Activation process in hydrogen storage related to oxide layers formed on zirconium alloys

The passive behavior of ZrNi alloys near the rest potential is studied through in situ voltammetry, ellipsometry, and microscopic observation. A significant oxide layer growth is observed in aqueous 1 M KOH during the application of different potential programs currently used in the activation processes of the alloy. Oxide barrier effects and occlusion of hydrogen species within the film take place. The kinetics of the oxide layer formation under potential cycling plays a significant role in the activation process of metal alloys used in metal hydride batteries.Dedicated to Professor Gyorgy Horanyi on the occasion of his 70th birthday.     

RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed oxide composite coating for improvement of Al-alloy sacrificial anodes

It has been recently proved that RuO₂ can act as an effective surface activator of aluminum alloy sacrificial anodes. TiO₂ has the property of stabilizing RuO₂ coating and resisting biofouling on metal surfaces. Hence, a mixed oxide catalytic coating of TiO₂ and RuO₂ can enhance the galvanic performance of aluminum alloy sacrificial anodes and resists biofouling on the anode surface. In the present work RuO₂–TiO₂ mixed oxide was coated on aluminum alloy sacrificial anodes. The large and uniform porous nature of the coating was found to facilitate efficient ion diffusion. The coating was found to persist on the anode even after 3 months of galvanic exposure. The anode having an optimum combination of the mixed oxide had 70% TiO₂ as the major component in the coating. The catalytic coating significantly improved the performance of the anodes to a large extent.     

Development of nano IrO<Subscript>2</Subscript> composite-reinforced nickel–phosphorous electrodes for hydrogen evolution reaction

Electroless and electroplated nickel electrodes are extensively used for hydrogen evolution reaction (HER). In the present work, TiO₂-supported IrO₂ mixed oxide composite was prepared and used to reinforce Ni–P electroless plates to be used as catalytic electrodes for HER. The electrodes exhibited high electrocatalytic activity when the electrodes were used for HER. All the parameters including particle size of the catalyst, surface roughness, and surface active sites were studied. The particle size of the IrO₂ catalyst in the mixed oxide was found to have high influence on the catalytic activity of the electrodes. Low overpotential as low as 70 mV at a current density of 200 mA cm⁻² was achieved with the mixed oxide-reinforced Ni–P electrodes.     

Thermal synthesis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1–x</Subscript>(Er<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new environmentally friendly inorganic pigments. Chemical compounds of the (Bi₂O₃)_1–x(Er₂O₃)_x type were synthetized. The host lattice of these pigments is Bi2O3 that is doped by Er³⁺ ions. The incorporation of doped ions provides interesting colours and contributes to an increase in the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments.     

Effect of structural,redox and acid characteristics of M<Subscript>x</Subscript>O<Subscript>y</Subscript>/ZrO<Subscript>2</Subscript>(Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) (M-Mn,Co, Cr) oxide nanocomposites on their catalytic properties in the deep oxidation of methane

Alumina-and zirconia-manganese catalysts for the deep oxidation of methane were studied by X-ray phase analysis, temperature-programmed hydrogen reduction, and IR spectroscopy. The most active catalyst has the optimal combination of dimensional, redox, and acid characteristics. The zirconia-manganese catalysts formed on the surface of a kaolin-aerosil honeycomb matrix provides for 80–100% conversion of methane to CO₂ at 690–750 °C. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 367–372, November–December, 2007.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Physicochemical properties and mixed electronic and ionic conduction of composite ceramics in the system ZrO<Subscript>2</Subscript>-Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

Composites ZrO₂-(Bi₂CuO₄+ 20 wt % Bi₂O₃) (50–80 vol % ZrO₂) are synthesized and their physicochemical properties are studied. It is demonstrated that the composites comprise triple-phase mixtures of ZrO₂ of a monoclinic modification, Bi₂CuO₄, and solid solution Bi_2?x Zr _x O_{3 + x/2} and retain their mechanical strength up to 800°C. Impedance spectroscopy is used to examine their electroconductivity at 700–800°C in the interval of partial oxygen pressures extending from 37 to 2.1 × 10⁴ Pa. Contributions made by electronic and ionic constituents to their overall conductivity are evaluated. The best specimens’ conductivity is ～0.01 S cm^?1, with the electronic and ionic transport numbers nearly equal. The composite consisting of 50 vol % ZrO₂ and 50 vol % (Bi₂CuO₄ + 20 wt % Bi₂CuO₄) is tested in the role of an oxygen-separating membrane. The selective flux of oxygen in the temperature interval 750–800°C amounts to (2.2–6.3) × 10^?8 mol cm^?2 s^?1, testifying that these materials may be used as gas-separating membranes.     

