1H, 13C, and 73Ge NMR spectral analysis of substituted aryltrimethylgermanes

NMR chemical shifts of 1H, 13C, and 73Ge are reported for a series of monosubstituted aromatic trimethylgermanes of the type XC6H4Ge(CH3)3; X = p-N(CH3)2, p-OCH3, p-OC2H5, p-C(CH3)3, p-Si(CH3)3, p-Ge(CH3)3, p-Sn(CH3)3, p-CH3, m-CH3, -H, m-OCH3, p-Cl, p-Br, m-F, m-CF3, p-CF3, o-OCH3, and o-CH3. The relatively narrow 73Ge resonances show a strong correlation with Hammett sigma constants, with a correlation coefficient of 0.976 and 0.876 for 73Ge chemical shifts in meta- and para-substituted derivatives, respectively. The 13C chemical shifts of the methyl carbons bonded to germanium also display a relationship, with correlation coefficients of 0.904, 0.993, and 0.911 for para-, meta- and all derivatives, respectively. Comparisons of the Hammett plots for the homologous series XC6H4M(CH3)3; M = C, Si, Ge, Sn, show that, in general, correlation coefficients decrease while slopes increase significantly down the group, presumably reflecting the corresponding increase in chemical shift range of the group 14 atom. The Hammett constant derived for the p-Ge(CH3)3 group of +0.13 compares with the NMR-derived constants of -0.12 for p-C(CH3)3, +0.14 for p-Si(CH3)3, and -0.14 for p-Sn(CH3)3. The indication of electron release by carbon and tin can be rationalized through traditional hyperconjugative arguments for carbon and by the low electronegativity and consequent inductive effect of tin. The small electron attraction suggested by the positive constants for silicon and germanium can be simply, and perhaps naively, attributed to pi-acceptor interactions with the benzene ring.     

Heavy-metal aromatic and conjugated species: rings, oligomers, and chains of tin in Li(9)(-)(x)EuSn(6+)(x), Li(9)(-)(x)CaSn(6+)(x), Li(5)Ca(7)Sn(11), Li(6)Eu(5)Sn(9), LiMgEu(2)Sn(3), and LiMgSr(2)Sn(3)

The title compounds were synthesized from the elements by heating the corresponding mixtures at high temperature. Their structures were determined from single-crystal X-ray diffraction. Li(9)(-)(x)()EuSn(6+)(x)(), Li(9)(-)(x)()CaSn(6+)(x)(), Li(5)Ca(7)Sn(11), and Li(6)Eu(5)Sn(9) contain columns of stacked aromatic pentagons of Sn(5)(6)(-) that are analogous to the cyclopentadienyl anion C(5)H(5)(-). The pentagons are separated with Ca(2+) or Eu(2+) in the columns and resemble a polymeric metallocene. In addition to the columns, the isostructural Li(9)(-)(x)()EuSn(6+)(x)() and Li(9)(-)(x)()CaSn(6+)(x)() contain isolated tin atoms and bent tin trimers while Li(5)Ca(7)Sn(11) and Li(6)Eu(5)Sn(9) contain flat zigzag hexamers and flat zigzag infinite chains of tin, respectively. The isostructural LiMgEu(2)Sn(3) and LiMgSr(2)Sn(3) do not contain columns of pentagons but only flat zigzag infinite chains of tin. The aromaticity of the pentagons and the conjugation of the pi-systems of the hexamers and the infinite chains are discussed. The title compounds are also characterized by magnetic and conductivity measurements.     

Different reactivity of the heavier group 14 element alkyne analogues Ar'MMAr' (M = Ge, Sn; Ar' = C6H3-2,6(C6H3-2,6-Pri2)2) with R2NO

The reactions of the digermanium and ditin alkyne analogues Ar'MMAr' (M = Ge or Sn) with R2NO, (R2NO = Me2C(CH2)3CMe2NO or N2O), result in complete MM bond cleavage to afford the germylene :Ge(Ar')ONR2 or the germanium(II) or tin(II) hydroxides {M(Ar')(micro-OH)}2.     

