Relaxed GexSi1−x layer formation with reduced dislocation density grown by ultrahigh vacuum chemical vapor deposition

A mixture of as-grown single-wall carbon nanotubes (SWNTs) and a monochlorobenzene (MCB) solution of polymethylmethacrylate (PMMA) was sonicated and homogenized. As a result, SWNTs were separated from carbonaceous impurities and metal particles, which enabled us to purify the SWNTs by filtration. We also found that the number of short (about 1-μm) SWNTs and thin bundles of SWNTs increased. The thin bundles contained one to three SWNTs. These short, thin SWNTs suspended in the MCB solution of PMMA were spin-coated onto a Si wafer, and could be dispersed on it. Received: 18 July 2000 / Accepted: 20 July 2000 / Published online: 6 September 2000     

CVD synthesis and purification of single-walled carbon nanotubes on aerogel-supported catalyst

Single-walled carbon nanotubes (SWNTs) were synthesized by disproportionation of carbon monoxide on an aerogel-supported Fe/Mo catalyst. A simple acidic treatment followed by an oxidation process produced a high purity (>99%) of SWNTs. The nanotubes obtained are bundled SWNTs and free of amorphous-carbon coating. Several factors that affect the yield and the quality of the SWNTs were also studied. This method shows great promise for large-scale production of SWNTs. Received: 30 August 2001 / Accepted: 3 December 2001 / Published online: 4 March 2002     

Field emission from single-walled carbon nanotubes aligned on a gold plate using a self-assembly monolayer

Field emission from single-walled carbon nanotubes (SWNTs) aligned on a patterned gold surface is reported. The SWNT emitters were prepared at room temperature by a self-assembly monolayer technique. SWNTs were cut into sub-micron lengths by sonication in an acidic solution. Cut SWNTs were attached to the gold surface by the reaction between the thiol groups and the gold surface. The field-emission measurements showed that the turn-on field was 4.8 V/μm at an emission current density of 10 μA/cm². The current density was 0.5 mA/cm² at 6.6 V/μm. This approach provides a novel route for fabricating CNT-based field-emission displays. Received: 3 May 2002 / Accepted: 6 May 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +82-54/279-8298, E-mail: ce20047@postech.ac.kr     

Hydrogen adsorption on activated carbon nanotubes with an atomic-sized vanadium catalyst investigated by electrical resistance measurements

Activated multi-walled carbon nanotubes were prepared with appended vanadium as a hydrogen storage medium. The pore structure was significantly improved by an activation process that was studied using Raman spectroscopy, field emission transmission electron microscopy and pore analysis techniques. X-ray photoelectron spectroscopy and X-ray diffraction results reveal that the vanadium catalyst was introduced into the carbon nanotubes in controlled proportions, forming V₈C₇. The improved pore structure functioned as a path through the carbon nanotubes that encouraged hydrogen molecule adsorption, and the introduced vanadium catalyst led to high levels of hydrogen storage through the dissociation of hydrogen molecules via the spill-over phenomenon. The hydrogen storage behavior was investigated by electrical resistance measurements for the hydrogen adsorbed on a prepared sample. The proposed mechanism of hydrogen storage suggests that the vanadium catalyst increases not only the amount of hydrogen that is stored but also the speed at which it is stored. A hydrogen storage capacity of 2.26 wt.% was achieved with the activation effects and the vanadium catalyst at 30 °C and 10 MPa.     

Hydrogen storage using carbon adsorbents: past, present and future

Interest in hydrogen as a fuel has grown dramatically since 1990, and many advances in hydrogen production and utilization technologies have been made. However, hydrogen storage technologies must be significantly advanced if a hydrogen based energy system, particularly in the transportation sector, is to be established. Hydrogen can be made available on-board vehicles in containers of compressed or liquefied H₂, in metal hydrides, via chemical storage or by gas-on-solid adsorption. Although each method possesses desirable characteristics, no approach satisfies all of the efficiency, size, weight, cost and safety requirements for transportation or utility use. Gas-on-solid adsorption is an inherently safe and potentially high energy density hydrogen storage method that could be extremely energy efficient. Consequently, the hydrogen storage properties of high surface area “activated” carbons have been extensively studied. However, activated carbons are ineffective in storing hydrogen because only a small fraction of the pores in the typically wide pore-size distribution are small enough to interact strongly with hydrogen molecules at room temperatures and moderate pressures. Recently, many new carbon nanostructured absorbents have been produced including graphite nanofibers and carbon multi-wall and single-wall nanotubes. The following review provides a brief history of the hydrogen adsorption studies on activated carbons and comments on the recent experimental and theoretical investigations of the hydrogen adsorption properties of the new nanostructured carbon materials. Received: 16 October 2000 / Accepted: 15 November 2000 / Published online: 9 February 2001     

