B,N-SnO2/TiO2光催化剂的制备及其光催化性能研究

为了提高TiO₂在可见光下的光催化活性, 采用聚合物前驱体法制备了B,N共掺杂的SnO₂/TiO₂(B,N-SnO₂/TiO₂)粉体型光催化剂. 进一步为了提高光催化剂的实用性, 通过浸渍-裂解法制备了氧化铝纤维毡负载的B,N-SnO₂/TiO₂光催化剂. 利用X射线衍射仪、场发射扫描电子显微镜、场发射透射电子显微镜、X射线光电子能谱、比表面积分析仪、紫外-可见分光光度计等对其进行了表征. 以氧氟沙星水溶液为模拟污染物, 考察了B,N-SnO₂/TiO₂粉体型光催化剂和负载型光催化剂的可见光催化活性及稳定性. 结果表明, 该粉体型光催化剂在可见光下光照15 min, 对氧氟沙星的降解率可达98.3%. 负载型光催化剂也表现出了良好的光催化性能及可重复性和稳定性, 在21次重复使用后光催化性能几乎不发生变化.     

TiO2光催化还原CO2

光催化还原CO₂技术在CO₂的治理与利用方面有着潜在的应用价值和良好的开发前景。该文简要综述了近年来用于光催化还原CO₂反应的TiO₂光催化剂材料,包括纯TiO₂催化剂、负载型TiO₂催化剂、金属改性TiO₂催化剂、半导体复合TiO₂催化剂和有机光敏化TiO₂催化剂等,并介绍了各类催化剂光催化还原CO₂的反应性能。     

低量La3+掺杂S-TiO2光催化剂的制备、表征及其光催化活性

采用溶胶-凝胶-浸渍法制备了La³⁺/S-TiO₂纳米光催化剂,通过XRD、BET、XPS、UV-Vis等手段进行了表征.以甲基橙溶液为光催化降解反应的模型化合物,考察了光催化剂的活性,探讨了低量La³⁺掺杂对TiO₂纳米粒子光催化活性的影响机制.实验结果表明:S改性TiO₂后明显提高了TiO₂纳米粒子的光催化活性,而La³⁺掺杂S-TiO₂后,进一步提高了TiO₂纳米粒子的光催化活性,La³⁺的最佳掺杂量(相对于TiO₂的质量分数)为0.369%;La³⁺/S-TiO₂(ω(La³⁺)=0.369%)为纳米光催化剂时,甲基橙的脱色率达到92.4%(光照120min);XRD和BET分析表明,低量La³⁺掺杂抑制了TiO₂由锐钛矿向金红石的转变,阻碍了TiO₂晶粒的生长,提高了TiO₂的比表面积;XPS分析表明,S、La³⁺掺杂可以导致粉体的表面羟基含量增加,掺杂S以S⁶⁺形式置换TiO₂晶格中的Ti⁴⁺;UV-Vis分析表明,光催化剂La³⁺/S-TiO₂比纯TiO₂具有较强的紫外光吸收性能.与纯TiO₂相比,La³⁺掺杂TiO₂纳米粒子光催化氧化活性的提高应归因于La³⁺掺杂增加了表面羟基含量,增大了比表面积,增强了样品表面的紫外光吸收能力.     

CeO2/TiO2光催化剂的制备及其可见光脱氮性能

采用溶胶-凝胶和浸渍掺杂两步法合成了CeO₂/TiO₂光催化剂,并对催化剂的理化结构进行表征分析;以吡啶-正辛烷体系为模拟油品氮源,研究了该催化剂在可见光作用下的光催化脱氮行为,并探究了光催化脱氮的最佳反应条件。 结果表明,掺杂的铈主要以CeO₂的形式存在,且增强了催化剂在可见光区的吸收;在可见光辐照150 min的条件下,铈的掺杂量质量分数为8%,所制备的CeO₂/TiO₂催化剂投入量为1.0 g/L时,模拟油品中吡啶的脱氮率高达76.45%。     

Fe掺杂与天然沸石载体对TiO2光催化活性的影响

以具有多孔结构的天然斜发沸石为载体, FeCl₃和TiCl₄为前驱物制备铁离子掺杂TiO₂光催化剂. 分别在紫外光和太阳光照射下, 研究了Fe-TiO₂, TiO₂/沸石和Fe-TiO₂/沸石对甲基橙溶液(MO)的光催化分解过程, 并通过XRD, AFM, FTIR和吸收光谱等手段, 探讨了Fe和沸石对TiO2的光催化活性的影响. 结果表明, 适当浓度的Fe不仅可以提高TiO₂的光催化效率, 而且能够拓展TiO₂的吸收波长范围至可见光区. 而沸石的引入不仅提高了光催化剂的效率, 而且也增强了光催化剂的抗失活性能.     

