Lamellar model of the left-handed metamaterials composed of metallic split-ring resonators and wires

Left-handed materials composed of split ring resonators (SRRs) and wires are investigated in the viewpoint of lamellar composite with epsilon-negative (ENG) and mu-negative (MNG) materials staked alternatively. Several configurations of the SRR-wire metamaterial are numerically simulated to confirm its left-handed response as an analogy to the ENG-MNG lamellar model.     

Negative magnetic permeability in the visible light region

Negative magnetic permeability of single split-ring resonators (SSRRs) is theoretically investigated in the visible light region. To describe the conduction characteristics of metal in the visible range, we develop the internal impedance formula completely. In our calculations, we determine the magnetic responses of the SSRR accurately. Based on our investigations, we also demonstrate the negative mu of the silver SSRR array in the visible light region.     

Design of Highly Sensitive Surface Plasmon Resonance Sensors Using Planar Metallic Films Closely Coupled to Nanogratings

We investigate the sensitivity enhancement of surface plasmon resonance （SPR） sensors using planar metallic films closely coupled to nanogratings. The strong coupling between localized surface plasmon resonances （LSPRs） presenting in metallic nanostructures and surface plasmon polaritons （SPPs） propagating at the metallic film surface leads to changes of resonance reflection properties, resulting in enhanced sensitivity of SPR sensors. The effects of thickness of the metallic films, grating period and metal materials on the refractive index sensitivity of the device are investigated. The refractive index sensitivity of nanograting-based SPR sensors is predicted to be about 543 nm/RIU （refractive index unit） using optimized structure parameters. Our study on SPR sensors using planar metallic films closely coupled to nanogratings demonstrates the potential for significant improvement in refractive index sensitivity.     

High-Sensitivity Sensor Based on Surface Plasmon Resonance Enhanced Lateral Optical Beam Displacements

We present a new optical sensor based on surface plasmon resonance （SPIt） enhanced lateral optical beam displacements. Compared with the traditional SPIt methods, the new method provides higher sensitivity to the sensor system. Theoretical simulations show that the refractive index （RI） detection sensitivity of the SPR sensor based on the displacement measurement has a strong dependence on the thickness of the metal film. When the optimal thickness of the metal film is selected, the RI resolutlon of the SPIt sensor is predicted to be 2.2 × 10^-7 refractive index units （RIU）. Furthermore, it is found that the incidence angle can be used as a parameter to adjust the operating range of the sensor to different refractive index ranges.     

Does negative refraction make a perfect lens?

A discussion of a question, studied earlier by Veselago in 1967 and by Pendry in 2000, is given. The question is: can a slab of the material with negative refraction make a perfect lens? Pendry's conclusion was: yes, it can. Our conclusion is: no, in practice it cannot, because of the fluctuations of the refraction coefficient of the slab. Resolution ability of linear isoplanatic optical instruments is discussed.     

Dielectric Properties of GaN in THz Frequencies

The complex refractive indices and the dielectric function of GaN for frequencies ranging from 0.25 to 1.22THz are obtained using THz time-domain spectroscopy. The real part of the dielectric function first decreases from 0.25 to 0.42THz and then oscillates from 0.42 to 1.22THz, whereas the imaginary part of the dielectric function is oscillating within the whole range of frequency. The simple Drude model is extended to take into account the effect of defects on the dielectric function. The extended model is in agreement with the experimental data.     

Correlation of the left- and the right-handed circularly polarized waves in an anisotropic crystal

An optical torque is induced by incidence of the linearly polarized light and propagating through an anisotropic crystal, which results in self-modulation of the ordinary and the extraordinary waves and causes an energy splitting of the resultant left-, and the right-handed elliptically polarized waves. The optical torque originates from the angular momentum of light, which causes the correlation of the left- and the right-handed circularly polarized waves in the crystal.     

