羧酸三环己基锡盐的合成和结构分析

报导了三环己基氢氧化锡同羧酸的反应, 考察了影响产物收率的因素并合成了23个新的羧酸三环己基锡类化合物, 通过红外光谱和质谱等确定了这类化合物的结构, 并证明锡的配合物价为4.     

Cyclohexyl "base pairs" stabilize duplexes and intensify pyrene fluorescence by shielding it from natural base pairs

In this study, we investigated the stability and structure of artificial base pairs that contain cyclohexyl rings. The introduction of a single pair of isopropylcyclohexanes into the middle of DNA slightly destabilized the duplex. Interestingly, as the number of the "base pairs" increased, the duplex was remarkably stabilized. A duplex with six base pairs was even more stable than one containing six A-T pairs. Thermodynamic analysis revealed that changes in entropy and not enthalpy contributed to duplex stability, demonstrating that hydrophobic interactions between isopropyl groups facilitated the base pairing, and thus stabilized the duplex. NOESY of a duplex containing an isopropylcyclohexane-methylcyclohexane pair unambiguously demonstrated its "pairing" in the duplex because distinct NOEs between the protons of cyclohexyl moieties and imino protons of both of the neighboring natural base pairs were observed. CD spectra of duplexes tethering cyclohexyl moieties also showed a positive-negative couplet that is characteristic of the B-form DNA duplex. Taken together, these results showed that cyclohexyl moieties formed base pairs in the DNA duplex without severely disturbing the helical structure of natural DNA. Next, we introduced cyclohexyl base pairs between pyrene and nucleobases as an "insulator" that suppresses electron transfer between them. We found a massive increase in the quantum yield of pyrene due to the efficient shielding of pyrene from nucleobases. The cyclohexyl base pairs reported here have the potential to prepare highly fluorescent labeling agents by multiplying fluorophores and insulators alternately into DNA duplexes.     

Dynamic mechanical properties of poly-α-olefins containing ring structures in side chains

Dynamic loss modulus curves have been determined over a temperature range beginning at liquid nitrogen temperature for poly-α-olefin polymers containing various ring structures, i.e., phenyl, cyclohexyl, cyclopentyl, and naphthyl, in the side chain. Glass transition and appropriate secondary relaxation temperatures were observed for each polymer. Separation of each pendant ring structure from the main backbone chain by successive additions of methylene units results in lower glass-transition temperatures. Comparison of polymers with similar side chains and different ring structures shows that the respective glass-transition temperatures decrease in the order naphthyl > cyclohexyl > phenyl > cyclopentyl. Secondary relaxation peaks were obtained at about ?150°C for polymers containing the cyclohexyl and cyclopentyl rings. A similar peak was observed for the polymer possessing a phenyl ring separated from the main chain backbone by two methylene units. The comparable polymer containing the naphthyl ring structure exhibited a broad secondary relaxation peak centered at ?20°C. The polymers possessing cyclohexyl rings separated from the main chain backbone by one or two methylene units had an additional low temperature peak at ?80°C. The molecular mechanism associated with this relaxation may be related to intramolecular transformations of the cyclohexyl ring between its “chair–chair” conformations.     

Molecular organization of the coupling agent interphase of fiber-glass reinforced plastics

The structure of the silane coupling agent interphase of fiber-glass reinforced plastics has been studied by Fourier transform infrared and laser Raman spectroscopy. It is found that there is a degree of order in the molecular organization of the coupling agent interphase for the vinyl and cyclohexyl functional silane coupling agents. When a cyclohexyl functional silane is used, crystalline layers of silanetriol on the glass fibers are observed. The extent of order is determined by the structure of the adsorbed species, which is influenced by the structure of the silane in the treating solution. Two factors introducing disorder in the interphase are the magnitude of aggregation of the silanes in solution and irregularities in the topology of the glass surface.     

