical simulations performed together with analytical estimates reveal various temperature regimes occurring during SWNT growth. During the initial stage, which is characterized by SWNT lengths that are shorter than the surface diffusion length of carbon atoms adsorbed on the SWNT wall, the SWNT temperature remains constant and is significantly higher than that of the ambient gas. After this stage the SWNT temperature decreases towards that of gas and becomes nonuniformly distributed over the length of the SWNT. The rate of SWNT cooling depends on the SWNT-gas collisional energy transfer that, from molecular dynamics simulations, is seen to be efficient only in the SWNT radial direction. The decreasing SWNT temperature may lead to solidification of the catalytic metal nanoparticle terminating SWNT growth or triggering nucleation of a new carbon layer and growth of multiwall carbon nanotubes.