Synthesis and Characterization of Ge(II), Sn(II), and Pb(II) Monoamides with -NH2 Ligands

The synthesis and characterization of the first divalent germanium, tin, and lead monoamide derivatives of the parent amide group -NH(2) are presented. They have the general formula (ArMNH(2))(2) (M = Ge, Ar = Ar'(C(6)H(3)-2,6-Pr(i)(2)) or Ar* (C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))); M = Sn, Ar = Ar*; M = Pb, Ar = Ar*). For germanium and tin, they were obtained by reacting the corresponding terphenyl halides of the group 14 elements with liquid ammonia in diethyl ether. The lead amide derivative (Ar*PbNH(2))(2) was synthesized by reaction of LiNH(2) with Ar*PbBr in diethyl ether. The compounds were characterized by IR and multinuclear NMR spectroscopies and by X-ray crystallography in the case of the (Ar'GeNH(2))(2) or (Ar*SnNH(2))(2) derivatives. They possess dimeric structures with two -NH(2) groups bridging the germanium and tin centers. For lead, the reaction with ammonia led to isolation of a stable ammine complex of formula Ar*PbBr(NH(3)) which was characterized by IR and NMR spectroscopies and by X-ray crystallography. It is the first structural characterization of a divalent lead ammine complex.     

Acidity trends in alpha,beta-unsaturated sulfur, selenium, and tellurium derivatives: comparison with C-, Si-, Ge-, Sn-, N-, P-, As-, and Sb-containing analogues

The gas-phase acidity of CH3-CH2XH (X=S, Se, Te), CH2=CHXH (X=S, Se, Te) and PhXH (X=S, Se) compounds was measured by means of Fourier transform ion cyclotron resonance mass spectrometry. To analyze the role that unsaturation plays on the intrinsic acidity of these systems, a parallel theoretical study, in the framework of the G2 and the G2(MP2) theories, was carried out for all ethyl, ethenyl (vinyl), ethynyl, and phenyl O-, S-, Se-, and Te-containing derivatives. Unsaturated compounds are stronger acids than their saturated analogues, because of the strong pi-electron donor ability of the heteroatoms that contributes to a large stabilization of the unsaturated anions. Ethynyl derivatives are stronger acids than vinyl compounds, while phenyl derivatives have an intrinsic acidity intermediate between that of the corresponding vinyl and ethynyl analogues. The CH2=CHXH vinyl compounds (enol-like) behave systematically as slightly stronger acids than their CH3-C(H)X (keto-like) tautomers. Vinyl derivatives are stronger acids than ethyl compounds, because the anion stabilization attributable to unsaturation is greater than that undergone in the neutral compounds. Conversely, the enhanced acidity of the ethynyl derivatives with respect to the vinyl compounds is due to two concomitant effects, the stabilization of the anion and the destabilization of the neutral compound. The acidities of ethyl, vinyl, and ethynyl derivatives containing heteroatoms of Groups 14, 15, and 16 of the periodic table are closely related, and reflect the differences in electronegativity of the CH3CH2-, CH2=CH-, and CH[triple chemical bond]C- groups.     

Lewis base mediated autoionization of GeCl2 and SnCl2

Cationic and anionic species of heavier low-valent group 14 elements are intriguing targets in main group chemistry due to their synthetic potential and industrial applications. In the present study, we describe the synthesis of cationic (MCl(+)) and anionic (MCl(3)(-)) species of heavier low-valent group 14 elements of germanium(II) and tin(II) by using the substituted Schiff base 2,6-diacetylpyridinebis(2,6-diisopropylanil) as Lewis base (LB). Treatment of LB with 2 equiv of GeCl(2)·dioxane and SnCl(2) in toluene gives compounds [(LB)Ge(II)Cl](+)[Ge(II)Cl(3)](-) (1) and [(LB)Sn(II)Cl](+)[Sn(II)Cl(3)](-) (2), respectively, which possess each a low-valent cation and an anion. Compounds 1 and 2 are well characterized with various spectroscopic methods and single crystal X-ray structural analysis.     

