Coherent aperture synthesis by an incoherent signal

The procedure of aperture synthesis by an incoherent source during displacement of the receiving system in space is considered. The advantages of the method are the possibility of aperture synthesis with the help of antenna arrays consisting of two receivers and its applicability to both the source of a quasimonochromatic signal and that possessing a continuous spectrum. The method is applicable with the same limitations as the known methods using the procedures of signal phasing. The results of mathematical simulation of the synthesis upon location of two sources with close frequencies at different distances and in the presence of noise, as well as the results of the in situ experiment with a reverberation interference, are given. The algorithm for decreasing the time of aperture synthesis without resolution deterioration is proposed and tested in situ.     

浅海非均匀水平阵宽带声场信号无源孔径扩展

大孔径水平阵对于浅海低频水声物理实验研究和应用至关重要,然而受实际情况制约,通常使用的水平基阵孔径十分有限,通过孔径扩展处理来扩展基阵孔径是一条重要途径。传统的无源孔径扩展方法是建立在均匀线阵、匀速相对运动和相干窄带连续信号的基础上的,难以适用于非均匀阵以及非连续宽带声源的情况。针对这些问题,提出了非均匀阵宽带声场信号的无源孔径扩展方法。使用静止布设在海底的非均匀水平短阵接收运动声源重复发射的宽带声信号,先开展均匀空间插值,然后在阵元域和波束域进行宽带扩展孔径处理。仿真和实验结果表明,在水深约70 m的浅海波导环境中,纵向间隔27.5 m的2个阵元接收20~200 Hz宽带声场,其空间插值结果与真值的相关系数大于0.99,说明宽带声场插值方法的合理性。在水平非均匀、纵向孔径250 m的短阵接收声场无法分析简正波频散特征的情况下,仿真和实验数据经过宽带无源孔径扩展处理得到孔径大于1 km的均匀线阵的声场,能高分辨区分各阶简正波,证明所提方法是有效的。      

Acoustic images of objects moving under an inhomogeneous layer

The possibilities and limitations of the methods of obtaining acoustic images of objects moving under an inhomogeneous scattering layer are considered. It is shown that the previously proposed algorithms of signal processing that select a random phase modulation from the received field make it possible to reconstruct the images of extended objects observed through an inhomogeneous medium in the presence of strong stationary reflectors. The proposed methods are compared with the Zverev's method of an inverse aperture synthesis in a dark field.     

Optoacoustic imaging with synthetic aperture focusing and coherence weighting

Optoacoustic imaging takes advantage of high optical contrast and low acoustic scattering and has found several biomedical applications. In the common backward mode a laser beam illuminates the image object, and an acoustic transducer located on the same side as the laser beam detects the optoacoustic signal produced by thermoelastic effects. A cross-sectional image is formed by laterally scanning the laser beam and the transducer. Although the laser beam width is generally narrow to provide good lateral resolution, strong optical scattering in tissue broadens the optical illumination pattern and thus degrades the lateral resolution. To solve this problem, a combination of the synthetic aperture focusing technique with coherence weighting is proposed. This method synthesizes a large aperture by summing properly delayed signals received at different positions. The focusing quality is further improved by using the signal coherence as an image quality index. A phantom comprising hair threads in a 1% milk solution was imaged with an optoacoustic imaging system. The results show that the proposed technique improved lateral resolution by 400-800% and the signal-to-noise ratio by 7-23 dB over conventional techniques.     

