微波消解样品-火焰原子吸收光谱法测定焦炭灰中钾、钠含量

0.100 0g焦炭灰样品经氢氟酸-硝酸(1+3)溶液8mL消解,用火焰原子吸收光谱法测定其中钾和钠的含量。钾和钠的质量浓度分别在4mg.L-1及2mg.L-1以内与其吸光度呈线性关系,检出限(3σ)分别为12μg.L-1及6μg.L-1。方法用于分析焦炭灰标准物质,测定值与认定值相符,钾和钠的相对标准偏差(n=11)依次在2.7%～3.8%和1.3%～3.1%之间。     

悬浮液进样原子吸收光谱法测定核桃粉中钙和镁

采用悬浮液进样技术,原子吸收光谱法测定核桃粉中钙和镁的含量.将核桃粉悬浮于琼脂胶体中制成悬浮液,直接喷入空气-乙炔火焰,用标准加入法测定,并将测定结果与灰化法测定结果进行了比较,经 t 检验,在显著性水平α=0.05 时两种方法无显著性差异,相对标准偏差小于4.5%,检出限分别为 0.11 mg·L-1和 0.045 mg·L-1.     

分光光度法与火焰原子吸收光谱法测定钢中硼的比较

提出了萃取-分光光度法和火焰原子吸收光谱法测定钢中硼的两种方法,比较了两者的线性范围、检出限、样品测定结果等.试验发现:分光光度法和火焰原子吸收光谱法在硼含量分别为0.11～3.2 mg·L-1和0.05～3.24 mg·L-1范围内时,吸光度与其质量浓度呈线性关系,检出限(3S/N)分别为0.033,0.036 mg·L-1.经检验,两种方法的测定结果之间无显著性差异.     

悬浮液进样-火焰原子吸收光谱法测定花粉中微量元素

提出了不使用稳定剂,直接用蒸馏水制成花粉样品的悬浮液进样,火焰原子吸收光谱法测定花粉中微量元素的方法.用三氯化镧和氯化铯消除干扰,在磁力搅拌下进样,应用标准加入法在同一溶液中用火焰原子吸收光谱法测定铜、铁、锰、锌、铅、镉、钙、镁、钾、钠等10种元素含量.方法的回收率在92.5%～112.5%之间,相对标准偏差(n=6)在0.24%～1.50%之间,并以高温灰化法的测定值为参考对测定结果进行F检验和t检验,发现两者无显著性差异,说明悬浮液进样法的测定结果准确可靠.     

瓶装饮用水中高氯酸盐含量的离子色谱-电导检测法和离子色谱-串联质谱法测定研究

建立了离子色谱-电导检测法(IC-CD)和离子色谱-串联质谱法(IC-MS/MS)测定瓶装饮用水中高氯酸盐浓度的方法,并对两种方法进行F检验(精密度)和t检验(系统误差).结果 表明,IC-CD的检出限为0.35 μg·L-1,定量限为1.17 μg·L-1,在0.5～8.0 μg·L-1范围内呈线性关系(R2 =0....     

微波消解样品-离子色谱法测定卷烟纸中钠、钾、镁、钙的含量

提出了离子色谱法同时测定卷烟纸中钠、钾、镁和钙含量的方法。卷烟纸试样经硝酸-过氧化氢-氢氟酸微波消解,以IonPac CS16阳离子交换柱为固定相,用0.027 mol.L-1甲烷磺酸溶液作流动相。钠、钾、镁和钙4种元素在30 min内可完全分离;各离子的检出限(3S/N)分别为13,15,8.1,97 mg.L-1。方法的加标回收率在100.9%～108.8%之间,测定值的相对标准偏差(n=5)在0.87%～3.4%之间。     

小波变换分光光度法同时测定复方芦丁片中芦丁和维生素C

建立了同时测定复方芦丁片中芦丁和维生素C含量的计算分光光度法--小波变换分光光度法.对芦丁和维生素C的重叠吸收光谱进行连续小波变换,分别提取只与芦丁和维生素C有关的特征小波变换系数,由特征小波变换系数值和浓度建立的线性回归方程,可以准确地测定复方芦丁片中芦丁和维生素C的含量.芦丁和维生素C的线性范围分别为0～25 mg·L-1和0～15 mg·L-1,对3个模拟试样作回收率和精密度试验,回收率在98.1%～102.0%之间,RSD值均小于等于0.9%.     

离子色谱法测定水果中亚硝酸盐和硝酸盐

建立了离子色谱法测定水果中亚硝酸盐和硝酸盐的方法.试样溶液中亚硝酸盐和硝酸盐在YSA-8阴离子色谱柱分离,以4 mmol.L-1碳酸钠-3 mmol.L-1碳酸氢钠为流动相,电导检测.亚硝酸盐和硝酸盐的检出限分别为0.02 mg·L-1和0.11 mg·L-1,工作曲线的线性范围分别在0.2～20.0 mg·L-1和0.3～30.0 mg·L-1范围内.该方法已应用于水果中亚硝酸盐和硝酸盐的测定,测得回收率在93.4%～105.2%之间.     

电感耦合等离子体原子发射光谱法测定柑橘中镧系元素含量

应用电感耦合等离子体发射光谱法同时测定柑橘中的5种稀土元素镧、铈、镨、钕和钐.对分析线选择、积分时问的选择、消解方法的选择、介质的影响等进行了试验.与干灰化法相比较,微波消解法处理样品所得结果的准确度和精密度更好.选择波长为333.749,418.660,390.844,415.608及359.260 nm 5条谱线依次作为测定镧、铈、镨、钕和钐的分析线,测得5种稀土元素的检出限(3s/k)依次为0.003 3,0.017 0,0.014 0,0.039 0及0.007 8 mg·L-1.应用此法测定了沙田柚中5种稀土元素的含量,回收率在96.8%～101.0%之间,相对标准偏差(n=5)小于5.5%.与GB/T 5009.94-2003法比较,经t检验,在置信水平α=0.05时,测定沙田柚时两种方法无显著性差异.     

K系数分光光度法同时测定钴矿中铜、钴、镍

探讨了在pH 8.00时,溴化十六烷基三甲基铵在存下,铜(Ⅱ)、钴(Ⅱ)和镍(Ⅱ)与二甲酚橙显色的反应条件.建立了K系数分光光度法同时测定钴矿中铜、钴、镍的分析方法.铜、钴、镍含量分别在0～800 μg·L-1,0～1.60 mg·L-1,0～1.20 mg·L-1范围内符合比耳定律.方法用于钴矿试样的分析,测得铜、钴、镍的相对标准偏差分别为3.5%,4.9%,3.4%,回收率分别为103.3%,92.6%,99.0%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.