Investigation of silver salt metathesis: preparation of cationic germanium(II) and Tin(II) complexes,and silver adducts containing unsupported silver-germanium and silver-tin bonds

Syntheses of halide derivatives of germanium(II) and tin(II) aminotroponiminate (ATI) complexes and their silver salt metathesis reactions have been investigated. The treatment of GeCl(2) x (1,4-dioxane), SnCl(2), or SnI(2) with [(n-Pr)(2)ATI]Li in a 1:1 molar ratio affords the corresponding germanium(II) or tin(II) halide complex [(n-Pr)(2)ATI]MX (where [(n-Pr)(2)ATI](-) = N-(n-propyl)-2-(n-propylamino)troponiminate; M = Ge or Sn; X = Cl or I). As usually expected, [(n-Pr)(2)ATI]GeCl and [(n-Pr)(2)ATI]SnCl undergo rapid metathesis with CF(3)SO(3)Ag, leading to trifluoromethanesulfonate salts, [[(n-Pr)(2)ATI]Ge][SO(3)CF(3)] and [[(n-Pr)(2)ATI]Sn][SO(3)CF(3)], and silver chloride. However, when the silver source [HB(3,5-(CF(3))(2)Pz)(3)]Ag(eta(2)-toluene) is used, rather than undergoing metathesis, very stable 1:1 adducts [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Ge(Cl)[(n-Pr)(2)ATI] and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI] are formed (where [HB(3,5-(CF(3))(2)Pz)(3)](-) = hydrotris(3,5-bis(trifluoromethyl)pyrazolyl)borate). The use of the iodide derivative [(n-Pr)(2)ATI]SnI did not change the outcome either. All new compounds have been characterized by multinuclear NMR spectroscopy and X-ray crystallography. The Ag-Ge and Ag-Sn bond distances of [HB(3,5-(CF(3))(2)Pz)(3)]Ag<-- Ge(Cl)[(n-Pr)(2)ATI], [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI], and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(I)[(n-Pr)(2)ATI] are 2.4142(6), 2.5863(6), and 2.5880(10) A, respectively. A convenient route to [(n-Pr)(2)ATI]H is also reported.     

The Co-CH(3) Bond in Imine/Oxime B(12) Models. Influence of the Orientation and Donor Properties of the trans Ligand As Assessed by FT-Raman Spectroscopy