Storage of hydrogen on single-walled carbon nanotubes and other carbon structures

The sorption of hydrogen on carbon structures and nanostructures offers a way to reduce the storage pressure of hydrogen with respect to compression storage while achieving interesting gravimetric storage densities. The most readily available carbon structures, activated carbons, can achieve reproducible, high gravimetric storage densities under cryogenic operating conditions: 5–6% at 35 bar and 77 K, in excess of the normal density that would be present in the pore volume under compression at the same temperature and pressure. We discuss and compare the adsorption of hydrogen on high specific surface activated carbons, nanofibres and nanotubes from experimental and theoretical considerations. In particular, we present gravimetric and volumetric hydrogen sorption measurements on single-walled carbon nanotubes (SWNTs) at (1 bar, 77 K) and (1 bar, 295 K) within the context of our ongoing work on the storage of hydrogen on activated carbon and carbon nanostructures. BET surface area and XRD characterization results on SWNTs are also presented. The experiments were performed on as received, chemically treated and metal-incorporated SWNT samples. Hydrogen sorption capacities measured on treated samples ranged from 0 to about 1 wt.% at 1 bar and 295 K and reached about 4 wt.% at 1 bar and 77 K. Our results show that under certain conditions, SWNTs have better hydrogen uptake performance than large surface area activated carbons. PACS 81.07.de; 81.05.Uw; 68.43.h     

Hydrogen adsorption in microporous alkali-doped carbons (activated carbon and single wall nanotubes)

Adsorption of hydrogen gas was tested in microporous doped carbons: activated carbon (1600 m²/g) and single wall carbon nanotubes (SWNTs). The isotherms of adsorption of LiC₁₈ and KC₂₄ doped microporous activated carbons were determined in the range [0–30 bar] at room temperature and 77 K. The chemisorption ratio observed at room temperature increases with increasing the alkali/carbon rate. The isotherm profiles of doped activated carbon at 77 K show no clear enhancement of the sorption ratio compared to the raw activated carbon.The adsorption sites of potassium doped SWNTs with closed end were determined by neutron diffraction experiment using deuterium gas. The K-doped SWNTs were found only slightly intercalated by K ions so that empty cavities are preserved in between the tubes. At room temperature, the chemisorption of deuterium was not observed in doped SWNTs bundles, but only in the KC₈ graphite intercalation compound impurities. At low temperature, the isotherms analysis and neutron diffraction experiments have shown that D₂ molecules are physisorbed in the free interstitial voids in between the tubes within the bundles.     

Review of theoretical calculations of hydrogen storage in carbon-based materials

In this paper we review the existing theoretical literature on hydrogen storage in single-walled nanotubes and carbon nanofibers. The reported calculations indicate a hydrogen uptake smaller than some of the more optimistic experimental results. Furthermore the calculations suggest that a variety of complex chemical processes could accompany hydrogen storage and release. Received: 24 August 2000 / Accepted: 15 November 2000 / Published online: 9 February 2001     

Standing or lying C70s encapsulated in carbon nanotubes with different diameters

Single-walled carbon nanotubes (SWNTs) encapsulating C₇₀s, so-called C₇₀ peapods, were synthesized in high yield by a vapor-phase doping method. Raman spectra, high resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED) measurement indicate that the tube diameter is one of the important factors to determine the orientation of C₇₀ molecules inside the SWNTs. SWNTs with different diameters give different alignment of C₇₀ molecules. The lying orientation is favorable over the standing orientation in thin nanotube, i.e. 1.36 nm nanotubes, whereas the standing orientation is favorable in thick nanotubes, i.e. 1.49 and 1.61 nm nanotubes.     