酸性聚离子液体溶胀诱导自组装形成类蜂窝状固体酸催化剂及其高效催化水解反应

酸催化反应在化学工业中占据着十分重要的地位.传统的液体酸催化剂催化性能优异,但面临着能耗高,腐蚀设备和环境污染严重等问题.相比于传统的液体酸催化剂,固体酸催化剂,如分子筛和磺酸树脂等大大缓解了经济和环境方面的问题,但也存在着催化活性差和易失活等缺陷.酸性聚离子液体因其高密度的反应活性位点,可设计调变的结构和酸性以及可循环利用等特性而成为一种新型的高效多相酸催化剂,引起了广泛的研究兴趣.然而,当酸性聚离子液体用作催化剂时,由于其酸中心不能充分地暴露在反应底物中,使得它们的催化活性难以达到甚至超越均相催化剂的水平.因此,发展一种催化活性高于均相的酸性聚离子液体催化剂仍是一个巨大的挑战.我们研究组发现在反应底物中溶胀的聚离子液体可作为一种准均相催化剂,其催化活性与相应的均相离子液体相当,这为提高多相催化剂的催化活性提供了一种新的策略.本文报道了一种在水中溶胀且自组装成类蜂窝状网络结构的酸性聚离子液体催化剂,该催化剂在水解和水合反应中表现出优异的催化性能,其活性高于均相酸催化剂.首先通过自由基聚合和酸化两步合成了一系列在水中高度溶胀的酸性聚离子液体(SAPIL-1-6).以三甲基磷氧(TMPO)为探针分子,用31P魔角旋转核磁共振(31P-TMPO NMR)对SAPILs的酸性进行了分析.结果表明,SAPILs具有中等强度的单一酸性.热重分析表明SAPILs拥有优异的热稳定性能(300-345℃),显著地优于商用磺酸树脂Amberlite IR-120(H)(245℃).扫描电镜和冷冻电镜表明,当SAPILs在水中溶胀时,无孔的结构会自发地形成微米级三维类蜂窝状网络结构.这些类蜂窝状网络结构的酸性聚离子液体在催化乙酸环己酯水解制备环己醇中表现出卓越的催化性能,其催化活性明显高于多相酸催化剂(Amberlite IR-120(H)和H-ZSM-5)和均相酸催化剂(硫酸,对甲苯磺酸和均相酸性离子液体[VSIm]HSO4).通过气相色谱定量分析了在一系列模拟的反应体系中溶胀SAPIL-1内部和外部各组分的平衡浓度,发现SAPIL-1内部乙酸环己酯的浓度和乙酸环己酯与环己醇的摩尔比分别是其外部的7.5-23.3倍和4.5-16.4倍,这表明在反应过程中乙酸环己酯被大量富集.此外,SAPILs在环己烯直接水合制备环己醇以及环氧乙烷水合制备乙二醇的反应中均表现出优异的催化性能.值得说明的是,SAPILs具有很好的循环使用性能,10次循环后催化活性无明显改变.这些具有蜂窝状结构和对反应底物高富集SAPILs的成功合成及应用为开发高效的多相酸催化剂提供了一种新的思路.     

Cyclohexane oxidation catalyzed by variable-valence metal compounds in the presence of propionic aldehyde

The effect of propionic aldehyde additives on the kinetics and mechanism of cyclohexane oxidation by molecular oxygen catalyzed by variable-valence metal salts is studied. The effect of the catalyst metal (M) on the rate of oxygen consumption, yield, and ratio of reaction products (cyclohexanol, cyclohexanone, cyclohexyl hydroperoxide (CHHP), and propionic acid and peracid) is studied. The catalytic functions of the variable-valence metal salts are determined by their ability to influence the rate of the homolysis of the O–O bonds of peroxide compounds, which correlates with the redox potential of the metal ion for most of the catalysts studied. The fact that other salts of variable-valence metals do not fit this correlation is due to the multifunctional action of catalysts involved in chain initiation, termination, and degenerate branching. The main role of aldehyde in the process under consideration is to promote oxidation. According to the quantum-chemical studies, the catalyst cation largely determines both the structure of the [Mⁿ⁺-CHHP] transition complex and the rates of competitive homolysis and heterolysis of cyclohexyl hydroperoxide.     

顺,反-4-三甲(代)甲硅烷基环己醇类似物及其衍生物的电子轰击质谱

本文首次报道了一系列顺, 反-4-三甲(代)甲硅烷基环己醇类似物及其衍生物的电子轰击(EI)质谱。根据亚稳离子分析和精确质量测量数据推断了它们的碎裂规律。硅的原子结构特征和官能团的空间构型对其碎裂过程有明显的影响, 其谱态可作为上述立体异构体的结构区分特征。     

An Efficient Synthetic Method and Single Crystal Structure of a 2:3 Adduct of Cyclohexyl Isocyanide and Dimethyl Acetylenedicarboxylate

An efficient synthetic method and single crystal structure of a 2:3 adduct of cyclohexyl isocyanide and dimethyl acetylenedicarboxylate are described.     

