Asymmetric Ni(II)/Cr(II)-mediated coupling reaction: stoichiometric process

[reaction: see text] Via an X-ray analysis, the sulfonamide bearing R(1) = i-Pr, R(2) = Me, and R(3) = Me is shown to be a tridentate ligand to a Cr(III) salt. This class of ligands, represented by R(1) = t-Bu, R(2) = 2-naphthyl, and R(3) = Me, is effective to achieve an asymmetric Ni/Cr-mediated coupling reaction and, with the C14-C38 segment of halichondrins, its synthetic potential has been demonstrated. A possible mechanism is suggested for the process.     

A Nozaki-Hiyama-Kishi Ni(II)/Cr(II) coupling approach to the phomactins

[reaction: see text] Through a unified synthetic strategy, appropriately functionalized bicyclic starting materials can be elaborated via Ni(II)/Cr(II) macrocylization to [9.3.1] bicycles. Elaboration of these core structures allows access to phomactin C/D analogues and establishes the first synthetic approach to phomactin A affording an intact octahydrochromene/macrocyclic ring system.     

Ni(II) and Pd(II) pyridinyloxazolidine-compounds: synthesis, X-ray characterisation and catalytic activities in the aza-Michael reaction

The 3-phenyl-2-(pyridin-2-yl)oxazolidine ligand (ppo) was synthesised and its coordination behaviour regarding Ni(II) and Pd(II) centres was studied. The reaction with K(2)PdCl(4) affords [Pd(N,N'-ppo)Cl(2)] (1), in which ppo binds to palladium via the pyridyl nitrogen and the oxazolyl nitrogen atoms. On the contrary, reaction with NiCl(2)·6H(2)O produces [Ni(N,O-ppo)(2)Cl(2)] (2), in which two ppo ligands are coordinated via the pyridyl nitrogen and the oxygen atom of the oxazolidine ring. The X-ray diffraction analysis of the complexes confirms a square planar geometry for Pd(II) in 1 and an octahedral configuration around Ni(II) in 2, which, to the best of our knowledge, represents the first reported example of a structurally characterised nickel-oxazolidine compound. In addition, both complexes prove to be active catalysts under mild conditions in the aza-Michael reaction of (E)-4-phenylbut-3-en-2-one (benzalacetone) with aliphatic amines.     

Ni(II) salts and 2-propanol effect catalytic reductive coupling of epoxides and alkynes

A Ni-catalyzed reductive coupling of alkynes and epoxides using Ni(II) salts and simple alcohol reducing agents is described. Whereas previously reported conditions relied on Ni(cod)(2) and Et(3)B, this system has several advantages including the use of air-stable and inexpensive Ni(II) precatalysts (e.g., NiBr(2)·3H(2)O) as the source of Ni(0) and simple alcohols (e.g., 2-propanol) as the reducing agent. Deuterium-labeling experiments are consistent with oxidative addition of an epoxide C-O bond that occurs with inversion of configuration.     

Asymmetric catalytic Mannich-type reaction of hydrazones with difluoroenoxysilanes using imidazoline-anchored phosphine ligand-zinc(II) complexes

Asymmetric Mannich-type reaction of hydrazones with difluoroenoxysilanes using chiral zinc(II)-imidazoline-phosphine complexes as catalysts have been established, giving the corresponding adducts in good to excellent enantioselectivity and chemical yields under mild conditions.     

Amidoximes provide facile platinum(II)-mediated oxime-nitrile coupling

The nucleophilic addition of amidoximes R'C(NH(2))═NOH [R' = Me (2.Me), Ph (2.Ph)] to coordinated nitriles in the platinum(II) complexes trans-[PtCl(2)(RCN)(2)] [R = Et (1t.Et), Ph (1t.Ph), NMe(2) (1t.NMe(2))] and cis-[PtCl(2)(RCN)(2)] [R = Et (1c.Et), Ph (1c.Ph), NMe(2) (1c.NMe(2))] proceeds in a 1:1 molar ratio and leads to the monoaddition products trans-[PtCl(RCN){HN═C(R)ONC(R')NH(2)}]Cl [R = NMe(2); R' = Me ([3a]Cl), Ph ([3b]Cl)], cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}] [R = NMe(2); R' = Me (4a), Ph (4b)], and trans/cis-[PtCl(2)(RCN){HN═C(R)ONC(R')NH(2)}] [R = Et; R' = Me (5a, 6a), Ph (5b, 6b); R = Ph; R' = Me (5c, 6c), Ph (5d, 6d), correspondingly]. If the nucleophilic addition proceeds in a 2:1 molar ratio, the reaction gives the bisaddition species trans/cis-[Pt{HN═C(R)ONC(R')NH(2)}(2)]Cl(2) [R = NMe(2); R' = Me ([7a]Cl(2), [8a]Cl(2)), Ph ([7b]Cl(2), [8b]Cl(2))] and trans/cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}(2)] [R = Et; R' = Me (10a), Ph (9b, 10b); R = Ph; R' = Me (9c, 10c), Ph (9d, 10d), respectively]. The reaction of 1 equiv of the corresponding amidoxime and each of [3a]Cl, [3b]Cl, 5b-5d, and 6a-6d leads to [7a]Cl(2), [7b]Cl(2), 9b-9d, and 10a-10d. Open-chain bisaddition species 9b-9d and 10a-10d were transformed to corresponding chelated bisaddition complexes [7d](2+)-[7f](2+) and [8c](2+)-[8f](2+) by the addition of 2 equiv AgNO(3). All of the complexes synthesized bear nitrogen-bound O-iminoacylated amidoxime groups. The obtained complexes were characterized by elemental analyses, high-resolution ESI-MS, IR, and (1)H NMR techniques, while 4a, 4b, 5b, 6d, [7b](Cl)(2), [7d](SO(3)CF(3))(2), [8b](Cl)(2), [8f](NO(3))(2), 9b, and 10b were also characterized by single-crystal X-ray diffraction.     

