One-step purification of histone deacetylase from Escherichia coli cell-lysate by counter-current chromatography using aqueous two-phase system

Aqueous-aqueous two-phase (AATP) systems composed of polyethylene glycol (PEG) (molecular mass, M(r):1000-8000) and dextran (M(r):40,000) were evaluated for purification of maltose binding protein tagged-histone deacetylase (MBP-HDAC) by counter-current chromatography (CCC). CCC purification of an MBP-HDAC from Escherichia coli cell-lysate was successfully demonstrated with a 7.0% PEG 3350-10% dextran T40 system containing 10 mM potassium phosphate buffer at pH 9.0. After CCC purification, both polymers in the CCC fractions were easily removed by ultrafiltration in a short period of time. The collected fractions containing target protein were analyzed by an HPLC-based in vitro assay as well as sodium dodecyl sulfate polyacrylamide gel electrophoresis. MBP tag was digested from fusion HDAC during the CCC separation and native HDAC was purified by one-step operation with well preserved deacetyl enzyme activity.     

Adsorptive detagging of poly-histidine tagged protein using hexa-histidine tagged exopeptidase

The ubiquitous use of poly-histidine fusion tags has made the purification of the recombinant target proteins much simpler, although the presence of residual fusion tags can generate immunogenic products or products with changed biological activities. This work presents a generic method of removing poly-histidine fusion tags from recombinant proteins through the use of a hexa-histidine tagged exopeptidase (DAPase) when both tagged species are adsorbed to the immobilized metal affinity chromatography (IMAC) adsorbent. Adsorptive detagging was performed in the presence of 50mM imidazole in order to allow the cleavage reaction by the hexa-histidine tagged DAPase to occur. The progress of batch and adsorptive detagging by DAPase of maltose binding protein (MBP) tagged with two variants of hexa-histidine fusion tag was successfully monitored using cationic exchange chromatography. A single-step, column-based detagging strategy was then optimized to maximize the recovery of native MBP. The kinetics of batch and on-column digestion for both HT6 and HT15 fusion tags were investigated. The process involved the sequential removal of dipeptides during the digestion of full-length fusion protein down to its fully detagged native form. During the course of tag digestion, 4 and 7 different intermediates were detected for HT6 and HT15 tagged MBP respectively. The characteristics of on-column cleavage of poly-histidine fusion tags by DAPase as a function of incubation temperature and amount of protease activity used were examined. It was found that the influence of fusion tag design on the batch and column-based detagging yield and efficiency was substantial. In addition, the structural difference of fusion tags affects the binding strength of the fusion protein, which can influence the resulting product purity. Despite being a longer tag, HT15 fusion tag was the preferred sequence for shortening the time needed for on-column detagging. These results can be applied to the wider use of the proposed platform protocol for the on-column cleavage of poly-histidine tagged proteins using exopeptidases.     

Cu/Zn Incorporation During Purification of Soluble Human EC-SOD from E. coli Stabilizes Proper Disulfide Bond Formation

Extracellular superoxide dismutase (EC-SOD) is the only enzyme that removes superoxide radical in the extracellular space. The reduction of EC-SOD is linked to many diseases, suggesting that the protein may have therapeutic value. EC-SOD is reported to be insoluble and to make inclusion bodies when overexpressed in the cytoplasm of Escherichia coli. The refolding process has the advantage of high yield, but has the disadvantage of frequent aggregation or misfolding during purification. For the first time, this study shows that fusion with maltose-binding protein (MBP), N-utilization substance protein A, and protein disulfide isomerase enabled the soluble overexpression of EC-SOD in the cytoplasm of E. coli. MBP-tagged human EC-SOD (hEC-SOD) was purified by MBP affinity and anion exchange chromatography, and its identity was confirmed by MALDI-TOF MS analysis. The purified protein showed good enzyme activity in vitro; however, there was a difference in metal binding. When copper and zinc were incorporated into hEC-SOD before MBP tag cleavage, the enzymatic activity was higher than when the metal ions were bound to the purified protein after MBP tag cleavage. Therefore, the enzymatic activity of hEC-SOD is associated with metal incorporation and protein folding via disulfide bond.     

