流动注射化学发光法检测水相中溶解臭氧浓度

基于碱性水溶液中臭氧氧化鲁米诺产生化学发光的现象,建立了利用流动注射化学发光技术检测水体溶解臭氧(DO3)的方法。检测了较高和较低两部分的DO3浓度范围,低浓度DO3从20μg/L到65μg/L,工作曲线为y=27．658In(X)-192．75;检出限为8．5μg/L(7次空白信号检测);高浓度D03从0．089mg／L到0．890mg／L,线性关系为y=0．0018x-23．711。溶液中的。DO3由靛蓝二磺酸钠法确定。随后利用化学发光系统检测鼓人臭氧气体的自来水,由工作曲线可以确定自来水中DO3的量。方法简便,结果准确。     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Determination of Biotin in Pharmaceutical Formulations by Potassium Permanganate-luminol-CdTe Nanoparticles Chemiluminescence System

A sensitive flow-injection chemiluminescence method was developed for the determination of biotin in the pharmaceutical formulations. The affinity between avidin and biotin was used to adsorb biotin on the polystyrene, with subsequent quantification of biotin based on its ability to enhance the chemiluminescence(CL) signal generated by the redox reaction of potassium permanganate-luminol-CdTe nanoparticles CL system. The investigations prove that apart from 3-aminophthalate, the CdTe quantum dots(QDs) play both catalytic and emitter roles. Under optimum conditions, the linear range for the determination of biotin was 0.01-25ng/mL with a detection limit of 7.3?10^-3 ng/mL(S/N=3). The relative standard deviation of 5 ng/L biotin was 2.06%(n=7). The proposed method was used to determine the biotin concentration in the pharmaceutical formulations and the recovery was between 96.4% and 104%. The proposed method is simple, convenient, rapid and sensitive.     

Europium(III)-Sensitized Chemiluminescence Determination of Ibuprofen in Pharmaceutical Preparations and Biological Fluids

Abstract

Chemiluminescence reaction of the system containing europium(III) ion, KMnO₄, Na₂SO₃, and ibuprofen was investigated for the determination of ibuprofen. The introduction of Eu(III) ion into the system of KMnO₄-Na₂SO₃-ibuprofen caused a significant increase in the chemiluminescence signal. The increment of the chemiluminescence signal is proportional to ibuprofen concentration in the range of 5.0 × 10^?8–5.0 × 10^?6 g/ml with a detection limit of 1 × 10^?8 g/ml. The relative standard deviation for 1.0 × 10^?7 g/ml ibuprofen solution was 1.7% (n = 11). The proposed method was successfully applied to determine ibuprofen in tablets and human plasma.     

Flow Injection Spectrophotometric Determination of Dipyrone in Pharmaceutical Formulations Using Fe(III) as Reagent

A flow injection spectrophotometric procedure with symmetric merging zones for dipyrone determination in pharmaceutical formulations is proposed. The determination is based on the formation of a blue complex (monitored at a wavelength of 642 nm) yield in the complexation reaction of dipyrone with Fe(III) in acid medium. Under optimum conditions, a calibration curve was obtained from 3.5 to 281 mg L^?1 with a detection limit of 2.8 mg L^?1 and the samples throughput was 80 h^?1. The analytical results obtained for commercial formulation samples by applying the proposed method were in good agreement with labeled values and those obtained by a comparative procedure at a 95% confidence level.     

流动注射-化学发光法测定盐酸林可霉素

盐酸林可霉素在 Na IO4 - H2 O2 - H+体系中能发生强的化学发光反应 ,据此建立了一种测定盐酸林可霉素的流动注射 _化学发光分析法 ,方法的检出限为 3.6× 1 0 -8g/m L,相对标准偏差为 1 .0 % (c S=1 .0× 1 0 -6g/m L,n=1 1 ) ,线性范围为 1 .0× 1 0 -7～ 9.0× 1 0 -5g/m L。该方法已用于盐酸林可霉素注射液的分析     

