The oxidation of alcohols with O-iodoxybenzoic acid (IBX) in aqueous nanomicelles at room temperature

GMPGS-2000, a nonionic amphiphile composed of Guerbet alcohol (2-octyldodecan-1-ol), MPEG-2000 and succinic acid, has been prepared as an effective nanomicelle forming species for the oxidation of alcohols with 2-iodoxybenzoic acid (IBX) in water at room temperature.     

6-Membered pseudocyclic IBX acids: syntheses, X-ray structural characterizations, and oxidation reactivities in common organic solvents

We designed and synthesized λ(5)-cyclic periodinanes 1 and 2, which are homologous to IBX (1-hydroxy-1-oxo-1H-1λ(5)-benzo[d][1,2]iodoxol-3-one) by one carbon, to thwart close packing of molecules in the crystal lattice to permit solubility in common organic solvents and to facilitate oxidations with enhanced reactivity. The X-ray crystal structures revealed that both 1 and 2 exist in the solid state as pseudocyclic (PC) acids, i.e., 1PC and 2PC, and that the molecules in the lattice are less weakly associated as compared to those in the parent IBX due to the twisting introduced via the sp(3) benzylic carbon. Both 1PC and 2PC are found to dissolve in palpable amounts in DCM and acetonitrile to allow oxidation of a variety of alcohols and sulfides to carbonyl compounds and sulfoxides in a facile manner. The subtle differences in the sterics due to methyl and ethyl substituents in 1PC and 2PC are found to manifest in contrasting reactivities in that the oxidations of alcohols occur faster with 2PC, while those of sulfides to sulfoxides occur more rapidly with 1PC.     

A simple method for the oxidation of primary alcohols with o-iodoxybenzoic acid (IBX) in the presence of acetic acid

A simple method for the oxidation of primary alcohols to aldehydes using o-iodoxybenzoic acid (IBX) with the addition of stoichiometric acetic acid has been developed. Addition of acetic acid significantly accelerated the reaction rate. Under these conditions, primary aliphatic, benzylic, and allylic alcohols are smoothly converted to aldehydes in high yields (90-97%).     

Fluorescence study of fullerene in organic solvents at room temperature

At room temperature, fluorescence spectra for C60 in organic solvents of four typical kinds have been reported, which indicate that intensity of fluorescence and fine structure of fluorescence peaks are dependent on the interaction between C60 and solvent. It is shown that the solvents of effective electron donors could make a comparatively strong interaction with fullerenes due to formation of the charge transfer adduct, which could greatly distort the molecular symmetry, leading to the strong and well-resolved fluorescence. The strong fluorescence spectra for C70 in room temperature solutions are also observed.     

HKUST-1/ABNO-catalyzed aerobic oxidation of secondary benzyl alcohols at room temperature

Efficient heterogeneous Cu-catalyzed aerobic oxidation of benzyl alcohols was discolsed. The combination of HKUST-1 and ABNO exhibited enhanced catalytic activity compare to the previous HKUST-1/TEMPO system in aerobic oxidation of benzyl alcohols. It was observed that the present catalyst was intrinsically heterogeneous and reusable.     

A convenient palladium-catalyzed aerobic oxidation of alcohols at room temperature

A simple Pd-catalyzed aerobic oxidation of benzylic and aliphatic alcohols to the corresponding aldehydes and ketones at room temperature is described.     

Studies on oxidations with IBX: oxidation of alcohols and aldehydes under solvent-free conditions

A variety of allylic and benzylic alcohols are oxidized to their respective carbonyl compounds with IBX under solvent-free conditions at ca. 60-70 °C. It has also been found that some of the aromatic aldehydes also undergo oxidation when heated with IBX at 90 °C under solvent-free conditions; notably, this transformation does not occur under the otherwise identical but heterogeneous conditions.     

In situ organogelation at room temperature: direct synthesis of gelators in organic solvents

Organogels are formed through a conventional organogelation involving a heating process and an in situ organogelation at room temperature. The conventional organogelation is carried out by dissolution of gelators by heating, while the in situ organogelation is performed by mixing of highly reactive methyl 2,6-diisocyanatohexanoate (LDI) or 2-isocyanatoethyl 2,6-diisocyanatohexanoate (LTI) and alkylamines. The in situ organogelation produced the organogels within several seconds after mixing. The organogels prepared by the in situ organogelation showed quite similar FT-IR spectra and SEM photographs to those formed by conventional organogelation. Moreover, the in situ organogelation using LTI and octylamine as well as dodecylamine produced organogels of acetone, ethyl acetate, and acetonitrile that gelators 5 and 6 cannot gel through conventional organogelation.     