A genetic approach for controlling the binding and orientation of proteins on nanoparticles

Although silver nanoparticles are excellent surface enhancers for Raman spectroscopy, their use to probe the conformation of large proteins at interfaces has been complicated by the fact that many polypeptides adsorb weakly or with a random orientation to colloidal silver. To address these limitations, we sought to increase binding affinity and control protein orientation by fusing a silver-binding dodecapeptide termed Ag4 to the C-terminus of maltose-binding protein (MBP), a well-characterized model protein with little intrinsic silver binding affinity. Quartz crystal microbalance measurements conducted with the MBP-Ag4 fusion protein revealed that its affinity for silver (Kd approximately 180 nM) was at least 1 order of magnitude higher than a control protein, MBP2, containing a non-silver-specific C-terminal extension. Under our experimental conditions, MBP-Ag4 SERS spectra exhibited 2-4 fold higher signal-to-background relative to MPB2 and contained a number of amino acid-assigned vibrational modes that were either weak or absent in control experiments performed with MBP2. Changes in amino acid-assigned peaks before and after MBP-Ag4 bound maltose were used to assess protein orientation on the surface of silver nanoparticles. The genetic route described here may prove useful to study the orientation of other proteins on a variety of SERS-active surfaces, to improve biosensors performance, and to control functional nanobiomaterials assembly.     

Reversible modulation of quantum dot photoluminescence using a protein- bound photochromic fluorescence resonance energy transfer acceptor

Multiple copies ( approximately 20) of Escherichia coli maltose binding protein (MBP) were coordinated to luminescent semiconductor quantum dots (QDs) via a C-terminal oligohistidine segment. The MBP was labeled with a sulfo-N-hydroxysuccinimide-activated photochromic BIPS molecule (1',3-dihydro-1'-(2-carboxyethyl)-3,3-dimethyl-6-nitrospiro[2H-1-benzopyran-2,2'-(2H)-indoline]) at two different dye-to-MBP ratios; D/P = 1 and 5. The ability of MBP-BIPS to modulate QD photoluminescence was tested by switching BIPS from the colorless spiropyran (SP) to the colored merocyanine (MC) using white light (>500 nm) or UV light ( approximately 365 nm), respectively. QDs surrounded by MBP-BIPS with D/P = 1 were quenched on average approximately 25% with consecutive repeated switches, while QDs surrounded by MBP-BIPS with D/P = 5 were quenched approximately 60%. This result suggests a possible use of BIPS-labeled proteins in QD-based nanostructures as part of a threshold switch or other biosensing device.     

Two-dimensional electrophoretic analysis of rice proteins by polyethylene glycol fractionation for protein arrays

Two-dimensional electrophoresis (2-DE) is known as the most effective as well as one of the simplest methods for separating proteins. However, a few hundred plant leaf proteins out of thousands visualized on a 2-DE gel can be identified by chemical analysis due to the presence of ribulose bisphosphate carboxylase/oxygenase (Rubisco) that limits protein loading. We describe the extraction and fractionation technique with polyethylene glycol (PEG) to analyze rice leaf proteins. Rice proteins were extracted with Mg/NP-40 extraction buffer. The Mg/Nonidet P-40 (NP-40) buffer extract was further fractionated with PEG into three fractions: 10% PEG and 10-20% PEG precipitants and the final supernatant fraction that was precipitated with acetone. Rubisco, the most abundant rice leaf protein, was enriched in the 20% PEG precipitant. This fractionation technique analyzed at least 2,600 well-separated protein spots and exhibited less than 1.2% of noticeable overlapping spots. An immunological approach was used to verify the efficiency whether PEG fractionation technique can detect or enrich signal transduction components such as Galpha, ADP ribosylation factor, small GTP binding protein and 14-3-3. The ADP ribosylation factor (ARF) and Galpha were only detected in the PEG supernatant fraction not in the total protein fraction. The small GTP binding protein (Rab 7) was identified in the 10% PEG fraction and only faintly in the total protein fraction. The 14-3-3 protein was detected in all fractions but was especially prevalent in the 20% PEG fraction.     

