间歇式水热合成制备丝光沸石膜及其异丙醇脱水应用

采用市售廉价大孔α-Al₂O₃管作为基质材料，通过热浸渍法在管外表面涂敷晶种，随后在无模板剂体系下，利用新型的间歇式水热合成法制备丝光沸石膜。对比了传统加热和间歇式加热对丝光沸石膜形貌、结构及渗透蒸发异丙醇脱水分离性能的差异。考察了合成液中Na₂O/SiO₂、SiO₂/Al₂O₃和NaF/SiO₂物质的量之比在间歇式水热合成下对丝光沸石膜的影响。研究结果表明，当合成液中Na₂O/SiO₂、SiO₂/Al₂O₃和NaF/SiO₂物质的量之比分别为0.24、16.7和0.25时，制备的丝光沸石膜渗透蒸发异丙醇脱水分离性能最佳，在75℃下，对异丙醇/水(9∶1，w/w)的渗透通量达5.60 kg·m^-2·h^-1，水对异丙醇的分离因数大于10 000。     

TiO2掺杂用于调变α-Al2O3中空纤维膜烧结性能与表面性质

利用相转化?高温烧结技术制备α?Al₂O₃中空纤维膜,系统研究了TiO₂掺杂调变中空纤维膜的烧结性能与表面性质。结果表明,TiO₂与α?Al₂O₃之间的固相反应能够促进中空纤维的烧结,当TiO₂掺杂量(物质的量分数)为1%~2%时,其烧结温度可以降到1400℃,且机械强度保持不变;TiO₂掺杂增加了中空纤维表面的羟基活性位点浓度,从而有利于CHA分子筛膜的生长;使用物质的量分数1%~3%TiO₂掺杂的α?Al₂O₃中空纤维制备出高质量CHA分子筛膜,其用于乙醇/水(9∶1,w/w)溶液渗透汽化脱水时的分离因子均超过10000。     

A型沸石的生成机理

用化学分析和TMC-GC(三甲基硅气相色谱)法定量地研究了凝胶体系(3Na₂O·Al₂O₃·2SiO₂·185H₂O)在A型沸石结晶过程中固、液相组分SiO₂·Al₂O₃及硅酸根离子存在状态的变化;用电子显微镜研究了液相中晶核的生成,证实了A型沸石结晶过程为液相生成机理。     

X射线荧光光谱法测定黏土中的主次组分

采用熔融玻璃片制样,选用标准样品,以经验α系数和散射线内标法校正元素谱线重叠干扰和基体效应,使用ZSX Primus Ⅱ X射线荧光光谱仪对黏土样品中的Al₂O₃、SiO₂、Fe₂O₃、CaO、MgO、K₂O、Na₂O、MnO、P₂O₅、TiO₂、Cu、Cr等组分进行测定,分析结果与标准值和化学值相吻合,12次测定的相对标准偏差小于10%.     

一步法合成多级孔结构ZSM-5分子筛

多级孔结构ZSM-5分子筛的合成过程复杂。利用双模板剂,通过优化晶化条件(如晶化时间与晶化温度)和Si/Al物质的量比等一步水热晶化合成了具有多级孔结构的ZSM-5分子筛,并采用XRD、N₂吸附-脱附、吡啶红外吸脱附、SEM和TEM等方法对样品的晶体结构、孔道结构、表面酸性和形貌等进行了表征。结果表明,一步法合成多级孔结构ZSM-5分子筛的适宜条件是:晶化温度160-180℃,晶化时间24-96 h,反应物组成为SiO₂/Al₂O₃/Na₂O/CTAB/TPABr/H₂O=1/x/0.4/0.05/0.12/280,(x:50-240)。其中,晶化温度160℃、晶化时间48 h和以Si/Al物质的量比50的凝胶合成的样品具有有序的介孔(平均尺寸3.60 nm)结构、较高的结晶度和较强的酸性。     