Determination of Three Imidazole Derivatives by Flow-Injection Chemiluminescence

Abstract

A rapid, simple, and sensitive method was developed for the determination of three imidazole derivatives based on their quenching effect on bis(2,4,6-tricholorophenyl) oxalate (TCPO)–H₂O₂ chemiluminescence (CL) in the presence of rhodamine 6 G. Conditions affecting CL intensity were studied. With sodium dodecyl sulfate (SDS) as the additional agent, the relative standard deviation (RSD) was more twice the RSD without SDS. Under optimal conditions, good linear ranges were obtained from 1.0 × 10^?4 g/mL to 1.0 × 10^?6 g/mL, 1.0 × 10^?5 g/mL to 1.0 × 10^?7 g/mL, and 1.0 × 10^?5 g/mL to 7.0 × 10^?7 g/mL, with detection limits of 8.0 × 10^?7 g/mL, 7.0 × 10^?8 g/mL, and 8.0 × 10^?8 g/mL (S/N = 3) for hydrobenzole hydrochloride, thiamazole, and mizolastine, respectively. The RSDs for 13 consecutive injections of 1.0 × 10^?6 g/mL hydrobenzole hydrochloride, thiamazole, and mizolastine were 1.89%, 1.47%, and 1.69%, respectively, and satisfied results were obtained with the method applied to their pharmaceutical preparations. The possible CL mechanism was simply discussed.     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.     

反相流动注射-化学发光法测定氨基酸

1　引　　言氨基酸是组成蛋白质的基本单元 ,是合成人体中各种酶、激素和抗体的重要物质 ,氨基酸在人体中含量的多少直接影响到人体的健康。目前测定氨基酸的方法主要有采用经液相色谱分离后再用分光光度法、荧光法检测其衍生物的方法 ,但衍生反应操作复杂且测定灵敏度较低 ;用氨基酸分析仪测定氨基酸可获得较高的灵敏度 ,但由于仪器设备价格昂贵 ,需专业人员操作且操作复杂 ,难以在中小型企业普及 ,限制了它们的广泛应用。此外 ,还有电化学、化学发光等方法 ,采用铁氰化钾 鲁米诺体系测定多种氨基酸的方法尚未见报道。2　实验部分2 .1　仪…     

Flow-Injection Fluorometric Determination of Novalgin in Pharmaceutical Preparations

A flow-injection configuration for the fluorometric determination of Novalgin (dipyrone) is proposed. The procedure is based on the oxidation of Novalgin by cerium(IV). The fluorescence native of cerium(III) formed in the oxidation of Novalgin is monitored. Lineal calibration graphs were obtained between 0.5 and 4 μg/ml, with a sampling rate of 40 samples/h and relative standard deviations between 0.93 and 2.8%. The applicability of the method to the determination of Novalgin in pharmaceutical preparations was demonstrated by investigating the effect of potential interferences and by analysis of commercial preparations.     

Flow-Injection Fluorimetric Determination of Thiamine in Pharmaceutical Preparations

 A new fluorimetric procedure for the determination of thiamine using flow injection analysis is proposed. The method is based on the derivatization reaction of the primary amine group with o-phthalaldehyde in the presence of 2-mercaptoethanol using fluorimetric detection. The calibration graph based on peak area was linear in the range 0.2–6 ng mL⁻¹. The detection limit was close to 0.1 ng mL⁻¹. The method was applied to the determination of the vitamin in commercial pharmaceutical preparations. Received March 31, 1999. Revision October 15, 1999.     

Determination of Melatonin in Rat Pineal Gland and Drug with Flow-Injection Chemiluminescence

A flow-injection chemiluminescence （CL） method for the determination of melatonin based on the CL reaction of melatonin with hydrogen peroxide and sodium hypochlorite （NaOCl） in a basic alkaline solution was developed. The possible CL mechanism has been discussed, and a proposal for the reaction pathway was given that singlet oxygen was clarified to be produced in this reaction system and was responsible for the CL emission. Under the optimized conditions, the linear concentration range of application was 1.0×10^-7-2.5 × 10^-4 moloL-I with a de- tection limit of 5.0 ×10^-8 moloL-1 （S/N= 3）. The relative standard deviation for eight repeated measurements of 1.0×10^-6 mol·L^-1 melatonin was 2.8%. The interferences of several important biological substances, some indole compound, cations and anions were studied. No interference was found for the anions, glucose, starch, most of cations and low concentration （less than 3.0 × 10^-6 mol·L^-1） of some biological substances and indole compound. The method was applied to the determination of melatonin in rat pineal gland and drug with satisfactory results. The sample throughput was 90 injections per hour.     

