钛基氧化物阳极中间层的研究进展

钛基氧化物阳极是国内外电化学领域应用广泛的优良阳极材料. 为提高电极导电性、延长电极使用寿命、增强钛基体和金属氧化物活性层之间稳定性,可以在钛基体和金属氧化物活性层之间添加氧化物等中间过渡层. 本文评述了钛基氧化物阳极中间层的研究进展,指出了钛基氧化物电极存在的问题,展望了中间层氧化物电极的发展趋势.     

DSA电极电催化性能研究及尚待深入探究的几个问题

钛基氧化物涂层电极(DSA^®)由于其对阳极析氯、阳极析氧、有机污染物电化学降解等具有优异的电催化活性而受到研究者的广泛关注,但DSA电极电催化现象背后的一些重要而基础性的问题仍未被人们完全认识。本文针对目前国内外有关DSA电极电催化研究领域中的几个研究热点、不足之处、以及尚待深入探究的问题,进行了简要介绍、分析和讨论。DSA电极的电催化活性主要是来自于其表面的金属氧化物涂层。本文强调对“氧化物涂层”自身固体物理-化学性能或过程的研究,有助于深入揭示钛基活性氧化物涂层电极电催化现象的微观作用机制和内在本质,并反过来指导人们更加理性地通过设计和优化DSA电极的制备方法和条件,调控表面氧化物涂层的化学组成与结构,进而达到增强钛基涂层电极电催化活性之目的。     

混合金属氧化物阳极在海水中的电化学性能

采用热分解方法制备钛基混合金属氧化物阳极 ,用扫描电镜对阳极涂层显微形貌进行了分析 ,并通过实海模拟试验考察了混合金属氧化物阳极在海水阴极保护系统中的使用性能 .SEM分析结果表明 ,混合金属氧化物阳极涂层呈多孔多裂纹的显微结构 ,与其它阳极材料相比 ,此种阳极具有更大的活性表面积 .电化学试验结果表明 ,混合金属氧化物阳极在海水中具有良好的电化学稳定性和电化学活性 ;此外 ,混合金属氧化物阳极在海水中的消耗率很低 ,属于不溶性的阳极材料 ,作为外加电流阴极保护的辅助阳极具有广泛的应用前景     

镧掺杂对Ti/Sb-SnO2阳极电催化性能影响的研究

元素掺杂是一种有效改善电极性能的手段。为了提高钛基锡系形稳阳极的催化活性,La被作为一种改性剂掺杂在Ti/Sb-SnO2电极的涂层中。掺杂改性后电极涂层的形貌通过SEM及XRD进行了检测;并通过EDS检测了涂层中各元素的组成比例;利用电化学阳极极化曲线(LSV)测试了电极的电化学性能。利用掺杂改性后的电极和未改性电极电解处理模拟对硝基苯酚(p-NP)废水,在相同条件下,掺杂La改性后电极处理废水的降解率为92.8%,远高于未改性电极处理废水的降解率(72%)。实验表明,稀土La改性后的Ti/Sb-SnO2电极在处理p-NP废水的优越性相当明显。     

钕改性钛基SnO2/Sb电催化电极的制备及表征

为改善钛基SnO2／Sb电极的电催化性能,采用浸渍法制备了Nd改性钛基SnO2／Sb电极。以活性艳红X-3B为目标有机物,考察电极的电催化性能,对制备温度和Nd掺杂量进行了研究,确定了适宜的制备条件为：热处理温度550℃,Nd掺杂量1.0％。采用SEN,EDS,XRD及XPS等分析方法对所制备电极的表面形貌、元素组成及结构进行分析,发现掺杂Nd可使SnO2粒径变小,有利于电极电催化性能的改善,同时Nd元素的引入可使杂质元素sb,Nd在电极表面涂层富集。Nd改性钛基SnO2／Sb电极表面主要是四方相金红石结构的SnO2晶体,掺杂的sb和Nd分别以Sb^5＋和Nd^3＋的形式存在。电极动电位扫描测试结果表明,Nd改性钛基SnO2／Sb电极具有较高的阳极析氧电位,有利于有机物的阳极氧化降解。     

