Reactive polymeric nanoparticles based on unconventional dextran derivatives

Unconventional dextran derivatives with reactive tosyl- and deoxy-azido moieties were synthesized homogeneously under various reaction conditions. Well soluble tosyl dextran of a high degree of substitution up to 1.66 was prepared applying N,N-dimethylacetamide/LiCl as solvent. Almost 50% of secondary toslyate moieties could be replaced by nucleophilic displacement reaction with azide ions. The structure of the products was efficiently analyzed by NMR spectroscopy also after peracylation of the unconventional dextran derivatives. Applying a simple dialysis technique, nanospheres with a size in the range from 160 to 420 nm (D50%) were obtained that possess reactive functional tosyl- and deoxy-azido groups.     

Amphiphilic derivatives of dextran: adsorption at air/water and oil/water interfaces

Ionic amphiphilic dextran derivatives were synthesized by the attachment of sodium sulfopropyl and phenoxy groups on the native polysaccharide. A family of dextran derivatives was thus obtained with varying hydrophobic content and charge density in the polymer chains. The surface-active properties of polymers were studied at the air-water and dodecane-water interfaces using dynamic surface/interfacial tension measurements. The adsorption was shown to begin in a diffusion-limited regime at low polymer concentrations, that is to say, with the diffusion of macromolecules in the bulk solution. In contrast, at long times the interfacial adsorption is limited by interfacial phenomena: adsorption kinetics or transfer into the adsorbed layer. A semiempirical equation developed by Filippov was shown to correctly fit the experimental curves over the whole time range. The presence of ionic groups in the chains strongly lowers the adsorption kinetics. This effect can be interpreted by electrostatic interactions between the free molecules and the already adsorbed ones. The adsorption kinetics at air-water and oil-water interfaces are compared.     

Amphiphilic gold nanoparticles with V-shaped arms

Here we describe a very efficient method to produce well-defined amphiphilic gold nanoparticles (Au NPs) with an equal number of hydrophobic and hydrophilic arms which are distributed along the surface of a 2-nm gold core in an alternating fashion. The strategy involves direct coupling of V-shaped block copolymer amphiphile 2 with a carboxylic group at its junction point to mercaptophenol-terminated Au NPs. The reaction proceeds under mild esterification conditions and yields the product with a molecular weight of 40 kDa, high grafting density (2.9 chains/nm2), and extremely low polydispersity (1.07). The big advantage of this approach is the opportunity to avoid the use of expensive and often inaccessible polymeric thiols. The method described here is applicable to any carboxyl-terminated molecules and can be used for the preparation of complex, yet well-defined, macromolecular hybrid structures such as 1 (Au(PB-PEG)n). The new product, which was characterized by a combination of SEC, NMR, UV-vis, DLS, and TEM, represents a unique example of gold nanoparticles soluble in any conventional solvent.     

Amphiphilic polymethacrylate derivatives as antimicrobial agents

We have investigated the structure-activity relationship of cationic amphiphilic polymethacrylate derivatives in antimicrobial and hemolytic assays. The polymers were prepared by radical copolymerizations of N-(tert-butoxycarbonyl)aminoethyl methacrylate and butyl methacrylate in the presence of methyl 3-mercaptopropionate as a chain transfer agent to give precursor polymers protected with a tert-butoxycarbonyl (Boc) group. Subsequent treatment of the Boc-protected polymers with TFA affords the desired cationic random copolymers. We examined antimicrobial and hemolytic activities of a series of polymers having a wide range of mole percentage of butyl groups (0-60%) in three different molecular weight (MW) ranges. The smallest polymers (MW < 2000) showed the lowest MIC and reduced hemolytic activity compared to that of the higher MW ones. In addition, polymers containing a high percentage of butyl groups are less selective for bacterial cells than their less hydrophobic counterparts.     

