Volumetric and Viscosimetric Measurements for Methanol + CH 3 –O–(CH 2 CH 2 O) n –CH 3 ( n = 2, 3, 4) Mixtures at (293.15–303.15) K and Atmospheric Pressure: Application of the ERAS Model

Densities, $$\rho$$, and kinematic viscosities, $$\nu$$, have been determined at atmospheric pressure and at 293.15–303.15 K for binary mixtures formed by methanol and one linear polyether of the type CH3–O–(CH2CH2O)n–CH3 (n = 2, 3, 4). Measurements on $$\rho$$ and $$\nu$$ were carried out, respectively, using an Anton Paar DMA 602 vibrating-tube densimeter and an Ubbelohde viscosimeter. The $$\rho$$ values were used to compute excess molar volumes, $$V_{{\text{m}}}^{{\text{E}}}$$, and, together with the $$\nu$$ results, dynamic viscosities ($$\eta$$). Deviations from linear dependence on mole fraction for viscosity, $$\Delta \eta$$, are also provided. Different semi-empirical equations have been employed to correlate viscosity data. Particularly, the equations used are the: Grunberg–Nissan, Hind, Frenkel, Katti–Chaudhri, McAllister and Heric. Calculations show that better results are obtained from the Hind equation. The $$V_{{\text{m}}}^{{\text{E}}}$$ values are large and negative and contrast with the positive excess molar enthalpies, $$H_{{\text{m}}}^{{\text{E}}}$$, available in the literature, for these systems. This indicates that structural effects are dominant. The $$\Delta \eta$$ results are positive and correlate well with the difference in volumes of the mixture compounds, confirming the importance of structural effects. The temperature dependences of $$\eta$$ and of the molar volume have been used to calculate enthalpies, entropies and Gibbs energies, $$\Delta G^{*}$$, of viscous flow. It is demonstrated that $$\Delta G^{*}$$ is essentially determined by enthalpic effects. Methanol + CH3–O–(CH2CH2O)n–CH3 mixtures have been treated in the framework of the ERAS model. Results for $$H_{{\text{m}}}^{{\text{E}}}$$ are acceptable, while the composition dependence of the $$V_{{\text{m}}}^{{\text{E}}}$$ curves is poorly represented. This has been ascribed to the existence of strong dipolar and structural effects in the present solutions.     

Thermodynamic Consistency Test of Vapor–liquid Equilibrium Data of Binary Systems Including Carbon Dioxide (CO 2 ) and Ionic Liquids Using the Generic Redlich–Kwong Equation of State

The thermodynamic consistency test of solubility P–T–x data for binary mixtures including carbon dioxide (CO2) + a room temperature ionic liquid has been investigated. Experimental solubility data taken from the open literature for 32 binary mixtures of CO2/RTILs contains 80 isotherms. The applied consistency test is based on the fundamental Gibbs–Duhem equation with use of the generic Redlich–Kwong (GRK) equation of state (EoS) coupled with the van der Waals–Berthelot (GRK/vdWB) mixing rule. The optimum parameters were obtained by minimizing the summation of per cent relative deviations between modeled and experimental data, based on the bubble pressure algorithm. Modeling was found acceptable for all isotherms, which demonstrated the usability of the GRK equation of state. Results of the thermodynamic consistency test showed that 36 of the isothermal data sets were thermodynamically consistent, 37 were not fully consistent, 6 were thermodynamically inconsistent and only one data set was found to need another model.     

Catalysis by Platinum(II) Iodo Complexes of C(sp2)–C(sp2) Electrophile Coupling

Kinetics and Catalysis - The catalytic C(sp2)–C(sp2) coupling of vinyl iodide was performed to form 1,3-butadiene in the PtII–NaI–С2Н3I–acetone-D6 system at...     

