含胺基功能性单体的聚合研究——ⅩⅦ.N-(4-二甲氨基苯基)马来酰亚胺的聚合及其光化学行为

关于在同一分子中既含有给电子生色基团又含有受电子碳碳双键基的单体的合成、聚合及它们的光化学行为,我们所报道过的多是一元不饱和羧酸的衍生物。本文报道含有给电子生色基因的1,2-不饱和二元羧酸类单体N-(4-二甲氨基苯基)马来酰亚胺(DMAPMI)的合成、聚合及其光化学行为。     

N-(对甲苯基)马来酰亚胺的自由自聚合与光敏诱导聚合及共聚合

N-烷基与N-芳基马来酰亚胺,是属于1,2-二取代乙烯结构的单体,文献[1—3]报道这类单体能进行自由基聚合与共聚合。但对于N-(对甲苯基)马来酰亚胺(PMPMI)的自由基聚合与共聚合中,溶剂对聚合物分子量的影响尚未有详细报道。至于N-烷基与N-芳基马来酰亚胺分别和丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)的共聚合也有一些报道,由竞聚率的测定,计算出N-芳基马来酰亚胶的e值是2.12—2.29和1.35—1.75。表明N-芳基马来酰亚胺是一缺电子的单体,即负性单体。我们研究室曾报道N,N-二甲基-对甲苯胺(DMT)和其它芳胺能光诱导引发负性单体丙烯腈聚合。PMP-     

N-[4-(N′-取代酰胺基)苯基]马来酰亚胺的合成与表征

N-取代马来酰亚胺(RMI)是一类重要的新型树脂改性单体,由于其具有刚性五元环的结构,能显著提高聚合物的玻璃化温度和热分解温度,改善材料的工艺性和力学性能[1-9]。但文献对于在N-取代基团中引入杂环结构的单体合成报道很少。本文报道了由顺丁烯二酸酐、8-氨基喹啉、对甲苯胺为主要原料合成N-[4-(N′-8-喹林基)苯甲酰胺基]马来酰亚胺(QPM)和N-[4-(N′-4-甲基苯基)苯甲酰胺基]马来酰亚胺(TPM)的方法,并对产物进行了元素分析和1H-NMR、FT-IR表征。同时,由于8-氨基喹啉具有与8-羟基喹啉类似的结构,能表现出较好的光学性能[10,11],以N…     

N-[4-(N''''-取代酰胺基)苯基]马来酰亚胺的合成与表征

N-取代马来酰亚胺(RMI)是一类重要的新型树脂改性单体，由于其具有刚性五元环的结构，能显著提高聚合物的玻璃化温度和热分解温度，改善材料的工艺性和力学性能。但文献对于在N-取代基团中引入杂环结构的单体合成报道很少。本文报道了由顺丁烯二酸酐、8-氨基喹啉、对甲苯胺为主要原料合成N-[4-(N’-8-喹林基)苯甲酰胺基]马来酰亚胺(QPM)和N-[4-(N’-4-甲基苯基)苯甲酰胺基]马来酰亚胺(TPM)的方法，     

氯乙烯/N-取代马来酰亚胺共聚竞聚率及共聚物组成

研究了氯乙烯(VC)与多种N-取代马来酰亚胺的溶液共聚合,求得各对单体的竞聚率.结果表明,各种马来酰亚胺的竞聚率都远高于VC的竞聚率,即N-取代马来酰亚胺单体的活性均比VC单体活性高.计算得到N-取代马来酰亚胺Q和e值.由于苯环的共轭效应,N-苯基及N-取代苯基马来酰亚胺具有较大的Q值.各对单体的e值差别较大,表明有形成交替共聚物的倾向.此外,还考察了聚合过程中共聚物组成的变化,用递推法预测了这类体系共聚物瞬时和累积组成随转化率的变化.     

乙烯基单体/N-取代马来酰亚胺共聚合动力学

详细研究了聚合温度、引发剂用量、单体配比对苯乙烯(St)/N-苯基马来酰亚胺(PMI)共聚合动力学的影响.对St、甲基丙烯酸甲酯(MMA)和丙烯腈(AN)等单一或混合单体与PMI、N-环己基马来酰亚胺(ChMI)和N-邻氯苯基马来酰亚胺(o-CPMI)的共聚合进行了研究,并讨论了单体结构的影响.     

N-（p-羟基苯基）甲基丙烯酰胺的合成与表征

N-芳基取代的甲基丙烯酰胺(结构式如图1所示)是一类非常有用的共聚单体,它们可以与甲基丙烯酸酯或N-取代马来酰亚胺等单体共聚,使共聚物的一些性能,如耐热性、耐水性、透明度、硬度等都有不同程度的改进[1-4].关于N-芳基取代的甲基丙烯酰胺的制备,文献[5-8]曾有报道,通常采用甲基丙烯酰氯与芳基胺在乙醚、苯等溶剂中反应,并加入适当的缚酸剂来完成.而N-(p-羟基苯基)甲基丙烯酰胺(此处R＝OH)是N-芳基取代甲基丙烯酰胺中一种比较特殊的单体,它即含有碳碳双键,又含有酚羟基,属于双官能团物质.关于它的制备及用途,尚未见有文献报道.文献[5]曾报道说,采用对胺基苯酚与甲基丙烯酰氯反应仅能得到甲基丙烯酸(N-(p-甲基丙烯酰胺基)苯酚酯(即酰胺-酯化合物).本文合成出了这种物质,并对其进行了表征和证实;我们推测它与一些单体(如N-取代马来酰亚胺等)的共聚物可以溶于碱性水溶液,并且有好的耐热性,因此在紫外光刻胶中可能有比较大的应用潜力[9-11],有关这方面的内容我们将另文报道.     

