Biodegradable poly(sebacic anhydride-co-caprolactone) multi-block copolymers: Synthesis, characterization, crystallinity and crystalline morphology

Biodegradable poly(sebacic anhydride-co-caprolactone) (PSA-co-PCL) multi-block copolymers were prepared by condensation of acylated PSA and PCL prepolymers with different weight ratios. The homopolymer and copolymers were characterized by ¹H-NMR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC) and atom force microscope (AFM). ¹H-NMR and GPC has indicated the formation of PSA-co-PCL multi-block copolymers, in which PSA and PCL segments are randomly distributed. The incorporation of PCL segments into the molecule chains even at a content of 20 wt% could significantly decrease the molecular weight distribution of the copolymer and increase its weight average molecular weight, as compared with PSA homopolymer. DSC has revealed that the melting temperature and degree of crystallinity for both SA and CL components are strongly composition dependent, implying the hindrance effect of the two components on crystallinity of each other. AFM observation has shown the difference in crystalline structures between PSA and PCL phases in the copolymers. In-vitro degradation tests performed at 37 °C in PBS buffer solution (pH 7.4, 0.1 M) have demonstrated the acceleration of degradation rate of the sample with increasing SA content in the copolymer.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Study of crystallinity and thermomechanical analysis of annealed poly(ethylene terephthalate) films

The objective of this article was the determination of the degree of crystallinity of a series of heat-set poly(ethylene terephthalate) (PET) films and their study by thermomechanical analysis (TMA) in order to elucidate a peculiar behaviour that takes place around the glass transition region. For this purpose, amorphous cast Mylar films from DuPont were annealed at 115 °C for various periods of time. Four methods were used to study the crystallinity of the samples prepared: differential scanning calorimetry (DSC), density measurements (DM), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared spectroscopy (FT-IR). From the results obtained, the following conclusions are drawn: amorphous PET Mylar films can be crystallized in a degree of about up to 30% after thermal treatment for 30 min (cold crystallization) above glass transition temperature. When these semicrystalline samples are subjected to TMA, they show a two step penetration of the probe into them, which decreases with the increase of the degree of crystallinity. The first step of penetration was attributed to the shrinkage of the amorphous or semicrystalline sample, which takes place on the glass transition temperature, while the second step was attributed to the continuous softening of the sample, and the reorganization of the matter which takes place on heating run due to cold crystallization.     

Complement activation by sulfonated poly(ethylene glycol)-acrylate copolymers through alternative pathway

Previously, novel poly(ethylene glycol) (PEG) and sulfonated PEG acrylate (PEG-SO₃A/OA) copolymers were prepared as coating and/or blending materials for biomedical applications. Surfaces modified with copolymers exhibited increased anti-coagulation properties and decreased plasma adsorption level due to increased hydrophilic properties and reorientation characteristics of PEG/PEG-SO₃A chains in water phase. As continuation study, anti-complement effects of PEG-SO₃/OA copolymers were investigated in vitro, and compared with those of low-density polyethylene (LDPE) and PEG/OA. C3 activation by PEG-SO₃/OA samples was lower than that by PEG/OA samples, which was attributed to decreased surface nucleophile level of samples. PEG-SO₃/OA samples increased inhibition of Bb production, resulting in decreased C5 activation. Owing to reduced activations of C3 and C5, PEG-SO₃/OA samples markedly decreased SC5b-9 levels in plasma.     

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride) (PVDF)/poly(methylmethacrylate) (PMMA)/poly(styrene-<Emphasis Type="Italic">co</Emphasis>-acrylonitrile) (SAN) ternary blends

Compatibilization of the partially miscible poly(vinylidene fluoride) (PVDF)/poly(styrene-co-acrylonitrile) (SAN) pair by a third homopolymer, i.e., poly(methyl methacrylate) (PMMA), was investigated in relation to cross section morphology, crystallization behaviors and hydrophilicity of the polyblends. Scanning electron microscopy showed a more regular and homogeneous morphology when more than 15 wt.% PMMA was incorporated. The samples presented only α phase regardless of PMMA content in the blend. As the PMMA content increased in the blends, the interactions between each component were enhanced, and the crystallization of PVDF was limited, leading to a decreasing of the crystallinity and the crystallite thickness. Besides, the hydrophilicity of PVDF was further improved by PMMA addition. The sample containing 15 wt.% PMMA showed a more hydrophilic property due to the more polar part of surface tension induced by PMMA addition. Observed from the cross section of the blends, the miscibility of partially miscible PVDF/SAN blends were efficiently improved by PMMA incorporation.     