Effect of Re and Al 2 O 3 Promotion on the Working Stability of Cobalt Catalysts for the Fischer–Tropsch Synthesis

The results of the working stability studies of cobalt catalysts based on SiO2 and Al2O3 promoted with Re and Al2O3 in the synthesis of hydrocarbons from CO and H2 in continuous tests for 200–300 h are presented. The prepared catalysts were characterized by transmission electron spectroscopy, temperature-programmed reduction with hydrogen, temperature-programmed desorption of CO, and X-ray fluorescence spectroscopy and tested at a temperature 200°C, a pressure of 0.1 MPa, and a GHSV of 100 h–1. It was determined that a cobalt–silica catalyst promoted with Al2O3 had the highest activity. It was established that the addition of Al2O3 to a cobalt–silica catalyst increased the conversion of CO and selectivity for C5+ hydrocarbons and inhibited the agglomeration of Co particles under the action of a reaction atmosphere in the Fischer–Tropsch synthesis. It was found that the initial conversion of CO increased by a factor of 2 upon the introduction of 0.1 wt % rhenium into the Co/γ-Al2O3 catalyst; however, the rate of its deactivation increased in this case due to an almost twofold increase in the size of cobalt particles in the course of synthesis after operation for 300 h.     

Luminescent Properties of Europium(III) Complexes with Quinaldic Acid and Sulfur–Containing Neutral Ligands

The luminescent heteroligand complexes of europium(III) with quinaldic acid and sulfur-containing neutral ligands Eu(Quin)3∙D∙3H2O (Quin–quinaldic acid, D–dimethyl sulfoxide or dihexyl sulfoxide) and Eu(Quin)3∙3H2O have been obtained. Their composition and structure have been determined. The thermal and spectral-luminescent properties of the heteroligand europium(III) complexes have been studied. The quinaldate ion has been found to coordinate to the europium(III) ion as a bidentate ligand. The Stark structure of 5D0–7Fj (j = 0, 1, 2) transitions in the low-temperature luminescence spectra of the europium(III) complexes has been analyzed     

Specific Features of the Liquid-Phase Hydrogenation of 2-Butyne-1,4-Diol under the Action of Palladium–Phosphorus Particles

Kinetics and Catalysis - Efficient catalyst systems based on Pd–P particles for the chemoselective hydrogenation of 2‑butyne-1,4-diol, which are superior to Ziegler-type systems in...     

Performance of Single-Chamber Solid Oxide Fuel Cells Based on Ni and Ni–Cu Alloy Anodes and Fed with a Methane–Air Mixture

Kinetics and Catalysis - The electrochemical characteristics of Ni|YSZ|LSM and Ni–Cu|YSZ|LSM single-chamber solid oxide fuel cells fed with a methane–air mixture ([CH4]/[O2] molar ratio...     

Solid–Liquid Phase Equilibria in the Ternary Systems (LiBO 2 + NaBO 2 + H 2 O) and (LiBO 2 + KBO 2 + H 2 O) at 288.15 K and 0.1 MPa

Solid–liquid phase equilibria for the two aqueous systems (LiBO2 + NaBO2 + H2O) and (LiBO2 + KBO2 + H2O) at T = 288.15 K and p = 0.1 MPa were determined using the isothermal dissolution equilibrium method. The experimental results show that the phase diagrams consist of one two-salt co-saturated invariant point, two univariant solubility isotherms, and three crystallization fields. The two systems belong to simple co-saturated type, and neither double salt nor solid solution were found. The densities change regularly as the sodium metaborate (potassium metaborate) concentration increases in solution, and reach their maximum values at the invariant point. Based on the Pitzer and its extended Harvie–Møller–Weare (HMW) model, the solubilities for the ternary systems at 288.15 K were represented, and the calculated results agree well with the experimental values.     

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Catalysis Surveys from Asia - The catalytic performances and mechanism differences of model catalysts Cu–SSZ-13 and Fe–SSZ-13 with similar metal content and Si/Al ratio were compared....     