Near-IR FT-Raman spectroscopy was used to probe the properties of three types of methyl imine/oxime B(12) model compounds in CHCl(3) solution. These types differ in the nature of the 1,3-propanediyl chain and were selected to test the influence of electronic and steric effects on the Co-CH(3) stretching (nu(Co)(-)(CH)()3) frequency, a parameter related to Co-C bond strength. For the first type studied, [LCo((DO)(DOH)pn)CH(3)](0/+) ((DO)(DOH)pn = N(2),N(2)(')-propane-1,3-diylbis(2,3-butanedione 2-imine 3-oxime)), nu(Co)(-)(CH)()3 decreased from 505 to 455 cm(-)(1) with stronger electron-donating character of the trans axial ligand, L, in the order Cl(-), MeImd, Me(3)Bzm, 4-Me(2)Npy, py, 3,5-Me(2)PhS(-), PMe(3), and CD(3)(-). This series thus allows the first assessment of the effect of negative axial ligands on nu(Co)(-)(CH)()3; these ligands (L = Cl(-), 3,5-Me(2)PhS(-), CD(3)(-)) span the range of trans influence. The CH(3) bending (delta(CH3)) bands were observed at 1171, 1159, and 1150/1105 cm(-)(1), respectively. The decrease in C-H stretching frequencies (nu(CH)) of the axial methyl suggests that the C-H bond strength decreases in the order Cl(-) > 3,5-Me(2)PhS(-) > CD(3)(-). This result is consistent with the order of decreasing (13)C-(1)H NMR coupling constants obtained for the axial methyl group. The trend of lower nu(Co)(-)(CH)()3 and nu(CH) frequencies and lower axial methyl C-H coupling constant for stronger electron-donating trans axial ligands can be explained by changes in the electronic character of the Co-C bond. The symmetric CH(3)-Co-CH(3) mode (nu(CH)()3(-)(Co)(-)(CH)()3) for (CH(3))(2)Co((DO)(DOH)pn) was determined to be 456 cm(-)(1) (421 cm(-)(1) for (CD(3))(2)Co((DO)(DOH)pn). The L-Co-CH(3) bending mode (delta(L)(-)(Co)(-)(CH)()3) was detected for the first time for organocobalt B(12) models; this mode, which is important for force field calculations, occurs at 194 cm(-)(1) for ClCo((DO)(DOH)pn)CH(3) and at 186 cm(-)(1) for (CH(3))(2)Co((DO)(DOH)pn. The nu(Co)(-)(CH)()3 frequencies were all lower than those reported for the corresponding cobaloxime type LCo(DH)(2)CH(3) (DH = monoanion of dimethylglyoxime) models for planar N-donor L. This relationship is attributed to a steric effect of L in [LCo((DO)(DOH)pn)CH(3)](+). The puckered 1,3-propanediyl chain in [LCo((DO)(DOH)pn)CH(3)](+) forces the planar L ligands to adopt a different orientation compared to that in the cobaloxime models. The consequent steric interaction bends the equatorial ligand toward the methyl group (butterfly bending); this distortion leads to a longer Co-C bond. In a second imine/oxime type, a pyridyl ligand is connected to the 1,3-propanediyl chain and oriented so as to minimize butterfly bending. The nu(Co)(-)(CH)()3 frequency for this new lariat model was close to that of pyCo(DH)(2)CH(3). In a third type, a bulkier 2,2-dimethyl-1,3-propanediyl group replaces the 1,3-propanediyl chain. The nu(Co)(-)(CH)()3 bands for two complexes with L = Me(3)Bzm and py were 2-5 cm(-)(1) lower in frequency than those of the corresponding [L(Co((DO)(DOH)pn)CH(3)](+) complexes. The decrease in the axial nu(Co)(-)(CH)()3 frequencies is probably due to the steric effect of the equatorial ligand. Thus, the nu(Co)(-)(CH)()3 frequency can be useful for investigating both steric and electronic influences on the Co-C bond.     

Reactions of the heavier group 14 element alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pri2)2; E = Ge, Sn) with unsaturated molecules: probing the character of the EE multiple bonds

Reactions of the alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2; E = Ge (1); Sn (2)) with unsaturated molecules are described. Reaction of 1 and 2 with azobenzene afforded the new hydrazine derivatives Ar'E{(Ph)NN(Ph)}EAr' (E = Ge (3); Sn (4)). Treatment of 1 with Me3SiN3 gave the cyclic singlet diradicaloid Ar'Ge{mu2-(NSiMe3)}2GeAr' (5), whereas 2 afforded the monoimide bridged Ar'Sn{mu2-N(SiMe3)}SnAr' (6). Reaction of 1 with t-BuNC or PhCN yielded the adduct Ar'GeGe(CNBu(t))Ar' (7) or the ring compound (8). In contrast, the tin compound 2 did not react with either t-BuNC or PhCN. Treatment of 1 with N2CH(SiMe3) generated Ar'Ge{mu2-CH(SiMe3)}{mu2:eta2-N2CH(SiMe3)}{mu2-N2CH(SiMe3)}GeAr' (9) which contains ligands in three different bridging modes and no Ge-Ge bonding. Reaction of 1 with an excess of N(2)O gave a germanium peroxo species Ar'(HO)Ge(mu2-O)(mu2:eta2-O2)Ge(OH)Ar' (10) which features a ring. Oxidation of 1 by tetracyanoethylene (TCNE) led to cleavage of the Ge-Ge bond and formation of a large multiring system of formula Ar'Ge3+{(TCNE)2-}3{(GeAr')+}3. The digermyne 1 also reacted with 1 equiv of PhCPh to give the 1,2-digermacyclobutadiene 12, which has a ring, and with Me(3)SiCCH or PhCC-CCPh to activate a flanking C6H3-2,6-Pr(i)2 ring and give the tricyclic products 13 and 14. The "distannyne" 2 did not react with these acetylenes. Overall, the experiments showed that 1 is highly reactive toward unsaturated molecules, whereas the corresponding tin congener 2 is much less reactive. A possible explanation of the reactivity differences in terms of the extent of the singlet diradical character of the Ge-Ge and Sn-Sn bonds is discussed.     