Optical properties of fullerene and non-fullerene peapods

Single-wall carbon nanotubes (SWNTs) encapsulating fullerenes, so-called fullerene peapods, were synthesized in high yield by using diameter-selected nanotubes as pods. Transmission electron microscopy revealed high-density fullerene chains inside the nanotubes. X-ray-diffraction measurements indicate 85% filling for C₆₀ and 72% filling for C₇₀ molecules as a total yield. Interestingly, C₆₀ peas do not show any thermal expansion while C₇₀ peas show normal behavior. Room-temperature Raman spectra show one-dimensional photopolymerization of C₆₀ inside nanotubes by blue-laser irradiation, suggesting molecular rotation inside them. In C₇₀ peapods, no photopolymerization was observed but the relative Raman intensity of each peak is different from the C₇₀ 3D crystal. This is probably caused by mixing of two different crystal structures in C₇₀ peas. Furthermore, we synthesized Zn-diphenylporphyrin peapods. Optical absorption and Raman spectra suggest that the encapsulated molecules are deformed by interaction with the SWNT. Received: 12 November 2001 / Accepted: 3 December 2001 / Published online: 4 March 2002     

Synthesis, integration, and electrical properties of individual single-walled carbon nanotubes

High-quality single-walled carbon nanotubes (SWNTs) are synthesized by chemical vapor deposition (CVD) of methane on silicon-dioxide substrates at controlled locations using patterned catalytic islands. With the synthesized nanotube chips, microfabrication techniques are used to reliably contact individual SWNTs and obtain low contact resistance. The combined chemical synthesis and microfabrication approaches enable systematic characterization of electron transport properties of a large number of individual SWNTs. Results of electrical properties of representative semiconducting and metallic SWNTs are presented. The lowest two-terminal resistance for individual metallic SWNTs (≈5 μm long) is ≈16.5 kΩ measured at 4.2 K. Received: 17 May 1999 / Accepted: 18 May 1999 / Published online: 14 July 1999     

Y-branching of single walled carbon nanotubes

Y-branching was observed by scanning tunnelling microscopy (STM) in single wall carbon nanotubes grown by thermal decomposition of C₆₀ fullerene in the presence of transition metals. These novel carbon nanostructures may play an important role in carbon-based nanoelectronics. Received: 18 November 1999 / Accepted: 20 January 2000 / Published online: 8 March 2000     

Growth of single-wall carbon nanotubes dependent on laser power density and ambient gas pressure during room-temperature CO2 laser vaporization

Single-wall carbon nanotubes (SWNTs) were synthesized by the irradiation of 20-ms CO₂ laser pulses onto a graphite–Co/Ni target at room temperature. We investigated the effect of laser power density (10–150 kW/cm²) and ambient Ar gas pressure (150–760 Torr) on the abundance of SWNTs with lengths of up to about 200 nm in soot-like carbonaceous deposits. For a constant power density (30 kW/cm²), depending on the Ar gas pressure, SWNTs with diameters of 1.2–1.4 nm were synthesized. Expansion behavior and temperature-fall rates of clusters and/or particles in laser plumes were also analyzed by high-speed video imaging and temporally and spatially resolved emission spectroscopy. The temperature-fall rates were estimated to be 171–427 K/ms. The SWNT growth on the time scale of a few milliseconds appeared to be related to some features of condensing clusters and/or particles, including resident densities, collision frequencies and temperatures. Received: 16 July 2001 / Accepted: 23 July 2001 / Published online: 30 August 2001     

Growth mechanisms for single-wall carbon nanotubes in a laser-ablation process

Mechanisms proposed in the literature are compared with a current scenario for the formation of single-wall carbon nanotubes in the laser-ablation process that is based on our spectral emission and laser-induced fluorescence measurements. It is suggested that the carbon which serves as feedstock for nanotube formation not only comes from the direct ablation of the target, but also from carbon particles suspended in the reaction zone. Fullerenes formed in the reaction zone may be photo-dissociated into C₂ and other low molecular weight species, and also may serve as feedstock for nanotube growth. Confinement of the nanotubes in the reaction zone within the laser beam allows the nanotubes to be ‘purified’ and annealed during the formation process by laser heating. Received: 2 November 2000 / Accepted: 3 November 2000 / Published online: 23 March 2001     

具有优异储氢性能的高质量单壁纳米碳管的合成

高纯度单壁纳米碳管的合成是应用研究和实际应用的基础和关键,提出了一种氢等离子电弧方法,在适当的生长促进剂的作用下,能大量制备出高纯度的单壁纳米碳管。选用宏观数量的单壁纳米碳管,进行适当预处理,在室温及约１００ａｔｍ下进行储氢实验,发现该材料的储氢容量可达（４．２－４．７）ｗｔ％,经过５次循环实验,其储氢容量先略有下降,随后便稳定不变,这些初步实验结果表明,单壁纳米碳管是一种很有前途的储氢材料。     

Computational analysis of effect of modification on the interfacial characteristics of a carbon nanotube-polyethylene composite system