Characterization of nanosized ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript> spinel synthesized by the sol–gel method

Single-phase zinc aluminate (ZnAl₂O₄) nanoparticles with the spinel structure was successfully obtained by the sol–gel method. The nanoparticles are crystalline with no impurities related to ZnO or Al₂O₃ residues. The microstructural environment of aluminum ions changes with heat treatment temperature, as observed by FT-IR and also by ²⁷Al solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectra. The photoluminescence spectra show that the emission of pristine ZnAl₂O₄ may change depending on the calcining temperature due to the quantum size effect.     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Kinetic method for acetylsalicylic acid determination based on its inhibitory effect upon the catalytic decomposition of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The catalytic reaction of catalase was investigated, by means of a Clark oxygen sensor, in the presence of various concentrations of acetylsalicylic acid. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots, obtained in the absence and in the presence of the inhibitor. The inhibition pattern, suggested by the Lineweave-Burk plots, corresponds to a fully mixed inhibition mechanism. A kinetic method, based on the indicator reaction: , was developed for the quantitative determination of acetylsalicylic acid. Calibration graphs of the reciprocal value of first-order rate constant versus acetylsalicylic concentration covered the concentration range (2.99–19.98)×10^–4 mol/L, while the detection limit was 4.12×10^–4 mol/L acetylsalicylic acid with a standard deviation of 2.1×10^–5 mol/L.     

Role of rare-earth element oxides in catalysts for the oxidative conversion of methane based on Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

It has been established that oxides of the rare-earth elements with moderate redox potentials (La₂O₃, CeO₂) increased the activity and working stability of Ni-Al₂O₃/cordierite catalysts in the reactions of deep and partial oxidation of methane. In the presence of the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst the process of carbon dioxide conversion of methane can be intensified by introduction of oxygen into the reaction gas mixture which decreases the temperature to achieve high conversion to 75–100 °C and has practically no effect on selectivity with respect to H₂. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 359–364, November–December, 2008.     

Complex surface analytical investigations on hydrogen absorption and desorption processes of a TiMn<Subscript>2</Subscript>-based alloy

Metal hydrides are one of the most promising technologies in the field of hydrogen storage due to their high volumetric storage density. Important reaction steps take place at the very surface of the solid during hydrogen absorption. Since these reaction steps are drastically influenced by the properties and potential contamination of the solid, it is very important to understand the characteristics of the surface, and a variety of analytical methods are required to achieve this. In this work, a TiMn₂-type metal hydride alloy is investigated by means of high-pressure activation measurements, X-ray photoelectron spectroscopy (XPS), secondary neutral mass spectrometry (SNMS) and thermal desorption mass spectrometry (TDMS). In particular, TDMS is an analytical tool that, in contrast to SIMS or SNMS, allows the hydrogen content in a metal to be quantified. Furthermore, it allows the activation energy for desorption to be determined from TDMS profiles; the method used to achieve this is presented here in detail. In the results section, it is shown that the oxide layer formed during manufacture and long-term storage prevents any hydrogen from being absorbed, and so an activation process is required. XPS measurements show the oxide states of the main alloy elements, and a layer 18 nm thick is determined via SNMS. Furthermore, defined oxide layers are produced and characterized in UHV using XPS. The influence of these thin oxide layers on the hydrogen sorption process is examined using TDMS. Finally, the activation energy of desorption is determined for the investigated alloy using the method presented here, and values of 46 kJ/mol for hydrogen sorbed in UHV and 103 kJ/mol for hydrogen originating from the manufacturing process are obtained.     

Solid surface and field catalysed interface formation of colloidal Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript> during Al anodizing affecting the kinetics and mechanism of development and structure of porous oxides

Overall kinetic and potentiometric studies of the growth of porous anodic alumina films in saturated H₂SO₄+Al₂(SO₄)₃ electrolyte showed non-saturation conditions inside the pores and supersaturation conditions at the pore surface/electrolyte interface where the field and the solid surface catalyse the formation of colloidal Al₂(SO₄)₃ micelles. Suitable high-strength field thermodynamically sustained electrochemical and chemical kinetic equations were formulated. It was shown that the diameter and surface fraction of charge exchange at the pore bases, the real pore wall surface fraction where oxide dissolution occurs, and its rate are strongly affected by the conditions. The mechanism of growth and structure of the films are quite different from those in H₂SO₄. A mechanism of regular film growth is imposed and the critical current density, above which pitting appears, strongly increases. The formulated theory may predict improved or new Al anodizing technologies. Electronic Publication     

Tantalum oxide effect on the surface structure and morphology of the IrO<Subscript>2</Subscript> and IrO<Subscript>2</Subscript> + RuO<Subscript>2</Subscript> + TiO<Subscript>2</Subscript> coatings and on the corrosion and electrochemical properties of anodes prepared from these

Alterations in the phase composition, porosity, and surface morphology of coatings are examined following the insertion of a quantity of Ta₂O₅ into active coatings prepared from IrO₂ or IrO₂ + RuO₂ + TiO₂ (OIRTA). It is shown that even an insignificant concentration of Ta₂O₅ in a coating renders it substantially amorphous and leads to the appearance of a large number of wide protracted cracks in the coating. The latter extends the surface of anodes and boosts their apparent catalytic activity in the chlorine evolution reaction. In addition, this accelerates the diffusion of chloride ions toward the front surface of anodes, which noticeably reduces the overvoltage of the chlorine evolution reaction when manufacturing sodium chlorate. The coatings’ amorphization and the development of their surface substantially reduce the corrosion resistance of these anodes as compared with OIRTA.     