Self-assembly of diorganotin(IV) moieties and 2-pyrazinecarboxylic acid: syntheses, characterizations and crystal structures of monomeric, polymeric or trinuclear macrocyclic compounds

A series of diorganotin(IV) compounds of the type [R(2)Sn(pca)Cl](3)(R = CH(3); (n)Bu; C(6)H(5); C(6)H(5)CH(2); Hpca = 2-pyrazinecarboxylic acid), R(2)Sn(pca)(2)(mH(2)O)xnH(2)O (m= 1: R = CH(3), n= 2, R =(n)Bu, n= 0; m= 0, n= 0: R =(n)Bu, C(6)H(5), C(6)H(5)CH(2)) and (Et(3)NH)(+)[R(2)Sn(pca)(2)Cl](-)xmH(2)O (m= 0: R = CH(3), (n)Bu, C(6)H(5)CH(2); m= 1: R = C(6)H(5)) have been obtained by reactions of 2-pyrazinecarboxylic acid with diorganotin(iv) dichloride in the presence of sodium ethoxide or triethylamine. All compounds were characterized by elemental, IR and NMR spectra analyses. Except for compounds, and, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that compounds and were trinuclear macrocyclic structures with six-coordinate tin(IV) atoms, compounds and were monomeric structures with seven-coordinate tin(IV) atoms, compounds and were polymeric chain structures with seven-coordinate tin(IV) atoms and compounds and were stannate with seven-coordinate tin(IV) atoms.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

Diaminogermylene and diaminostannylene derivatives of gold(I): novel AuM and AuM2 (M = Ge, Sn) complexes

The reactions of [AuCl(THT)] (THT = tetrahydrothiophene) with 1 equiv of the group 14 diaminometalenes M(HMDS)(2) [M = Ge, Sn; HMDS = N(SiMe(3))(2)] lead to [Au{MCl(HMDS)(2)}(THT)] [M = Ge (1), Sn (2)], which contain a metalate(II) ligand that arises from insertion of the corresponding M(HMDS)(2) reagent into the Au-Cl bond of the gold(I) reagent. While compound 1 reacts with more Ge(HMDS)(2) to give the germanate-germylene derivative [Au{GeCl(HMDS)(2)}{Ge(HMDS)(2)}] (3), which results from substitution of Ge(HMDS)(2) for the THT ligand of 1, an analogous treatment of compound 2 with Sn(HMDS)(2) gives the stannate-stannylene derivative [Au{SnCl(HMDS)(2)}{Sn(HMDS)(2)(THT)}] (4), which has a THT ligand attached to the stannylene tin atom and which, in solution at room temperature, participates in a dynamic process that makes its two Sn(HMDS)(2) fragments equivalent (on the NMR time scale). A similar dynamic process has not been observed for the AuGe(2) compound 3 or for the AuSn(2) derivatives [Au{SnR(HMDS)(2)}{Sn(HMDS)(2)(THT)}] [R = Bu (5), HMDS (6)], which have been prepared by treating complex 4 with LiR. The structures of compounds 1 and 3-6 have been determined by X-ray diffraction.     

