Graphite gasification in high-temperature gas flows containing H<Subscript>2</Subscript>O and CO<Subscript>2</Subscript>

The rates of graphite gasification in interaction with high-temperature gas flows were compared. Carbon dioxide and a mixture of water vapor and argon taken in a 1:1 molar ratio were used as reagents. The reactor was a tube furnace; its temperature was varied from 1250 to 1400 K. The rates of graphite gasification in CO₂ and water vapor-argon mixture flows were approximately equal at 1250–1300 K, whereas, at 1350–1400 K, the water vapor-argon mixture exhibited higher reactivity than CO₂. The data obtained were approximated by Arrhenius dependences; the activation energy was found to be 153 kJ/mol for CO₂ and 248 kJ/mol for H₂O-Ar.     

Methane sensor based on SnO<Subscript>2</Subscript>/In<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> nanostructure

Two sets of samples of SnO₂/In₂O₃/TiO₂ system have been fabricated with different concentrations of component materials. In the first set TiO₂ with rutile structure was used, while in the second set it has the structure of anatase. Thin films (up to 50 nm) of obtained mixtures were deposited. Their sensitivity and selectivity with respect to methane (CH4) were studied. Nanostructure on the basis of 70%SnO₂ — 10%In₂O₃ — 20%TiO₂(anatase) exhibits sufficient sensitivity to methane.     

Phonon linewidths in YNi<Subscript>2</Subscript>B<Subscript>2</Subscript>C

Phonons in a metal interact with conduction electrons which give rise to a finite linewidth. In the normal state, this leads to a Lorentzian shape of the phonon line. Density functional theory is able to predict the phonon linewidths as a function of wave vector for each branch of the phonon dispersion. An experimental verification of such predictions is feasible only for compounds with very strong electron-phonon coupling. YN₂B₂C was chosen as a test example because it is a conventional superconductor with a fairly high T _c (15.2 K). Inelastic neutron scattering experiments did largely confirm the theoretical predictions. Moreover, they revealed a strong temperature dependence of the linewidths of some phonons with particularly strong electron-phonon coupling which can as yet only qualitatively be accounted for by theory. For such phonons, marked changes of the phonon frequencies and linewidths were observed from room temperature down to 15 K. Further changes were observed on entering into the superconducting state. These changes can, however, not be described simply by a change of the phonon linewidth.      

Electrical and optical characterization of pulsed plasma of N<Subscript>2</Subscript>–H<Subscript>2</Subscript>

This paper considers the electrical and optical characterization of glow discharge pulsed plasma in N₂/H₂ gas mixtures at a pressures range between 0.5 and 4.0 Torr and discharge current between 0.2 and 0.6 A. Electron temperature and ion density measurements were performed employing a double Langmuir probe. They were found to increase rapidly as the H₂ percentage in the mixture was increased up to 20%. This increase slows down as the H₂ percentage in the gas mixture was increased above 20% at the same pressure. Emission spectroscopy was employed to observe emission from the pulsed plasma of a steady-state electric discharge. The discharge mainly emits within the range 280–500 nm. The emission consists of N₂ (C-X) 316, 336, 358 nm narrow peaks and a broad band with a maximum at λ_max = 427 nm. Also lines of N₂, N₂ ⁺ and NH excited states were observed. All lines and bands have their maximum intensity at the discharge current of 0.417 A. The intensities of the main bands and spectral lines are determined as functions of the total pressure and discharge current. Agreement with other theoretical and experimental groups was established.     

Magnetic phases in UNi<Subscript>2</Subscript>Si<Subscript>2</Subscript>

The tetragonal compound UNi₂Si₂ exhibits in zero magnetic field three different antiferromagnetic phases belowT _N =124 K. They are formed by ferromagnetic basal planes, which are antiferromagnetically coupled along thec-axis with the propagation vectorq=(0, 0, q _z ). Two additional order-order magnetic phase transitions are observed below T _N , namely atT ₁=108 K and T ₂=40 K in zero magnetic field. All three phases exhibit strong uniaxial anisotropy confining the U moments to a direction parallel to the c-axis. UNi₂Si₂ single crystals were studied in detail by measuring bulk thermodynamic properties, such as thermal expansion, resistivity, susceptibility, and specific heat. A microscopic study using neutron diffraction was performed in magnetic fields up to 14.5 T parallel to the c-axis, and a complex magnetic phase diagram has been determined. Here, we present the analysis of specific-heat data measured in magnetic fields up to 14 T compared with the results of the neutron-diffraction study and with other thermodynamic properties of UNi₂Si₂.     

