温度对石墨电极性能的影响

运用电化学阻抗谱(EIS)并结合循环伏安法(CV)研究了石墨电极25和60 ℃时在1 mol·L-1 LiPF6-EC(碳酸乙烯酯):DEC(碳酸二乙酯):DMC(碳酸二甲酯)电解液中, 以及60 ℃时在1 mol·L-1 LiPF6-EC:DEC:DMC+5%VC(碳酸亚乙烯酯)电解液中的首次阴极极化过程. 发现高温下(60 ℃)石墨电极在1 mol·L-1 LiPF6-EC:DEC:DMC电解液中可逆循环容量衰减的主要原因在于其表面无法形成稳定的固体电解质相界面(SEI)膜. 实验结果显示, VC添加剂能够增进高温下石墨电极表面SEI膜的稳定性, 进而改进石墨电极的循环性能.     

Properties of passivation film on carbon electrode in LiPF6/EC+DEC electrolytes

The co-solvent of ethylene carbonate (EC) and diethyl carbonate (DEC) was used to investigate the decomposition of electrolyte in Li-ion batteries. The electrolyte solutions were prepared by mixing in various volume ratios from pure DEC to 7:3 (EC:DEC). The potentials at which they are decomposed on the anodic electrode were examined using cyclic voltammetry. It was found that some kinds of reduction reactions proceeded and a film on the surface of the anode was formed. The film showed different properties, which were dependent on the mixing ratio of the solvents. From our results, we concluded that the best composition ratio of EC:DEC in 1 M LiPF₆/(EC+DEC) system was approximately 4:6 (EC:DEC, volume ratio).     

The effects of substituting groups in cyclic carbonates for stable SEI formation on graphite anode of lithium batteries

Monofluoropropylene carbonate (MFPC) and trifluoropropylene carbonate (TFPC) with a monofluoromethyl (or trifluoromethyl) replacing the methyl group in propylene carbonate (PC) as well as EC-CH₂CH₂Si(CH₃)₂OSi(CH₃)₃ (Si-A) and EC-CH₂CH₂Si(CH₃)₃ (Si-B) have been synthesized. The charge–discharge studies in a Li/MCMB (mesocarbon microbeads) cell using electrolyte containing these compounds show that the solid electrolyte interphase (SEI) formation capability of MFPC/DMC (dimethyl carbonate) and TFPC/DMC are about the same as ethylene carbonate (EC)/DMC, and TFPC/PC/DMC is better than that of EC/PC/DMC, while MFPC/PC/DMC is poorer than the EC/PC/DMC. The superior SEI formation capability of TFPC could be attributed to the strong electron withdrawing group of CF₃, which promote the “ring-opening” reaction. In contrast, the electron donating group CH₃ in the PC structure may demote the “ring opening” and cause the poor SEI formation. The results of MFPC with weaker electron withdrawing group give further support of this hypothesis. The bi-solvent electrolytes of Si-A/DMC and Si-B/DMC have comparable SEI formation capability as EC/DMC and TFPC/DMC, regardless of their bulky chains. This indicates that if proper chain structures are used, good SEI formation capability could be obtained for cyclic carbonate with bulky chains. These new solvents provide valuable information in studying the SEI formation mechanism and designing new electrolytes.     

Solubilization of SEI lithium salts in alkylcarbonate solvents

The SEI (Solid Electrolyte Interphase) at the surface of electrodes in lithium-ion batteries is composed of various lithium compounds, organic or mineral, which have a direct impact on cycling performance. The main lithium species constituting the SEI and selected in this study are lithium fluoride LiF, lithium carbonate Li₂CO₃, lithium hydroxide LiOH, lithium oxide Li₂O, lithium methoxide LiOCH₃ and lithium ethoxide LiOC₂H₅. Their solubilities were determined in ethylene, propylene, dimethyl, diethyl and vinylene carbonates (EC, PC, DMC, DEC and VC) and in one of their mixtures commonly used in lithium-ion batteries (EC/PC/3DMC) by mean of atomic absorption spectroscopy (AAS). These solutions were also investigated by EIS (Electrochemical Impedance Spectroscopy) and conductimetry measurements. Results show that while solubilization properties differ between LiF and other lithium compounds considered, their association pattern in solution is identical and solutions are mainly constituted of quadrupolar aggregates.     