N-甲基丙烯酰-N′-嘧啶基哌嗪及其聚合物敏化的丙烯腈光聚合

我们曾报道过同一分子中含有给电子生色基团和电子受体基团的一类功能性单体,如甲基丙烯酸-4-N,N-二甲氨基苄酯(DMABMA),N-(4-N′,N′-二甲氨基苯基代丙烯酰胺,N-(4-N′、N′)-二甲氨基苯基代甲基丙烯酰胺(DMAPMA),8-丙烯酰氧喹啉(AQ),N-丙烯酰-N′-苯基哌嗪(APP)的合成、聚合以及单独或与过氧化二酰构成氧化还原体系以引发烯类单体的聚合研究。N-甲基丙烯酰-N′-嘧啶基哌嗪(MPMP)     

N-(2-乙烯氧乙基)-1,8-萘二甲酰亚胺聚合物与共聚物的荧光行为

<正> 我们曾报道过一系列含有给电子生色基团的丙烯酰类单体如甲基丙烯酸二甲氨基苄酯、N-(N′,N′-二甲氨基苯基)丙烯酰胺类、8-丙烯酰氧喹啉类、N-丙烯酰-N′-苯基哌嗪类、N-丙烯酰-N′-嘧啶哌嗪类、N-甲基丙烯酰氧乙基-N-甲基代苯胺等的合成、聚合、引发行为以及它们的聚合物的荧光行为。这些单体结构的共同点在于其双键为缺电子性而生色基团为给电子性,因而在荧光行为上,由于生成激基复合物或电荷转移而发生荧光     

N-取代基马来酰亚胺均聚合研究进展

N-取代基马来酰亚胺聚合物具有良好的热性能,近些年来随着材料性能的要求提高,对这类单体的研究也越来越多,本论文综述了N-取代基马来酰亚胺在自由基、阴离子聚合、配位聚合等方面的均聚合研究进展。     

光致酸发生剂——对甲基苯磺酸三苯基硫盐的合成

以二苯亚砜为起始反应物,通过改进反应溶剂,首先合成了溴化三苯基硫盐,大大缩短了反应时间,提高了该盐的反应收率.再运用银盐置换法,合成了光致酸发生剂——对甲基苯磺酸三苯基硫盐,并对其进行了红外和核磁共振表征.     

Synthesis and characterization of a novel liquid‐crystalline epoxy resin combining biphenyl and aromatic ester‐type mesogenic units

A novel liquid‐crystalline epoxy resin combining biphenyl and aromatic ester‐type mesogenic units, diglycidyl ether of 4,4′‐bis(4‐hydroxybenzoyloxy)‐3,3′,5,5′‐tetramethyl biphenyl, was synthesized. Its spectroscopic structure, thermal properties, and phase structures were investigated with NMR, differential scanning calorimetry (DSC), and polarized light microscopy (PLM), respectively. The curing agent, diaminodiphenylsulfone, was chosen to investigate the curing behavior by means of DSC and PLM during isothermal and nonisothermal processes. Only one exothermal peak appeared in the isothermal DSC curves. Birefringence was also observed during the curing processes and preserved after postcuring. Compared with short rigid‐rod and flexible epoxies, the cured liquid‐crystalline epoxy resin that was obtained displayed special thermal stability according to thermogravimetric analysis because of its long rigid‐rod mesogenic unit and bulky methyl groups. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 727–735, 2007     

反式-4,4’-二（邻甲氧基苯乙烯基）联苯化合物的合成、结构及光物理性能

以Wittig-Homer反应合成了反式对称的4,4’-二(邻甲氧基苯乙烯基)联苯化合物, X射线衍射分析测定了化合物的晶体结构. 测定了其在不同溶剂中的线性吸收光谱、荧光发射光谱及荧光量子产率. 飞秒激光做光源研究了化合物的双光子光物理性能. 测试结果表明: 该化合物在蓝光波段有较强的荧光发射, 化合物具有较高的荧光量子产率和较大的双光子吸收截面, 具有双光子诱导蓝光发射光学特性.     

