离子液体催化CO_2和环氧化合物的研究进展

离子液体是一类新型的催化CO_2环加成反应的催化剂,因其具有结构可设计性、催化活性高、绿色高效等优点而被广泛应用于催化合成环状碳酸酯.本文主要综述了近几年来各种常规型离子液体及功能化离子液体对CO_2和环氧化合物反应的催化性能的研究进展,其中常规型离子液体主要有咪唑类、季铵盐、季鏻盐、吡啶类等离子液体,而功能化离子液体包括氨基功能化、羟基功能化、羧基功能化、氨基酸类等离子液体.同时对各类离子液体催化CO_2与环氧化合物合成环状碳酸酯的研究中存在的问题进行了分析,并对其应用前景进行了展望.     

离子液体的量化计算及分子动力学模拟研究进展

离子液体是由有机阳离子和无机/有机阴离子构成的盐类,一般在室温或接近于室温下呈液态,因此常被称为室温离子液体(RTIL).依据不同的划分标准,离子液体有多种分类方式:根据年代的不同可将离子液体分为第一代、第二代及第三代离子液体,例如:烷基咪唑和烷基吡啶的金属卤化物盐等[1];根据阳离子的不同可将离子液体分为季鏻     

动态与信息

迈向绿色格氏化学的第一步英国Columbia Simon Fraser大学的J.A.C.Clyburne等发现鏻基室温离子液体对于包括格氏试剂和其他强碱在内的反应,是一种环境友好的反应介质。研究者指出,四癸基(三己基)氯化鏻和相关的离子液体能够支持包括格氏试剂、N-杂环卡宾和某些氢化物在内的反应     

二苯基二乙基季镂盐及二苯基二苄基季镂盐与取代芳醛的相转移催化Wittig反应

众所周知,三苯基型稳定季鏻盐的 Wittig反应具有 Z-式选择性,其 PTC-Wittig 反应亦具有 Z-式选择性,三苯基型半稳定季鏻盐的 Wittig 反应的立体选择性较差,其产物的Z/E 约为1∶1～1∶1.5。我们曾报道二苯基烯丙基型半稳定季鏻盐与芳醛的 PTC-Wit-     

非常规有机化学反应介质简介

基于绿色化学理念,简要介绍了水、超临界流体、离子液体、氟相介质等作为非常规有机化学反应介质的研究进展.     

离子液体催化CO2与环氧化物合成环状碳酸酯

综述了离子液体催化CO2与环氧化物的环加成反应制备环状碳酸酯的研究进展。目前报道的离子液体主要包括咪唑盐、季铵盐、季鏻盐等。对比了传统离子液体与功能化离子液体对CO2环加成反应的催化活性、选择性以及催化作用机制。与传统的离子液体相比,功能化离子液体的羟基或羧基等官能团与卤素离子等Lewis碱之间存在协同效应,使得其对CO2与环氧化物的环加成反应具有更好的催化活性;将功能化离子液体固载于无机材料(SiO2,SBA-15,MCM-41等)或聚合物所得的多相催化剂不仅保持了官能团与阴离子之间的协同效应,而且载体与离子液体活性组分之间也显示出协同效应,使得该类催化剂具有很好的催化活性,稳定性好,可以多次重复使用,具有较好的工业化前景,是值得深入研发的一类催化材料。此外,离子液体对于手性环状碳酸酯的合成也具有较好的催化活性和立体选择性。     

离子液体作为微波吸收剂促进苯甲醛与巴比妥酸的缩合反应

离子液体是纯粹由离子组成的液体,通常由二烷基季铵阳离子与四氟硼酸根、六氟磷酸根、卤素负离子等阴离子组成.离子液体具有强极性、低蒸汽压,对无机和有机物具有良好的溶解性以及对绝大部分试剂稳定等一系列特殊性质,常作为反应介质或催化剂用于有机合成中[1,2].     

微波促进离子液体相反应在有机合成中的应用

微波促进离子液体相有机合成技术作为一种新型的绿色化学合成法,引起了人们极大的兴趣。在离子液体中,微波辅助下反应快速、收率高、选择性好、后处理简单,离子液体经简单再生后可多次套用。本文综述了以离子液体为反应介质或催化剂的微波辅助技术在多种类型有机反应中的研究成果,主要包括了环合反应、亲核取代反应、金属复分解反应、酰化反应、重排反应、聚合反应、偶联反应、氧化还原反应和选择性脱溴反应等。     

离子液体中固定化光合细菌催化不对称还原反应的研究

采用苯乙酮为模式底物,选用了3种典型的离子液体作为反应介质系统研究了离子液体与缓冲液构成的均相及两相体系中固定化光合细菌催化不对称还原反应的特性．通过对构建的离子液体反应体系进行条件优化,发现与水相及有机相相比,离子液体作为生物催化反应介质更有利于还原反应的进行,并且离子液体及固定化细胞易回收重复利用．研究结果表明,在...     

季鏻盐/ZnCl2催化合成苄基甲苯

研究了季鏻盐/ZnCl2催化甲苯与氯化苄合成苄基甲苯的反应.较佳反应条件为:季鏻盐9.4 mmol,n(季鏻盐)∶n(氯化苄)=1∶40,于100℃反应5h.在最佳反应条件下,氯化苄转化率近100％,单双苄基甲苯总收率95％.季鏻盐/ZnCl2催化剂可循环使用24次以上.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.