电解液组成对尖晶石LiMn_2O_4中锂离子嵌脱过程的影响

运用电化学阻抗谱(EIS)研究了尖晶石LiMn2O4正极在1mol·L-1LiPF6-EC(碳酸乙烯酯)∶DEC(碳酸二乙酯)∶DMC(碳酸二甲酯),1mol·L-1LiPF6-EC∶DEC∶EMC(碳酸甲乙酯)和1mol·L-1LiPF6-EC∶DMC三种不同电解液中,-20-20℃范围内的阻抗谱特征随温度的变化.研究结果表明,温度强烈影响尖晶石LiMn2O4正极的阻抗谱特征,而电解液组成对尖晶石LiMn2O4正极阻抗谱特征的影响较小,但电解液组成对锂离子在尖晶石LiMn2O4正极中嵌入脱出过程相关动力学参数影响较大.测得尖晶石LiMn2O4正极在上述三种电解液中,锂离子迁移通过固体电解质相界面(SEI)膜的离子跳跃能垒平均值分别为7.60、16.40和18.40kJ·mol-1;电子电导率的热激活化能平均值分别为44.77、35.47和68.06kJ·mol-1;嵌入反应活化能平均值分别为52.19、46.19和69.86kJ·mol-1.     

添加剂氟代碳酸乙烯酯对锂离子电池性能的影响

在1 mol·L-1 LiPF6/碳酸乙烯酯(EC)+碳酸二甲酯(DMC)+碳酸甲乙酯(EMC)(EC、DMC、EMC体积比为1:1:1)电解液中加入体积比为2%的添加剂氟代碳酸乙烯酯(FEC), 用循环伏安法(CV)、扫描电镜(SEM)、能量散射光谱(EDS)、电化学阻抗谱(EIS)等方法, 研究了FEC 对锂离子电池性能及石墨化中间相碳微球(MCMB)电极/电解液界面性质的影响. 结果表明, 体积比2%FEC的添加可以抑制部分电解液溶剂的分解, 在MCMB电极表面形成一层性能优良的固体电解液相界面(SEI)膜, 降低了电池的阻抗, 明显提高了电池的比容量和循环稳定性.     

Theoretical studies to understand surface chemistry on carbon anodes for lithium-ion batteries: how does vinylene carbonate play its role as an electrolyte additive?

To elucidate the role of vinylene carbonate (VC) as a solvent additive in organic polar solutions for lithium-ion batteries, reductive decompositions for vinylene carbonate (VC) and ethylene carbonate (EC) molecules have been comprehensively investigated both in the gas phase and in solution by means of density functional theory calculations. The salt and solvent effects are incorporated with the clusters (EC)nLi+(VC) (n = 0-3), and further corrections that account for bulk solvent effects are added using the polarized continuum model (PCM). The electron affinities of (EC)nLi+(VC) (n = 0-3) monotonically decrease when the number of EC molecules increases; a sharp decrease of about 20.0 kcal/mol is found from n = 0 to 1 and a more gentle variation for n > 1. For (EC)nLi+(VC) (n = 1-3), the reduction of VC brings about more stable ion-pair intermediates than those due to reduction of the EC molecule by 3.1, 6.1, and 5.3 kcal/mol, respectively. This finding qualitatively agrees with the experimental fact that the reduction potential of VC in the presence of Li salt is more negative than that of EC. The calculated reduction potentials corresponding to radical anion formation are close to the experimental potentials determined with cyclic voltammetry on a gold electrode surface (-2.67, -3.19 eV on the physical scale for VC and EC respectively vs experimental values -2.96 and -2.94 eV). Regarding the decomposition mechanisms, the VC and EC moieties undergo homolytic ring opening from their respective reduction intermediates, and the energy barrier of VC is about one time higher than that of EC (e.g., 20.1 vs 8.8 kcal/mol for (EC)2Li+(VC)); both are weakly affected by the explicit solvent molecules and by a bulk solvent represented by a continuum model. Alternatively, starting from the VC-reduction intermediate, the ring opening of the EC moiety via an intramolecular electron-transfer transition state has also been located; its barrier lies between those of EC and VC (e.g., 17.2 kcal/mol for (EC)2Li+(VC)). On the basis of these results, we suggest the following explanation about the role that VC may play as additive in EC-based lithium-ion battery electrolytes; VC is initially reduced to a more stable intermediate than that from EC reduction. One possibility then is that the reduced VC decomposes to form a radical anion via a barrier of about 20 kcal/mol, which undergoes a series of reactions to give rise to more active film-forming products than those resulting from EC reduction, such as lithium divinylene dicarbonate, Li-C carbides, lithium vinylene dicarbonate, R-O-Li compound, and even oligomers with repeated vinylene and carbonate-vinylene units. Another possibility starting from the VC-reduction intermediate is that the ring opening occurs on the unreduced EC moiety instead of being on the reduced VC, via an intramolecular electron transfer transition state, the energy barrier of which is lower than that of the former, in which VC just helps the intermediate formation and is not consumed. The factors that determine the additive functioning mechanism are briefly discussed, and consequently a general rule for the selection of electrolyte additive is proposed.     