水下声成像中旁瓣抑制方法及其实验研究

提出了一种近场条件下采用不等间隔阵并进行孔径变迹处理的水下声成像旁瓣抑制方法,并进行了理论和实验研究。考虑以球面波传播理论为基础的聚焦波束形成,首先通过阵元位置微调,设计了可实现低旁瓣的不等间隔阵,从单程波束响应上降低旁瓣;然后,将孔径变迹处理方法应用于水下声成像中,全部阵元用于接收,部分阵元用于发射,从双程波束响应上进一步降低旁瓣。通过水池实验对所提出的方法进行了验证。结果表明:采用不等间隔阵并进行孔径变迹处理可以更为有效地降低旁瓣,而主瓣仅有小量展宽,且该方法工程应用简便易行,在改善成像质量的同时降低了系统复杂度。      

Acoustic imaging based on a mathematical model

A technique for creating an acoustic image based on its mathematical model is proposed. The technique can be used when conventional methods are inapplicable because of the small aperture dimensions relative to the wavelength, the presence of fluctuations, or nonstationary conditions. The essence of the method and its features are illustrated by examples. The method is used to create an image of the angular distribution of scattered signals and of the angular spectrum of signals at the output of an array in a full-scale acoustic experiment.     

时域压缩合成孔径超分辨水声成像算法

提出一种针对水下稀疏目标的时域压缩合成孔径声呐成像方法(TC-SAS),实现了水声目标高分辨实时成像。通过多子阵的孔径合成,在时域上构造出成像网格格点到有效孔径内逐帧阵列的格林函数,并给出成像区域散射强度到数据域的映射矩阵;然后利用该区域空域稀疏的先验知识,通过正交匹配追踪的稀疏重构方式,解算出成像区域散射系数矩阵,实现了稀疏目标高分辨成像.同时,针对线性调频信号提出数据缩减的方法,通过对观测数据和字典矩阵同时脉压后截取,减小了数据规模;进一步结合二维矩阵数表查表的方法,以空间换时间,实现了区块实时成像。数值仿真以及湖试试验表明,所提算法能分辨出传统的时延求和算法难以分辨的目标,并且在图像清晰度指标上平均提升4.9 dB.改善了合成孔径声呐的成像质量.      

基于布拉格声光衍射场的光强非均匀空间分布研究

为了保证合成孔径激光雷达测试中信号光的光束质量,从波动方程出发,推导出传统的衍射光源布拉格声光作用的耦合波方程。根据测试对光束质量的不同要求,借助有限差分方法分析衍射场光强的空间三维分布,发现声场振幅的不均匀分布会影响声光衍射场的光强分布,光强分布不均造成实验中信息光源的探测难度。通过光强空间分布研究增大有效通光孔径到3 mm,解决了声光调制器光束衍射质量问题,改进后的光束质量达到实验要求。该研究方法适用于改进声光器件工作参数。     

Wide-aperture tomography of emissive objects

Classical tomohraphic methods for image reconstruction are constructed based on the assumption that projection data were obtained by integration over infinitely thin lines. However, a detector receiving a signal in a real experiment always has a certain width and, in a more general case, a nonzero angular aperture specified by a collimator. A modified iterative algorithm on the basis of the Neumann technique is proposed that makes it possible to take the actual system of signal recording in the process of reconstruction into account. The computational experiment is carried out on a model simulating local two-dimensional distributions of emission coefficients. Modification of the algorithm consists in the utilization of nonlinear relaxation and regularizing cubic splines. This makes it possible to stabilize the iteration process and to avoid a loss in accuracy when the noise level in projection data increases. The algorithm is also stable to certain parameters variations of the geometry of collection of projection data. The results of reconstruction by using the method proposed here are compared with the results of operation of the classical method of tomography—the method of inverse projection with filtering (Shepp-Logan filter).     

基于支持向量回归的patch近场声全息研究

为了解决patch近场声全息中全息数据外推问题,提出一种基于支持向量回归的一步式patch近场声全息技术。该方法首先把初始全息面上的数据当成训练样本进行学习,构造出回归函数,然后利用回归函数实现全息数据外推,最后基于统计最优近场声全息进行重建。数值仿真和实验研究的结果表明:在各个分析频率下,该方法都可以实现小孔径全息面的近场外推。从近场声全息重建结果看,即使初始全息数据受到噪声干扰,该方法也是一种有效的patch近场声全息技术。      

