CO2开关型溶剂、溶质及表面活性剂*

CO₂诱导的开关型溶剂、溶质及表面活性剂是指在通入和排出CO₂后,其溶液性质能发生可逆变化的新型溶剂、溶质及表面活性剂,是典型的环境刺激响应型智能化合物。本文综述了CO₂诱导的开关型溶剂、溶质及表面活性剂的结构、性能及研究进展,并指出了这些开关型溶剂、溶质及表面活性剂的发展方向及应用前景等。     

木糖醇在纯水和碱金属卤化物水溶液中的稀释焓

应用等温流动微量热法测定了298.15 K时木糖醇在纯水和碱金属卤化物水溶液中的稀释焓, 根据McMillan- Mayer理论计算了木糖醇在溶液中的二到四阶焓相互作用系数. 结果表明, 木糖醇在碱金属卤盐溶液中的焓对相互作用系数h₂均为正值, h₂值随着碱金属阳离子或卤素阴离子半径的增大皆依次增大. 根据木糖醇参与的溶质-溶质, 溶质-溶剂等弱相互作用, 对该种多元醇在碱金属卤盐水溶液中的焓相互作用系数的变化进行了解释.     

阴离子磺酸盐型Gemini表面活性剂与PEO-PPO-PEO嵌段共聚物相互作用的研究

用差示扫描微量热、等温滴定微量量热、动态光散射和核磁共振(NOESY,弛豫时间)技术,研究了在pH＝9时阴离子磺酸盐型Gemini表面活性剂12-3-12(SO₃)₂与PEO-PPO-PEO嵌段共聚物F127 (EO₉₇PO₆₉EO₉₇)和P123 (EO₂₀PO₇₀EO₂₀)之间的相互作用. 研究发现,随着12-3-12(SO₃)₂浓度的增大,聚合物的临界胶束温度(CMT)降低. 与传统的单链离子表面活性剂相比,12-3-12(SO₃)₂具有更强的降低共聚物CMT的能力. 此外,在低于聚合物的CMT时,12-3-12(SO₃)₂与聚合物单体可以形成聚合物/表面活性剂胶束聚集体;在高于聚合物的CMT时,12-3-12(SO₃)₂的加入首先与聚合物单体和胶束的混合物或聚合物胶束形成聚合物/12-3-12(SO₃)₂混合胶束,然后随着12-3-12(SO₃)₂浓度的增大,混合胶束逐步解离为小的聚集体,但是,即使在很高的12-3-12(SO₃)₂浓度时,混合胶束也未完全解离.     

正离子Gemini表面活性剂/负离子聚电解质相互作用的研究

摘要 采用荧光探针法和电导法研究了正离子偶联表面活性剂(C₁₂H₂₅(CH₃)₂N-(CH₂)₆-N(CH₃)₂C₁₂H₂₅•2Br) (12-6-12• 2Br^－)和带相反电荷聚电解质聚丙烯酸钠(NaPA)的相互作用, 结果表明: 由于静电相互作用, 12-6-12•2Br^－和NaPA之间可以形成类胶束或复合物. 对比十二烷基三甲基溴化铵(DTMAB)与NaPA复配体系的荧光光谱, 发现偶联表面活性剂与NaPA的相互作用强于传统表面活性剂. 此外, 还研究了盐和醇对偶联表面活性剂/聚丙烯酸钠的复配体系微极性的影响, 发现盐和醇对表面活性剂在聚电解质上形成类胶束和复合物的溶解都有一定的促进作用.     

聚合物与表面活性剂相互作用的分子模拟研究进展

聚合物与表面活性剂复配体系已广泛应用于医药、生物、石油石化等领域。从微观上认识其相互作用机理对指导其生产实际有着重要作用,因而此方面的研究倍受关注。随着分子模拟技术的发展,聚合物与表面活性剂在分子水平上的相互作用机理研究已经被广泛开展,并获得了大量有用的信息。本文综述了耗散粒子动力学(DPD)和粗粒度分子动力学(CG-MD)在聚合物与表面活性剂相互作用方面的应用,分别对中性聚合物与离子型表面活性剂,以及带相反电荷的聚电解质和表面活性剂在溶液相和界面相的相互作用进行了阐述,并揭示了聚合物/表面活性剂聚集体结构形态的变化规律。     

Sn(MSA)2电镀液体系表面活性剂性能优化的模拟研究

在本工作中,我们利用粗粒化分子动力学(MD)模拟方法,研究了两亲性表面活性剂构型及浓度对Sn(MSA)₂类电镀液体相溶液与铜基板周围电镀液微观结构的影响,从分子水平系统考察了主盐离子、表面活性剂与甲醛添加剂的分布和聚集情况,及其与铜基板的相互作用.研究表明,A₄B₁₂型表面活性剂的疏水链段(A₄)协同效应较强,易在溶液中形成胶束,在基板上吸附能力有限;A₂B₁₂A₂疏水链较短,B₆A₄B₆疏水链居中,该两种表面活性剂在溶液中难以聚集,易充分吸附于基板之上;(AB₃)₄型表面活性剂在体相溶液中充分分散,在基板上的吸附能力有限.A₂B₁₂A₂及B₆A₄B₆型表面活性剂的充分吸附,有助于金属离子及甲醛添...     