Tetrylenes chelated by hybrid amido-amino ligand: derivatives of 2-[(N,N-dimethylamino)methyl]aniline

Reaction of 2-[(dimethylamino)methyl]aniline with butyllithium, followed by conversion with trimethylsilyl, triphenylsilyl, triphenylgermyl, trimethylstannyl, or tri-n-butylstannyl chloride, gives the corresponding substituted aniline. These compounds were further deprotonated by butyllithium and reacted with germanium, tin, and lead dichlorides, respectively, in both stoichiometric ratios 2:1 and 1:1, providing the target homo- ([2-(Me(2)NCH(2))C(6)H(4)(YR(3))N](2)M) and heteroleptic ([2-(Me(2)NCH(2))C(6)H(4)(YR(3))N]MCl) germylenes and stannylenes, where M = Ge, Sn, Y = Si, Ge, and R = Me, Ph. Unlike all of these cases, the heteroleptic plumbylene can only be obtained with this reaction when the amide is substituted by a trimethylsilyl moiety. Anilines substituted by trimethyltin or tri-n-butyltin moieties gave transmetalation products after the second deprotonation by butyllithium. The trimethyltin-substituted stannylenes could likewise not be obtained by hexamethyldisilazane elimination of (trimethylstannyl)-2-[(dimethylamino)methyl]aniline with 0.5 mol equiv of either bis[bis(trimethylsilyl)amido]tin or {bis[bis(trimethylsilyl)amido]tin chloride}. Products of these reactions are heterocubanes with compositions {[2-(Me(2)NCH(2))C(6)H(4)N]Sn}(4) and [2-(Me(2)NCH(2))C(6)H(4)N](2)(μ(2)-SnMe(2))(2), respectively, and Me(4)Sn or Me(3)SnCl. The structures of trimethylsilyl- and triphenylgermyl-substituted germylenes, stannylenes, and plumbylenes, as well as a number of their precursors, in the crystalline state, were investigated by X-ray diffraction and NMR spectroscopy in solution. Density functional theory methods were used for evaluation of the structures of several compounds.     

Synthesis of ONO-Ligated Tetrylenes Based on 2,6-bis(2-Hydroxyphenyl)pyridines: Influence of Ligand Sterics on the Structure of the Products

A series of novel tetrylenes based on three 2,6-bis(2-hydroxyphenyl)pyridines 4 a – 4 c have been obtained by the reaction of Lappert's tetrylenes E[N(SiMe₃)₂]₂ (E=Ge, Sn) with corresponding tridentate pyridine-linked phenol-based ligands. It was found that the structure of the ligand and the size of the atom of the group 14 element drastically affect the structure of the reaction product. Ligand 4 c with a bulky tert-butyl group leads to monomeric tetrylenes, while ligands with less bulky groups lead to bis-ligand derivatives of M(IV) (M=Ge, Sn) and a coordination polymer. Also, derivatives of germanium (IV) and tin (IV) were obtained by the metathesis reaction of MCl₄ (M=Ge, Sn) with lithium phenoxides. The compositions and structures of the novel compounds were established by elemental analysis and ¹H, ¹³C, ¹¹⁹Sn ( 5 – 7 ), ¹H DOSY ( 6 ) NMR spectroscopy, in the solid state by X-ray diffraction analysis (germylene 10 , stannylene 6 , Ge⁴⁺ compound 8 , Sn⁴⁺ compound 7 ) and ¹¹⁹Sn Mössbauer spectrum of tin complex 6 . All the synthesized tetrylenes are monomeric. Tetrylenes 6 and 10 were characterized by cyclic voltammetry. A study of the redox behavior of 6 , 10 by cyclic voltammetry on a glassy carbon working electrode in acetonitrile solution of 0.1 M Bu₄NPF₆ as a supporting electrolyte showed that these compounds can be both oxidized and reduced electrochemically in the accessible potential range.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Group 14 Metal Terminal Phosphides: Correlating Structure with |J(MP)|