Amphiphilic polyethylenes leading to surfactant-free thermoresponsive nanoparticles

Linear copolymers of ethylene and acrylic acid (PEAA) were prepared by catalytic polymerization of ethylene and tert-butyl acrylate followed by hydrolysis of the ester groups. The copolymers contained COOH groups inserted into the crystalline unit cell with formation of intramolecular hydrogen-bonds, as established on the basis of differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) studies. A solvent-exchange protocol, with no added surfactant, converted a solution in tetrahydrofuran of a PEAA sample containing 12 mol % of acrylic acid (AA) into a colloidally stable aqueous suspension of nanoparticles. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and high sensitivity differential scanning calorimetry (HS-DSC) were used to characterize the nanoparticles. They are single crystals of elongated shape with a polar radius of 49 nm (σ = 15 nm) and an equatorial radius of 9 nm (σ = 3 nm) stabilized in aqueous media via carboxylate groups located preferentially on the particle/water interface. The PEAA (AA: 12 mol %) nanoparticles dispersed in aqueous media exhibited a remarkable reversible thermoresponsive behavior upon heating/cooling from 25 to 80 °C.     

Dextran derivatives I. Synthesis of O-aminoacyl derivatives of dextran

Conclusions 1. A method for the O-aminoacylation of dextran (polyglucin) has been proposed.2. The synthesis of O-aminoacyl derivatives of dextran containing residues of glycine, -aminoenanthic acid and N-acetyl-L-histidine has been effected.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 5, pp. 427–432, 1969     

Biodegradable nanoparticles made from polylactide-grafted dextran copolymers

Polysaccharide-covered polyester nanoparticles were prepared using the emulsion/solvent evaporation process. The core of the nanoparticles was made either of PLA or of a blend of polylactide and polylactide-grafted dextran copolymer in various proportions. The surface of the nanoparticles was covered by dextran chains via the use of water-soluble polylactide-grafted dextrans as polymeric stabilizers during the emulsification step. The characteristics of the nanoparticles (size, surface coverage, thickness of superficial layer, colloidal stability) were correlated to the structural parameters (length and number of polylactide grafts) of the copolymers as well as to their surface active properties. The complete biodegradability of the nanoparticles was evaluated by considering the rate of hydrolysis of polylactide grafts in phosphate buffer and the rate of enzymatic degradation of dextran backbone by dextranase.     

Amphiphilic ESIPT benzoxazole derivatives as prospective fluorescent membrane probes

Fluorescent amphiphilic benzoxazole derivatives were synthesized and used to produce photoactive phosphatidylcholine (PC) liposomes by reserve-phase evaporation. The dyes absorbed in the UV region and were fluorescent in the blue-green region (determined by solvent polarity). The alkyl chain length seemed to play a fundamental role in the photophysics of the benzoxazole fluorophore in reverse liposomes, and despite the same ESIPT core and phospholipid building block, each amphiphilic dye had a particular emission profile related to the dye location in the liposome. The fluorescence emission spectra from dye 5 showed that its fluorophore experienced a polar environment, due to the single normal emission, while dyes 6–7 had (in part) a normal emission, and the main fluorescent band ascribed to the ESIPT emission indicated a more hydrophobic environment. Despite the complex fluorescent profiles, the benzoxazole derivatives could be successfully introduced into the reverse liposome structure due to the interaction between the alkyl chain and PC bilayer.     

Amphiphilic poly-n-vinyl-2-pyrrolidone: Synthesis,properties, nanoparticles

Water-soluble amphiphilic polymers based on N-vinyl-2-pyrrolidone (Amph-PVP) have been synthesized. Amphiphilic diblock polymers have been obtained via a single-step technique. For the synthesized amphiphilic polymers, the critical concentrations of mycelium formation (CCM) have been determined. The structure of the polymers obtained was confirmed by IR and NMR spectroscopy. The critical concentration of micelle formation (CCM) for the synthesized polymers has been found to be in the micromolar range. The fluorescent dye 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindocarbocyanine perchlorate (Dil) was chosen as a model substance for the synthesis of nanoparticles. Micellar particles were obtained via an ultrasonic technique followed by evaporation of the organic solvent (emulsion method).     