The aerobic oxidation of alcohols with a ruthenium porphyrin catalyst in organic and fluorinated solvents

Carbonylruthenium tetrakis(pentafluorophenyl)porphyrin Ru(TPFPP)(CO) was utilized for the aerobic oxidation of alcohols. The in situ activation of the catalyst with mCPBA provided a species capable of catalyzing the oxidation of alcohols with molecular oxygen. The choice of solvent and additive was crucial to obtaining high activity and selectivity. Secondary aromatic alcohols were oxidized in the presence of the ruthenium porphyrin and tetrabutyl ammonium hydroxide in the solvent bromotrichloromethane, enabling high yields to be achieved (up to 99%). Alternatively, alcohols could be oxidized in perfluoro(methyldecalin) with the ruthenium porphyrin at higher temperatures (140 degrees C) and elevated oxygen pressures (50 psi).     

Practical Os/Cu-cocatalyzed air oxidation of allyl and benzyl alcohols at room temperature and atmospheric pressure

[reaction: see text] A new protocol for the oxidation of primary and secondary allyl and benzyl alcohols at room temperature and using 1 atm of air is described. The procedure uses low loadings of copper salts and osmium tetroxide, which is activated with quinuclidine and prereduced with an alkene. Chemoselectivity for allyl and benzyl alcohols is very high, no overoxidation is observed, and the reaction takes place under neutral conditions.     

Polymer-micelle incarcerated ruthenium catalysts for oxidation of alcohols and sulfides

Highly active immobilized ruthenium catalysts, which can be used for oxidation of alcohols and sulfides, were developed on the basis of the polymer-micelle incarcerated (PMI) method. The catalysts could be recovered and reused several times without loss of activity and no metal leaching was observed. Selection of micelle-forming conditions and polymer structures were key in achieving high activities. TEM and SEM analyses were conducted to observe the structures of PMI-Ru.     

Oxidation of alcohols by chlorine dioxide in organic solvents

The kinetics of oxidation of a series of alcohols (propan-2-ol, 2-methylpropan-1-ol, butan-1-ol, butan-2-ol, 3-methylpentan-1-ol, heptan-4-ol, decan-2-ol, cyclohexanol, borneol) by chlorine dioxide in organic solvents was studied using spectrophotometry. The reaction is described by the second-order rate equation w = k[ROH][ClO₂]. The rate constants were measured in the range of 10–60 °C, and the activation parameters of the processes were calculated. The products were identified, and the yields were determined.     

Modified Markó’s aerobic oxidation of alcohols under atmospheric pressure with air or molecular oxygen at room temperature

A modified version of Markó’s aerobic oxidation procedure, using highly pure (99.995+%) CuCl with 4,7-diphenyl-1,10-phenanthroline (dpPhen), DBAD, and Cs₂CO₃ (98% purity) successfully oxidized primary and secondary alcohols to the corresponding aldehydes and ketones in excellent yield at room temperature with either air or molecular oxygen under atmospheric pressure.     

Controlling ultralong room temperature phosphorescence in organic compounds with sulfur oxidation state

Sulfur oxidation state is used to tune organic room temperature phosphorescence (RTP) of symmetric sulfur-bridged carbazole dimers. The sulfide-bridged compound exhibits a factor of 3 enhancement of the phosphorescence efficiency, compared to the sulfoxide and sulfone-bridged analogs, despite sulfone bridges being commonly used in RTP materials. In order to investigate the origin of this enhancement, temperature dependent spectroscopy measurements and theoretical calculations are used. The RTP lifetimes are similar due to similar crystal packing modes. Computational studies reveal that the lone pairs on the sulfur atom have a profound impact on enhancing intersystem crossing rate through orbital mixing and screening, which we hypothesize is the dominant factor responsible for increasing the phosphorescence efficiency. The ability to tune the electronic state without altering crystal packing modes allows the isolation of these effects. This work provides a new perspective on the design principles of organic phosphorescent materials, going beyond the rules established for conjugated ketone/sulfone-based organic molecules.