Improved Efficiency of Molecular‐Gel Formation by Adjusting Preorganization of Amino‐Acid‐Derived Flexible Molecules: A NMR and Thermodynamic study

The efficiency of the formation of molecular gels of simple derivatives of l ‐valine and l ‐isoleucine is greatly improved in different organic solvents when a hexyl fragment is replaced by a bulkier cyclohexyl one. A study using NMR and IR spectroscopy provides information on the preferred conformations of the molecules, indicating that the cyclohexyl moiety precludes intramolecular H bonding and preorganises the system for intermolecular interactions, which are responsible for fiber formation. NMR data of the gels provides thermodynamic data on fibrillization, revealing that the origin of this effect is mainly entropic. Electron microscopy (SEM and TEM) images show fibrillar and tape‐like objects, which are observed commonly in molecular gels. Rheological measurements reveal significant differences between cyclohexyl and hexyl appended gelators. These findings could contribute to the rational design of small, flexible, building blocks for self‐assembly.     

Nematic liquid crystals with a tetrafluoroethylene bridge in the mesogenic core structure

A dramatic increase of the clearing temperatures of liquid crystals based on bis(cyclohexyl)ethane 1 by 50 to 70 K can be achieved by the perfluorination of the central ethylene link. Conformational analysis indicates that this effect is due to the increased rigidity of the mesogenic core structure and to the suppression of conformers with a bent shape. Materials based on bis(cylohexyl)tetrafluoroethane 2 might play a crucial role as materials for the next generation of active matrix LCDs with reduced power consumption.     

Structures électroniques du fluorocyclohexane et du gem-difluorocyclohexane

CNDO/2 calculations were performed on cyclohexane, cyclohexyl fluoride and 1,1-difluorocyclohexane. The electronic structure is discussed and compared with experimental data.     

Skeletal rearrangements of protonated molecular ions of some ethers

Skeletal rearrangements are reported of protonated molecular ions in the chemical ionization mass spectra of allyl cyclohexyl ether, benzyl cyclohexyl ether, t-butyl cyclohexyl ether and dibenzyl ether.     

Cationic polymerization behavior of isobutyl vinyl ether with arenesulfonates as non‐salt‐type latent thermal initiators

Substituted and unsubstituted benzenesulfonic acid cyclohexyl esters (1–7) were synthesized, and their possibility as latent thermal initiators in the cationic polymerization of isobutyl vinyl ether (IBVE) was examined to develop novel non‐salt type latent cationic initiators. Thermal decomposition of cyclohexyl p‐nitrobenzenesulfonate (2) in C₆D₆ at 80°C proceeded to exclusively afford cyclohexene as well as p‐nitrobenzenesulfonic acid. Cationic polymerization of IBVE with 1 mol % of an arenesulfonate (1–6) in bulk was carried out at 40–100°C for 12 h. No polymerization took place below 50°C, while the consumption of IBVE depending on both the polymerization temperature and the structure of the arenesulfonates was observed above 60°C. The obtained polyIBVEs showed bimodal GPC curves in several cases, revealing the intervention of two independent propagation species in the polymerization. The cationic polymerization of IBVE with cyclohexyl 2,4,6‐triisopropylbenzenesulfonate (7) at 80°C confirmed the acceleration effect of bulkiness on the polymerization rate. It was concluded that the polymerization was largely dependent on both electronic and steric factors of the aryl groups of the initiators which were directly related to the stability of the sulfonate anions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 293–301, 1999     

Synthesis of spiropyrrolidines: 1,3‐dipolar cycloaddition reactions of an azomethine ylide to unusual dipolarophiles; a molecular orbital study of the cycloaddition reaction

A simple and efficient method for the synthesis of novel spiropyrrolidines has been accomplished by regioselective 1,3‐dipolar cycloaddition reactions of an azomethine ylide generated by thermal‐ring opening of cis‐1‐cyclohexyl‐2‐phenyl‐3‐benzoyl aziridine with various (E)‐3‐arylidene‐4‐chromanones. The synthesis proceeds in good yield to afford novel spiropyrrolidines, 1‐cyclohexyl‐2‐phenyl‐3‐aryl‐5‐benzoylpyrrolidine‐spiro‐[4.3′]4′‐chromanones. The X‐ray crystal structure analysis of one of the products confirms its structure. Molecular orbital calculations were performed to investigate the regioselectivity of the cycloaddition process. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 500–507, 1999     

Conformational Analysis,RIS Models and Single‐Chain Properties of Structurally Modified Polycarbonates, 1. Effect of Cyclohexyl and Phenyl Ring Substitutions

