Synthesis of a new class of compounds containing a Ln-O-Al arrangement and their reactions and catalytic properties

Synthesis of a new class of compounds containing a Ln-O-Al moiety has been accomplished by the reaction of LAlOH(Me) (L = HC(CMeNAr)(2), Ar = 2,6-iPr(2)C(6)H(3)) with a series of Cp(3)Ln compounds. The terminal Al-OH group shows selective reactivity, and the complexes Cp(2)Ln(THF)-O-AlL(Me) (Ln = Yb, 1; Er, 2; Dy, 3), Cp(2)Yb-O-AlL(Me) (4), and Cp(3)Ln(mu-OH)AlL(Me) (Ln = Er, 5; Dy, 6; Sm, 7) were obtained. This allows further insight into the proton exchange process, and two different mechanisms, intermolecular and intramolecular elimination of CpH, are proposed under different conditions. Complexes 1-4, 6, and 7 have been characterized by X-ray structural analyses which reveals a Ln-O-Al or Ln(mu-OH)Al core in these complexes. The obtuse Ln-O-Al angles fall in the range 151.9-169.8 degrees . The reaction of 1 or 4 with Me(3)SnF in toluene under refluxing conditions unexpectedly yielded the compounds [Cp(2)Yb(mu-OSnMe(3))](2) (8) and LAl(Me)F (9). Reactions of LAlOH(Me) with the mono- and dicyclopentadienyl complexes LYbCp(Cl) (10) and LYbCp(2) (11) supported by the bulky beta-diketiminate ligand were unsuccessful. However, the reaction of LAl(OH)Me with LYbN(SiMe(3))(2)Cl (12) containing a labile Yb-N bond leads to the formation of LYbCl-O-AlL(Me) (13) under elimination of HN(SiMe(3))(2). Furthermore, complexes 1, 3, 4, and 6 exhibit good catalytic activity for the polymerization of epsilon-caprolactone.     

Studies of the ligand effect on the synthesis of dialuminoxanes by various β-diketiminato ligands

Reactions of LH (L = HC[C(Me)N(2,6-Me(2)C(6)H(3))](2)) with Me(n)AlCl(3-n) in diethyl ether afforded the adducts LH·AlMe(n)(Cl)(3-n) (n = 2, 3; 1, 4; 0, 5) in good yields. Treatment of 3 at elevated temperatures in toluene resulted in LAlMeCl (2) by intramolecular elimination of methane. The controlled hydrolysis of LAlMeCl (2) with equimolar amounts of water in the presence of N-heterocyclic carbene (NHC) gave a mixture of [LAl(Me)](2)(μ-O) (7) and dimeric [LAlMe(μ-OH)](2) (8). A convenient route for the preparation of [LAlMe(μ-OH)](2) (8) was the NHC-assisted controlled hydrolysis of LAlMeI (9). Stepwise hydrolysis of LAlH(2) (11) gave dialuminoxane hydride [LAl(H)](2)(μ-O) (12) and dialuminoxane hydroxide [LAl(OH)](2)(μ-O) (13), respectively. Anhydrous treatment of LAlCl(2) (1) or LAlMeCl (2) with Ag(2)O afforded chlorinated dialuminoxane [LAl(Cl)](2)(μ-O) (14) and [LAl(Me)](2)(μ-O) (7), respectively.     

Synthesis, characterization, and reaction of aluminum halide amides supported by a bulky beta-diketiminato ligand

Monomeric aluminum chloride amides with the general formula LAl(Cl)NR2 (1, R = Me; 2, R = iPr; 3, R = SiMe 3; L = HC[C(Me)N(Ar)]2; Ar = 2,6- iPr2C6H3) were prepared by selected routes. Treatment of LAlBr 2 (4) and LAlI2 with LiNMe2 yielded LAl(Br)NMe2 (5) and LAl(I)NMe2 (6), respectively. The alkylation of 1 and 2 with MeLi gave the corresponding methylated compounds LAl(Me)NR2 (7, R = Me; 8, R = iPr); however, no reaction of 3 with MeLi was observed because of steric hindrance. Subsequent fluorination of 1- 3 afforded LAl(F)NR2 (9, R = Me; 10, R = iPr; 11, R = SiMe3). Compounds 1-11 were characterized by multinuclear NMR, electron impact mass spectrometry, and IR. The constitution of compounds 1-3 was confirmed by single-crystal X-ray diffraction studies.     