GlycoTAIL and FlexiTAIL as Half-Life Extension Modules for Recombinant Antibody Fragments

Many therapeutic proteins are small in size and are rapidly cleared from circulation. Consequently, half-life extension strategies have emerged to improve pharmacokinetic properties, including fusion or binding to long-lasting serum proteins, chemical modifications with hydrophilic polymers such as PEGylation, or, more recently, fusion to PEG mimetic polypeptides. In the present study, two different PEG mimetic approaches, the GlycoTAIL and the FlexiTAIL, were applied to increase the hydrodynamic radius of antibody fragments of different sizes and valencies, including scFv, diabody, and scFv-EHD2 fusion proteins. The GlycoTAIL and FlexiTAIL sequences of varying lengths are composed of aliphatic and hydrophilic residues, with the GlycoTAIL furthermore comprising N-glycosylation sites. All modified proteins could be produced in a mammalian expression system without reducing stability and antigen binding, and all modified proteins exhibited a prolonged half-life and increased drug disposition in mice. The strongest effects were observed for proteins comprising a FlexiTAIL of 248 residues. Thus, the GlycoTAIL and FlexiTAIL sequences represent a flexible and modular system to improve the pharmacokinetic properties of proteins.     

A modular nanoparticle-based system for reagentless small molecule biosensing

Metalloprotein tethered CdSe nanoparticles have been generated to provide selective and reagentless maltose biosensing. As opposed to cell or protein detection by semiconducting nanoparticle bioconjugates, a modular method for small-molecule detection using semiconducting nanoparticle bioconjugates has been difficult. Here we report a method for reagentless protein-based semiconducting nanoparticle biosensors. This method uses Ru(II) complex-CdSe nanoparticle interactions and the maltose-induced conformation changes of maltose binding protein to alter the CdSe nanoparticle fluorescence emission intensity. In this proof-of-principle system, the maltose-induced protein conformation changes alter the Ru(II) complex-CdSe nanoparticle interaction, which increases the CdSe emission intensity. Altered CdSe emission intensity effects are best described as electron transfer from the Ru(II) complex to the CdSe excited state forming the nonfluorescent CdSe anion. Four surface-cysteine, Ru(II) complex-attached maltose-binding proteins have been studied for maltose dependent alteration of CdSe emission intensities. With 3.0-3.5 nm diameter CdSe nanoparticles, all ruthenated maltose-binding proteins display similar maltose-dependent increases (1.4-fold) in CdSe emission intensity and maltose binding affinities (KA = 3 x 106 M-1). For these four systems, the only difference was the sample-to-sample variation in maltose-dependent responses. Thus, very few surface cysteine mutations need to be examined to find a successful biosensor, as opposed to analogous systems using organic fluorophores. This strategy generates a unimolecular, or reagentless, semiconducting nanoparticle biosensor for maltose, which could be applied to other proteins with ligand-dependent conformation changes.     

Verification of biochemical activity for proteins nanografted on gold surfaces

We demonstrate that the Atomic Force Microscope (AFM) can be used to immobilize a dicysteine-terminated protein (Maltose Binding Protein, MBP-cys-cys for short) at well-defined locations directly on gold substrates via nanografting and characterize the in situ bioactivity of these proteins within the fabricated nanopatterns. This method exploits the high spatial and orientational control of the protein monolayer assembly allowed by nanografting, combined with the high sensitivity of the AFM for detecting ligand-binding events. The maltose-mediated conformational changes within the MBP have been found to change the AFM-tip-protein interaction, therefore causing the frictional signal to change. Our measurements show that the protein ligand-binding function is maintained upon the immobilization process and is not affected by (a) the addition of the cysteine dipeptide, (b) the spatial confinement associated with nanografting, and (c) the interaction between the protein and the Au substrate. These surface-confined proteins can also be regenerated, and their frictional response is reproducible through several maltose exposure/washing cycles. By measuring the change in the frictional force above the protein nanopatterns as a function of maltose concentration, we determined the dissociation constant for the MBP-cys-cys/maltose system to be kd = (1 +/- 0.04) microM. Our results show that the MBP-cys-cys system provides a very sensitive surface-based, protein nanobiosensor for maltose detection at the attogram level (approximately 100 nM concentration). The implications of our study for the fabrication of molecular-scale biological sensors are discussed at the end of the paper.     

A novel self-cleaving phasin tag for purification of recombinant proteins based on hydrophobic polyhydroxyalkanoate nanoparticles

A novel protein purification method was developed using microbial polyhydroxyalkanoates (PHA) granule-associated protein phasin, a pH-inducible self-cleaving intein and PHA nanoparticles. Genes for the target proteins to be produced and purified were fused to genes of intein and phasin, the genes were jointly over-expressed in vivo, such as in E. coli cells in this study. The fused proteins containing target protein, intein and phasin produced by the recombinant E. coli were released together with all other E. coli proteins via a bacterial lysis process. They were then adsorbed in vitro to the surfaces of the hydrophobic polymer nanoparticles incubated with the cell lysates. The nanoparticles attached with the fused proteins were concentrated via centrifugation. Then, the reasonably purified target protein was released by self-cleavage of intein and separated with nanoparticles by a simple centrifugation process. Using this system, enhanced green fluorescent protein (EGFP), maltose binding protein (MBP) and beta-galactosidase were successfully purified in their active forms with reasonable yields, respectively, demonstrating the effectiveness and reliability of this purification system. This method allows the production and purification of high value added proteins in a continuous way with low cost.     