Amphiphilic silica nanoparticles as pseudostationary phase for capillary electrophoresis separation

Amphiphilic silica nanoparticles surface-functionalized by 3-aminopropyltriethoxysilane (APTES) and octyltriethoxylsilane (OTES) were successfully prepared and characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR) and thermogravimetry (TG) techniques. The potential use of these bifunctionalized nanoparticles as pseudostationary phases (PSPs) in capillary electrophoresis (CE) for the separation of charged and neutral compounds was evaluated in terms of their suitability. As expected, fast separation of representative aromatic acids was fulfilled with high separation efficiency, because they migrate in the same direction with the electroosmotic flow (EOF) under optimum experimental conditions. Using a buffer solution of 30mmol/L phosphate (pH 3.0) in the presence of 0.5mg/mL of the synthesized bifunctionalized nanoparticles, the investigated basic compounds were baseline-resolved with symmetrical peaks. Due to the existence of amino groups on the surface of nanoparticles, "silanol effect" that occurs between positively charged basic analytes and the silanols on the inner surface of capillary was greatly suppressed. Furthermore, the separation systems also exhibited reversed-phase (RP) behavior when neutral analytes were tested.     

Development of catalytically active silver colloid nanoparticles stabilized by dextran

Colloidal silver nanoparticles (Ag-NPs) with a mean diameter of 6.1 nm and a narrow size distribution were prepared by reduction of the correspondent metal salt with injection of NaBH(4), in the presence of dextran, and characterized by UV-vis, TEM, and DLS. The concentration of all reactants involved in the formation of the nanoparticles was optimized with the use of a new multivariate method, which revealed a significant reduction in the number of experiments when compared with the vast majority of univariate methods described in the literature. The Ag-NPs-dextran composite was able to efficiently catalyze the p-nitrophenol reduction in water by NaBH(4) with a rate constant normalized to the surface area of the nanoparticles per unit volume (k(1)) of 1.41 s(-1) m(-2) L, which is higher than values ever reported for Ag-NPs catalytic systems.     

Amphiphilic propane-l,2-diol derivatives incorporating calamitic structural units

Novel amphiphilic propane-1,2-diol derivatives incorporating a wide variety of calamitic structural units, like biphenyl, dicyclohexyl. phenylbemzoate, phenyl pyrimidine and phenylthiadiazole, were synthesized and their mesomorphic behaviour studied. Most of these compounds exhibit broad smectic A and C mesophases in the water-free state. These mesophases could be stabilized further by addition of water. The transition temperatures depend mainly on the hydrophilic properties of the rigid core and on the length of the spacer by which the core is connected to the diol unit.     

5'-methylaristeromycin and related derivatives

The biological versatility of aristeromycin (carbocyclic adenosine) is limited by accompanying cytotoxicity caused ostensibly by the intracellular formation of its 5'-nucleotide derivatives. Aristeromycin derivatives that offered steric interference to this transformation at the C-5' center were sought. This paper describes the facile stereospecific synthesis, where necessary, of such C-5'-methylated aristeromycin derivatives.     

Amphiphilic cholesteryl-bearing carboxymethylcellulose derivatives: self-assembly and rheological behaviour in aqueous solution