Synthesis, characterization, and X-ray crystal structure of a gallium monohydroxide and a hetero-bimetallic gallium zirconium oxide

A monomeric hydroxide of gallium, LGa(Me)OH, containing terminal hydroxide and methyl groups was prepared by the hydrolysis of LGa(Me)Cl in the presence of N-heterocyclic carbene and water [L = HC{(CMe)(2,6-i-Pr2C6H3N)}2] in high yield and in a pure form. LGa(Me)OH was used as a synthon to assemble the first hetero-bimetallic compound with a Ga-O-Zr core, [(LGaMe)(Cp2ZrMe)](mu-O).     

Synthesis of an aluminum spirocyclic hybrid with an inorganic B2O3 and an organic C3N2 core

The reaction of LAl (L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3) or LAlH2 with PhB(OH)2 yields the unprecedented spirocyclic LAl[(OBPh)2O] compound. The former reaction proceeds under hydrogen formation and simultaneous oxidation of the aluminum(I).     

Alkali metal complexes of sterically hindered mono- and di-carbanions containing Si-O bonds

The oxygen-bridged, silicon-substituted alkane {(Me3Si)2CH(SiMe2)}2O (1) may be prepared by the reaction of {(Me3Si)2CH}Li with ClSiMe2OSiMe2Cl in refluxing THF. Similarly, the alkane {(Me3Si)(Me2MeOSi)CH(SiMe2CH2)}2 (2) is readily accessible from the reaction between {(Me3Si)(Me2MeOSi)CH}Li and ClSiMe2CH2CH2SiMe2Cl under the same conditions. Compound 1 reacts with two equivalents of MeK to give the polymeric complex [[{(Me3Si)2C(SiMe2)}2O]K2(OEt2)]infinity [5(OEt2)] after recrystallisation. Treatment of 2 with two equivalents of either MeLi or MeK gives the corresponding complexes [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2Li][Li(DME)3] [7(DME)3] and [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2K2]n (8), respectively, after recrystallisation. Treatment of the alkane (Me3Si)2(Me2MeOSi)CH with one equivalent of MeK gives the polymeric complex [{(Me3Si)2(Me2MeOSi)C}K]infinity (3). These compounds have been identified by 1H and 13C{1H} NMR spectroscopy and elemental analyses and compounds 5(OEt2), 7(DME)3 and 3 have been further characterised by X-ray crystallography. Compound 7(DME)3 crystallises as a solvent-separated ion pair, whereas 5(OEt2) and 3 adopt polymeric structures in the solid state.     

Synthesis of carbaalane halogen derivatives

The carbaalane halogen derivatives [(AlX)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (X = F (9), Cl (7), Br (10), I (11)) were prepared in toluene from [(AlH)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (6) and BF(3).OEt(2), BX(3) (X = Br, I), Me(3)SnF, and Me(3)SiX (X = Cl, Br, I), respectively. A partially halogenated product [(AlH)(2)(AlX)(4)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (12) (X = Cl (approximately 40%), Br (approximately 60%)) was obtained from 5 and impure BBr(3). [(AlH)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (5) was converted to [(AlX)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (X = F (13), Cl (14), Br (15), I (16)) using BF(3).OEt(2) and Me(3)SiX (X = Cl, Br, I), respectively. The X-ray single-crystal structures of 11.C(6)H(6), 12.3C(7)H(8), 13.6C(7)H(8), and 15.4C(7)H(8) were determined. Compounds 7 and 9-11 are soluble in benzene/toluene and could be well characterized by NMR spectroscopy and MS (EI) spectrometry. The results demonstrate the facile substitution of the hydridic hydrogen atoms in 5 and 6 by the halides with different reagents.     