Extraction of endoglucanase I (Ce17B) fusion proteins from Trichoderma reesei culture filtrate in a poly(ethylene glycol)-phosphate aqueous two-phase system

Endoglucanases (EGI) (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Ce17B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP)2, (WP)4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP)4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K=1.2) in comparison to full-length EGI (K=0.035). Partitioning of the construct with (WP)4 fused to the catalytic module and a short sequence of the linker [EGI(core-P5)(WP)4] resulted in the highest partition coefficient (K=54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP)4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.     

Ordered nano-structure of a stamped self-organized protein layer on a HOPG surface using a HFB carrier

A groundbreaking method for ordered molecular layer preparation on a solid surface employing the drop-stamp method has been developed by us taking advantage of the characteristics of the HFB molecule as a self-organizer/adsorption carrier. It is a smart method which can be used to prepare a self-organized protein layer on a solid surface without unspecific adsorption or defects. In our previous report, we clarified the self-organizing nature of HFB-tagged protein molecules on a surface of a solution droplet. In this report, a protein layer was prepared on a HOPG surface by using the drop-stamp method with a maltose binding protein (MBP)-tagged HFBII molecule. The structure of the stamped protein layer was investigated using frequency modulation atomic force microscopy (FM-AFM) in a liquid condition. The FM-AFM images show that the drop-stamp method can prepare an ordered protein layer on a solid surface smartly. The drop-stamp method using a HFB carrier is a practical method which can be used to prepare an ordered protein layer on a solid substrate surface without unspecific adsorption defects.     

Aqueous two-phase systems for protein separation: a perspective

Aqueous two-phase systems (ATPS) that are formed by mixing a polymer (usually polyethylene glycol, PEG) and a salt (e.g. phosphate, sulphate or citrate) or two polymers and water can be effectively used for the separation and purification of proteins. The partitioning between both phases is dependent on the surface properties of the proteins and on the properties of the two phase system. The mechanism of partitioning is complex and not very easy to predict but, as this review paper shows, some very clear trends can be established. Hydrophobicity is the main determinant in the partitioning of proteins and can be measured in many different ways. The two methods that are more attractive, depending on the ATPS used (PEG/salt, PEG/polymer), are those that consider the 3-D structure and the hydrophobicity of AA on the surface and the one based on precipitation with ammonium sulphate (parameter 1/m*). The effect of charge has a relatively small effect on the partitioning of proteins in PEG/salt systems but is more important in PEG/dextran systems. Protein concentration has an important effect on the partitioning of proteins in ATPS. This depends on the higher levels of solubility of the protein in each of the phases and hence the partitioning observed at low protein concentrations can be very different to that observed at high concentrations. In virtually all cases the partition coefficient is constant at low protein concentration (true partitioning) and changes to a different constant value at a high overall protein concentration. Furthermore, true partitioning behavior, which is independent of the protein concentration, only occurs at relatively low protein concentration. As the concentration of a protein exceeds relatively low values, precipitation at the interface and in suspension can be observed. This protein precipitate is in equilibrium with the protein solubilized in each of the phases. Regarding the effect of protein molecular weight, no clear trend of the effect on partitioning has been found, apart from PEG/dextran systems where proteins with higher molecular weights partitioned more readily to the bottom phase. Bioaffinity has been shown in many cases to have an important effect on the partitioning of proteins. The practical application of ATPS has been demonstrated in many cases including a number of industrial applications with excellent levels of purity and yield. This separation and purification has also been successfully used for the separation of virus and virus-like particles.     