Entanglement of the l- and the r-photons in an anisotropic crystal

Light incident onto an anisotropic crystal is divided into the ordinary and the extraordinary waves which vibrate in two perpendicular directions. Because of the tensor property of the dielectric constant, the direction of the electric displacement is not parallel to the vector of the incident electric field. An optical torque is induced by incidence of the linearly polarized light and propagating through the crystal. The optical torque tends to rotate the directions of eigenvibration which results in self-modulation of the ordinary and the extraordinary waves, and causes an energy splitting of the left (l)-, and the right (r)-handed circularly polarized waves in the crystal. The l- and the r-photons are correlated through the optical torque, which are found to be in an entanglement state.     

Enhancement of the far-field output power and the properties of the very-small-aperture lasers

We report on a VSAL structure fabricated by a 650 nm edge emitting laser diode with an Au-coated facet and an aperture size of 250 × 500 nm. The far field output power can maintain at 1 mW and the power density is 7.5 mW/μm². Some properties of the VSAL including the threshold current change, the red-shift of the spectral position, and the strong relative-intensity-noise are presented. The physical mechanisms responsible for these phenomena are also discussed, which may contribute to the understanding and application of the potential device for near-field optics.     

Absolute band gap properties in two-dimensional photonic crystals composed of air rings in anisotropic tellurium background

We analyze the band gap spectra of two-dimensional photonic crystals created by square, triangular and honeycomb lattices of air rings with different geometrical shapes and orientations in anisotropic tellurium background. Specifically, five different shapes of rings (circular, hexagonal, elliptical, rectangular and square) are considered. Using the numerical plane wave method, we discuss the maximization of the absolute photonic band gap width as a function of air ring parameters with different shapes and orientations in three types of lattices.     

Broad band beam splitter based on the double-groove fused silica grating

In this paper, we propose a broad band 1 × 3 beam splitter operating in the telecommunication wavelength band under normal incidence, this device consisting of a double-groove fused silica grating layer is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents excellent beam splitter ability for TE polarization light with the average diffraction efficiencies is more than 95% over ∼100 nm wavelength range, moreover, the uniformity of our beam splitter is better than 2% in the whole wavelength band. Furthermore, the physical understanding of the diffraction behaviors taking place inside the beam splitter gratings can be explained by the modal method.     

Engineering absolute band gap in anisotropic hexagonal photonic crystals

We analyze the band gap spectra of two-dimensional anisotropic photonic crystals created by a hexagonal lattice of rods covered by an interfacial layer (e.g. tellurium tubes). Using the plane-wave numerical expansion method, we study the modification of the band gap spectrum when the rods are infiltrated with other material, and discuss the optimization strategies leading to the maximum value of the absolute band gap.     

Double groove silicon grating polarizer in telecommunication wavelength band

In this paper, we propose an ultra broad band polarizer operating in the telecommunication wavelength band, this device consisting a double groove silicon grating is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents extremely high reflection (R > 95%) for TE polarization light and high transmission (T > 95%) for TM polarization over ∼400 nm wavelength range, moreover, the extinction ratio is ∼30 in the central wavelength 1550 nm. Furthermore, it is found with rigorous coupled wave analysis (RCWA) that the extremely wide band property for TE polarization is due to the excitation of strong modulation guided modes in the design wavelength range.     

Dielectric photonic crystal as medium with negative electric permittivity and magnetic permeability

We show that the two-dimensional photonic crystal (PC) made from a non-magnetic dielectric is a left-handed material in the sense defined by Veselago. Namely, it has negative values for both the electric permittivity ? and the magnetic permeability μ in some frequency range. This follows from a recently proven general theorem. The negative values of ? and μ are found by a numerical simulation. Using values |?| and |μ| for the medium surrounding the PC slab we simulate the Veselago lens, a unique optical device predicted by Veselago. An approximate analytical theory is proposed to calculate the values of ? and μ from the PC band structure. It gives the results that are close to those obtained by the numerical simulation. The theory explains how a non-zero magnetization arises in a non-magnetic PC.     