Synthesis and structural characterization of a terminal hydroxide containing alumoxane via hydrolysis of aluminum hydrides

A novel terminal hydroxide containing dinuclear alumoxane LAl(OH)OAlL(OCH=N-tBu) (3; L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3) was prepared by treatment of aluminum dihydride LAlH2 (1) and tert-butyl isocyanate in the presence of trace amounts of water and alternatively from 1 and LAlH(OCH=N-tBu) (2) with water. Compound 2 was obtained from the reaction of 1 and tert-butyl isocyanate.     

Synthesis of boroxine-linked aluminum complexes

The reaction of LAlH(2) (L = HC(CMeNAr)(2), Ar = 2,6-iPr(2)C(6)H(3)) (1) with 3-methylphenylboronic acid and 3-fluorophenylboronic acid resulted in the boroxine-linked aluminum compounds LAl[OB(3-CH(3)C(6)H(4))](2)(μ-O) (2) and LAl[OB(3-FC(6)H(4))](2)(μ-O) (3), respectively. LAl[OB(2-PhC(6)H(4))(OH)](2) (4) was synthesized by the reaction of 1 with 2-biphenylboronic acid. Compound 4 is the intermediate analogue to those, which we postulated for the formation of 2 and 3. The reaction of 1 with 3-hydroxyphenylboronic acid resulted in the first metal benzoboroxole oxide LAl[OB(o-CH(2)O)C(6)H(4)](2) (5), which is formed from a compound with B-(OH)(2) and C-OH functionalities.     

Synthesis and characterization of aluminum-containing tin(IV) heterobimetallic sulfides

Three novel aluminum-containing tin(IV) heterobimetallic sulfides are reported. The reaction of [LAl(SLi)2(THF)2]2 (1) [L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3] with Ph2SnCl2, Me2SnCl2, and SnCl4 in THF respectively afforded LAl(mu-S)2SnPh2 (2), LAl(mu-S)2SnMe2 (3), and LAl(mu-S)2Sn(mu-S)2AlL (4) in moderate yields. Compounds 2, 3, and 4 were characterized by elemental analysis, NMR, electron-impact mass spectrometry, and single-crystal X-ray structural analysis.     

Synthesen und Kristallstrukturen von Dialkylgalliumhydriden — dimere versus trimere Formeleinheiten

Syntheses and Crystal Structures of Dialkylgallium Hydrides — Dimeric versus Trimeric Formula Units Dialkylgallium hydrides (R = Me, Et, iPr, iBu, neopentyl) were obtained on two different synthetic routes. The dimethyl and diethyl compounds were formed by the reaction of LiH with the corresponding dialkylgallium chlorides via lithium dialkyldihydridogallate intermediates, which so far have not been isolated in a pure form. On the second route, trialkylgallium compounds were treated with [GaH₃·NMe₂Et] to yield the dialkylgallium hydrides by a substituent exchange reaction. The dimethyl, diethyl and diisopropyl compounds are trimeric in solution. That trimeric structure was verified for the diisopropyl derivative by a crystal structure determination. Di(neopentyl)gallium hydride has a dimeric structure in solution and in the solid state.     