High‐resolution stimulated Raman spectroscopy and analysis of the ν1, 2ν1–ν1, ν2, 2ν2, and 3ν2–ν2 bands of CF4

The spectra of the ν₁, 2ν₁–ν₁, ν₂, 2ν₂, and 3ν₂–ν₂ bands of CF₄ were obtained with a quasi‐continuous wave stimulated Raman spectrometer. These five bands were studied at a temperature of 135 and 300 K (for the hot bands). The spectrum of ν₁ was obtained at a sample pressure of 2 mbar. For the spectra of the other regions, which are much weaker, higher pressures were used. The analysis has been performed thanks to the xtds and spview softwares developed in Dijon for such highly symmetric molecules. Combining the present results with a previous infrared study, we could determine a very accurate value for the C–F equilibrium bond length, i.e. r_e = 1.31588(6) Å. Copyright © 2013 John Wiley & Sons, Ltd.     

Tunable bluish green to yellowish green Ca<Subscript>2(1-x)</Subscript>Sr<Subscript>2x</Subscript>Al<Subscript>2</Subscript>SiO<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphors for potential LED application

A series of solid solutions with a general formula of Ca_2(1-x)Sr_2xAl₂SiO₇:Eu²⁺ were synthesized by a high temperature solid state reaction. The structure, diffuse reflection spectra, photoluminescence spectra, color-coordinate parameters and lifetimes of phosphors were investigated. XRD results show that Ca₂Al₂SiO₇ is totally miscible with Sr₂Al₂SiO₇. These solid solution phosphors show a broad excitation band of 350–450 nm that matches well with the output lights of near-UV LEDs and tunable emission from bluish green to yellowish green. These optical properties originate from the 4f⁷–4f⁶5d transition of Eu²⁺ ions. The crystal field strength was considered to be tailed by controlling the host composition, which leads to the shift of absorption band and emission band, and the varying of color coordinates. PACS  78.55.-m; 42.70.-a; 61.05.C-     

Luminescent properties of SrMg<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript> as a potential phosphor for ultraviolet light-emitting diodes

Eu²⁺ and Mn²⁺ co-doped SrMg₂(PO₄)₂ phosphors with blue and red two emission bands were prepared by the high temperature solid state method and their luminescent properties have been investigated as a function of activator and co-activator concentrations. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the Eu²⁺ emission spectrum and the excitation spectrum of Mn²⁺. Efficiencies of energy transfer were also calculated according to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission. According to the principle of energy transfer, we demonstrated that the phosphor SrMg₂(PO₄)₂:Eu²⁺,Mn²⁺ with double emission bands exhibited a great potential as a phosphor for ultraviolet light-emitting diodes and the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺. PACS 78.55.-m     

Thermodynamic and elastic properties of AgInSe<Subscript>2</Subscript> and AgInTe<Subscript>2</Subscript>

The specific heat at constant volume as a function of temperature, the elastic constants, compressibility coefficients, and bulk moduli of AgInSe₂ and AgInTe₂ crystals with a chalcopyrite structure have been calculated in terms of the density functional theory using the pseudopotential method. A comparison of the calculated specific heat for the tellurium compound with the results of measurements has demonstrated good agreement between theory and experiment. The bulk moduli of the AgInSe₂ and AgInTe₂ crystals calculated from first principles (60.4 and 50.1 GPa, respectively) somewhat exceed the results available in the literature, which were obtained earlier from approximate semiempirical formulas.     

Electronic structure of FeSi<Subscript>2</Subscript>

The electronic structure of volume and film iron disilicides with crystal structure of the type of α leboit and fluorite was calculated using the linearized augmented plane-wave formalism. Joint and local partial densities of electronic states, x-ray emission spectra in different series of all inequivalent atoms of these phases, and photoelectron spectra for different excitation energies were obtained. γ-FeSi₂ was found to be, unlike α-FeSi₂, an unstable phase in both the volume and film realizations. X-ray L _2,3 emission spectra of silicon in the iron group disilicides NiSi₂, CoSi₂, and FeSi₂ were compared. NiSi₂, CoSi₂, and α-FeSi₂ exhibit transformation of the maximum in the near-Fermi region of the Si L _2,3 spectra as one crosses over from a bulk to a film sample. This transformation is closely connected with phase stability and may serve as a criterion of thermodynamic stability of the iron-group transition-metal disilicides.     