Template synthesis of [2]rotaxanes with large ring components and tris(biphenyl)methyl group as the blocking group. The relationship between the ring size and the stability of the rotaxanes

We synthesized a series of macrocyclic phenanthrolines 3a-e and a tris(biphenyl)methyl derivative 4. [2]Rotaxanes with large ring components (10a,b) were synthesized by the template method, and the stability of the rotaxanes was examined. The study revealed that the tris(biphenyl)methyl group is an effective blocking group for the rotaxanes with up to a 33-membered ring. Even a rotaxane with a 37-membered macrocyclic phenanthroline (10b) could be isolated. The dissociation of 10b occurred at 60 degrees C.     

Synthesis and Characterization of Poly(Aryl Ether-Bissulfone)s

A series of poly(aryl ether-bissulfone)s were synthesized from bis-phenols, 4,4′-bis(4-chlorophenylsulfonyl)biphenyl, and 4,4′-bis(4-fluorophenylsulfonyl)biphenyl. The bishalide monomers were synthesized by reaction of 4,4′-bis(chlorosulfonyl)biphenyl with a suitable aryl halide. Potassium carbonate mediated reaction in di-methylacetamide gave high molecular weight polymers in excellent yield. The polymers are soluble in dipolar aprotic solvents. Unlike the corresponding monosulfone analogues, the poly(aryl ether-bissulfone)s exhibited poor solubility in chlorinated hydrocarbons. The glass transition temperatures of the polymers are among the highest known for poly(aryl ether)s (241-271 °C). In addition, the polymers exhibit excellent thermal stability and they produce clear, colorless tough films by solution casting or compression molding.     

1—酰基—4—氯环己烷与取代芳烃的区域与立体选择性反应

从环己烯合成了１－酰基－４－氯环己烷，发现在其在ＡｌＣｌ３催化与苯，氯苯，溴苯等优先生成反式１－芳基－４－酰基环己烷，与联苯反应时选择性较差。     

Synthesis of alkyl biphenyl-4-carboxylates by reaction of biphenyl with carbon tetrachloride and alcohols in the presence of Fe<Subscript>2</Subscript>(CO)<Subscript>9</Subscript>

Alkyl biphenyl-4-carboxylates have been synthesized with high selectivity by multicomponent reaction of biphenyl with carbon tetrachloride and aliphatic alcohols in the presence of iron-containing catalysts.     

Distinct electronic structures and bonding interactions in inverse-sandwich samarium and ytterbium biphenyl complexes

Inverse-sandwich samarium and ytterbium biphenyl complexes were synthesized by the reduction of their trivalent halide precursors with potassium graphite in the presence of biphenyl. While the samarium complex had a similar structure as previously reported rare earth metal biphenyl complexes, with the two samarium ions bound to the same phenyl ring, the ytterbium counterpart adopted a different structure, with the two ytterbium ions bound to different phenyl rings. Upon the addition of crown ether to encapsulate the potassium ions, the inverse-sandwich samarium biphenyl structure remained intact; however, the ytterbium biphenyl structure fell apart with the concomitant formation of a divalent ytterbium crown ether complex and potassium biphenylide. Spectroscopic and computational studies were performed to gain insight into the electronic structures and bonding interactions of these samarium and ytterbium biphenyl complexes. While the ytterbium ions were found to be divalent with a 4f¹⁴ electron configuration and form a primarily ionic bonding interaction with biphenyl dianion, the samarium ions were in the trivalent state with a 4f⁵ electron configuration and mainly utilized the 5d orbitals to form a δ-type bonding interaction with the π* orbitals of the biphenyl tetraanion, showing covalent character.

Inverse-sandwich samarium and ytterbium biphenyl complexes were synthesized and characterized by X-ray crystallography. Combined experimental and computational studies indicated that they have distinct electronic structures and bonding interactions.     

Synthesis of Novel Biphenyltetrazole Derivatives Containing 5‐Methylisoxazole Substituted 1,2,4‐Triazole

An efficient route to synthesize the target compounds was developed. Fifteen new 5‐[4′‐(5‐isoxazol‐4‐aryl‐1,2,4‐triazol‐3‐yl‐sulfanylmethyl)‐biphenyl‐2‐yl]‐tetrazoles derivatives were synthesized. The structures of the new compounds synthesized were confirmed by elemental analyses and spectral data.     

Liquid crystalline comb-like polyimides with biphenyl-based side groups

We have synthesized series of comb-like polyimides with mesogenic units in their side groups. Such comb-like polyimides were obtained by polycondensation of aromatic diamines bearing biphenyl-based mesogenic moieties with bicyclo[2,2,2]oct-7-ene 2,3,5,6-tetracarboxylic dianhydride (BCDA). The different diamines, with two lengths of spacer (with 6 and 11 methylene groups), were synthesized in three steps using as mesogenic groups: biphenyl, 4-cyanobiphenyl and 4-(2-methyl-1-butoxy)biphenyl. The synthesis of the polyimides was performed in two steps: polycondensation of a dianhydride with a diamine in N-methyl-2-pyrrolidone at room temperature giving the corresponding polyamic acid, followed by thermal cyclization into the corresponding polyimide. The comb-like polyimides were studied by X-ray diffraction between room temperature and 250°C. Two types of smectic structure were established: SmA₁ for the long spacer and SmC₁ for the short spacer.