The self-assembly of amphiphilic cholesteryl-bearing carboxymethylcellulose derivatives (CCMCs) from individual molecules to self-aggregates, in addition to their rheological behaviour in aqueous solution were investigated. The conformations of the individual CCMC individual molecules and self-aggregates, and the microstructures of CCMC self-aggregates were characterized using the static and dynamic light scattering analyses, and the steady fluorescence technology. The results showed that the individual CCMC chains became compact, and aqueous NaCl solution changed from an approximate θ solvent to a bad one when the number of hydrophobic cholesteryl groups increased. The CCMC self-aggregates exhibited as compact spheres. The microstructural characterization indicated that one CCMC self-aggregate consisted of multiple individual CCMC molecules and hydrophobic microdomains, and multiple cholesteryl groups self-associated into one hydrophobic microdomain. The atomic force microscopy images of CCMC self-aggregates in phase mode showed that the multiple interior hydrophobic phase separation regions were surrounded by hydrophilic polysaccharide chains, providing an evidence for multiple hydrophobic microdomains in one self-aggregate. The rheological analysis proved that the CCMC self-aggregates were a microgel, in which the associations of cholesteryl groups provided multiple cross-linking points in the polymer network. The microgel solutions displayed a unique thixotropy and a shear thinning behaviour.     

Amphiphilic ionic liquid stabilizing palladium nanoparticles for highly efficient catalytic hydrogenation

The highly water-soluble palladium nanoparticles (NPs) were synthesized by using the amphiphilic poly(ethylene glycol)-functionalized dicationic imidazolium-based ionic liquid (C(12)Im-PEG IL) as a stabilizing agent. The aqueous dispersed palladium NPs in the range of 1.9 ± 0.3 nm were observed by transmission electron microscopy (TEM). The physicochemical properties of C(12)Im-PEG IL in aqueous phase have been characterized by electrical conductivity, surface tension and dynamic light scattering (DLS) measurements. It was demonstrated that the amphiphilic ionic liquid can form micelles above its critical micelle concentration (CMC) in aqueous solution and the micelles played a crucial role in stabilizing the palladium NPs and thus promoted catalytic hydrogenation. Furthermore, the dicationic ionic liquid can also act as a gemini surfactant and generated emulsion between hydrophobic substrates and the catalytic aqueous phase during the reaction. The aqueous dispersed palladium NPs showed efficient activity for the catalytic hydrogenation of various substrates under very mild conditions and the stabilizing Pd(0) nanoparticles (NPs) can be reused at least eight times with complete conservation of activity.     

Preparation of dextran immunological magnetic nanoparticles and their application to combined targeting carrier

Superparamagnetic dextran nanoparticles were prepared by coprecipitation. Effects of concentration of dextran, amount of ironic salts, stirring speed, concentration of ammonium hydroxide and mole ratio of Fe3+/Fe2+ on the effective diameter of dextran magnetic nanopartides (DMNP) were studied. Dextran immunological magnetic nanoparticles (DIMNP) were formed by the reaction of the monoclonal anti-human mammary cancer antibody with DMNP oxidized by sodium periodate, and the properties of magnetic susceptibility, shape and retention of antibody activity were investigated. The in vitro cancer antigen binding ability of DIMNP was demonstrated by radioimmunoassay, and the in vivo magnetic localization and antibody targeting ability of radiolabeled DIMNP were studied.     

Amphiphilic silica nanoparticles at the decane-water interface: insights from atomistic simulations

The properties of 3 nm-diameter silica nanoparticles with different surface chemistry were systematically investigated at the decane-water interface using molecular dynamics simulations. Our results show that the decane-water interfacial tension is not much influenced by the presence of the nanoparticles. The three-phase contact angle increases with nanoparticle surface hydrophobicity. Contact angles observed for the nanoparticles at 300 and at 350 K differ very little. The contact angle of the nanoparticle with randomly dispersed hydrophobic groups is smaller than that observed in Janus nanoparticles of equal overall surface chemistry composition. The energy necessary to desorb Janus nanoparticles from the interface is usually higher than that required to desorb the corresponding homogeneous nanoparticles. Desorption from the interface into the aqueous phase is preferred over that into the organic phase for all except one of the nanoparticles considered. Structural and dynamic properties including nanoparticle rotational relaxation, solvent density profiles, and solvent residence autocorrelation functions near the nanoparticles are also presented. The data are useful for designing Pickering emulsions.