Sulfur lone pairs in bridged dimers enhance intersystem crossing and phosphorescence through orbital mixing and electrostatic screening.     

CuCl catalyzed selective oxidation of primary alcohols to carboxylic acids with tert-butyl hydroperoxide at room temperature

Direct oxidation of primary alcohols to the corresponding carboxylic acids is performed highly efficiently at room temperature with anhydrous tert-butyl hydroperoxide in the presence of a catalytic amount of easily available CuCl under ligand free conditions in acetonitrile. Benzylic alcohols are more reactive than aliphatic alcohols, and these benzylic alcohols are selectively oxidized to the corresponding acids in the presence of aliphatic alcohols such as 1-octanol and 1-decanol.     

Mild oxidation of alcohols with o-iodoxybenzoic acid (IBX) in water/acetone mixture in the presence of beta-cyclodextrin

A mild and efficient oxidation of alcohols with o-iodoxybenzoic acid (IBX) catalyzed by beta-cyclodextrin in a water/acetone mixture (86:14) has been developed. A series of alcohols were oxidized at room temperature in excellent yields.     

TEMPO-linked metalloporphyrins as efficient catalysts for selective oxidation of alcohols and sulfides

Six new TEMPO-linked porphyrins and metalloporphyrins were synthesized and they exhibited efficient catalytic activity for selective oxidation of alcohols and sulfides to the corresponding aldehydes, ketones and sulfoxides using NaOCl as oxidant.     

Specific features of lecithin oxidation in organic solvents

The effect of the structurization of a natural surfactant, egg phosphatidylcholine (lecithin, LH), in solutions in organic solvents on the kinetics of its oxidation by molecular oxygen is studied. The oxidation of LH proceeds via chain free-radical mechanism like the oxidation of hydrocarbons and oils; the oxidizability of LH is close to that of cyclohexene derivatives, methyl linoleate, and sunflower oil. The formation of reverse micelles in LH solutions results in a nonlinear dependence of the rate of oxygen absorption on the substrate concentration. Strong oil-soluble antioxidants decelerate oxygen absorption, however, do not suppress intramicellar oxidation. The addition of CaCl₂ causes the disintegration of reverse LH micelles. Resulting LH-CaCl₂ adduct is oxidized at a higher rate than the original LH and catalyzes the formation of radicals through the decomposition of hydroperoxides similarly to acetylcholine chloride.     

A simple and advantageous protocol for the oxidation of alcohols with O-iodoxybenzoic acid (IBX)

[reaction: see text] An efficient, user-friendly procedure for the oxidation of alcohols using IBX is described. Simply heating a solution of the alcohol in the presence of suspended IBX followed by filtration and removal of the solvent gives excellent yields of the corresponding carbonyl compounds. We illustrate this procedure with a panel of primary and secondary alcohol substrates and note that it allows recycling and reuse of the oxidant.     

Selective and solventless oxidation of organic sulfides and alcohols using new supported molybdenum (VI) complex in microwave and conventional methods

A new dioxo-molybdenum (VI) complex supported on functionalized Merrifield resin ( MR-Mo ) has been synthesized and characterized by elemental, scanning electron mcroscopy, energy-dispersive X-ray analysis, TGA, Brunauer–Emmett–Teller method, powder-X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy and DRS–UV–vis analysis. The virgin Merrifield resin ( MR ) was functionalized by carbonylation followed by Schiff base formation with ethanolamine ( MR-SB ). Experimental data showed that the Schiff base coordinated with the MoO₂²⁺ moiety via O- and N-atoms. The catalytic activity of MR-Mo was explored under solventless conditions toward the oxidation of organic sulfides and alcohols using 30% aqueous H₂O₂ as oxidant. The oxidation reactions were conducted under microwave and conventional methods. The microwave-assisted oxidation reactions were found to be many times faster than the conventional methods. The oxidation reactions were selective and formed sulfoxides or aldehydes as the sole product with superior TOF values among the molybdenum (VI)-based complexes. Besides these, the MR-Mo was purely heterogeneous in nature and can be recycled for at least five reaction cycles without the loss of catalytic efficiency and product selectivity.