Interpolymer complexation and thermal behaviour of poly(styrene-co-maleic acid)/poly(vinyl pyrrolidone) mixtures

Polymer complexation between poly(styrene-co-maleic acid), (SMA28) and (SMA50) containing 28 and 50 mol% of maleic acid and poly(vinyl pyrrolidone) (PVP), has been investigated by differential scanning calorimeter (DSC), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). All results showed that the ideal complex composition of SMA28/PVP and SMA50/PVP leads, respectively, to 2:1 and 1:1 mole ratio of interacting components.For the investigated systems, the T_g versus composition curve does not follow any of the usual proposed models for polymer blends. Withal, a new model proposed by Cowie et al. is used to fit the T_g data and it is found to reproduce the experimental results more closely. According to n and q obtained values, it seems reasonable to conclude that the inter-associated hydrogen bonds dominate in SMA28/PVP (2:1) complexes. This effect is corroborated by the FTIR study as evidenced by the high displacement of the specific bands and ionic interactions have been clearly identified. Finally, a thermogravimetric study shows that ionic interactions increase the thermal stability of these complexes.     

Thermogravimetric study of some crosslinked copolymers based on poly(acrylonitrile-co-divinylbenzene)

Copolymer networks based on acrylonitrile (AN)/divinylbenzene (DVB) have been investigated by thermogravimetric analysis (TG) to evaluate their thermal stability in nitrogen atmosphere. Thermal stability was determined from TG-DTG curves to investigate the influence of AN and DVB in the synthesis of copolymers on the copolymer thermal properties. The TG and DTG curves of copolymers clearly show two thermodegradation stages. The solid residues produced after thermodegradation stages were analyzed by FTIR and elemental analysis (CHN). The decomposition temperatures were dependent on amount of AN and DVB used as the crosslinking agent. The degradation temperatures of copolymers were influenced by the diluent system during their synthesis. FTIR analyses indicate that the cyclization of the polymer proceeds before any mass loss.     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Investigation of swelling and network parameters of poly(ethylene glycol)-crosslinked poly(methyl vinyl ether-co-maleic acid) hydrogels

The influence of poly(ethylene glycol) (PEG) plasticiser content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) was investigated using thermal analysis, swelling studies, scanning electron microscopy (SEM) and attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. FTIR spectroscopy revealed a shift of the CO peak from 1708 to 1731 cm⁻¹, indicating that an esterification reaction had occurred upon heating, thus producing crosslinked films. Higher molecular weight PEGs (10,000 and 1000 Da, respectively), having greater chain length, producing hydrogel networks with lower crosslink densities and higher average molecular weight between two consecutive crosslinks. Accordingly, such materials exhibited higher swelling rates. Hydrogels crosslinked with a low molecular weight PEG (PEG 200) showed rigid networks with high crosslink densities and, therefore, lower swelling rates. Polymer:plasticizer ratio alteration did not yield any discernable patterns, regardless of the method of analysis. The polymer-water interaction parameter (χ) increased with increases in the crosslink density. SEM studies showed that porosity of the crosslinked films increased with increasing PEG MW, confirming what had been observed with swelling studies and thermal analysis, that the crosslink density must be decreased as the M_w of the crosslinker is increased. Hydrogels containing PMVE/MA/PEG 10,000 could be used for rapid delivery of drug, due to their low crosslink density. Moderately crosslinked PMVE/MA/PEG 1000 hydrogels or highly crosslinked PMVE/MA/PEG 200 systems could then be used in controlling the drug delivery rates. We are currently evaluating these systems, both alone and in combination, for use in sustained release drug delivery devices.     

New poly(amide-imide) siloxane copolymers by polycondensation

Some new poly(amide-imide) siloxane copolymers have been synthesized by solution polycondensation of some aromatic diamines with siloxanic diacids having preformed imide rings. Two polycondensation techniques were used: polycondensation of aromatic diamines with diacid chlorides and direct polycondensation of aromatic diamines with diacids in the presence of organic phosphites, following the Yamazaki-Higashi phosphorylation technique. In all cases the reactions were carried out using equimolecular amounts of the two monomers, in polar aprotic solvents and inert atmosphere.The obtained compounds were characterized by elemental C, H and Si analysis, solubility tests, IR and ¹H-NMR spectrometry. Thermogravimetric curves were also recorded. All data agree with the proposed structures.     

Synthesis and characterization of poly(vinylpyrrolidone-co-vinylphosphonic acid) copolymers

Radical copolymerizations of 1-vinyl-2-pyrrolidone (VP) with vinylphosphonic acid (VPA) at different feed ratios were investigated. The copolymers were characterized by ¹H-NMR, ¹³C-NMR and FT-IR. The copolymer composition was determined from the elemental analysis. Thermogravimetric analysis (TG) illustrates that the copolymers are stable up to 200 °C. Temperature dependence of the alternating current (AC) conductivities were investigated by means of impedance spectroscopy. The direct current (DC) conductivities of the samples are derived from the AC conductivity data.     