Semiconducting SnO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> (S-T) composites for detection of SO<Subscript>2</Subscript> gas

SnO₂-TiO₂ (S-T) composites with different molar ratios were prepared by mechanical mixing followed by sintering at 700 °C for 4 h in air. The structural and microstructural properties of the composites were investigated using powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). S-T composites were investigated by introducing SO₂ to test their chemical stability using PXRD and SEM coupled with energy dispersive X-ray (EDX) analysis. The sensing performance was measured at different temperatures using various SO₂ concentrations (10–100 ppm). A composite comprising 25 mol% of SnO₂ and 75 mol% TiO₂ (S25-T75) exhibited the highest sensitivity comparing to other S-T composites studied under the presently investigated conditions. t ₉₀ (90 % of response time) was found to be ～5 min for thick pellet (~2 mm in thickness). SO₂ sensing mechanism has been explained through the band structure model.     

Magnetic properties of Pb<Subscript>2</Subscript>Fe<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>9</Subscript> single crystals

Single crystals of Pb₂Fe₂Ge₂O₉ have been grown. They were subjected to X-ray diffraction, magnetic, neutron diffraction, Mössbauer and spin resonance studies. It has been established that Pb₂Fe₂Ge₂O₉ is a weak ferromagnet with a Néel temperature T _N = 46 K, and the exchange and spin-flop transition fields have been estimated. It has been demonstrated that the weak ferromagnetic moment is actually the result of the single-ion anisotropy axes for the magnetic moments of different magnetic sublattices being not collinear.     

The effect of anodising time on the electrochemical behaviour of the Ti/TiO<Subscript>2</Subscript> NTs/IrO<Subscript>2</Subscript>-RuO<Subscript>2</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> anode

Nowadays, mixed metal oxide (MMO) anodes are a superior alternative to lead alloys in electrowinning processes. Passivation of titanium substrate is the most common mechanism of deactivation in these anodes. In this research, titanium oxide nanotubes have been utilised as an interlayer between the substrate and a mixed metal oxide coating in order to improve the anode electrochemical behaviour and life via retardation of titanium passivation. Anodising of the substrate was done in 0.5 wt% hydrofluoric acid for 30, 60 and 240 min. The samples were subsequently coated with a coating composed of IrO₂-RuO₂-Ta₂O₅. The microstructure of different samples was observed by scanning with an electron microscope, and the electrochemical behaviour of the samples was studied by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. The studies showed that formation of titanium oxide nanotubes with anodising times of 60 and 240 min increases the life of the anode through the provision of a compact coating. The life of the anode which was anodised for 240 min lasted about 20% longer than the sample which had a substrate without any anodised layer.     

Spectral and kinetic characteristics of CdI<Subscript>2</Subscript> and CdI<Subscript>2</Subscript>:Pb scintillators

We have studied the effect of lead dopant on the optical absorption, photoluminescence, and x-ray luminescence spectra, and the scintillation characteristics of CdI₂ at room temperature. The crystals for the study were grown by the Stockbarger-Bridgman method. Activation of CdI₂ from the melt by the compound PbI₂ leads to the appearance in the absorption spectra in the near-edge region of an activator band at 395–405 nm, which is interpreted as an A band connected with electronic transitions from the ¹S₀ state to the ³P₁ levels in the Pb²⁺ ion. For x-ray excitation, CdI₂:Pb²⁺ crystals with optimal dopant concentration (∼1.0 mol%) are characterized by a light yield with maximum in the 570–580 nm region that is an order of magnitude higher than for CdI₂ crystals in the 490–500 nm band. For α excitation, the radioluminescence kinetics for cadmium iodide is characterized by a very short (∼0.3 nsec) rise time and fast decay of luminescence, with τ₁ ≈ 4 nsec and τ₂ = 10–76 nsec. Depending on the conditions under which the crystals were obtained, the fast component fraction is 95%–99%. The crystal is characterized by a similar scintillation pulse in the case of excitation by x-ray pulses. The radioluminescence pulse shape for CdI₂:Pb in the decay stage is predominantly exponential, with luminescence decay time constants τ₁ ≈ 10 nsec and τ₂ = 200–250 nsec. This system is characterized by low afterglow, at the level for the Bi₄G₃O₁₂ scintillator. We have demonstrated the feasibility of using CdI₂:Pb as a scintillator for detecting α particles. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 6, pp. 825–830, November–December, 2008.     

The Urbach tails and optical absorption in layered semiconductor TlGaSe<Subscript>2</Subscript> and TlGaS<Subscript>2</Subscript> single crystals

TlGaSe₂ and TlGaS₂ single crystals were grown by the modified Bridgman-Stockbarger method. We report the result of an experimental study of the optical absorption of TlGaSe₂ and TlGaS₂ crystals. The absorption measurements were performed in steps of 10 K. The direct and indirect band gaps for TlGaSe₂ and TlGaS₂ samples were calculated as a function of temperature. The phonon energies in TlGaSe₂ and TlGaS₂ crystals were calculated as (39±4) and (9±4) meV at 240 K, respectively. At 10 K, direct and indirect band gaps were found as 2.294 and 2.148 eV for TlGaSe₂, 2.547 and 2.521 eV for TlGaS₂ crystals, respectively. The abrupt changes were observed in the direct and indirect band gaps in the some temperature ranges. These changes were interpreted as phase transformation temperatures. The steepness parameters and Urbach energy for TlGaSe₂ and TlGaS₂ samples increased with increasing sample temperature in the range (10–320) K.     