A series of heavier group 14 element, terminal phosphide complexes, M(BDI)(PR(2)) (M = Ge, Sn, Pb; BDI = CH{(CH(3))CN-2,6-iPr(2)C(6)H(3)}(2); R = Ph, Cy, SiMe(3)) have been synthesized. Two different conformations (endo and exo) are observed in the solid-state; the complexes with an endo conformation have a planar coordination geometry at phosphorus (M = Ge, Sn; R = SiMe(3)) whereas the complexes possessing an exo conformation have a pyramidal geometry at phosphorus. Solution-state NMR studies reveal through-space scalar coupling between the tin and the isopropyl groups on the N-aryl moiety of the BDI ligand, with endo and exo exhibiting different J(SnC) values. The magnitudes of the tin-phosphorus and lead-phosphorus coupling constants, |J(SnP)| and |J(PbP)|, differ significantly depending upon the hybridization of the phosphorus atom. For Sn(BDI)(P{SiMe(3)}(2)), |J(SnP)| is the largest reported in the literature, surpassing values attributed to compounds with tin-phosphorus multiple-bonds. Low temperature NMR studies of Pb(BDI)(P{SiMe(3)}(2)) show two species with vastly different |J(PbP)| values, interpreted as belonging to the endo and exo conformations, with sp(2)- and sp(3)-hybridized phosphorus, respectively.     

Ab initio molecular orbital study on the Ge-, Sn-, Zr- and Si/Ge-mixed silsesquioxanes

For the purpose of designing new functional silsesquioxanes (POSS), the structure and stability of the analogous compounds of the heavier group 14 and 4 elements such as germanium (Ge-POSS), tin (Sn-POSS) and zirconium (Zr-POSS) analogues of POSS were investigated and compared with those of the parent POSS and the titanium analogue (Ti-POSS) with electronic structure theory calculations, including electron correlation effects. In order to obtain information about the metalloxane (-X-O-X-) linkage, the structures and properties of the building blocks of metallasilsesquioxanes, such as dimetalloxanes, H(OH)2XOX(OH)2H, X = Ge, Sn and Zr, and cyclometalloxanes, [H(OH)XO]n , n = 3-6, X = Ge, Sn and Zr, were examined. The stability of the Si/Ge-mixed POSS were also studied in comparison with POSS and the completely germanium-substituted POSS.     

Strong dissimilarities between the gas-phase acidities of saturated and alpha,beta-unsaturated boranes and the corresponding alanes and gallanes

The effect that unsaturation has on the intrinsic acidity of boranes, alanes, and gallanes, was analyzed by B3 LYP and CCSD(T)/6-311+G(3df,2p) calculations on methyl-, ethyl-, vinyl-, and ethynylboranes, -alanes and -gallanes, and on the corresponding hydrides XH3. Quite unexpectedly, methylborane, which behaves as a carbon acid, is predicted to have an intrinsic acidity almost 200 kJ mol(-1) stronger than BH3, reflecting the large reinforcement of the C--B bond, which upon deprotonation becomes a double bond through the donation of the lone pair created on the carbon atom into the empty p orbital of the boron. Also unexpectedly, and for the same reason, the saturated and alpha,beta-unsaturated boranes are much stronger acids than the corresponding hydrocarbons, in spite of being carbon acids as well. The Al derivatives also behave as carbon acids, but in this case the most favorable deprotonation process occurs at C beta, leading to the formation of rather stable three-membered rings, again through the donation of the C beta lone pair into the empty p orbital of Al. For Ga-containing compounds the deprotonation of the GaH2 group is the most favorable process. Therefore only Ga derivatives behave similarly to the analogues of Groups 14, 15, and 16 of the periodic table, and the saturated derivatives exhibit a weaker acidity than the unsaturated ones. Within Group 13, boranes are stronger acids than alanes and gallanes. For ethyl and vinyl derivatives, alanes are stronger acids than gallanes. We have shown, for the first time, that acidity enhancement for primary heterocompounds is not only dictated by the position of the heteroatom in the periodic table and the nature of the substituent, but also by the bonding rearrangements triggered by the deprotonation of the neutral acid.     