Brønsted acidic ionic liquids and their zwitterions: synthesis, characterization and pKa determination

Imidazolium chlorides with one or two carboxylic acid substituent groups, 1-methyl-3-alkylcarboxylic acid imidazolium chloride, [Me[(CH2)nCOOH]im]Cl (n=1, 3), and 1,3-dialkylcarboxylic acid imidazolium chloride, [[(CH2)nCOOH]2im]Cl (n=1, 3), have been synthesized via their corresponding acid esters. Deprotonation of the carboxylic acid functionalized imidazolium chlorides with triethylamine affords the corresponding zwitterions [Me[(CH2)nCOO]im] (n=1, 3) and [[(CH2)nCOOH][(CH2)nCOO]im] (n=1, 3). Subsequent reaction of the zwitterions with strong acids gives the new imidazolium salts [Me[(CH2)nCOOH]im]X (n=1, 3; X=BF4, CF3SO3) and [[(CH2)nCOOH]2im]X (n=1, 3; X=BF4, CF3SO3), which exhibit melting points as low as -61 degrees C. The solid-state structures of two of the carboxylic acid functionalized imidazolium salts have been determined by single-crystal X-ray diffraction analysis. Extensive hydrogen bonding is present between the chloride and the imidazolium, with eight Cl.H interactions below 3 A. The pK(a) values of all the salts, determined by potentiometric titration, lie between 1.33 and 4.59 at 25 degrees C.     

Synthetic applications of (Me3SiNSN)2E (E = S, Se) in chalcogen-nitrogen chemistry: formation and structural characterization of Cl2TeESN2 (E = S, Se) and [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, Br)

The reaction of (Me3SiNSN)2S with TeCl4 in CH2Cl2 affords Cl2TeS2N2 (1) and that of (Me3SiNSN)2Se with TeCl4 produces Cl2TeSeSN2 (2) in good yields. The products were characterized by X-ray crystallography, as well as by NMR and vibrational spectroscopy and EI mass spectrometry. The Raman spectra were assigned by utilizing DFT molecular orbital calculations. The pathway of the formation of five-membered Cl2TeESN2 rings by the reactions of (Me3SiNSN)2E with TeCl4 (E = S, Se) is discussed. The reaction of (Me3SiNSN)2Se with [PPh4]2[Pd2X6] yields [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, 4a; Br, 4b), the first examples of complexes of the (Se2N2S)2- ligand. In both cases, this ligand bridges the two palladium centers through the selenium atoms.     

Aluminacyclopropene: syntheses, characterization, and reactivity toward terminal alkynes

Reactions of LAl with ethyne, mono- and disubstituted alkynes, and diyne to aluminacyclopropene LAl[eta2-C2(R1)(R2)] ((L = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3); R1 = R2 = H, (1); R1 = H, R2 = Ph, (2); R1 = R2 = Me, (3); R1 = SiMe3, R2 = C[triple bond]CSiMe3, (4)) are reported. Compounds 1 and 2 were obtained in equimolar quantities of the starting materials at low temperature. The amount of C2H2 was controlled by removing an excess of C2H2 in the range from -78 to -50 degrees C. Compound 4 can be alternatively prepared by the substitution reaction of LAl[eta2-C2(SiMe3)2] with Me3SiC[triple bond]CC[triple bond]CSiMe3 or by the reductive coupling reaction of LAlI2 with potassium in the presence of Me3SiC[triple bond]CC[triple bond]CSiMe3. The reaction of LAl with excess C2H2 and PhC[triple bond]CH (<1:2) afforded the respective alkenylalkynylaluminum compounds LAl(CH=CH2)(C[triple bond]CH) (5) and LAl(CH=CHPh)(C[triple bond]CPh) (6). The reaction of LAl(eta2-C2Ph2) with C2H2 and PhC[triple bond]CH yielded LAl(CPh=CHPh)(C[triple bond]CH) (7) and LAl(CPh=CHPh)(C[triple bond]CPh) (8), respectively. Rationally, the formation of 5 (or 6) may proceed through the corresponding precursor 1 (or 2). The theoretical studies based on DFT calculations show that an interaction between the Al(I) center and the C[triple bond]C unit needs almost no activation energy. Within the AlC2 ring the computational Al-C bond order of ca. 1 suggests an Al-C sigma bond and therefore less pi electron delocalization over the AlC2 ring. The computed Al-eta2-C2 bond dissociation energies (155-82.6 kJ/mol) indicate a remarkable reactivity of aluminacyclopropene species. Finally, the 1H NMR spectroscopy monitored reaction of LAl(eta2-C2Ph2) and PhC[triple bond]CH in toluene-d8 may reveal an acetylenic hydrogen migration process.     

