TiO_2/活性炭纤维复合材料去除室内挥发性有机物的研究进展

多孔材料与纳米TiO2复合是目前光催化领域的研究热点。多孔材料作为吸附中心可为TiO2光催化剂提供高浓度反应环境,加快催化剂传质速率,提高催化剂矿化效率,抑制催化剂失活,解决催化剂分离难题;TiO2作为降解中心可实现多孔材料的原位再生,增加其平衡吸附量,从而实现对室内挥发性有机物(VOCs)污染的高效深度净化。本文就TiO2/活性炭纤维(ACF)复合材料的制备方法、TiO2/ACF去除VOCs的环境影响因素及协同作用机制进行了综述,并对今后的研究提出了展望。     

纳米二氧化钛/碳纳米管复合催化剂光催化性能及碳纳米管组分的作用

运用溶胶-凝胶及低温水热法合成纳米TiO₂/碳纳米管复合催化剂, 以甲基橙为目标降解物考察复合物的光催化活性. 运用X光衍射、透射电镜、Brunauer-Emmett-Teller低温氮气吸附、差热-热重分析及紫外-可见漫反射吸收光谱等表征催化剂. 结果表明, 与单纯纳米TiO₂相比, 溶胶-凝胶法制备的复合催化剂的光催化活性显著提高, 实验条件下复合的碳纳米管最适含量为3%(碳纳米管/TiO₂, 重量百分比), 复合催化剂经在缓和氧化气氛中焙烧处理可在保持碳纳米管热稳定前提下获得纳米TiO₂的充分晶化. 观察到了低温水热合成的复合催化剂的甲基橙降解活性的进一步提升, 复合催化剂中纳米TiO₂在碳纳米管表面分散均匀, TiO₂和碳纳米管组分间的紧密和充分键合及低温水热条件下催化剂的大比表面积、超细粒径以及碳纳米管的热稳定等有利于复合催化剂的光催化活性. 进一步地, 探讨了复合催化剂中适量碳纳米管组分的光活性促活机制.     

TiO2改性的镁基中温吸附剂及其CO2吸附性能的研究

采用沉淀法合成一系列TiO₂改性的镁基吸附剂,利用XRD、SEM和氮气吸附等方法对吸附剂进行表征,通过变温吸附-脱附动态循环实验考察其CO₂吸附性能。随着TiO₂含量的增加,样品的结晶度逐渐下降,同时由于焙烧后生成钛酸镁,样品比表面积逐渐减小。当TiO₂添加量为2%(质量分数),此时吸附剂呈直径为4.0~5.0μm的球形,局部为纳米片状结构,该吸附剂自第二次循环开始吸附能力无明显变化;经过50次变温吸附脱附循环实验后,动态吸附容量可达6.64%(质量分数),这是由于TiO₂改性后生成的钛酸镁为该吸附剂提供了刚性骨架,促进了活性组分的分散,并提高了吸附剂的稳定性。     

制备方法对MnOx鄄TiO2吸附剂脱汞及抗硫性能的影响

针对燃煤烟气中单质汞(Hg⁰)不溶于水很难去除和锰基吸附剂抗硫能力差的问题,以浸渍法、溶胶鄄凝胶法和沉积鄄沉淀法等三种方法制备MnO_x 鄄TiO₂ 为吸附剂,在固定床实验台架上考察了制备方法对MnO_x 鄄TiO₂ 吸附剂Hg⁰ 吸附量和抗硫性能的影响;利用N₂ 吸附/ 脱附、TG鄄DSC、XRD、TEM、H2鄄TPR 和XPS 等手段对吸附剂进行表征。结果表明,制备方法对MnO_x 鄄TiO₂ 吸附剂的脱汞活性影响颇大;沉积鄄沉淀法制备的MnO_x 鄄TiO₂ 吸附剂具有较高的Hg0 吸附量和抗硫能力。吸附剂的BET 比表面积高低与其脱汞活性无直接相关性;与浸渍法和溶胶鄄凝胶法相比,沉积鄄沉淀法制备的MnO_x 鄄TiO₂ 吸附剂不但可以增强其还原性和MnO_x分散度,而且还会显著提高吸附剂表面Mn⁴⁺/Mn 的比率和表面化学吸附态氧含量,进而增强吸附剂的脱汞活性和抗硫性能。     

TiO2/石墨烯复合材料的光生电荷分离调控与光催化产氢性能研究

半导体光生电荷分离是光催化过程中的关键步骤之一,其效率极大地影响了最终光催化性能.将TiO₂纳米片与石墨烯复合,能够促进TiO₂中光生电子和空穴的分离,从而提高其光催化活性.为了研究光生电荷的分离对TiO₂/石墨烯复合材料光催化性能的影响,通过调控TiO₂纳米片的尺寸来调节TiO₂/石墨烯复合材料中光生电荷分离的能力,然后研究其对TiO₂/石墨烯复合材料光催化性能的影响.合成了一系列不同厚度的TiO₂纳米片,将其与石墨烯复合,并通过光沉积负载Pt纳米颗粒作为助催化剂,用于光催化产氢.实验结果显示,随着TiO₂纳米片厚度减小,其与石墨烯形成的复合结构的光催化性能显著提高.这主要是由于TiO₂纳米片厚度减小时,光生电子沿厚度方向穿过TiO₂纳米片迁移到石墨烯的距离缩短,从而减少了光生电子在迁移过程中与空穴的复合;同时TiO₂纳米片厚度减小使其比表面积增大,使得TiO₂/石墨烯界面面积增大,从而使石墨烯更好地分离出TiO₂中的光生电子,有更多的光生电子到达石墨烯参与催化反应,提高TiO₂/石墨烯复合材料的光催化性能.此研究表明通过控制TiO₂纳米片的尺寸来调控TiO₂/石墨烯复合材料中光生电子和空穴的分离,是显著提高其光催化性能的有效途径.     