Conformational properties of segments and chains of structurally different polycarbonates are investigated in detail. Conformational analysis and rotational isomeric state (RIS) models for some of the polycarbonates and single‐chain properties of all the polycarbonates are reported here for the first time. Substitution of the methyl group on the bisphenol phenyl rings results in increased energy barriers to rotations as well as changes in positions of local minima, compared to the case without substitutions. Conformational structure about the isopropylidene linkage C_α atom is not altered by ortho methyl substitutions on the rings. Substitution by a cyclohexyl ring rigidly attached to the C_α atom restricts conformational mobility within the bisphenol unit. Rotational flexibility of the phenyl–oxygen bond is hindered by additional substitutions on the cyclohexyl ring. The carbonate group prefers the trans–trans conformation in all the polycarbonates. The energy difference between the cis–trans and trans–trans states of the carbonate group is lowered by the ortho methyl substituent on the phenyl rings. There is a reduction in 〈R²〉, 〈S²〉, and C_n accompanying the substitutions. The introduction of other substituents on a cyclohexyl polycarbonate results in an increase in all chain dimensions including the persistence length. Also, the cyclohexyl or trimethylcyclohexyl substituents do not significantly alter the overall average shape of the chains. Substitutions both on the phenyl rings and at the isopropylidene linkage lead to a compaction of the polymer chain, but the effect is more pronounced when due to substituents on phenyl rings.     

凝胶法制备条件对载体硅胶孔结构的影响

以水玻璃、硫酸为原料采用凝胶法制备了烯烃环氧化催化剂载体硅胶,为探讨制备条件对硅胶孔结构的影响,采用物理吸附仪对不同条件下制备的硅胶进行了表征,结果表明:溶胶pH值、老化温度和老化时间、氨水pH值对硅胶孔结构影响显著,当溶胶pH值为1.5,在80℃下用pH 10.5的氨水浸泡老化凝胶2 h,所得硅胶的比表面积在300 m2.g-1左右,孔径和孔容分别在9.71 nm和0.92 cm3.g-1以上,以此硅胶为载体制得的非均相催化剂Ti/SiO2对于氯丙烯和环己基过氧化氢的环氧化反应具有明显的催化活性。     

Electron impact fragmentation of some cyclohexyl thiophosphororganic amides

This paper presents the mass spectra, fragmentation pathways and structures of ions obtained by electron impact from methyl cyclohexyl phosphinomorpholinylamidothioate (1), cyclohexyl phosphonomorpholinylamidochloridothioate (2), cyclohexyl morpholinylamidophosphonothioic acid (3) and O-methyl cyclohexyl phosphonomorpholinylamidothioate (4). The fragmentation pathways and ion structures were established by exact mass determinations on compound 1 and by metastable transitions of all the compounds.     

Substituent effects on the rearrangements of cyclohexyl to cyclopentyl radicals involving avermectin-related radicals

The rearrangement of a substituted cyclohexyl radical to a cyclopentylmethyl radical on the skeleton of avermectin B1 has been investigated using density functional (UB3LYP/6-31G(d)) and G3MP2B3 computational methods. The rearrangement is preferred when highly radical stabilizing groups are present at the 2- and 3-positions of the cyclohexyl radical. A substituent on the 3-position of the cyclohexyl radical enables ring-cleavage of the cyclohexyl radical, while a radical stabilizing substituent on the 2-position of the cyclohexyl radical stabilizes the final cyclopentylmethyl radical, enabling the overall rearrangement and reversing the normal thermodynamic preference for the hexenyl radical ring closure.     

混合金属氧化物固载杂多酸的制备及催化性能

杂多酸是一类含氧桥的多核无机高分子化合物,由于其独特的笼型结构而具有许多优异的性能,尤其是作为一种新型的多功能催化剂越来越受到人们的关注。因此,近年来人们一直致力于研究新型固载杂多酸催化剂。本文介绍了钛钨混合金属氧化物固载杂多酸催化剂HPA／TiO2-WO3的制备,及催化合成甲酸环己酯的方法,此法具有反应时间短、催化剂价廉易得、工艺简单、酯产率较高等优点。     

Reactivities of methacrylate derivatives in radical polymerization as evaluated by mercury method

Reactivities of methyl methacrylate derivatives bearing substituents on the ester methyl group have been investigated by competitively adding a cyclohexyl radical generated by a reaction of cyclohexylmercuric chloride with sodium borohydride (mercury method) to these substituted methacrylates and methyl methacrylate or styrene. The relative rate constants of the cyclohexyl radical addition have been found to be nicely correlated with parameters such as Traft α* constants of alkyl esters, Q–e values, lowest unoccupied molecular orbital energies, β-carbon chemical shifts, and relative reactivities toward a polystyryl radical, indicating that the mercury method is a simple and useful technique for evaluation of the relationship between structure and reactivity of vinyl monomers in their radical polymerization, even when the structural modification is small.