力曲线用于硅负极材料表面膜的研究

利用原子力显微镜（AFM）力曲线模式来研究锂离子电池硅负极材料在含碳酸亚乙烯酯添加剂（VC）电解质首周循环时固态电解质相表面膜（SEI膜）的三维结构. 测试表明SEI膜具有多层结构,同时得到SEI膜厚度、杨氏模量以及覆盖度在首周循环过程中的变化,采用三维图呈现了硅材料表面膜的分布.     

The solvation structure,transport properties and reduction behavior of carbonate-based electrolytes of lithium-ion batteries

Despite the extensive employment of binary/ternary mixed-carbonate electrolytes (MCEs) for Li-ion batteries, the role of each ingredient with regards to the solvation structure, transport properties, and reduction behavior is not fully understood. Herein, we report the atomistic modeling and transport property measurements of the Gen2 (1.2 M LiPF₆ in ethylene carbonate (EC) and ethyl methyl carbonate (EMC)) and EC-base (1.2 M LiPF₆ in EC) electrolytes, as well as their mixtures with 10 mol% fluoroethylene carbonate (FEC). Due to the mixing of cyclic and linear carbonates, the Gen2 electrolyte is found to have a 60% lower ion dissociation rate and a 44% faster Li⁺ self-diffusion rate than the EC-base electrolyte, while the total ionic conductivities are similar. Moreover, we propose for the first time the anion–solvent exchange mechanism in MCEs with identified energetic and electrostatic origins. For electrolytes with additive, up to 25% FEC coordinates with Li⁺, which exhibits a preferential reduction that helps passivate the anode and facilitates an improved solid electrolyte interphase. The work provides a coherent computational framework for evaluating mixed electrolyte systems.

The different roles of the anion, cyclic and linear carbonates, and additive in mixed-carbonate electrolytes are revealed. The anion–solvent exchange mechanism and factors influencing the solid electrolyte interphase (SEI) formation are deciphered.     

Electrochemical performances of two kinds of ternary electrolyte mixtures with lithium bis(oxalate)borate

Conductivities (??) of PC (propylene carbonate)/EMC (ethyl methyl carbon ate)/DMC (dimethyl carbonate) and EC (ethylene carbonate)/EMC/DMC solutions of lithium bis(oxalate)borate (LiBOB) were experimentally determined at a temperature (??) range from ?40.0 to 60.0°C. Under such experimental conditions, the effect factors on the ??, such as the salt molar concentrations (m), and the volume ratio of solvent compositions, were also investigated. The results showed that, in wide ?? range, the higher ?? were obtained with 0.7 mol L^?1 LiBOB in PC/EMC/DMC and 0.6 mol L^?1 LiBOB in EC/EMC/DMC and with a volume ratio of 1: 1: 1 and 1: 1: 2, respectively. When used in LiFePO₄/Li cells, compared to the cell with the electrolyte system of 1.0 mol L^?1 LiPF₆-EC/EMC/DMC (1: 1: 1), LiBOB cells with PC/EMC/DMC and EC/EMC/DMC electrolyte systems with the same volume mixture solvent compositions exhibit several advantages, such as more stable cycle performance, higher mean voltage, excellent large current discharge capability, more capacity retention at high temperature, and more stable storage performance, etc. This study not only shows that LiBOB is a very promising alternative salt for lithium ion chemistry, but also provides appropriate solvent to improve LiBOB??s electrochemical performance.     

二氟草酸硼酸钠作为电解液添加剂对石墨负极性能的影响

锂离子电池日益广泛的应用对其性能提出越来越高的要求,而在电解液中加入适当的添加剂能够显著提升电极材料的电化学性能. 本文首次在1 mol·L^-1 LiPF₆/EC + DMC + EMC（体积比1:1:1）的电解液中添加一定量的二氟草酸硼酸钠(NaDFOB),并通过循环伏安（CV）、电化学阻抗图谱（EIS）和扫描电子显微镜（SEM）等分析考察了其对石墨负极材料性能的具体影响. 结果显示,添加NaDFOB的电解液显著提高了石墨材料在常温下的可逆充放电容量和循环性能,同时明显改善了石墨材料的高温循环性能. 其机理在于NaDFOB的阴阳离子同时参与了石墨表面固体电解质界面膜（SEI）的形成,形成高稳定性的电解液/电极界面.     

