聚吖啶橙修饰电极伏安法测定黄嘌呤

报道了聚吖啶橙 (POAO)修饰电极多阶半微分伏安法测定黄嘌呤 (Xa)。在pH 5 .3的磷酸盐缓冲溶液中 ,Xa在POAO电极上于 0 .8V处产生一灵敏的氧化峰 ,峰电流与其浓度在 7.8× 1 0 - 8～ 1 .1× 1 0 - 6mol/L和 1 .1× 1 0 - 6～ 1 .0×1 0 - 5mol/L范围内呈良好的线性关系 ,检出限为 7.8× 1 0 - 9mol/L。方法可用于人尿中Xa的测定     

碳纳米管修饰电极对多巴胺和肾上腺素的电分离及同时测定

研究了多巴胺 (DA)和肾上腺素 (EP)在多壁碳纳米管 (MWNT)修饰电极上的电化学性质 ,发现该修饰电极对神经递质DA和EP有显著的增敏和电分离作用。还原峰电位差达ΔEp=390mV ,可同时测定DA和EP。DA和EP的还原峰电流与其浓度分别在 2 .0× 10 -6～ 1.0× 10 -3 mol/L和 1.0× 10 -6～ 1.0× 10 -3 mol/L浓度范围内呈良好的线性关系 ;方法的检出限分别为 1× 10 -6mol/L和 5× 10 -7mol/L。由于抗坏血酸 (AA)在MWNT修饰电极上的氧化是不可逆的 ,因此利用还原峰进行测定 ,消除了AA对DA和EP的干扰     

尿酸在普鲁士蓝修饰电极上的电化学行为及其分析应用

用恒电位电解法制备了普鲁士蓝修饰玻碳电极,研究了尿酸(UA)在该电极上的电化学行为,并提出了一种新的用于检测UA的方法。在 0. 1mol/L(pH5. 0 )的醋酸缓冲溶液中, 0. 100mol/LKCl作为支持电解质,UA在普鲁士蓝修饰电极上于 0. 470V处产生一灵敏的氧化峰,方波伏安法测定其氧化峰电流与UA浓度在 2. 5×10-6 ~2. 0×10-4 mol/L范围内呈良好的线性关系,相关系数为 0. 9986,检出限为 1. 1×10-6 mol/L。该电极制作简单,重现性良好,可用于UA的测定。     

聚氨基磺酸修饰玻碳电极在抗坏血酸共存时测定肾上腺素

研究了聚氨基磺酸修饰玻碳电极的制备及肾上腺素和抗坏血酸在此修饰电极上的电化学行为。在磷酸盐缓冲液pH为 7. 0的条件下,肾上腺素在修饰电极上呈现 2个氧化峰和 1个还原峰。其峰电位都随着pH值的增加而负移。当肾上腺素与抗坏血酸共存时,EP较正处氧化峰电位与AA氧化峰电位差达 190mV。肾上腺素氧化峰电流与其浓度在 1. 0×10-7 ~1. 0×10-4 mol/L的范围时呈良好的线性关系,其线性回归方程为ip(10μA) = 1. 455 + 0. 3765C(mol/L), 相关系数r=0. 9977,检出限为 1. 0×10-8 mol/L。实验结果表明:该修饰电极能同时测定肾上腺素和抗坏血酸; 100倍的马尿酸、半胱氨酸、柠檬酸不干扰测定。方法用于注射液中肾上腺素的检测,结果令人满意。     

过氧化聚吡咯膜修饰电极检测肾上腺素研究

报道了肾上腺素(EP)在过氧化聚吡咯膜(OPPy)修饰电极上的电化学行为及其测定方法。过氧化聚吡咯膜(OPPy)修饰电极对EP的氧化还原具有良好的催化作用,并具有较高的选择性。在最佳实验条件下,EP的还原峰电流与其浓度在2×10-7~5×10-4mol.L-1范围内呈良好的线性关系,相关系数为0.999 9,检出限为8×10-8mol.L-1。将该电极应用于EP实际样品的测定,效果良好。     