Chemiluminescence Flow-Injection System for Rapid Detection of Red Tide Phytoplankton

Abstract

A chemiluminescent flow-injection analysis (FIA) system for the detection of the red tide phytoplankton Chattonella antiqua has been developed based on a Cypridina luciferin analog, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1, 2-α]-pyrazin-3-one (MCLA), which strongly emits light at 465 nm in the presence of superoxide. The system consisted of a two reagent feeding stream, a sample injector, a joint for mixing MCLA and sample, a chemiluminescence (CL) reaction cell, a CL detector and a recorder unit. The response time is approximately 1 min for one measurement cycle. The FIA system has an optimum pH of 10.7. The calibration curves for C. antiqua displayed linearity from 2 × 10³ to 2 × 10⁴ cells ml^?1. When applied to the measurement of C. antiqua, the sensitivity obtained using the FIA system is approximately 10 times higher than that of the cytochrome c method. The FIA system is a rapid practical method for the detection of C. antiqua.     

Determination of Levodopa and Benserazide Hydrochloride in Pharmaceutical Formulations by CZE with Amperometric Detection

A novel method, capillary electrophoresis with amperometric detection, has been established for rapid and effective measurement of levodopa (L-dopa), and benserazide (BS) and its impurity (R,S)-2-amino-3-hydroxypropanohydrazide (Ro-04-1419) in co-beneldopa pharmaceutical formulations. Suitable separation and amperometric detection conditions were investigated and optimized. The optimum conditions of CZE detection were 40 mm phosphate solution at pH 5.3 as running buffer, 17 kV separation voltage, carbon-disk working electrode, 0.95 V (relative to Ag/AgCl) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 1.25 to 50 g mL^–1 for L-dopa, 1.2 × 10^–1 to 25.5 g mL^–1 for BS, and 1.0 × 10^–2 to 4.4 × 10^–1 g mL^–1 for Ro-04-1419, with correlation coefficients of 0.9994, 0.9951, and 0.9933, respectively. The detection limits for L-dopa, BS, and Ro-04-1419 were 0.38, 0.02, and 0.004 g mL^–1, respectively. Average recoveries were 100.2% for L-dopa, 102.4% for BS, and 90.8% for Ro-04-1419. This method was successfully applied to co-beneldopa granules and tablets.Revised: 30 November and 22 December 2004     

Highly Sensitive Flow-Injection Chemiluminescence Detection of Carbonyl Compounds in Wine Samples

A modified Trautz–Schorigin reaction, by using tannic acid-H₂O₂ system for the oxidation and determination of two kinds of carbonyl compounds was developed in this paper. It was found that formaldehyde and acetaldehyde could effectively enhance the chemiluminescence signals of tannic acid–H₂O₂ system in alkaline medium. Under optimized conditions, the proposed method has a linear range of 7 × 10^?9–1 × 10^?4 mol L^?1 for formaldehyde and 1 × 10^?8–1 × 10^?4 mol L^?1 for acetaldehyde with detection limits of 9 × 10^?11 and 3 × 10^?10 mol L^?1, respectively. The relative standard deviations for 15 repeated measurements of 1 × 10^?6 mol L^?1 HCHO and CH₃CHO are 1.13% and 1.65%, respectively. Analysis time per sample is 35 seconds. A comparison of results found by the proposed method with those obtained by a standard reference method provided good agreement. The proposed method is simple, rapid, convenient, and sensitive.     