In this study, the non-covalent association of single-walled nanotube (SWNT) with polyethylene (PE) molecule and the influence of sidewall modification on the interfacial bonding between the SWNTs and polymer were investigated using molecular mechanics (MM) and molecular dynamics (MD) simulations. The model of interaction between the initially separated PE and SWNT fragments, which can be either wrapping or filling, was computed. The possible extension of polymers wrapping or filling SWNTs can be used to structurally bridge the SWNTs and polymers to significantly improve the load transfer between them when SWNTs are used to produce nanocomposites. The interfacial bonding characteristics between the single-walled nanotubes, on which -COOH, -CONH₂, -C₆H₁₁, or -C₆H₅ groups have been chemically attached, and the polymer matrix were also investigated by performing pullout simulations. The results show that appropriate functionalization of nanotubes at low densities of functionalized carbon atoms drastically increase their interfacial bonding and shear stress between the nanotubes and the polymer matrix, where chemisorption with -C₆H₅ groups to as little as 5.0% of the nanotube carbon atoms increases the shear stress by about 1700%. Furthermore, this suggests the possibility to use functionalized nanotubes to effectively reinforce other kinds of polymer-based materials as well.     

Hydrogen storage in BC3 composite single-walled nanotube:a combined density functional theory and Monte Carlo investigation

This paper applies a density functional theory(DFT) and grand canonical Monte Carlo simulations(GCMC) to investigate the physisorptions of molecular hydrogen in single-walled BC 3 nanotubes and carbon nanotubes.The DFT calculations may provide useful information about the nature of hydrogen adsorption and physisorption energies in selected adsorption sites of these two nanotubes.Furthermore,the GCMC simulations can reproduce their storage capacity by calculating the weight percentage of the adsorbed molecular hydrogen under different conditions.The present results have shown that with both computational methods,the hydrogen storage capacity of BC 3 nanotubes is superior to that of carbon nanotubes.The reasons causing different behaviour of hydrogen storage in these two nanotubes are explained by using their contour plots of electron density and charge-density difference.     

Growth of single-walled carbon nanotubes from size-selected catalytic metal particles

Single-walled carbon nanotubes (SWNTs) were synthesized using size-controlled catalyst nanoparticles created by the pulsed laser ablation method. Specifically, the alloy particles (Co/Mo or Co/Pt) were prepared by ablation of the target alloy materials in an inert gas atmosphere. Size selection was performed using a differential mobility analyzer (DMA). The obtained nanoparticles were deposited on a quartz substrate from which SWNTs were grown by the alcohol catalytic CVD (ACCVD) technique that was developed by the authors group. AFM and Raman scattering analysis revealed that SWNTs were successfully synthesized. It seems the Co/Mo alloy catalyst was more effective for the synthesis of SWNTs than the Co/Pt catalyst, though this is a preliminary result to be further investigated. PACS 36.40.-c; 61.46.+w; 65.80.+n; 78.30.Na; 81.07.de     

Effect of purification on the electron structure and field emission characteristics of a carbonaceous material containing single-wall carbon nanotubes

A carbonaceous material containing single-wall carbon nanotubes (SWNTs) has been synthesized by arc-discharge evaporation of graphite with a catalytic additive of nickel and cobalt powders. The synthesized SWNTs were purified from an amorphous carbon component (soot) and the catalyst particles by boiling in nitric acid. A comparison of the X-ray fluorescence spectra measured before and after this treatment showed that acid etching significantly decreased the content of soot in the material. The material enriched with SWNTs is characterized by a reduced threshold for the appearance of the field emission current, which is explained by a decrease in the screening effect of soot. The current-voltage characteristics of SWNTs exhibit a hysteresis, which is suggested to be due to the adsorption of molecules and radicals on the surface and at the ends of carbon nanotubes.     

真空热处理碳纳米管的储氢性能研究

研究了真空热处理对多壁碳纳米管(MWNTs)电化学储氢性能的影响.采用化学气相沉积法(CVD)制备碳纳米管，碳纳米管与LaNi₅储氢合金按质量比1∶10混合，制作成CNTs-LaNi₅电极.电解池采用三电极体系，6mol/L KOH为电解液，Ni(OH)₂为正极，Hg/HgO为参比电极.实验结果表明，在相同的充放电条件下，850℃时CNTs-LaNi₅电极的储氢性能最好，克容量最大为503.6mAh/g，相应的平台电压高达1.18V.从500—850℃随着温度升高，放电量有较大幅度的增加，但到950℃时放电量反而下降.由此可见，碳纳米管的热处理温度对碳纳米管的电化学储氢性能有着较大的影响. 关键词： 碳纳米管(CNTs) 储氢性能 5合金')" href="#">LaNi₅合金 化学气相沉积法(CVD法)