A New Class of Aluminum Cations Based upon Tetradentate (N(2)O(2)) Chelating Ligands

Herein are described the synthesis and characterization of the complexes of formula LAlR (where R = Cl and L = Salen (1), SalenCl (2), Acen (3) and where R = Me and L = Salen (4), SalenCl (5), Acen (6); Salen = N,N'-ethylenebis((2-hydroxyphenyl)methylimine), SalenCl = N,N'-ethylenebis((2-hydroxy-5-chlorophenyl)methylimine), Acen = N,N'-ethylenebis((2-hydroxyphenyl)-1-ethylimine)). The LAlCl derivatives dissolve in water and MeOH to yield the cationic complexes [LAl(H(2)O)(2)](+)Cl(-) (L = Salen (7), SalenCl (8), Acen (9)) and [LAl(MeOH)(2)](+)Cl(-) (L = Salen (10), SalenCl (11), Acen (12)), respectively. An alternative preparation of the cationic species involves the reaction of the LAlCl derivative with NaBPh(4). This leads to complexes of formula [LAl(MeOH)(2)](+)BPh(4)(-) (L = Salen (13), SalenCl (14), Acen (15)). Complexes 4-6 can be reacted with either MeOH or 4-chloro-3,5-dimethylphenol (Ph') to form complexes of general formula LAlOR (R = Me, L = Salen (16), SalenCl (17), Acen (18); R = Ph', L = Salen (19), SalenCl (20), Acen (21)). All of the compounds were characterized by IR, melting points, elemental analyses, and, when soluble, NMR. Additionally, the crystal structures of 7, 13, 15, and 18 were obtained.     

Synthesis, structural characterization, catalytic properties, and theoretical study of compounds containing an Al-O-M (M = Ti, Hf) core

Two single oxygen-bridged heterobimetallic oxides of Al(III) with group 4 metals (Ti, Hf) have been prepared. The reaction of LAlMeOH (1) [L = CH(N(Ar)(CMe))2, Ar = 2,6-iPr2C6H3] with dimethylmetallocenes of Ti and Hf in toluene (80 degrees C) and ether (room temperature), respectively, resulted in the formation of LAl(Me)(mu-O)M(Me)Cp2 [M = Ti (2), Hf (3)] in moderate to good yield. Compounds 2 and 3 were characterized by elemental analysis, IR, NMR (1H and 13C), EI-MS, and single-crystal X-ray structural analysis. Furthermore, compound 2 showed good catalytic activity in ethylene and styrene homopolymerization, while compound 3 is less active in ethylene polymerization. The styrene polymerization yields atactic polystyrene.     

Synthesis,structure, and reactivity of some N-phosphorylphosphoranimines

A large series of new N-phosphorylphosphoranimines that bear potentially reactive functional groups on both phosphorus centers were prepared by silicon-nitrogen bond cleavage reactions of N-silylphosphoranimines. Thus, treatment of the N-silylphosphoranimines, Me(3)SiN=P(Me)(R)X (R = Me, Ph; X = OCH(2)CF(3) and R = Me, X = OPh), with phosphoryl chlorides, RP(=O)Cl(2) (R' = Cl, Me, Ph), readily afforded the corresponding N-phosphoryl derivatives, R'P(=O)(Cl)-N=P(Me)(R)X, in high yields. Subsequent reaction with 1 or 2 equiv of the silylamine, Me(3)SiNMe(2), resulted in ligand exchange at the phosphoryl (P=O) group to give the P-dimethylamino analogues, R'P(=O)(NMe(2))N=P(Me)(R)X (R' = Cl, NMe(2), Me, Ph; R = Me, Ph; X = OCH(2)CF(3), OPh). These new N-phosphorylphosphoranimines (and one thiophosphoryl analogue) were obtained as thermally stable, distillable liquids and were characterized by NMR ((1)H, (13)C, and (31)P) spectroscopy and elemental analysis. One member of the series, Cl(2)P(=O)N=P(Me)(Ph)OCH(2)CF(3) (4), was also studied by single-crystal X-ray diffraction which revealed that the formal P(O)-N single bond [1.55(1) A] is shorter than the formal N=PR(2)X double bond [1.60(1) A]. Such structural features are compared to those of similar compounds and discussed in relationship to the unexpected thermolysis pathways observed for these N-phosphorylphosphoranimines, none of which produced poly(phosphazenes).     