Dual affinity method for plasmid DNA purification in aqueous two-phase systems

The DNA binding fusion protein, LacI–His₆–GFP, together with the conjugate PEG–IDA–Cu(II) (10 kDa) was evaluated as a dual affinity system for the pUC19 plasmid extraction from an alkaline bacterial cell lysate in poly(ethylene glycol) (PEG)/dextran (DEX) aqueous two-phase systems (ATPS). In a PEG 600–DEX 40 ATPS containing 0.273 nmol of LacI fusion protein and 0.14% (w/w) of the functionalised PEG–IDA–Cu(II), more than 72% of the plasmid DNA partitioned to the PEG phase, without RNA or genomic DNA contamination as evaluated by agarose gel electrophoresis. In a second extraction stage, the elution of pDNA from the LacI binding complex proved difficult using either dextran or phosphate buffer as second phase, though more than 75% of the overall protein was removed in both systems. A maximum recovery of approximately 27% of the pCU19 plasmid was achieved using the PEG–dextran system as a second extraction system, with 80–90% of pDNA partitioning to the bottom phase. This represents about 7.4 μg of pDNA extracted per 1 mL of pUC19 desalted lysate.     

Affinity partitioning of plasmid DNA with a zinc finger protein

The affinity isolation of pre-purified plasmid DNA (pDNA) from model buffer solutions using native and poly(ethylene glycol) (PEG) derivatized zinc finger-GST (Glutathione-S-Transferase) fusion protein was examined in PEG-dextran (DEX) aqueous two-phase systems (ATPSs). In the absence of pDNA, partitioning of unbound PEGylated fusion protein into the PEG-rich phase was confirmed with 97.5% of the PEGylated fusion protein being detected in the PEG phase of a PEG 600-DEX 40 ATPS. This represents a 1322-fold increase in the protein partition coefficient in comparison to the non-PEGylated protein (Kc = 0.013). In the presence of pDNA containing a specific oligonucleotide recognition sequence, the zinc finger moiety of the PEGylated fusion protein bound to the plasmid and steered the complex to the PEG-rich phase. An increase in the proportion of pDNA that partitioned to the PEG-rich phase was observed as the concentration of PEGylated fusion protein was increased. Partitioning of the bound complex occurred to such an extent that no DNA was detected by the picogreen assay in the dextran phase. It was also possible to partition pDNA using a non-PEGylated (native) zinc finger-GST fusion protein in a PEG 1000-DEX 500 ATPS. In this case the native ligand accumulated mainly in the PEG phase. These results indicate good prospects for the design of new plasmid DNA purification methods using fusion proteins as affinity ligands.     

A Structural Basis for 129Xe Hyper-CEST Signal in TEM-1 β-Lactamase

Genetically encoded (GE) contrast agents detectable by magnetic resonance imaging (MRI) enable non-invasive visualization of gene expression and cell proliferation at virtually unlimited penetration depths. Using hyperpolarized ¹²⁹Xe in combination with chemical exchange saturation transfer, an MR contrast approach known as hyper-CEST, enables ultrasensitive protein detection and biomolecular imaging. GE MRI contrast agents developed to date include nanoscale proteinaceous gas vesicles as well as the monomeric bacterial proteins TEM-1 β-lactamase (bla) and maltose binding protein (MBP). To improve understanding of hyper-CEST NMR with proteins, structural and computational studies were performed to further characterize the Xe-bla interaction. X-ray crystallography validated the location of a high-occupancy Xe binding site predicted by MD simulations, and mutagenesis experiments confirmed this Xe site as the origin of the observed CEST contrast. Structural studies and MD simulations with representative bla mutants offered additional insight regarding the relationship between local protein structure and CEST contrast.     

Anchoring of histidine-tagged proteins to molecular printboards: self-assembly, thermodynamic modeling, and patterning

In this paper the multivalent binding of hexahistidine (His6)-tagged proteins to beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) by using the nickel(II) complex of a hetero-divalent orthogonal adamantyl nitrilotriacetate linker (4) is described. Nonspecific interactions were suppressed by using monovalent adamantyl-hexa(ethylene glycol) derivative 3. With the mono-His6-tagged maltose binding protein (His6-MBP), thermodynamic modeling based on surface plasmon resonance (SPR) titration data showed that the MBP molecules in solution were linked, on average, to Ni.4 in 1:1 stoichiometry. On the surface, however, the majority of His(6)-MBP was complexed to surface-immobilized beta-CDs through three Ni.4 complexes. This difference is explained by the high effective beta-CD concentration at the surface and is a new example of supramolecular interfacial expression. In a similar adsorption scheme, SPR proved that the alpha-proteasome could be attached to beta-CD SAMs in a specific manner. Patterning through microcontact printing of (His6)4-DsRed-fluorescent timer (DsRed-FT), which is a tetrameric, visible autofluorescent protein, was carried out in the presence of Ni.4 Fluorescence measurements showed that the (His6)4-DsRed-FT is bound strongly through Ni.4 to the molecular printboard.     

