丙烯酸基水凝胶处理重金属废水的研究进展

重金属废水因其对环境污染严重、危害人类健康而越来越引起人们的重视。丙烯酸基高分子水凝胶由于含有多种功能基团和大量的活性吸附位点,在重金属吸附方面发挥了重要作用。本文主要综述了丙烯酸基高分子水凝胶在重金属废水处理方面的研究进展,总结和归纳了聚丙烯酸基高分子水凝胶的制备方法和分类等,分析了聚丙烯酸基高分子水凝胶作为吸附剂在重金属废水处理方面存在的问题,并对其后续应用和研究进行了展望。     

羧甲基纤维素基复合水凝胶的研究及应用进展

羧甲基纤维素(CMC)水凝胶是一种具有亲水性的天然三维聚合物材料,具有高吸水性,因此以羧甲基纤维素钠制备的水凝胶安全无毒可生物降解,被广泛应用于医药、食品、农业和环境等领域,作为保鲜材料、抗菌材料、生物传感器、药物输送系统和去除重金属的吸附剂。本文按CMC复合水凝胶材料来源的不同,分类综述了大分子/CMC水凝胶、单体/CMC水凝胶和无机物/CMC水凝胶的研究进展、功能特性以及应用领域,为羧甲基纤维素复合水凝胶的研究提供一定的思路和理论依据。总结此方向研究中不同材料对羧甲基纤维素复合水凝胶性能的提升情况,同时对羧甲基纤维素水凝胶的应用前景进行了展望。     

强韧型自愈合水凝胶的研究进展

水凝胶作为一种由大量水和与众不同的三维网状结构构成的智能软材料,已经广泛应用于许多领域,如药物输送、软骨修复、废物处理及电子设备等。然而,水凝胶不良的机械性能及自愈合性极大地限制了它们的潜在应用。目前已报道的韧性水凝胶通常不具有或只有很弱的自修复性,而自修复水凝胶通常机械性能非常弱。因此,研发具有高效自修复性能和优异机械性能的水凝胶材料,无论是从学术角度还是工业角度都是非常重要的。本文总结了近些年来强韧型自愈合水凝胶的最新研究进展,从其制备方法、性能等方面进行了简要介绍,并对未来的发展前景进行了展望。     

水滑石及其衍生物处理水中污染物的研究进展

水滑石(LDH)由于具有记忆效应、内部结构可调性、层间阴离子可交换性等优良性质,而在水处理领域具有广阔应用前景。综述了水滑石及其衍生物处理水中污染物的最新研究进展。介绍了LDH处理重金属废水和有机废水,利用催化氧化性能或通过与不同材料复合处理废水。此外,还简述了LDH的规模化生产现状及存在问题,对LDH材料在水处理领域的未来发展方向进行了展望。     

水凝胶功能改性研究与应用进展

水凝胶是一种三维网状亲水性高分子软材料,具有良好的固体力学和液体热力学性能,其自身柔软、可塑性强、生物相容性好,具有可降解性和刺激性响应特征。但传统方法制备的水凝胶有诸多缺陷,如有毒性、生物活性低、机械性能差等,使得其应用受限。本文综述了近10年来功能水凝胶制备与改性的主要研究进展及其应用现状,以多吸收位点和高机械强度等性能为主,重点阐述了国内外功能性水凝胶的最新制备方法,包括物理改性中的低分子复合材料交联与构建多重网络和化学改性中的接枝共聚等。详细介绍了该类功能材料在医药、生物、农业和食品等方面的应用现状与发展前景,特别关注了高效短时对外界环境微小变化具有响性的智能印迹水凝胶及其在检测领域的应用,为水凝胶的进一步开发和推广应用提供参考。     

温敏性抗菌水凝胶的制备与控释技术研究进展

温敏水凝胶是一类通过感知温度变化使自身发生相变的智能型聚合物凝胶,通过负载抗菌剂或抗菌性单体制备抗菌水凝胶是近年来药物控制释放、组织工程以及生物免疫等领域关注的热点。本文概述了负载抗菌剂型温敏性抗菌水凝胶的物理交联和化学交联制备技术的研究概况,着重阐述了温敏性抗菌水凝胶的孔径调控、制备材料调控、载药模式调控等技术的研究进展,并对温敏性抗菌水凝胶的控释技术应用前景,特别是在生物质材料领域的应用前景进行了展望。     

石墨烯基水凝胶的研究进展

石墨烯独特的分子结构使其具有优异的物理化学性质,这引起了国内外学者的研究兴趣。研究者们相继制备出了各种石墨烯基复合材料,其中,石墨烯基水凝胶是一种实用而吸引人的材料,有着广泛的应用前景。本文对石墨烯基水凝胶的研究进展进行了综述,对其在超级电容器、生物医药、水处理等方面的应用做了相关介绍,并对石墨烯基水凝胶的发展前景进行了展望。     

氧化石墨烯/聚合物复合水凝胶的研究进展

氧化石墨烯是一种具有单原子厚度的二维材料, 具有优异的力学性能和良好的水分散性, 其表面有大量的含氧官能团. 将氧化石墨烯引入水凝胶体系中可以提高水凝胶的机械性能, 丰富其刺激响应的类型. 目前, 氧化石墨烯水凝胶在高强度、 吸附、 自愈合及智能材料等很多领域均有出色的表现. 氧化石墨烯水凝胶的研究已有10年的历史. 本文总结了氧化石墨烯水凝胶的制备方法, 归纳了智能氧化石墨烯水凝胶在光热响应、 pH响应和自愈合3个方面的响应机理和研究进展, 并综合评述了其在高强度水凝胶、 生物医学、 智能材料和污水处理等方面的应用前景.     

可注射水凝胶的制备与应用

可注射水凝胶在再生医学和药物控释等方面有着广泛的用途,是近年来生物医用材料领域新的研究方向.本文综述了近年来人们在可注射水凝胶制备和应用方面的研究进展,最后展望了其发展前景.     

壳聚糖基可注射型温度敏感性水凝胶

壳聚糖基可注射型温度敏感性水凝胶是一种pH值中性的,在室温或低于室温时可保持液态,温度达到体温时可凝胶化的材料,有望被广泛应用于药物释放和组织工程领域,作为多肽和蛋白质等生物活性药物的可注射型释放载体或组织修复材料.本文介绍了壳聚糖基可注射型温敏性水凝胶的种类、特性、机制和应用等方面的研究进展.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。