Synthesis and structures of [[HC(CMeNAr)(2)]Ge(S)X] (Ar = 2,6-iPr(2)C(6)H(3), X = F,Cl, Me): structurally characterized examples with a formal double bond between group 14 and 16 elements bearing a halide

Treatment of [{HC(CMeNAr)2}GeX] (Ar = 2,6-iPr2C6H3, X = Cl (1), F (2)), with elemental sulfur at room temperature smoothly afforded the [{HC(CMeNAr)2}Ge(S)X] (X = Cl (3), F (4)). Compound 4 can also be obtained from 3 with the fluorination reagent Me3SnF. Reaction of 3 with MeLi led to the formation of [{HC(CMeNAr)2}Ge(S)Me] (5). Single-crystal X-ray structural analyses indicate compounds 3-5 are monomeric. The germanium centers adopt four coordinated sites and reside in distorted tetrahedral environment. Compounds 3 and 4 are structurally characterized examples with a formal double bond between group 14 and 16 elements bearing a halide.     

Stabilization of low valent silicon fluorides in the coordination sphere of transition metals

Silicon(II) fluoride is unstable; therefore, isolation of the stable species is highly challenging and was not successful during the last 45 years. SiF(2) is generally generated in the gas phase at very high temperatures (~1100-1200 °C) and low pressures and readily disproportionates or polymerizes. We accomplished the syntheses of stable silicon(II) fluoride species by coordination of silicon(II) to transition metal carbonyls. Silicon(II) fluoride compounds L(F)Si·M(CO)(5) {M = Cr (4), Mo (5), W(6)} (L = PhC(NtBu)(2)) were prepared by metathesis reaction from the corresponding chloride with Me(3)SnF. However, the chloride derivatives L(Cl)Si·M(CO)(5) {M = Cr (1), Mo (2), W(3)} (L = PhC(NtBu)(2)) were prepared by the treatment of transition metal carbonyls with L(Cl)Si. Direct fluorination of L(Cl)Si with Me(3)SnF resulted in oxidative addition products. Compounds 4-6 are stable at ambient temperature under an inert atmosphere of nitrogen. Compounds 4-6 were characterized by NMR spectroscopy, EI-MS spectrometry, and elemental analysis. The molecular structures of 4 and 6 were unambiguously established by single-crystal X-ray diffraction. Compounds 4 and 6 are the first structurally characterized fluorides, after the discovery of SiF(2) about four and a half decades ago.     

Trialkylboron/lanthanide metallocene hydride chemistry: polydentate bridging of (HBEt3)- to lanthanum

The reaction of [(C(5)Me(5))(2)LaH](x) with BEt(3) is reported, and the solid-state structures of the lanthanum product (C(5)Me(5))(2)La[(mu-H)(mu-Et)(2)BEt], 1, and its THF adduct (C(5)Me(5))(2)La(THF)[(mu-H)(mu-Et)BEt(2)], 2, are compared with that of the hydride-bridged "tuckover" complex (C(5)Me(5))(2)La(mu-H)(mu-eta(1):eta(5)-CH(2)C(5)Me(4))La(C(5)Me(5)), 3.