含氟体系下高性能丝光沸石分子筛膜的制备及其性能

采用热涂-浸渍法在大孔α-Al2O3载体上形成薄且致密的晶种层,然后在不添加有机模板剂的含氟条件下二次水热生长法制备了高性能丝光沸石分子筛膜,考察了NaF含量、硅/铝比对丝光沸石分子筛膜形貌和性能的影响.将摩尔组成为6Na2O:1.2Al2O3:30SiO2:780H2O:1.5NaF条件下合成的丝光沸石分子筛膜用于渗透汽化分离91.5%乙醇/水体系,在渗透汽化温度70°C、真空度为400Pa条件下,分离因子和通量分别达到了6872和0.51kg/(m2·h);另外,在分离异丙醇/水、乙酸/水体系时,渗透侧水浓度达到了100%(在色谱检测极限范围内),该分离系数是目前报道的丝光沸石分子筛膜分离的最佳值,并在乙酸浓度为1mol/L的乙醇水溶液中表现出良好的耐酸性.该膜有望作为膜反应器在乙酸乙酯等酯类的生产中大大提高转化率.     

ZSM-5分子筛酸性质对甲醛合成三聚甲醛催化性能的影响

ZSM-5分子筛是合成三聚甲醛的有效催化剂。本工作通过XRF、XRD、SEM、NH₃-TPD、Py-FTIR和²⁷Al MAS NMR等手段对一系列不同SiO₂/Al₂O₃物质的量比的ZSM-5分子筛催化剂进行了表征,研究了ZSM-5分子筛中Brønsted酸中心和Lewis酸中心对其甲醛合成三聚甲醛催化性能的影响。结果表明,SiO₂/Al₂O₃物质的量比为250的ZSM-5分子筛具有合适的Brønsted酸中心用于催化甲醛缩聚为三聚甲醛的反应,同时其Lewis酸中心量极少,可有效抑制Cannizzaro或Tishchenko等副反应,提高三聚甲醛的选择性,因而具有最佳的合成三聚甲醛催化性能。寿命实验评价结果显示,SiO₂/Al₂O₃物质的量比为250的ZSM-5分子筛具有良好的催化稳定性,单程寿命长达114 h,并且可通过550℃焙烧再生恢复其催化活性。     

负载型铂催化剂中的载体效应

本文用程序升温热脱附法和氢氧滴定法研究了SiO₂、SiO₂·Al₂O₃、Al₂O₃、SiO₂·SnO₂和Al₂O₃·SnO₂等和Pt的相互作用,表明Pt和载体作用强弱的顺序为:Al₂O₃>SiO₂·Al₂O₃>SiO₂;发现SnO₂具有强化SiO₂和Al₂O₃载体效应的作用;提出Pt和载体相互作用较强部位可能是Pt和缺氧氧化物所形成的表面络合物--Pt-[Al₂O_x]和Pt-[SnO_x]。     

沸石转晶的研究(Ⅰ)——A型沸石转晶为NaHS型沸石的生成机理

用化学分析和三甲基硅烷化-气相色谱(TMS-GC)法研究了3Na₂O·Al₂O₃·2SiO₂·60H₂O凝胶体系由介稳态A型沸石向稳定的NaHS沸石的转晶过程,并用电子显微镜,透射电镜考察了转晶过程液相中晶核的生成及晶型的变化,进一步证实了沸石的液相生成机理.     

双矿化剂对合成ZSM-5分子筛酸性和织构特征及其甲醇转化制丙烯催化性能的影响

采用静态水热法在F^--OH^-体系中,以四丙基氢氧化铵为模板剂、偏铝酸钠为铝源、正硅酸乙酯为硅源,合成了纳米SiO₂-ZSM-5分子筛,考察了F^-/Al₂O₃物质的量比对所合成的ZSM-5分子筛织构性质和甲醇转化制丙烯催化性能的影响。结果发现,随着初始溶胶F^-/Al₂O₃物质的量比的增大,产物中SiO₂的含量增大,ZSM-5分子筛的相对结晶度有所降低;同时,分子筛的比表面积和孔容减小、酸强度降低、酸量减少。对于甲醇转化制丙烯,最佳F^-/Al₂O₃物质的量比为12;此时,丙烯选择性高于45%,丙烯/乙烯（P/E）比值大于10。反应机理分析表明,过渡态择形选择性是控制烯烃选择性的重要因素。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.