磷酸三甲酯和碳酸亚乙烯酯对锂离子电池的复合作用

应用循环伏安、交流阻抗、扫描电子显微镜和锂离子电池性能检测装置研究了阻燃添加剂磷酸三甲酯(TMP)和成膜添加剂碳酸亚乙烯酯(VC)对锂离子电池的复合作用.结果表明,复合使用TMP和VC不仅能提高电池的安全性而且能改善电池的循环性能,原因可能是在电池首次充放电过程中VC优先还原,还原产物在负极表面聚合形成良好的SEI膜,有效地制约了因TMP在石墨负极表面的分解而造成负极石墨的脱落,同时提高了SEI膜的稳定性.     

Monitoring the mechanical properties of the solid electrolyte interphase(SEI) using electrochemical quartz crystal microbalance with dissipation

Stable solid electrolyte interphase(SEI) has been well established to be critical for the reversible operation of Li(ion) batteries,yet our understanding of its mechanical properties currently remains incomplete.Here,we used an electrochemical quartz crystal microbalance combined with dissipation monitoring(EQCM-D) to investigate SEI formation.By quantitatively estimating in-situ,the change in mass,shear modulus,and viscosity of the SEI,we show that the SEI formation in propylene carbonate(PC)-and ethylene carbonate/diethyl carbonate(EC/DEC)-based electrolytes involves the growth of a rigid laye r followed by a viscoelastic layer,whereas a distinct "one-layer" rigid model is applicable to the SEI formulated in tetraethylene glycol dimethyl ether(TEGDME)-based electrolyte.With the continuous formation of the SEI,its shear modulus decreases accompanied by an increase in viscosity.In TEGDME,the lightest/thinnest SEI(mass lower than in PC by a factor of nine) yet having the greatest stiffness(more than five times that in PC) is obtained.We attribute this behavior to differences in the chemical composition of the SEIs,which have been revealed by tracking the mass-change-per-mole-of-electrontransferred using EQCM-D and further confirmed by X-ray photoelectron spectroscopy.     

Rational Screening of High-Voltage Electrolytes and Additives for Use in LiNi0.5Mn1.5O4-Based Li-Ion Batteries

In the present work, we focus onthe experimental screening of selected electrolytes, which have been reported earlier in different works, as a good choice for high-voltage Li-ion batteries. Twenty-four solutions were studied by means of their high-voltage stability in lithium half-cells with idle electrode (C+PVDF) and the LiNi_0.5Mn_1.5O₄-based composite as a positive electrode. Some of the solutions were based on the standard 1 M LiPF₆ in EC:DMC:DEC = 1:1:1 with/without additives, such as fluoroethylene carbonate, lithium bis(oxalate) borate and lithium difluoro(oxalate)borate. More concentrated solutions of LiPF₆ in EC:DMC:DEC = 1:1:1 were also studied. In addition, the solutions of LiBF₄ and LiPF₆ in various solvents, such as sulfolane, adiponitrile and tris(trimethylsilyl) phosphate, atdifferent concentrations were investigated. A complex study, including cyclic voltammetry, galvanostatic cycling, impedance spectroscopy and ex situ PXRD and EDX, was applied for the first time to such a wide range of electrolytesto provide an objective assessment of the stability of the systems under study. We observed a better anodic stability, including a slower capacity fading during the cycling and lower charge transfer resistance, for the concentrated electrolytes and sulfolane-based solutions. Among the studied electrolytes, the concentrated LiPF₆ in EC:DEC:DMC = 1:1:1 performed the best, since it provided both low SEI resistance and stability of the LiNi_0.5Mn_1.5O₄ cathode material.     

电解液添加剂硫酸亚乙酯对锂离子电池性能的影响

在1 mol/L LiPF₆/碳酸乙烯酯+碳酸二甲酯+碳酸甲乙酯（体积比1∶1∶1）电解液中,采用恒流充放电测试、循环伏安法（CV）、扫描电子显微镜（SEM）、能量散射光谱（EDS）、电化学阻抗谱（EIS）等测试技术,研究了添加剂硫酸亚乙酯（DTD）对锂离子电池性能及石墨化中间相碳微球（MCMB）电极/电解液界面性质的影响。 结果表明,在电解液中引入体积分数0.01%DTD后,MCMB/Li电池可逆放电容量从300 mA·h/g提高至350 mA·h/g,电池总阻抗降低,循环稳定性提高。CV测试发现,在首次还原过程中,DTD在电极电位1.4 V左右（vs Li/Li⁺）发生电化学还原,参与了MCMB电极表面固体电解质相界面膜（SEI膜）的形成过程。 同时,DTD对LiMn₂O₄电极性能无不良影响。     