混合表面活性剂在非极性溶剂中的聚集行为

表面活性剂在非极性溶剂中的聚集行为比在水溶液中复杂得多. 水溶液中表面活性剂有一明确的临界胶束浓度(CMC),而在非极性溶剂中至今对CM C概念仍有怀疑^[1], 但已有多种手段如染料增溶法、水增溶法、光散射法、荧光偏振、紫外和核磁共振谱等证实并测定了非极性溶剂中 CMC 的存在^[1～5]. 表面活性剂在非极性溶剂中以非离子化状态存在, 其缔合主要靠两亲分子之间的偶极-偶极以及离子对相互作用, 那么在一种表面活性剂溶液中加入另一种表面活性剂, 即表面活性剂的复配, 必然对其聚集行为产生重大影响, 但迄今为止, 尚未见关于混合表面活性剂在非极性溶剂中聚集行为的报道. 本文采用碘光谱法和水增溶法测定了阴离子表面活性剂AOT 和非离子表面活性剂 Brij30 混合后在正庚烷中形成反胶束的 CMC, 以期考察表面活性剂的复配对其聚集行为的影响。     

超临界二氧化碳中亚胺类共价有机骨架材料COF-LZU1的合成与表征

研究了超临界流体技术在共价有机骨架材料（COF）合成中的应用,以均苯三甲醛和对苯二胺为原料,N,N-二甲基甲酰胺为共溶剂,醋酸为催化剂,在超临界二氧化碳（scCO₂）中合成了亚胺类共价有机骨架材料COF-LZU1.考察了共溶剂、反应温度、反应压力、反应时间、醋酸含量和反应物摩尔比对COF-LZU1材料的晶体结构和微观形貌的影响.实验结果表明,反应温度的升高有利于提高scCO₂的传质速率及增加反应物在scCO₂中的溶解度,从而促进反应的进行;反应时间的延长有利于晶体的成熟和结晶度的提高;醋酸不仅是反应催化剂,还具有形貌导向剂的作用,通过改变醋酸用量分别获得了球状、块状和棒状形貌的COF-LZU1;反应物中对苯二胺含量过高会干扰反应过程中醛基与氨基的有序结合,导致结晶度的降低以及形貌规整程度的下降.在反应温度为60℃,反应压力为20 MPa,反应时间为6 h,均苯三甲醛与对苯二胺摩尔比为1：1.5,醋酸（3 mol/L）与N,N-二甲基甲酰胺体积比为1：1的条件下,制备的COF-LZU1呈现截面直径为80 nm的纳米棒形貌,具有良好的结晶度和优异的热稳定性,热分解温度高达550℃.本文首次在超临界环境中制备了COFs材料,为COFs的绿色合成提供了新途径.     

基于壳聚糖二氧化碳智能材料

二氧化碳(CO₂)捕获以及转化是控制大气中二氧化碳含量和有效利用的主要策略。CO₂ 响应型聚合物以含有胺基的烯类单体为主要原料,通过接枝聚合或与其他功能分子复合来改善其对CO₂的响应以及捕获性能。其中,天然高分子(如多糖、蛋白质等)具有资源丰富、无毒、可降解和良好的生物相容性等优点,是制备环境友好高分子材料的最佳选择。同时,壳聚糖含有大量的伯胺,在制备基于胺基的具有CO₂响应以及捕获性能的智能复合材料中具有潜在优势。本文首先介绍了CO₂响应聚合物和壳聚糖的特点,进一步归纳了近年来基于壳聚糖的CO₂响应高分子以及捕获材料的最新研究进展,并对这类复合材料的设计及其应用前景进行了展望。     

高温高矿化度条件下驱油剂中聚合物分子结构形态及其在中低渗油层中的渗流特性

利用动态光散射(DLS)、电镜扫描(SEM)和岩心驱替实验等方法, 对高温高矿化度条件下聚合物溶液和“聚合 物/表面活性剂”二元复合驱油体系中聚合物分子线团尺寸及其影响因素和在中低渗油藏环境下的渗流特性进行了实验研究, 并对其渗流规律进行了机理分析. 结果表明, 在高温高矿化度条件下, 随聚合物浓度增加, 聚合物溶液和“聚合物/表面活性剂”二元复合驱油体系中聚合物分子线团尺寸D_h都呈现“先增大后减小”的变化规律. 非离子型表面活性剂以胶束聚集体形式吸附在聚合物分子链上, 造成二元复合驱油体系中聚合物分子线团尺寸D_h大于聚合物溶液. 在溶剂水矿化度较高和岩心渗透率较低条件下, 后续注入水的冲刷和稀释作用造成岩心内滞留聚合物浓度降低, 聚合物分子线团尺寸D_h增加, 最终导致聚合物溶液和“聚合物/表面活性剂”复合体系的残余阻力系数大于阻力系数.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.