Sequential separation of Cu(II)/Ni(II)/Fe(II) from strong-acidic pickling wastewater with a two-stage process based on a bi-pyridine chelating resin

A self-synthesized bi-pyridine chelating resin (PAPY) could separate Cu(II)/Ni(II)/Fe(II) sequentially from strong-acidic pickling wastewater by a two-stage pH-adjusted process, in which Cu(II), Ni(II), and Fe(II) were successively preferred by PAPY. In the first stage (pH 1.0), the separation factor of Cu(II) over Ni(II) reached 61.43 in Cu(II)-Ni(II)-Fe(II) systems. In the second stage (pH 2.0), the separation factor of Ni(II) over Fe(II) reached 92.82 in Ni(II)-Fe(II) systems. Emphasis was placed on the selective separation of Cu(II) and Ni(II) in the first-stage. The adsorption amounts of Cu(II) onto PAPY were 1.2 mmol/g in the first stage, while those of Ni(II) and Fe(II) were lower than 0.3 mmol/g. Cu(II) adsorption was hardly affected by Ni(II) with the presence of dense Fe(II), but Cu(II) inhibited Ni(II) adsorption strongly. Part of preloaded Ni(II) could be replaced by Cu(II) based on the replacement effect. Compared with the absence of Fe(II), dense Fe(II) could obviously enhance the separation of Cu(II)-Ni(II). More than 95.0% of Cu(II) could be removed in the former 240 BV (BV for bed volume of the adsorbent) in the fixed-bed adsorption column process with the flow rate of 2.5 BV/h. As proved by X-ray photoelectron spectrometry (XPS) and density functional theory (DFT) analyses, Cu(II) exerted a much stronger deprotonation and chelation ability toward PAPY than Ni(II) and Fe(II). Thus, the work shows a great potential in the separation and purification of heavy metal resources from strong-acidic pickling wastewaters.     

Cathodic stripping voltammetry of nickel: sonoelectrochemical exploitation of the Ni(III)/Ni(II) couple

The exploitation of the Ni(III)/Ni(II) transition as a means of quantifying the concentration of nickel within industrial samples was assessed. The methodology relies upon the reagentless electrodeposition of Ni onto a glassy carbon electrode and the subsequent oxidative conversion of the metallic layer to Ni(III). The analytical signal is derived from a cathodic stripping protocol in which the reduction of the Ni(III) layer to Ni(II) is monitored through the use of square wave voltammetry. The procedure was refined through the introduction of an ultrasonic source which served to both enhance the deposition of nickel and to remove the nickel hydroxide layer that results from the measurement process. A well-defined stripping peak was observed at +0.7 V (vs. AgAgCl) with the response found to be linear over the range 50 nM to 1 μM (based on a 30 s deposition time). Other metal ions such as Cu(II), Mn(II), Cr(III), Pb(II), Cd(II), Zn(II), Fe(III) and Co(II) did not interfere with the response when present in hundred fold excess. The viability of the technique was evaluated through the determination of nickel within a commercial copper nickel alloy and validated through an independent comparison with a standard ICP-AES protocol.     

Ni(II)/Zn catalyzed reductive coupling of aryl halides with diphenylphosphine oxide in water

P-Arylation in water has been developed via cross-coupling of aryl halides with diphenylphosphine oxide (Ph(2)P(O)H) and (R(P))-(-)-menthyl benzylphosphinate catalyzed by NiCl(2)·6H(2)O/Zn under relatively mild conditions.     