Synthesis,structure, and physicochemical properties of the Cr(<Emphasis Type="Italic">iso</Emphasis>-Bu<Subscript>2</Subscript>PS<Subscript>2</Subscript>)<Subscript>3</Subscript> chelate compound

A paramagnetic (μ_ef = 3.86 BM) complex Cr(i-Bu₂PS₂)₃ (I) has been synthesized. Single crystals I were grown, and the crystal structure of the compound was determined from X-ray diffraction data (X8 APEX diffractometer, MoK _α radiation, 4516 F _hkl , R = 0.0604). Monoclinic crystals, space group P2₁/n, unit cell parameters a = 14.2665(5) Å, b = 11.4400(4) Å, c = 23.1299(8) Å, β = 90.245(1)°, V = 3775.0(2) ų, Z = 4, d _calc = 1.196 g/cm³. The structure is based on discrete mononuclear molecules. The coordination polyhedron of the Cr atom is a distorted S₆ octahedron formed from the S atoms of three cyclic bidentate ligands — i-Bu₂PS ₂ ⁻ ions. Electron spectroscopy data correspond to the octahedral structure of the CrS₆ chromophore. Original Russian Text Copyright ? 2007 by E. A. Sankova, L. A. Glinskaya, T. E. Kokina, R. F. Klevstova, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 374–378, March–April, 2007.     

Influence of the Cation on the Solubility of CO<Subscript>2</Subscript> and H<Subscript>2</Subscript> in Ionic Liquids Based on the Bis(trifluoromethylsulfonyl)imide Anion

Experimental values for the solubility of carbon dioxide and hydrogen in three room temperature ionic liquids based on the same anion—(bistrifluoromethylsulfonyl)imide [Ntf₂]—and three different cations—1-butyl-3-methylimidazolium, [C₄mim], 1-ethyl-3-methylimidazolium, [C₂mim] and trimethyl-butylammonium, [N₄₁₁₁]—are reported between 283 and 343 K and close to atmospheric pressure. Carbon dioxide, with a mole-fraction solubility of the order of 10⁻², is two orders of magnitude more soluble than hydrogen. The solubility of CO₂ is very similar in the three ionic liquids although slightly lower in the presence of the [C₂mim] cation. In the case of H₂, noticeable differences were observed with larger mole fraction solubilities in the presence of [N₄₁₁₁] followed by [C₄mim]. All of the mole-fraction solubilities decrease with increasing temperature. From the variation of Henry’s law constants with temperature, the thermodynamic functions of solvation were calculated. The precision of the experimental data, considered as the average absolute deviation of the Henry’s law constants from appropriate smoothing equations, is always better than ±1%.     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

Properties of the surface layer and catalytic activity of Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> with Pt or Pd additives in the oxidation of hydrogen

The catalytic activity in the oxidation of hydrogen (in the gaseous state in the presence of excess oxygen) has been studied for samples of Pt(Pd)/Ta₂O_5−x, formed by reduction with hydrogen. The samples obtained had greater activity than the traditional catalysts Pt(Pd)/Al₂O₃. According to X-ray diffraction analysis and electron microscopic studies, Ta₂O_5−x becomes amorphous with the formation of more reduced non-stoichiometric oxygen-deficient tantalum oxides with a surface layer of catalyst. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 44, No. 3, pp. 180–185, May–June, 2008.     

Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.     

Thermo-programmed reduction study of Pt/WO<Subscript>x</Subscript>–ZrO<Subscript>2</Subscript> materials by thermogravimetry

The thermo-programmed reduction study of Pt/WO_x–ZrO₂ materials prepared with different tungsten loading were performed by thermogravimetry. The samples were synthesized by impregnation method and calcined at 600, 700 and 800°C. The characterizations of both un-calcined and calcined materials were carried out using different techniques: thermal analysis (TG and DTA), X-ray diffraction (XRD) and thermo-programmed reduction (TPR). TG and DTA analysis of un-calcined were used to determination of calcination temperatures of the samples. XRD diffractograms were useful to help us in the determination of phase presents. TPR profiles showed between three and four events at different temperatures attributed to platinum reduction and the different stages of tungsten specie reduction.