基于拖曳倾斜线列阵的海底反射损失提取方法

在浅海环境中,海底声学参数对水下声场的精确预报十分重要.现有的海底声学参数反演方法大多数是采用固定垂直阵进行的,其缺点是不能实施大面积、高分辨的走航式反演.在已提出的垂直阵海底反射损失反演方法的基础上,研究了基于三种线列阵阵形的海底反射损失提取方法及其特点,提出了基于拖曳倾斜线列阵与三个声源组合的走航式海底参数快速获取方法,并对该方法进行了误差分析.研究结果表明：覆盖同样的掠射角范围,垂直线列阵需与多个距离的声源组合,拖曳水平线列阵只需一个声源组合但需要采用较大的物理孔径,拖曳倾斜线列阵综合了垂直阵和水平 关键词： 水下声场预报 海底声学参数 海底反射损失 拖曳倾斜线列阵     

Random focusing of sound into spatially coherent regions

Abstract

Oceanographic variability creates a weak random propagation medium for acoustic waves. The impact on acoustic transmission is becoming increasingly appreciated as the deterministic modelling of sound propagation in the ocean has become tractable and better understood. Beyond the near field (where phase fluctuations are weak) and the far field (where the scintillation index becomes saturated) multiple-scattering theory predicts that random focusing will greatly enhance the acoustic energy density over small volumetric regions, which we call ‘ribbons’. In 1986 an experiment was carried out in the eastern Mediterranean to test this prediction using acoustic propagation along distinct, resolvable ray paths. This experiment is one of the few to map the spatial structure of acoustic intensity with such a large vertical aperture, and as far as the authors are aware it remains the only experiment to attempt to detect the two-dimensional structure of the predicted focused ribbons for individual energy paths. Renewed impetus to publish the results has been provided by the recent focus on moderate- to high-frequency acoustics in near-shore and shallow-water environments. The experiment is described and high-intensity regions consistent with the theoretical predictions are reported. A 3.5 kHz pulsed signal was transmitted over ranges of 11–23 km and sampled over a vertical aperture of 250–350 m and horizontal apertures of 4–4.5 km. The acoustic signals travelling along individual ray paths developed randomly focused regions of 6–18 dB over regions with a vertical dimension of about 20 m and whose horizontal length could possibly be up to 1 km. The understanding of these features allows system limitations to be estimated quantitatively and opens up the way to their constructive tactical use. The results are applicable to many systems from towed array sonars to high-frequency bathymetric sidescan and minehunting.     

单声阵列的低空目标轨迹估计方法

针对低空飞行目标轨迹估计问题,提出了一种单传声器阵列的目标运动轨迹估计方法。该方法利用窄带信号的多普勒效应估计出匀速直线运动目标飞行参数,结合波达方向估计计算目标的轨迹方向、水平偏置和高度,依据几何模型确定其运动轨迹,并对信号传播时延造成的估计误差进行修正。仿真和实验结果验证了算法有效性,实现了小孔径单声阵列对目标轨迹的估计。      

A phase regulated back wave propagation technique for geoacoustic inversion

An inversion method based on the concept of back wave propagation (BWP) is described in this paper for estimation of geoacoustic parameters from acoustic field data. A phase-regulation technique is introduced to increase the sensitivity of the method for geoacoustic model parameters having low sensitivity. The case of data consisting of signal plus additive noise is also addressed. It is shown theoretically that the sensitivity can be increased by a factor alpha using the phase regulation procedure, and that the spatial resolution of signal energy that is concentrated by BWP at the known source position is increased when a increases. This result suggests an effective criterion for use in the inversion, based on the spatial distribution of signal energy around the true source location. The basis for the criterion is the spatial variance of the back-propagated pressure field in a window around the known source location. A multistep search process is proposed to avoid using a complicated multidimensional search process. Inversion results from both simulations and experimental data are given. The real data were taken from the Pacific Shelf experiment carried out in shallow water off the West Coast of Vancouver Island in the Northeast Pacific Ocean.     