Structural and vibrational analyses of 2‐(2‐benzofuranyl)‐2‐imidazoline

We have studied 2‐(2‐benzofuranyl)‐2‐imidazoline (BFI) and characterized it by using infrared and Raman spectroscopies. The density functional theory (DFT) method together with Pople's basis set shows that two conformers exist for the title molecule as have been theoretically determined in the gas phase and that, probably, an average of both conformations is present in the solid phase. The harmonic vibrational wavenumbers for the optimized geometry of the latter conformer were calculated at the B3LYP/6‐31G* level in the proximity of the isolated molecule. For a complete assignment of the IR and Raman spectra in the compound in the solid phase, DFT calculations were combined with Pulay's scaled quantum mechanics force field (SQMFF) methodology in order to fit the theoretical wavenumbers to the experimental ones. Copyright © 2010 John Wiley & Sons, Ltd.     

Prussian blue modified FePt nanoparticles for the electrochemical reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

FePt nanoparticles were synthesized by polyol process with chloride salts, and the equiatomic composition was surface modified with prussian blue (PB). From the magnetic studies, the fraction of PB present in the surface-modified fcc-FePt was found to be 18 %. The FePt nanoparticles with an average particle size of 5 nm forms cluster like morphology, which were embedded in the PB matrix. The electrocatalytic reduction of hydrogen peroxide (H₂O₂) by the PB-modified FePt nanoparticles was studied. The reduction peak current showed linear response for H₂O₂ in the concentration range up to 3.5 mM. The FePt nanoparticles did not exhibit significant H₂O₂ reduction whereas the PB-modified FePt showed reduction of H₂O₂ with the addition of 0.35 mM of H₂O₂.     

Low-temperature Raman spectra of Hg<Subscript>2</Subscript>(Br,I)<Subscript>2</Subscript> mixed crystals

Raman spectra of Hg₂(Br,I)₂ mixed crystals were studied. The spectra revealed multimode behavior of optical vibrations, which were assigned to the existence in these crystals of molecules of three types, namely, Hg₂Br₂, Hg₂I₂, and Hg₂BrI. The spectra exhibit a manifestation of phase transition effects associated with soft modes, the density of states of IR-active vibrational branches, and of nanoclusters, whose nucleation is induced by the Br-Hg-Hg-I dipole molecules.     

Annealing study of electrodeposited CuInSe<Subscript>2</Subscript> and CuInS<Subscript>2</Subscript> thin films

In this study CuInSe₂ and CuInS₂ thin films were prepared onto ITO glass substrate using the electrodeposition technique in aqueous solution. The electrodeposited films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis. The annealing effects on electrodeposited precursors were investigated. The chalcopyrite structure of CuInSe₂/CuInS₂ showed an enhancement of crystallinity after subsequent selenization/sulfurization treatment in Se/S atmosphere, respectively. XRD and SEM studies revealed a dramatic improvement of the crystalline quality of CIS films after annealing treatments. Mott–Schottky measurements were used to assess the conductivity type of the films and their carrier concentration. The prepared samples underwent an etching process to remove the binary accumulated Cu_2?x(Se,S) phases shown in FESEM pictures. This etching process has shown a noticeable decrease in both, the flat band potential, V_fb (V), and the number of acceptors, N_A (cm^?3) in selenized CuInSe₂ and sulfurized CuInS₂ samples.     

Gas sensor based on nanosize In<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> film

Nanosize films of In₂O₃:Ga₂O₃ (96:4 weight %) have been deposited on a glassceramic substrate by the method of rf magnetron sputtering. The surfaces of fabricated films were studied with use of a scanning electron microscope; sizes of grains were determined and the thicknesses of films were measured. In order to prepare a gas-sensitive structure, a thin catalytic palladium layer and ohmic comb contacts were deposited on the In₂O₃:Ga₂O₃ film surface by the method of ion-plasma sputtering. The sensitivity of sensors based on the glassceramic/In₂O₃:Ga₂O₃ (96:4 weight %)/Pd structure to different concentrations of propane and butane gas mixture, as well as to methane was investigated at temperatures of working substance from 250 to 300°C.