单壁碳纳米管/聚合物修饰玻碳电极的电化学行为及酪氨酸的伏安测定

制备了一种新型的单壁碳纳米管复合聚对氨基吡啶(SWNTs POAP)修饰电极。研究了酪氨酸(Tyr)在该电极上的电化学行为。SWNTs POAP修饰电极对Tyr具有良好的电催化作用,氧化峰电流分别与Tyr的浓度在1.0×10-7～5.0×10-6mol L和6.0×10-6～6.0×10-5mol L范围内呈良好线性关系,检出限为5.0×10-8mol L。该电极具有良好的灵敏度、选择性和稳定性,可用于Tyr的测定。     

甲苯胺蓝修饰电极的电化学性质及对抗坏血酸的测定

研究了甲苯胺蓝(TB)聚合膜修饰金电极的制备及其电化学性质,并用于抗坏血酸(AA)的测定。在pH 6.5的磷酸盐缓冲溶液中,AA在甲苯胺蓝修饰金电极上产生一灵敏的氧化峰,峰电流与AA的浓度在3.9×10-5~1.0×10-2mol/L范围内呈良好的线性关系,检出限为1.3×10-5mol/L。该电极重现性良好,已用于实际样品中AA的测定。     

聚L-谷氨酸/石墨充蜡修饰电极测定多巴胺

用充蜡石墨电极 (WGE)在L 谷氨酸 (GA)无水乙醇溶液中恒电位于 1.6V(vs.SCE)氧化制备了一种聚GA修饰电极 (GA/WGE) ,该电极可用于肾上腺素 (EP)和抗坏血酸 (AA)共存下对多巴胺 (DA)的测定。该电极的灵敏度和选择性主要取决于阳极极化电位与极化时间、富集电位和溶液的pH。DA在该电极上呈现一对循环伏安峰 ,Em=0 .14 5V ,为 1电子 / 1质子的准可逆氧化还原过程。AA和EP也能够在电极上富集和催化氧化 ,伏安峰分别在 0 .30V和 0 .17V。当AA浓度小于 0 .1mmol/L时 ,电极对AA基本不响应 ,可以用DA的氧化峰电流做定量分析。线性范围为 2 .0× 10 -4～ 5 .0× 10 -7mol/L ;检出限为 2 .5× 10 -7mol/L。当AA的浓度较大或在AA、EP共存下 ,可利用DA氧化的再还原峰电流做定量分析。线性范围为 1.0× 10 -4～ 2 .5× 10 -6mol/L ;检出限为 7.5× 10 -7mol/L。该电极制作简便 ,重现性良好 ,定量结果也令人满意     

肾上腺素在聚对氨基吡啶化学修饰电极上的电化学行为及其吸附伏安法测定

报道了肾上腺素(EP)在聚对氨基吡啶(POAP)修饰电极上的电化学行为及其测定方法。POAP修饰电极对EP的氧化有良好的电催化作用。最佳条件下,氧化峰电流与EP的浓度在5×10-8～9×10-6mol L和9×10-6～9×10-5mol L范围内呈良好线性关系,相关系数分别为0.9990和0.9997,检出限为2.5×10-9mol L。该电极寿命已超过两年,已用于实际样品中EP的测定。     

聚L-白氨酸修饰电极伏安法测定痕量多巴胺的研究

用循环伏安法制备了聚L-白氨酸修饰玻碳电极,研究了多巴胺在聚L-白氨酸修饰玻碳电极上的电化学行为,建立了循环伏安法测定痕量多巴胺的新方法。实验结果表明,在pH 6.0的磷酸盐缓冲溶液中,多巴胺在聚L-白氨酸修饰玻碳电极上产生一对灵敏的氧化还原峰,峰电位分别为Epa=0.281V,Epc=0.170 V(相对Ag/AgCl电极)。峰电流与多巴胺的浓度在5.0×10-8~5.0×10-4mol/L的范围内有线性关系,检出限为5.0×10-9mol/L。对1.0×10-5mol/L多巴胺溶液平行测定9次,其相对标准偏差为4.0%。已用于针剂中多巴胺的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.