Gas-Liquid Chromatographic Determination of Diphenhydramine (Dimedrol) Hydrochloride in Some Pharmaceutical Formulations

Abstract

A rapid quantitative gas-liquid chromatographic procedure for the determination of 2-diphenylmethoxy-N, N-dimethylethanamine (diphenhydramine, dimedrol) hydrochloride, in pure form and when it is dispensed in eye drops and lotion, is described. The antihistaminic drug requires no conversion to the free base, and the assayed pharmaceutical formulations need no sample cleanup, preliminary drug separation or derivatization. The method is adopted for a concentration range varied between1.0 - 10 mg.ml^?1 of the drug in ethanolic solutions. The accuracy obtained was 98.6 ± 0.31%, 93.3 ± 0.82%, and 87.9 ± 1.1% for the authentic diphenhydramine hydrochloride, its eye drops and its lotion. The 50% - addition of the drug to the labelled claim in the galenical forms, eye drops and lotion, gives average mean recoveries of 100.8 ± 0.74% and 97.9 ± 0.45% respectively.     

Flow-Injection Chemiluminescence as a Means of Studying the Metabolism of Unbound Chromium(III) in Rabbit Blood with On-Line Microdialysis Sampling

In this paper, we present an in-vivo, on-line, real-time analytical system for monitoring the metabolism of free chromium(III) in rabbit blood. This system includes microdialysis sampling, ion-exchange on-line separation and chemiluminescence detection. The results show that none of the co-existing substances in the blood, including protein and other small molecules, interfere with the determination. CrCl₃·6H₂O was administrated orally (0.5 g), and the microdialysis probe was utilized to sample rabbit blood with a perfusion rate of 10 µL min⁻¹. The dialytic efficiency of chromium(III) under the experimental conditions was 18.1 ± 5.1% (n=3). The concentration-time curve of chromium(III) is in accordance with the one-compartmental open model, the T_1/2 is 16.62 min.     

Improvement on Simultaneous Determination of Cr(III) and Cr(VI) by Capillary Electrophoresis and Chemiluminescence Detection

Chromiumexistsindifferentoxidationstatesingroundwater,industrialwastewater,seawater,andsoilofourenvironment1,2.Chromium(III)isanessentialtraceelementforhumans,requiredforthemaintenanceofnormalglucose,cholesterol,andfattyacidmetabolism.Ontheotherhand,watersolublechromium(VI),intheformCr2O72-orCrO42-,ishighlyirritatingandtoxictohumansandanimals3.Itsacutetoxiceffectsincludeanimmediatecardiovascularshockandlatereffectsonkidney,liver,andblood-formingorgans.Therefore,itisnecessaryforriskassessme…     

Determination of Cinnarizine in Pure and Pharmaceutical Formulations

Two simple, rapid and sensitive extractive spectrophotometric methods have been developed for the assay of cinnarizine (CNR) in pure and pharmaceutical formulations. The methods are based on the formation of chloroform soluble ion‐association complexes of CNR with thymol blue (TB) and with cresol red (CR) inNaOAc‐AcOH buffer of pH 3.6 for TB and in KCl‐HCl buffer of pH 1.6 for CR with absorption maxima at 405 nm and at 403 nm for TB and CR, respectively. Reaction conditions were optimized to obtain the maximum color intensity. The systems obeyed Beer's law in the range of 0.6–15.8 and 0.8–16.6 μg mL^?1 for TB and CR, respectively. Various analytical parameters have been evaluated and the results have been validated by statistical data.     

HPLC Determination of Ritodrine Hydrochloride in Pharmaceutical Formulations

A simple, rapid, and accurate HPLC method is described for the determination of ritodrine hydrochloride (RTH) in both pure form and pharmaceutical formulations. A Hypersil Shendon ODS column with a mobile phase of dibasic phosphate buffer and acetonitrile (75 : 25) and isoxsuprine hydrochloride were used as an internal standard. The flow rate was 1 mL min^–1 and the effluent was monitored at 270 nm pH 4.0. The calibration graph is linear in the range 2–30 g mL^–1. The proposed HPLC method has been successfully employed for the determination of RTH in Yutopar tablets and injection solutions.