Liquid–(Solid + Liquid) Transitions in a Two-Component System of (CH 3 )CCl 3 + CCl 4

Liquid–(solid + liquid) transitions are studied in (CH3)CCl3 + CCl4 by using the Landau phenomelogical model. The Gibbs energy is expanded in terms of the orientational disorder (OD) parameters for the transitions of the liquid–(rhombohedral + liquid) and liquid–(face-centered cubic + liquid) in a two component system of (CH3)CCl3 + CCl4. From the Gibbs energy, the phase line equations are derived for the transitions studied and they are fitted to the observed T–X phase diagram of (CH3)CCl3 + CCl4 for the concentration (X) CCl4. Temperature and concentration dependences of the OD parameters (Ψ and η) and the inverse susceptibility ($$\chi_{\psi }^{ - 1}$$ and $$\chi_{\eta }^{ - 1}$$) for the two transitions of interest, are predicted by using the melting curves of (CH3)CCl3 + CCl4 on the basis of the Landau phenomenological model. Our predictions, which can be compared with the experimental data, indicate that the first order transition of the liquid–(solid + liquid), in particular, for (CH3)CCl3 + CCl4 can be described satisfactorily by the Landau mean field model.     

Multifunctional natural fibers: the potential of core shell MgO–SiO2 nanoparticles

Cellulose - Core–shell nanoparticles (NPs) based on metal oxides, namely magnesium oxide (MgO) and silica (SiO2), are a fantastic alternative for natural fibers’ functionalization. In...     

Ion Implantation in Diazoquinone–Novolac Photoresist

High Energy Chemistry - The processes of modifying the structural and optical properties of FP9120 and S1813 diazoquinone–novolac photoresist films on single-crystal silicon wafers beyond the...     

Experimental Determination and Correlation of Liquid–Liquid Equilibria Data for the Ternary Systems of Water + 1-Butanol + Solvents (Isophorone and Mesityl Oxide) at Different Temperatures

Liquid–liquid equilibria (LLE) data for {water + 1-butanol + isophorone} and {water + 1-butanol + mesityl oxide} ternary systems were investigated systematically at different temperatures under atmospheric pressure. The Othmer–Tobias and Bachman equations were applied to analyze the dependability of the experimental LLE data. Selectivities and distribution coefficients were used to evaluate the extractive efficiency of the extractants. The Non-Random Two Liquid (NRTL) and Universal Quasi-Chemical (UNIQUAC) models were applied to correlate the studied systems and were well represented with all root mean square deviations (RMSD) less than 0.2%. Meanwhile, binary interaction parameters among these compounds were acquired during the correlation process.     

Volcano correlations for the reactivity of surface-confined cobalt N<Subscript>4</Subscript>-macrocyclics for the electrocatalytic oxidation of 2-mercaptoacetate

We have investigated the electrocatalytic activity of several substituted and unsubstituted cobalt–phthalocyanines of substituted tetraphenyl porphyrins and of vitamin B₁₂, for the electro-oxidation of 2-mercaptoacetate, with the complexes pre-adsorbed on a pyrolytic graphite electrode. Several N4-macrocyclic were used to have a wide variety of Co(II)/(I) formal potentials. The electrocatalytic activity, measured as current at constant potential, increases with the Co(II)/(I) redox potential for porphyrins as Co–pentafluorotetraphenylporphyrin < Co–tetrasulfonatotetraphenylporphyrin < Co-2,2′,2″,2‴tetra-aminotetraphenylporphyrin and decreases for cobalt phthalocyanines as Co-3,4-octaethylhexyloxyphthalocyanine > Co–octamethoxyphthalocyanine > Co–tetranitrophthalocyanine Co–tetraaminophthalocyanine > Co–unsubstituted phthalocyanine > Co–tetrasulfonatophthalocyanine > Co–perfluorinated phthalocyanine. Vitamin B₁₂ exhibits the maximum activity. A correlation of log I (at constant potential) versus the Co(II)/(I) formal potential of the catalysts gives a volcano curve. This clearly shows that the search for better catalysts for this reaction point to those N₄-macrocyclic complexes with Co(II)/(I) formal potentials close to −0.84 V versus SCE, which correspond to an optimum situation for the interaction of the thiol with the active site. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Synthesis of Poly(<Emphasis Type="Italic">o</Emphasis>-anisidine)/H<Subscript>2</Subscript>SO<Subscript>4</Subscript> Film for the Development of Glucose Biosensor