铱钽钛金属氧化物阳极的电化学特性

采用热分解方法在钛基体上制备铱钽钛金属氧化物阳极 ,用扫描电镜对阳极涂层显微形貌进行分析 ,通过强化电解寿命试验、开路电位测试、消耗率试验及循环伏安曲线研究了金属氧化物阳极的电化学性能 .SEM分析结果表明铱钽钛金属氧化物阳极涂层呈现多孔多裂纹形貌结构 .随阳极涂层组成不同 ,涂层显微形貌表现出很大差异 ,这种差异直接影响阳极电化学性能 .电化学性能试验结果表明铱钽钛金属氧化物阳极在酸性介质和海水中具有良好的电化学稳定性和电化学活性 .此外 ,铱钽钛金属氧化物阳极在海水中的消耗率很低 ,属于不溶性的阳极材料 ,作为外加电流阴极保护用辅助阳极具有广泛的应用前景 .     

电流型葡萄糖传感器阴极的研究

本文研究了石墨、银、钛基RuO2 /TiO2 涂层材料等几种导电材料取代铂作为葡萄糖传感器阴极的可能性 .结果表明 ,钛基RuO2 /TiO2 涂层电极的化学性质稳定 ,对析氢反应有一定的催化作用 .由石墨_环氧胶粘剂混合物—钛基RuO2 /TiO2 组成的电化学体系可以在 0 .6～ 0 .8V电压范围内检测H2 O2 的稳态氧化电流 ;在 0 .7V电压下 ,以钛基RuO2 /TiO2 涂层材料作为阴极的葡萄糖传感器的性能与以铂片为阴极的传感器性能接近 ,钛基RuO2 /TiO2 涂层材料是取代铂的最佳阴极材料 .     

纳米CeO_2颗粒改性钛基二氧化铅复合电极材料的析氧电催化活性研究

为了提高锌电积用惰性阳极材料钛基二氧化铅在电解锌液中的析氧电催化活性,采用阳极氧化法制备了掺杂纳米CeO_2颗粒改性的钛基二氧化铅复合阳极材料。通过扫描电子显微镜和能谱仪表征电极形貌及元素组成,利用X-射线衍射仪对镀层物相进行分析。利用循环伏安曲线(CV)和交流阻抗(EIS)研究纳米CeO_2添加量对复合阳极材料在电解锌液中的表面粗糙度的影响,并辅以扫描电镜表征了电极材料电催化活性提高的本质原因。结果表明:CeO_2与β-PbO_2-WC复合电沉积能增强析氧电催化活性,当CeO_2含量为16g·L~(-1)时,电极具有最高的表面粗糙度,表面活性点数目最多。由此证实稀土Ce起到孔引发剂的作用,使涂层的有效活性表面积增大,提高电极析氧催化活性。     

新型的钛基Ni-Sn/Ti电极的制备及对甲醇氧化反应的电催化活性

利用电热法,一步制备出新型的钛基Ni-Sn/Ti电极(Ni8Sn/Ti, Ni7Sn3/Ti 和 Ni/Ti)。扫描电镜（SEM）图像表明,催化剂以片状的纳米颗粒形式沉积于钛基体上。利用电化学伏安技术、电位阶跃法和电化学交流阻抗谱（EIS）,研究了这些电极在1mol.L�1NaOH溶液中对甲醇氧化反应的电催化活性。研究表明,与Ni7Sn3/Ti,Ni/Ti以及多晶镍电极相比,Ni8Sn/Ti电极对甲醇氧化反应表现出更高的阳极氧化电流和更低的起始电位。EIS分析表明,在本文所考察的阳极电位和甲醇浓度下,Ni8Sn/Ti电极对甲醇氧化反应显示出极低的电荷传递电阻。结果表明,这种新型的钛基Ni8Sn/Ti电极对甲醇氧化反应具有极高的电催化活性。     

钛基氧化铱电极电沉积制备技术研究进展

钛基氧化铱电极作为DSA(dimension stable anode)中的典型电极,广泛应用于各个领域.目前工业生产的钛基氧化铱电极主要由传统热分解法制备,存在成本高昂,工艺繁琐,依赖人工劳动,无法大规模生产等问题,十分有必要探索开发新的制备技术.本文从沉积液配方、基底材料的选择及处理、电沉积方式以及沉积时间等方面系...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.