Photoluminescence of gold, copper and niobium as a function of temperature

A specially constructed instrument for measuring the low intensity photoluminescence emission spectra of metals is described. It uses low luminescence optical components and dedicated sample mounting techniques. Room temperature measurements agree closely with literature spectra for high-purity gold and are found to be sensitive to 100 ppm impurities. Detailed spectra are presented, which are weakly temperature dependent, for gold, copper and unpolished niobium between room temperature and 100 K. We conclude that this work provides accurate luminescence data for Au from 300 K down to 100 K. Although the (variable temperature) luminescence data for Cu are consistent both with the room temperature experimental data in the literature and theory, we conclude the role of surface adsorbates and/or oxides cannot be ruled out. Theory suggests that Nb has a factor ∼50 lower luminescence intensity than Au and Cu because the real part of the refractive index is a factor ∼5 higher and the density of states ∼2 eV below the Fermi energy is a factor of ∼4 lower than Au and Cu. Measurements are presented for unpolished Nb, but given the lack of signal detection for polished Nb and that theory predicts very weak signals, we conclude that the luminescence signals from pure Nb still remain below the sensitivity of our instrument.     

Band-gap properties of two-dimensional low-index photonic crystals

We study the band-gap properties of two-dimensional photonic crystals created by a lattice of rods or holes conformed in a symmetric or asymmetric triangular structure. Using numerical plane-wave method, we calculate a minimum value of the refractive-index contrast for opening both partial and full two-dimensional spectral gaps for both TM- and TE-polarized waves. We also analyze the effect of ellipticity of rods and holes and their orientation on the threshold value and the relative size of the band gaps.     

Wide band polarizer with suspended silicon grating

In this paper, we propose an ultra broadband polarizer operating in the telecommunication wavelength band; this device consisting a single silicon suspended resonant grating layer is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents extremely high reflection (R > 98%) for TE polarization light and high transmission (T > 98%) for TM polarization over ∼330 nm wavelength range; moreover, the extinction ratio is ∼100 in the central wavelength 1550 nm. Furthermore, it is found with Rigorous Coupled Wave Analysis (RCWA) and near field distribution that the extremely wide band property for TE polarization is due to the excitation of strong modulation guided modes in the design wavelength range.     

Influence of grooves in the electromagnetic transmission of a periodic metallic grating filter

The light transmittance of metal film with periodic slits and grooves structure has been investigated. It was demonstrated that the grooves significantly affect the transmittance of the metal film. The structure excavating two grooves symmetric to the central slit in a cell of a period grating displays a dent in the transmission spectrum comparing with the structure with only one slit in the cell. Deepening the grooves moves the dents to the longer wavelengths in the transmission spectrum. An analytical equation is also provided to approximately locate the dents. The grooves in the grating filter supply the advantage of removing the needless transmission of certain frequency.     

GHz magnetic response of split ring resonators

Measurements of engineered subwavelength microstructures can be designed to have positive or negative and μ at desired frequencies. We present transmission measurements of a metamaterial consisting of split ring resonators (SRR). Results for different polarizations and propagation directions are presented. The transmission shows a dip even for propagations perpendicular to the SRR plane, provided that the incident electric field is parallel to the sides of the split ring resonators (SRRs) which contain the cuts. The experimental results agree well with the theoretical calculations.     

Reflection and refraction of the electromagnetic field in a semi-infinite plasma

We compute the reflected and refracted electromagnetic fields for an ideal semi-infinite (half-space) plasma, as well as the reflection coefficient, by using a general procedure based on equations of motion and electromagnetic potentials. The approach consists of representing the charge disturbances by a displacement field in the positions of the moving particles (electrons). The propagation of an electromagnetic wave in plasma is treated by means of the retarded electromagnetic potentials, and the resulting integral equations are solved. Generalized Fresnel’s relations are thereby obtained for any incidence angle and polarization and the angles of total polarization and total reflection are derived. Bulk and surface plasmon-polariton modes are identified. As it is well known, the field inside the plasma is either damped (evanescent) or propagating (transparency regime), and the reflection coefficient exhibits an abrupt enhancement on passing from the propagating regime to the damped one (total reflection).