Loading efficiency and surface conductance of heparin-modified poly(lactide-co-glycolide) nanoparticles

Poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) with surface modification of heparin were fabricated by microemulsion–diffusion method. These novel colloidal particles were stabilized by lecithin and Tween 80. The effects of lecithin on the loading of heparin onto PLGA NPs and on the surface conductance were analyzed. The electronic micrographs revealed that spherical colloids were prepared and the incorporation of heparin caused a slight coalescence of the particles. In addition, the average diameter of heparin-modified PLGA NPs was between 70 and 220 nm. An increase in the weight percentage of lecithin or in the concentration of heparin enlarged the average diameter. Based on constant amount of surfactants, the loading efficiency of heparin on the particle surfaces reached a maximum when the weight percentage of lecithin was 50%. Moreover, the surface conductance of heparin-modified PLGA NPs was improved by an increased weight percentage of lecithin. A high concentration of heparin in microemulsion also promoted the loading efficiency and surface conductance of heparin-modified PLGA NPs.     

Polycaprolactone–poly(ethylene glycol) block copolymer,I: synthesis and degradability in vitro

A new type of biodegradable polymer material, poly(caprolactone)–poly(ethylene glycol) block copolymer (PCL-b-PEG), was synthesized by means of direct copolycondensation of ε-caprolactone with poly(ethylene glycol) in the presence of a Ti(OBu)₄ catalyst. The degradability of the polycaprolactone was improved by introducing a PEG component into it. The degradation of PCL-b-PEG copolymer increase with a decreasing crystallinity of the copolymer, and can be controlled by adjusting the component ratio of the copolymer.     

Surface bio-modification of poly(hydroxybutyrate-co-hydroxyhexanoate) and its aging effect

In this work, poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) film was fabricated by a solution-casting method and subsequently was modified by NaOH treatment to improve the surface hydrophilic property. Surface properties including hydrophilicity, surface appearance and functional groups were characterized by water contact angle measurement, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results showed the hydrophilicity of PHBHHx film was obviously improved by the NaOH treatment due to the topography changes promoted by the NaOH-etching and the introduction of polar groups included hydroxyl and carboxyl on the topmost surface layers. However, the modified film exhibited an aging effect: the hydrophilicity decreases with time elapsed during storage. It was found that the aging rate was strongly dependent on the crystallinity of the film and the storage environment. The sample with high-crystallinity lost hydrophilic property slower than that with low-crystallinity. Hydrophilic and low-temperature environment also prevented the modified PHBHHx from fast losing of the hydrophilicity.     

Synthesis and characterization of biodegradable poly(?-caprolactone-co-β-butyrolactone)-based polyurethane

Poly(?-caprolactone-co-β-butyrolactone) (PCLBL)-based polyurethane (PCLBL-PU) was synthesized and its tensile properties and hydrolytic degradability were investigated in an attempt to improve the degradability of poly(?-caprolactone)-based polyurethane (PCL-PU). PCLBL was synthesized by the ring-opening polymerization of ?-caprolactone (CL) and β-butyrolactone (BL) with stannous octoate as a catalyst. The introduction of a small amount of BL units significantly decreased the crystallinity of PCLBL. The crystallinity of the soft segment of PCLBL-PU also decreased with increasing BL content, and thus its hydrolytic degradation rate was dramatically increased. PCLBL-PU polymerized with PCLBL containing 5.7 mol% of BL units showed very similar tensile properties to PCL-PU, but its hydrolytic degradation rate increased by 100% at 45 °C.     

Miscibility and crystallinity of poly(3-hydroxybutyrate)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends

With the objective of developing new biodegradable materials, the miscibility and the crystallinity of blends of poly(3-hydroxybutyrate), P(3HB), and poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3HB-co-3HV), have been studied. P(3HB) (300 kg mol⁻¹)/P(3HB-co-3HV)–10% 3HV (340 kg mol⁻¹) blends were prepared by casting in a wide range of proportions, and characterized by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). The experimental values for the glass transition temperatures (T_g) are in good agreement with the values provided by the Fox equation, showing that the blends are miscible. It was observed that the T_g and the melting temperature (T_m) decreases with the increase in the P(3HB-co-3HV)–10% 3HV content, while the crystallization temperature (T_c) increases. FT-IR analyses confirmed the decrease on the crystallinity of P(3HB)/P(3HB-co-3HV)–10% 3HV blends with higher copolymer contents. Bands related to the crystallinity were changed, due to the copolymer content that produced miscible and less crystalline blends.     