Synthesis, structure, and thermal properties of soluble hydrazinium germanium(IV) and tin(IV) selenide salts

The crystal structures of two hydrazinium-based germanium(IV) and tin(IV) selenide salts are determined. (N(2)H(5))(4)Ge(2)Se(6) (1) [I4(1)cd, a = 12.708(1) Angstroms, c = 21.955(2) Angstroms, Z = 8] and (N(2)H(4))(3)(N(2)H(5))(4)Sn(2)Se(6) (2) [P, a = 6.6475(6) Angstroms, b = 9.5474(9) Angstroms, c = 9.8830(10) Angstroms, alpha = 94.110(2) degrees, beta = 99.429(2) degrees, gamma = 104.141(2) degrees, Z = 1] each consist of anionic dimers of edge-sharing metal selenide tetrahedra, M(2)Se(6)(4-) (M = Ge or Sn), separated by hydrazinium cations and, for 2, additional neutral hydrazine molecules. Substantial hydrogen bonding exists among the hydrazine/hydrazinium molecules as well as between the hydrazinium cations and the selenide anions. Whereas the previously reported tin(IV) sulfide system, (N(2)H(5))(4)Sn(2)S(6), decomposes cleanly to microcrystalline SnS(2) when heated to 200 degrees C in an inert atmosphere, higher temperatures (>300 degrees C) are required to dissociate selenium from 1 and 2 for the analogous preparations of single-phase metal selenides. The metal chalcogenide salts are highly soluble in hydrazine, as well as in a variety of amines and DMSO, highlighting the potential usefulness of these compounds as precursors for the solution deposition of the corresponding metal chalcogenide films.     

Formation of a novel trinuclear spirostannoxane tin(IV) compound. Crystal and molecular structure of [Sn(nBu)(Cl)[(OCH2CH2S)2Sn(nBu)]2] and the stannolane [(nBu)Sn(SCH2CH2O)SCH2CH2OH

The reaction of nBuSnCl3 and the sodium salt of 2-mercaptoethanol (1:1) in ethanol gave the compound Sn(nBu)(Cl)[(OCH2CH2S)2Sn(nBu)]2 (1). [(nBu)Sn(SCH2CH2O)SCH2CH2OH] (2) was initially isolated from the reaction of 1 with nBuMgCl as a rearrangement product but was also synthesized from nBuSn(O)OH and two molar equivalents of 2-mercaptoethanol. Both compounds were characterized by means of IR, 119Sn, 13C, and 1H NMR, FAB mass spectroscopy, and elemental analyses. The structures were determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic Cc space group (a = 18.492(3) A, b = 17.329(2) A, c = 10.787(1) A, beta = 111.88(1) degrees, Z = 4), while 2 crystallizes in the orthorhombic Pbca space group (a = 14.458(2) A, b = 10.393(1) A, c = 16.479(2) A, Z = 8). 1 is a trimetallic Tin(IV) compound in which the central atom is in 6-fold coordination, while the two remaining tin atoms show 5-fold coordination. Both pentacoordinated tin atoms are bonded to a butyl group and to the oxygen and the sulfur atoms from two [OCH2CH2S]2- ligands forming two stannolanes, which are fused with the hexacoordinated tin atom forming a distannoxane system. This arrangement is quite different from previous ladder or staircase structures. NMR data point to maintenance of this structure in solution. 2 consists of [(nBu)Sn(SCH2CH2O)(SCH2CH2OH)] units, which are associated via intermolecular Sn-O interactions building up a dimer. The tin atom forms two "stannolane" units by interaction with [OCH2CH2S]2- and [HOCH2CH2S]- ligands.