明胶对纳米二氧化钛相变和光催化活性的影响

以明胶为分散剂采用溶胶-凝胶法制备了纳米晶TiO₂粉末.通过XRD、TG-DTA、AFM、N₂吸附-解吸等手段,考察了明胶对TiO₂煅烧过程中相变和平均粒径的影响;用光催化降解甲基橙检测了明胶用量对样品光催化活性的影响.结果表明:明胶的存在抑制了TiO₂由无定形向锐钛矿的相变,降低了锐钛矿向金红石的相变温度;同时,TiO₂纳米晶的平均粒径也随明胶用量的增加而减小.600℃煅烧样品的光催化活性随明胶用量的增加而提高;800℃煅烧样品在m_G:m_TBOT(明胶与钛酸四丁酯的质量比)=1:8时,具有最高的光催化活性.     

Li+掺杂纳米TiO2的制备及其光催化性能研究

采用溶胶-凝胶法和浸渍法制备了Li⁺掺杂纳米TiO₂光催化剂,并用XRD和TEM等技术进行了表征;用pH值漂移法测量了催化剂的零电位pH值(pHpzc).结果表明,500℃煅烧制得的催化剂均为锐钛矿相;Li⁺的掺杂抑制了TiO₂粒子的生长,提高了催化剂的分散性;催化剂的零电位pH值为6.6—8.1,其值取决于Li⁺的浓度和掺杂方式.分别以紫外光和太阳光为光源,孔雀石绿和甲基橙为降解物评价了催化剂的光催化活性;并用气相色谱测试了污染物降解产生的CO₂的含量.结果显示,对孔雀石绿的降解,浸渍法和溶胶-凝胶法掺Li⁺都能有效提高TiO₂的光催化活性,但浸渍法比溶胶-凝胶法效果更好,催化活性最高的为浸渍法制备的5%(摩尔分数)Li⁺掺杂TiO₂,其在紫外光和太阳光下的光催化活性分别比纯TiO₂提高了6—8倍和9—10倍;对甲基橙的降解,除溶胶-凝胶法制备的3%(摩尔分数)Li⁺掺杂TiO₂能稍提高光催化活性外,其它Li⁺的掺杂都不同程度降低了TiO₂的光催化活性;随污染物降解率的增加,最终降解产物CO₂的含量增加.实验结果表明,Li⁺掺杂改变了催化剂表面的电荷状态从而改变了催化剂的零电位pH值是造成催化剂降解不同污染物具有不同催化活性的主要原因.     

TiO2/ACF的制备及光催化降解四氯乙烯性能

以钛酸四丁酯为前驱物,活性炭纤维(ACF)为载体,蔗糖为胶粘剂,采用真空吸附水解的方法制得了TiO₂/ACF催化剂.采用BET、XRD、SEM等手段对其物理化学特性进行表征,以四氯乙烯光降解反应为探针反应,考察了TiO₂/ACF催化剂的光催化降解性能.实验结果表明,采用真空吸附水解法可以将TiO₂很好地负载到活性炭纤维表面上.通过优化条件制备的TiO₂/ACF催化剂在光照2h条件下,可以将水中溶解量的四氯乙烯降解90%以上.催化剂可以多次循环使用,光催化反应活性不变.     

Zn-TiO2/AC复合催化剂的制备及其光催化活性

以硝酸锌、钛酸四丁酯和活性炭为原料,采用真空吸附法制备了不同组成的Zn TiO₂/AC.通过X射线衍射(XRD)和透射电镜(TEM)对催化剂进行了表征.选择较难降解的Cl₃CCOOH作为探针分子考察了其光催化活性.结果表明,掺锌能提高TiO₂/AC的催化活性,当Zn的摩尔分数为0.5%(相对TiO₂)、处理温度为400℃,溶液的pH值为6时,Zn TiO₂/AC催化剂具有很好的光催化活性.     

三维网状Dy3+:YVO4/TiO2复合纤维的制备及光催化产氢性能

以电纺TiO₂纳米纤维为基质, 柠檬酸为软模板, 采用一步水热法制备了具有三维立体网状结构的稀土Dy ³⁺掺杂YVO₄/TiO₂复合纤维. 通过X射线衍射、 扫描电子显微镜、 X射线光电子能谱、 N₂吸附-脱附、 紫外-可见漫反射光谱及荧光光谱等手段对材料的组成、 表面形貌和性能进行表征, 以光分解水产氢实验考察其光催化活性. 结果表明, Dy ³⁺∶YVO₄纳米枝与TiO₂纳米纤维相互交联构筑的纳米纤维网具有大比表面积, 可提供更多活性位点, 改善了多相光催化反应的传递过程; 稀土Dy ³⁺掺杂的YVO₄与TiO₂复合形成异质结相互促进, 在拓宽光谱响应范围、 提高太阳光利用率的同时使光生电子-空穴对得到较好分离, 从而提高了样品的光催化活性. 模拟太阳光照射下, Dy ³⁺∶YVO₄/TiO₂复合纤维光催化产氢速率达到8.63 mmol· h ^-1·g ^-1, 是纯TiO₂纳米纤维的10倍.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.