A new plasmid display technology for the in vitro selection of functional phenotype-genotype linked proteins

BACKGROUND: Display technologies which allow peptides or proteins to be physically associated with the encoding DNA are central to procedures which involve screening of protein libraries in vitro for new or altered function. Here we describe a new system designed specifically for the display of libraries of diverse, functional proteins which utilises the DNA binding protein nuclear factor kappa B (NF-kappa B) p50 to establish a phenotype-genotype link between the displayed protein and the encoding gene. RESULTS: A range of model fusion proteins to either the amino- or carboxy-terminus of NF-kappa B p50 have been constructed and shown to retain the picomolar affinity and DNA specificity of wild-type NF-kappa B p50. Through use of an optimal combination of binding buffer and DNA target sequence, the half-life of p50-DNA complexes could be increased to over 47 h, enabling the competitive selection of a variety of protein-plasmid complexes with enrichment factors of up to 6000-fold per round. The p50-based plasmid display system was used to enrich a maltose binding protein complex to homogeneity in only three rounds from a binary mixture with a starting ratio of 1:10(8) and to enrich to near homogeneity a single functional protein from a phenotype-genotype linked Escherichia coli genomic library using in vitro functional selections. CONCLUSIONS: A new display technology is described which addresses the challenge of functional protein display. The results demonstrate that plasmid display is sufficiently sensitive to select a functional protein from large libraries and that it therefore represents a useful addition to the repertoire of display technologies.     

Surface-immobilized self-assembled protein-based quantum dot nanoassemblies

Luminescent semiconductor quantum dot (QD)-based optical biosensors have the potential to overcome many of the limitations associated with using conventional organic dyes for biodetection. We have previously demonstrated a hybrid QD-protein-based fluorescence resonance energy transfer (FRET) sensor. Although the QD acted as an energy donor and a protein scaffold in the sensor, recognition and specificity were derived from the proteins. Transitioning this hybrid prototype sensor into flow cells and integrated devices will require a surface-immobilization strategy that allows the QD-based sensor to sample the environment and still maintain a distinct protein-covered QD architecture. We demonstrate a self-assembled strategy designed to accomplish this. Using glass slides coated with a monolayer of neutravidin (NA) as the template, QDs with maltose binding protein (MBP) and avidin coordinated to their surface were attached to the glass slides in discrete patterns using an intermediary bridge of biotinylated MBP or antibody linkers. Control of the surface location and concentration of the QD-protein-based structures is demonstrated. The utility of this self-assembly strategy is further demonstrated by assembling a QD-protein structure that allows the QDs to engage in FRET with a dye located on the surface-covering protein.     

Affinity partitioning of human antibodies in aqueous two-phase systems

The partitioning of human immunoglobulin (IgG) in a polymer-polymer and polymer-salt aqueous two-phase system (ATPS) in the presence of several functionalised polyethylene glycols (PEGs) was studied. As a first approach, the partition studies were performed with pure IgG using systems in which the target protein remained in the bottom phase when the non-functionalised systems were tested. The effect of increasing functionalised PEG concentration and the type of ligand were studied. Afterwards, selectivity studies were performed with the most successful ligands first by using systems containing pure proteins and an artificial mixture of proteins and, subsequently, with systems containing a Chinese hamster ovary (CHO) cells supernatant. The PEG/phosphate ATPS was not suitable for the affinity partitioning of IgG. In the PEG/dextran ATPS, the diglutaric acid functionalised PEGs (PEG-COOH) displayed great affinity to IgG, and all IgG could be recovered in the top phase when 20% (w/w) of PEG 150-COOH and 40% (w/w) PEG 3350-COOH were used. The selectivity of these functionalised PEGs was evaluated using an artificial mixture of proteins, and PEG 3350-COOH did not show affinity to IgG in the presence of typical serum proteins such as human serum albumin and myoglobin, while in systems with PEG 150-COOH, IgG could be recovered with a yield of 91%. The best purification of IgG from the CHO cells supernatant was then achieved in a PEG/dextran ATPS in the presence of PEG 150-COOH with a recovery yield of 93%, a purification factor of 1.9 and a selectivity to IgG of 11. When this functionalised PEG was added to the ATPS, a 60-fold increase in selectivity was observed when compared to the non-functionalised systems.