The poly(o-anisidine)–sulfuric acid–glucose oxidase (POA–H₂SO₄–GOx) electrode has been investigated in the present work. Platinum electrode was used for the synthesis of poly (o-anisidine)–sulfuric acid (POA–H₂SO₄) film using galvanostatic method with 0.2 M o-anisidine, 1.0 M H₂SO₄ solution, 1.0 pH and 2 mA/cm² applied current density. The synthesized film was characterized using electrochemical technique, conductivity measurement, UV–visible spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy. GO_X was immobilized on synthesized POA–H₂SO₄ film by cross-linking via glutaraldehyde in phosphate and acetate buffer. The Michaelis–Menten constant ( K_\textm￠K_{\text{m}}^\prime ) was determined for the immobilized enzyme. The glucose oxidase electrode shows the maximum current response at pH 5.5 and potential 0.6 V. The sensitivity of POA–H₂SO₄–GO_X electrode in phosphate and acetate buffer has been recorded. The results of this study reveal that the phosphate buffer gives fast response as compared to acetate buffer in amperometric measurements.     

Variation in the strength of base sites in the system La<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript> in the range 25-200°C

Based on electronic diffuse reflectance spectra of indicators adsorbed on La₂O₃–ZrO₂, obtained at 25-200 °C, we have shown that the strength of its basic sites sharply increases from H_–S ≤ +17.2 to H_–S ≤ +33.0 in the range 25-140 °C. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 2, pp. 112-114, March-April, 2009.     

Enantioselective hydrogenation of levulinic acid esters in the presence of the Ru<Superscript>II</Superscript>-BINAP-HCl catalytic system

The rate of hydrogenation of γ-ketoesters MeCOCH₂CH₂COOR (R = Et, Prⁱ, Bu^t) in the presence of the chiral Ru^II—BINAP catalyst (BINAP is 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl) greatly increases upon the addition of 5–10 equivalents of HCl with respect to ruthenium. In the hydrogenation of ethyl levulinate, the optically active γ-hydroxy ester initially formed would cyclize by ∼95% to give γ-valerolactone with optical purity of 98–99% ee. When the Ru(COD)(MA)₂—BINAP—HCl catalytic system is used (COD is 1,5-cyclooctadiene, MA is 2-methylallyl), complete conversion of the ketoester (R = Et) in EtOH is attained in 5 h at 60 °C under an H₂ pressure of 60–70 atm. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2301–2304, October, 2005.     

Influence of B<Subscript>2</Subscript>O<Subscript>3</Subscript> on the structure and crystallization of soil active glasses

Glasses of the SiO₂–P₂O₅–K₂O–MgO–CaO–B₂O₃ system acting as nutrients carriers in the soil environment were synthesised by the melt-quenching technique. Thermal properties were studied using DTA/DSC methods and the influence of B₂O₃ and P₂O₅ content on thermal stability and crystallization process of these glasses was examined. The structure of the glass network was characterized by FTIR, ³¹P, and ¹¹B MAS NMR. The chemical activity of the glasses in the 2 mass% citric acid solution was measured by the ICP-AES method. The analysis indicated that the formation of P–O–B units with chemically stable tetrahedral borate groups decreases the glass solubility in conditions simulating the soil environment.     

Synthesis and characterization of ambient temperature superionic solids in the composite system CuI–Ag<Subscript>2</Subscript>O–TeO<Subscript>2</Subscript>

The present work deals with the composite system (CuI) _x –(Ag₂O–TeO₂)_{100– x} , where x=30, 35, 40, 45, 50, 55, 60, 65, 70 and 75 mol%, respectively, synthesized by a solid-state reaction route. Powder specimens were analysed using differential scanning calorimetry, X-ray diffraction and Fourier transform infrared techniques. These studies have revealed the formation of Cu₃TeO₆, AgI and/or other phases. The ambient temperature electrical conductivities obtained for the samples using a complex impedance method were found to lie in the range 10^–6–10^–4 Scm^–1, with low activation energies, thus indicating their superionic nature. The typical composition 35CuI–32.5Ag₂O–32.5TeO₂ was identified as the best conducting one, having an electrical conductivity of 6×10^–4 Scm^–1 at 296 K and an activation energy of 0.23 eV. Ion transport number measurements carried out using Wagner's polarization technique as well as by an electromotive force method suggested that silver ions were responsible for the observed transport features of the composite system. Electronic Publication