Swelling studies of crosslinked poly(p-phenylene terephthalamide) copolymers in sulfuric acid

In an attempt to improve the mechanical properties of extended chain polymers such as poly(p-phenylene terephthalamide) (PPTA), a crosslinkable terephthalic acid derivative (XTA) has been developed which can be incorporated into copolymers in various concentrations and activated after polymerization. The crosslinking of PPTA-co-XTA copolymer particles was investigated through a series of swelling experiments in concentrated H₂SO₄. The data show a systematic decrease in equilibrium swelling with increasing XTA content, indicating the XTA units are in fact acting as crosslink sites. Values for crosslink density were calculated from the Flory-Rehner theory of polymer swelling and compared with previous findings on crosslinked rigid polymer network systems. The effective number of crosslinks per XTA unit (efficiency) predicted by the Flory-Rehner theory increases and then decreases with % XTA. The decrease in crosslinking efficiency at high XTA concentrations is consistent with differential scanning calorimetry data which show the enthalpy of XTA reaction decreasing slightly with % XTA. The deviations at low % XTA may represent a failure of the Flory-Rehner theory to properly describe the rubbery elasticity of extended chain polymers. © 1994 John Wiley & Sons, Inc.     

Controlling the size of poly(hydroxybutyrate-co-hydroxyvalerate) nanoparticles prepared by emulsification–diffusion technique using ethanol as surface agent

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) nanospheres and oily nanocapsules were prepared by emulsification–diffusion technique. Controlled particle sizes were obtained employing binary mixtures of solvents (chloroform:ethanol) in the organic phase. Ethanol was chosen because of its dipole–dipole interaction with chloroform and its hydrogen bond with water. The smallest particles (from 253 to 493 nm) were obtained using a mixture of solvents composed of 70% ethanol and 30% chloroform (v/v) in the organic phase, while the largest particles (from 896 to 1568 nm) were obtained using chloroform exclusively. Independently of the organic phase composition, the nanoparticles showed unimodal distributions. Optical microscopy showed that the size of the primary emulsion droplets of the nanosphere formulations decreased with increasing ethanol concentrations in the organic phase. A simple empirical equation was developed correlating the nanoparticle diameters with the surface tension gradient coefficient multiplied by the ethanol molar concentration in the organic phase. The strategy showed that the control of the nanoparticle diameters, using emulsification–diffusion technique, could be achieved by adjusting the surface tension of the organic phase.     

Synthesis and hydrolytic degradation of poly(ethylene succinate) and poly(ethylene terephthalate) copolymers

The conditions of synthesis of statistical poly(ethylene succinate-co-terephthalate) copolymers (2GTS) and high molecular weight poly(ethylene succinate) (PES) with good hydrolytic and optical parameters, designed for the production of biodegradable products and resins, are presented in this article. Copolymers were prepared by melt polycondensation of bis-(β-hydroxyethylene terephthalate) (BHET) and succinic acid (SA) with excess of ethylene glycol (2G) in the presence of a novel titanium/silicate catalyst (C-94) and catalytic grade of germanium dioxide (GeO₂) as cocatalyst. The chemical structure and physical properties of those materials were characterized by ¹H NMR, FT-IR, dynamical-mechanical thermal analyses (DMTA), differential scanning calorimetry (DSC), solution viscosity and spectroscopic methods. The hydrolytic degradation was performed in a water solution with variable pH, also in garden soil and in compost. The highest hydrolytic degradation rate was observed for pH 4 and for compost. Better hydrolytic degradation values in compost medium were observed for copolyester prepared in the presence of GeO₂ as polycondensation cocatalyst. The copolyester with 40 mol% of aliphatic units was chosen for industrial syntheses which were performed in ELANA and subsequently the processing parameters and compatibility with potato starch of this polyester were checked by BIOP Biopolymer Technologies AG.     

Crystallization behavior and biodegradation of poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers

Block copolymerization by using isocyanates is an effective method for incorporating PHB and PEG because it can prepare copolymers with good properties, such as toughness, strength, and so on. In this study, we adopted soil suspension system to estimate the biodegradability of a series of PHB/PEG multiblock copolymers with different compositions and block lengths. In the degradation process, the changes in weight loss, molecular weight, and tensile strength were periodically measured to determine the biodegradability, and the surface morphology was also observed by SEM. In contrast to pure PHB, the weight loss of the copolymer was relatively lower. On the other hand, the tensile strength and molecular weight experienced apparent decrease, and for BHG1000-3-1, they reached 46.7% and 77.7% of the initial value, respectively. SEM observation showed that the surface was covered with numerous erosion pits. All these indicate that the degradation indeed took place and long-chain molecules have been hydrolyzed into shorter ones. The crystallization behavior was also investigated by DSC and WAXD. The results showed that both the segments, PEG and PHB, can form crystalline phases at lower PHB contents ranging from 29% to 44%, and when PHB component was more than 60%, only PHB phase can crystallize.