Isomeric [RuCl2(dmso)2(indazole)2] complexes: ruthenium(II)-mediated coupling reaction of acetonitrile with 1H-indazole

Reaction of the antitumor complex trans-[Ru(III)Cl4(Hind)2]- (Hind = indazole) with an excess of dimethyl sulfoxide (dmso) in acetone afforded the complex trans,trans,trans-[Ru(II)Cl2(dmso)2(Hind)2] (1). Two other isomeric compounds trans,cis,cis-[Ru(II)Cl2(dmso)2(Hind)2] (2) and cis,cis,cis-[Ru(II)Cl2(dmso)2(Hind)2] (3) have been obtained on refluxing cis-[Ru(II)Cl(2)(dmso)(4)] with 2 equiv. of indazole in ethanol and methanol, respectively. Isomers 1 and 2 react with acetonitrile yielding the complexes trans-[Ru(II)Cl2(dmso)(Hind){HN=C(Me)ind}].CH3CN (4.CH3CN) and trans,cis-[Ru(II)Cl2(dmso)2{HN=C(Me)ind}].H2O (5.H2O), respectively, containing a cyclic amidine ligand resulting from insertion of the acetonitrile C triple bond N group in the N1-H bond of the N2-coordinated indazole ligand in the nomenclature used for 1H-indazole. These are the first examples of the metal-assisted iminoacylation of indazole. The products isolated have been characterized by elemental analysis, IR spectroscopy, UV-vis spectroscopy, electrospray mass-spectrometry, thermogravimetry, differential scanning calorimetry, 1H NMR spectroscopy, and solid-state 13C CP MAS NMR spectroscopy. The isomeric structures of 1-3 and the presence of a chelating amidine ligand in 4 and 5 have been confirmed by X-ray crystallography. The electrochemical behavior of 1-5 and the formation of 5 have been studied by cyclic voltammetry.     

A new alkyltin (IV)-mediated coupling reaction of aldehydes to olefins

Various olefins were synthesized by coupling reactions via the corresponding α-stannylalkyl halides derived from aldehydes. A cross-coupling reaction using the different types of α-stannylalkyl halides, based on the difference of their reactivities, was also achieved.     

不对称Salen配体的Ni(Ⅱ)/Cu(Ⅱ)/Mn(Ⅲ)配合物的合成及其晶体结构

将(1R,2R)-环己二胺与2-羟基-1-萘甲醛和3,5-二叔丁基水杨醛反应,得到非对称Salen配体H2L,然后将配体H2L与Ni(OAc)2·4H2O、Cu(OAc)2·H2O、Mn(OAc)2·4H2O进行配位反应,得到3个单核配合物[Ni(L)]·CH2Cl2(1),[Cu(L)](2),[Mn(L)(Cl)]·CH2Cl2(3),分别采用1H NMR、FT-IR和元素分析对化合物进行了表征,并通过X射线单晶衍射技术测定了配体和3个配合物的晶体结构。配体H2L属于正交晶系,P212121空间群。配合物1属于单斜晶系,P21/c空间群,而配合物2和配合物1的结构相似。配合物3属于三斜晶系,P1空间群。     

Nickel(II) complexes with bifunctional phosphine-imidazolium ligands and their catalytic activity in the Kumada-Corriu coupling reaction

Zwitterionic Ni(II) complexes of type NiX₃(NCN⁺), (NCN⁺ = 1-(2-diphenylphosphinoethyl)-3-(2,4,6-trimethylphenyl)imidazolium and X = Cl, 6; Br, 7), have been prepared by addition of NCN⁺ bromide (1a) or tetrafluoroborate (1b) to NiX₂L, and characterised by X-ray crystallography. They have been used as catalytic precursors in the Kumada-Corriu coupling reaction between phenylmagnesium chloride and 4-chloroanisole, yielding high catalytic activities. Stoechiometric deprotonation investigations did not provide clear evidence for the formation of coordinated carbene species.     

Catalytic phosphorus(V)-mediated nucleophilic substitution reactions: development of a catalytic Appel reaction

Catalytic phosphorus(V)-mediated chlorination and bromination reactions of alcohols have been developed. The new reactions constitute a catalytic version of the classical Appel halogenation reaction. In these new reactions oxalyl chloride is used as a consumable stoichiometric reagent to generate the halophosphonium salts responsible for halogenation from catalytic phosphine oxides. Thus, phosphine oxides have been transformed from stoichiometric waste products into catalysts and a new concept for catalytic phosphorus-based activation and nucleophilic substitution of alcohols has been validated. The present study has focused on a full exploration of the scope and limitations of phosphine oxide catalyzed chlorination reactions as well as the development of the analogous bromination reactions. Further mechanistic studies, including density functional theory calculations on proposed intermediates of the catalytic cycle, are consistent with a catalytic cycle involving halo- and alkoxyphosphonium salts as intermediates.     

Zn(II)/amine-catalyzed coupling reaction of alkylidenemalonates with propargyl alcohol: a one-pot synthesis of methylenetetrahydrofurans

[reaction: see text] A metal-catalyzed tandem 1,4-addition/cyclization between propargyl alcohol and a Michael acceptor, such as alkylidene malonate, has been developed. In the presence of catalytic amounts of zinc triflate [Zn(OTf)(2)] and triethylamine (Et(3)N), various 2-alkylidene-1,3-dicarbonyl compounds reacted with propargyl alcohol to give 3- or 4-methylene tetrahydrofurans in excellent yields.     

Asymmetric Henry reaction catalyzed by oxazolinyl Cu(II) complexes

A novel family of oxazolinyl copper(II) catalysts have been developed and used as Lewis acid catalysts in the asymmetric Henry reaction of various aldehydes with nitromethane. The corresponding nitroalcohol products were obtained in moderate yields (40–80%) and with moderate enantioselectivity (10–40% ee).