基于实孔径成像的水下高速小目标末弹道 测量方法

在没有合作声信标和水下弹道测量系统配合的条件下,传统的基线定位法难以测量水下高速小目标末弹道。文中提出了一种测量高速小目标末弹道的方法,该方法通过在靶标上安装实孔径声学成像系统,发射双曲调频信号保持系统在目标回波多普勒偏移量较大时的输出幅值稳定,并采用频域宽带信号处理技术修正多普勒偏移造成的目标方位测量误差和抑制混响干扰,经过湖上试验,系统获取了较清晰的声学图像,准确分辨出目标位置,能够较精确地测量高速小目标末弹道。     

Virtual sensing for broadband noise control in a lightly damped enclosure

Available virtual sensing schemes either depend on assumptions that are valid for isolated frequencies, or require heavy online adaptations. A simple method is proposed here to predict the virtual signal exactly for broadband noise control in a lightly damped enclosure. The proposed method requires two physical sensors installed judiciously in a sound field to predict a virtual signal. The method is based on an exact mathematical relation between the virtual and physical sensors, which is valid for the entire frequency of interest. It is possible to use multiple sensor-pairs to reduce the sensitivity of the proposed method with respect to acoustic parameters, such as speed of sound or sensor mismatching. Experimental results are presented to verify the analytical results.     

Reconstruction of the time dependence and signal parameters of far-field extended wideband sources: Part 1. Reconstruction techniques and technical instruments

The problem of reconstructing the time dependence of an extended source in the far zone is considered. It is shown that the time dependence of the source signal is reconstructable in the far zone during acoustic signal recording with a far-field array and in further processing. In this work, possible signal disturbances due to the finiteness of the receiving aperture are estimated and optimal parameters of the signal processing system are determined. A linear array is suggested in the form of digital receiving elements that synchronously record the acoustic field in a band of up to 10 kHz and transfer the received signal through four twisted pairs directly to a PC network card. The technique described in the work and its technical implementation can be used in hydroacoustic measurements and in designing sound-recording systems for orchestras and large choirs.     

Incoherent signal source resolution based on coherent aperture synthesis

A technique is proposed for resolving two incoherent signal sources of the same frequency and significantly different intensities with similar angular coordinates. The technique is based on aperture synthesis of a receiving array, first, by the signal of higher-power source and the estimate of its angular coordinate with subsequent subtraction of the signal spectrum from the angular spectrum of the received field. This makes it possible to achieve aperture synthesis and estimate the angle of arrival of a higher-power signal. Thus, the technique is of interest not only for synthesized apertures, but also for arrays with a filled aperture, since it eliminates the restrictions imposed by the presence of lateral lobes of the array response. Our mathematical simulation data demonstrate the efficiency of this technique in the detection and location of weak signals against the background of high-power noise sources even at their close angular positions.     

Frequency dependent beating patterns and amplitude increase during the approach of an internal wave packet

A frequency-dependent beating pattern in the spectrogram of broadband signals transmitted during the approach of an internal wave packet to an acoustic propagating path is reported. An analytical expression relating the acoustic signal measurements and environmental parameters under certain conditions is obtained. Three-dimensional parabolic equation modeling results compare well with Shallow Water 2006 experiment data.     

Diffraction of pulsed laser radiation from an acoustic wave with frequency- and phase-shift keying

Bragg acoustooptic diffraction of nanosecond pulsed laser radiation from a frequency- and/or phase-keyed acoustic wave is studied experimentally and theoretically for exact synchronization of laser pulses and signal keying. It is shown that the diffraction field for short pulses is practically stationary and is determined by the positions of acoustic signal keying over signal aperture. The application of this type of signals for the formation of a multibeam diffraction pulsed radiation field is considered. A method is proposed for transforming the angular spectrum of laser radiation intensity from the initial Gaussian to a nearly rectangular spectrum. This may considerably increase the efficiency of high-power technological lasers used in material processing (laser cutting, welding, engraving, etc.), in which the action of radiation is of the thresh-old type in light intensity. The possibility of correcting the angular intensity distribution for a pulsed fiber laser, which increases the thermal efficiency of radiation from such a laser, is established experimentally.