掺杂WO3的SiO2/TiO2的溶胶热液合成及光催化性能

采用溶胶-热液合成法制备了掺杂WO₃的SiO₂/TiO₂复合光催化剂,用X射线衍射、红外光谱、Zeta电位分析、BET和透射电镜对样品进行了表征,并以甲基橙降解评价了其光催化性能.结果表明:改性后的光催化剂表现出较高的光催化性能,WO₃和SiO₂不仅增加了锐钛矿TiO₂的稳定性,并阻止了TiO₂晶粒的聚集生长.     

模拟太阳光下稀土Gd掺杂TiO2纳米晶的光催化性能研究

以甲基橙的光催化降解为探针反应,采用氙灯模拟自然条件下的太阳光,评价了通过酸催化的溶胶-凝胶法制备的稀土Gd掺杂改性TiO₂纳米晶的光催化活性及对甲基橙水溶液TOC的去除效果.运用XRD和UV-Vis DRS表征技术考察了Gd掺杂对纳米TiO₂的微晶尺寸、晶体结构与光学性能的影响.结果表明,Gd掺杂可以抑制TiO₂由锐钛矿相向金红石相的转变,阻碍TiO₂晶粒增长,使TiO₂的光吸收带边发生蓝移且有利于对可见光的吸收,从而使Gd掺杂TiO₂在模拟太阳光下光催化降解甲基橙的能力得到明显提高,但样品对甲基橙水溶液TOC的去除效果要滞后于其对色度的去除.     

铋掺杂介孔二氧化钛的制备及光催化动力学

以介孔分子筛(KIT-6)为载体,采用溶液浸渍法合成了铋(Bi)掺杂的介孔二氧化钛(TiO₂)光催化剂。利用XRD、TEM、SEM、XPS、N₂吸附-脱附法和拉曼光谱法等技术手段对材料的结构和形貌进行表征。通过紫外-可见吸收光谱法考察了催化剂对罗丹明B光催化降解效率,进一步考察了Bi的掺杂量对光催化反应速率的影响,并对光催化降解动力学进行了初步研究。结果表明,Bi掺杂的介孔TiO₂具有较窄的孔径分布(3~4 nm),而且吸收范围扩展到可见光区,其光催化活性明显高于商品TiO₂(P25)。随之Bi掺杂量的提高,反应速率常数也增大,其光催化降解罗丹明B的反应均符合准一级动力学方程。     

可见光响应纳米TiO2光催化薄膜的研究进展

综述了近几年国内外可见光响应纳米TiO₂薄膜制备的研究现状,阐述了TiO₂薄膜光催化降解有机物的催化机理,系统地介绍了提高纳米TiO₂吸收波长的方法、常用载体、可见光响应纳米TiO₂薄膜制备方法和在降解有机物方面的应用,并概述了其以后的发展趋势.     

胶体碳球制备新型Sn/Se共掺杂TiO2及其光催化性能

TiO₂的光催化性能改性是水污染治理和光催化领域研究的重点方向。为了增强TiO₂的光催化性能,以胶体碳球为模板,采用水热-煅烧法首次制备了TiO₂空心球、硒掺杂二氧化钛(Se-TiO₂)空心球和锡/硒共掺杂二氧化钛(Sn/Se-TiO₂)空心球。同时,对Sn/Se-TiO₂空心球的形貌、结构以及元素组成进行了表征,并以罗丹明B为模拟污染物,评价了样品的光催化性能。结果表明：TiO₂为单一的锐钛矿相,Sn和Se成功地掺杂进入了TiO₂晶格中;Sn/Se共掺杂形成了缺陷能级,降低了禁带宽度和电子-空穴对的复合几率,提高了可见光的响应范围。当Se掺杂2.0%(物质的量分数,下同),Sn掺杂0.5%时,样品光催化性能最好,去除率为76.92%。同等条件下空心球的光催化去除率：TiO₂22,说明Sn/Se共掺杂T...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.