二氟二草酸硼酸锂对LiFePO4/石墨电池高温性能的影响

研究了二氟二草酸硼酸锂(LiODFB)作为锂盐加入到碳酸丙烯酯(PC)+碳酸乙烯酯(EC)+碳酸甲乙酯(EMC)(质量比为1:1:3)混合溶剂中对LiFePO4/石墨电池高温(60 ℃)循环性能的影响. 用线性扫描伏安法(LSV)测试了电解液的电化学窗口. 通过等离子发射光谱(ICP)和能量散射光谱(EDS)对LiFePO4材料高温条件下在不同电解液中的稳定性进行了研究; 并用扫描电镜(SEM)和电化学交流阻抗谱(EIS)分析了石墨负极表面的固体电解液相界面(SEI)膜的热稳定性. 结果表明: 一方面LiODFB基电解液能抑制LiFePO4材料在高温条件下Fe(II)的溶解, 防止溶解的Fe(II)在石墨上还原, 有效地降低电池阻抗; 另一方面, 在LiODFB基电解液中形成的石墨负极表面SEI膜具有更好的热稳定性, 能显著提高LiFePO4/石墨电池的高温循环性能.     

A pentafluorophenylboron oxalate additive in non-aqueous electrolytes for lithium batteries

A novel compound named pentafluorophenylboron oxalate (PFPBO) has been synthesized. PFPBO has a unique molecular structure containing a boron atom center with electron deficiency and an oxalate group. It is found that when PFPBO is used as additive, the solubility of lithium fluoride (LiF) or lithium oxide (Li₂O, Li₂O₂) in propylene carbonate (PC) and dimethyl carbonate (DMC) solvents can be increased dramatically. The new electrolytes show high ionic conductivity, high lithium ion transference number and good compatibility with LiMn₂O₄ cathode and MCMB anode. PFPBO was synthesized with the designed structure to act as a bi-functional additive: boron-based anion receptor (BBAR) additive and stable solid electrolyte interphase (SEI) formation additive in PC-based electrolytes. The results show it does possess these two desired functionalities.     

Thermal instabilities of organic carbonates with charged cathode materials in lithium-ion batteries

Thermal instabilities of de-lithiated materials with organic carbonates were verified by DSC. Transition metal oxides FePO₄, NiO₂, Mn₂O₄, and Co₃O₄ were mixed with DEC, DMC, EC, EMC, and PC then dynamically screened to about 500 °C. Curves were acquired and analyzed to determine exothermic onset temperatures and reaction enthalpies. These data for assessing the thermal hazards of conditions were compared to those data published in literature.     

New insight into the solid electrolyte interphase with use of a focused ion beam

The formation and evolution of the solid electrolyte interphase (SEI) film on the surface of natural graphite spheres in the electrolyte of 1 M LiPF6 in ethylene carbonate (EC) and dimethyl carbonate (DMC) (volume ratio 1:1) were investigated with use of focused ion beam (FIB) technology. Secondary electron FIB images clearly show the surface and cross-section morphology of the SEI film. The composition variation along the surface and cross section of the SEI film was also explored by the elemental line scan analysis (ELSA). The initial SEI film with an apparent thickness range of approximately 450 to approximately 980 nm is rough in morphology and nonuniform in composition, and contains small splits. After certain electrochemical cycles, the thickened SEI film displays microscale holes and obvious cracks on the surface, and the content of organic compounds increases. In addition, the concept of "internal SEI film" is first proposed based on the characterization of the cross section of the natural graphite spheres with the aid of FIB. Finally, the capacity fading mechanisms of the natural graphite spheres corresponding to different electrochemical stages are discussed.     

含FEC电解液的锂离子电池低温性能研究

研究含FEC溶剂电解液(FEC+EMC,EC,PC)的低温性能及其与磷酸铁锂正极或中间相碳微球(MCMB)负极的匹配.该电解液具有较高的低温电导率,FEC可在1.6 V与负极反应成膜,有效地提高负极稳定性.红外测试发现,FEC可抑制其它电解液溶剂在负极成膜过程中的分解,在常温(20℃)和低温(-20℃)下形成的SEI膜阻抗均较低.电化学测试表明,以该电解液装配的锂离子电池(电极)具有较高的低温放电容量和倍率性能.