Synthesis of the cytotrienin A core via metal catalyzed C-C coupling

A synthetic approach to the C17-benzene ansamycins via metal catalyzed C-C coupling is described. Key bond formations include direct iridium catalyzed carbonyl crotylation from the alcohol oxidation level followed by chelation-controlled Sakurai-Seyferth dienylation to form the stereotriad, which is attached to the arene via Suzuki cross-coupling. The diene-containing carboxylic acid is prepared using rhodium catalyzed acetylene-aldehyde reductive C-C coupling mediated by gaseous hydrogen. Finally, ring-closing metathesis delivers the cytotrienin core.     

Total synthesis based modification of benzoquinone ansamycin antibiotics: C8 diversification of C5-C15 fragments

Benzoquinone ansamycins are known to be potent Heat shock protein (Hsp90) inhibitors, and total-synthesis-based structure modification of this natural product family may lead to the discovery of novel cancer chemotherapeutics. Described in this paper is a unified synthetic route that gives access to both natural and C-8-modified C5-C15 fragments of this natural product family.     

Ansamycine,eine neuartige Klasse von mikrobiellen Stoffwechselprodukten

Isolation, structure elucidation, and biological properties of a novel class of microbial metabolites, ansamycins, are reviewed as background for the following papers. Structural similarities and differences of ansamycins (rifamycins, tolypomycin, streptovaricins, and geldanamycin) relevant to the common steps in their biogenesis are discussed.     

Particle size distribution in mini-emulsion polymerization

The particle size distribution polydispersities of a number of macro- and mini-emulsion latexes are reported. In cases where the macro-emulsion and mini-emulsions were produced under very nearly identical conditions, the mini-emulsion will have a polydispersity equal to, or only very slightly greater than, the equivalent macro-emulsion. To cite this article: K. Landfester et al., C. R. Chimie 6 (2003).     

Total synthesis of herbimycin A

[structure: see text] Herbimycin A (HA) belongs to a class of antibiotics known as the benzoquinoid ansamycins. Members of this class have shown promising biological activity as Hsp90 inhibitors. An enantioselective synthesis of HA is described, employing asymmetric syn-crotylation methodology to introduce the C10, C11, C14, and C15 stereocenters. The C6-C7 stereocenters were introduced using Brown's alpha-pinene-derived gamma-methoxy allylborane reagent. The C12 stereocenter was established by diastereoselective hydroboration.     

Enantiopure aryl-[1,2,5,6-tetrahydro-pyridinyl] methanols and their use for heterogeneous hydrogenation of ethyl pyruvate

Both enantiomers of two new chiral modifiers (naphthyl- and anthryl-[1,2,5,6-tetrahydro-pyridinyl] methanols, 4H and 5H) are obtained for the first time from inexpensive d-mannitol in 10 easy steps. Until now erythro-4H is the only synthetic chiral modifier available under both enantiomeric forms, which provide enantioselectivities almost as high as those obtained with natural cinchonidine, for which only one enantiomer is available. It is shown that the anthryl group may be less efficient than the naphthyl (the e.e.% drops from 75% with erythro-4H to 46% with erythro-5H) and that N-methyl substitution (trisubstituted nitrogen as in cinchonidine) leads also to a drop in the e.e.% (from 75% with 4H to 39% with 4Me).     

Benzo[f]isoindole derivatives from cycloaddition reaction of 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides

In contrast to the previously reported results in the reaction of maleimides with pyrido[2,1-a]isoindole and 1,2-bis substituted isoindoles, the reaction between 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides leads to the formation of unusual products. Their structure is assessed by NMR and mass spectrometry. An original reaction pathway is proposed. The high quantum yields observed in fluorescence opens the route to applications as biological probes. To cite this article: Z.V. Voitenko et al., C. R. Chimie 9 (2006).     

Anionic surfmers in mini-emulsion polymerisation

Mini-emulsion polymerisation of styrene or methylmethacrylate, initiated with ammonium persulphate, have been carried out, in the presence of hexadecane or of polymethylmethacrylate as hydrophobic costabilizer, and the simple hemiester of linear dodecyl alcohol and maleic anhydride, or polymerisable surfactants (surfmers) derived from the condensation of succinic anhydride and either hydroxy propylmethacrylate (MAES), or hydroxyethylmethacrylate (ABS). While the pure surfmers have not so good surface activity, from surface tension measurements, stable mini-emulsion droplets are obtained using a mixture with low amounts of SDS, which have diameters of about 100–200 nm, which remain stable upon polymerisation. Most of the surfmers remain grafted onto the particle surface, thus conferring to these particles strong stability in the various tests. However, due to the high water solubility of the surfmers, another part remains in the serum as unconverted monomer or water-soluble polymers. To cite this article: A. Guyot et al., C.R. Chimie 6 (2003).     

Technetium transmutation and production of artificial stable ruthenium

The recent Russian results on technetium transmutation into ruthenium are summarized, including the first isolation of artificial stable ruthenium from irradiated technetium targets. To cite this article: V. Peretroukhine et al., C. R. Chimie 7 (2004).

Résumé

Transmutation du technétium et production du ruthénium artificiel. Les résultats obtenus en Russie sur la transmutation du technétium en ruthénium artificiel et son isolement des cibles irradiées sont présentés. Pour citer cet article : V. Peretroukhine et al., C. R. Chimie 7 (2004).     

Solid-state synthesis of boron subnitride, B6N: myth or reality?

Solid-state synthesis of boron subnitride, B₆N, as a result of chemical interaction between boron and boron nitride at 7.5 GPa and 1700 °C has been previously reported by Hubert et al. However, a critical analysis of the results has shown that the evidence for the formation of boron subnitride with B₆O-like structure is inconclusive. We have studied in situ the interaction between boron and BN at the same p–T conditions using X-ray diffraction with synchrotron radiation. At 7.4 GPa and 1700 °C the formation of a new phase has not been observed. At the same time, HP–HT treatment has resulted in strong and unpredictable preferred orientation of boron crystallites. This leads to the rise of some weak boron reflections that might be erroneously attributed to the appearance of a new phase. To cite this article: V.L. Solozhenko et al., C. R. Chimie 9 (2006).     

Cosurfactant effects on the microemulsion polymerization of styrene

The polymerization of styrene in o/w microemulsions stabilized with dodecyltrimethylammonium bromide (DTAB) with or without cosurfactant (n-butanol, n-hexanol or n-octanol) is examined here. The addition of a cosurfactant enhances the one-phase region in the order: n-butanol > n-hexanol > n-octanol. The kinetics of polymerization slows down in the presence of the alcohol. With the alcohol, the molar masses increase, but no particular trend was noticed on particle size of the lattices. However, by changing the surfactant counter-ion to chloride, alcohol effects on the kinetics almost vanish. Possible explanations to these results are given here. To cite this article: J.E. Puig et al., C. R. Chimie 6 (2003).     

Synthesis of polydimethylsiloxane microemulsions by self-catalyzed hydrolysis/condensation of dichlorodimethylsilane

The preparation of PDMS microemulsions was carried out by adding at controlled rate dichlorodimethylsilane (DCMS) in a solution of sodium dodecylpolyoxyethylene(8) sulphate. The instantaneous hydrolysis of DCMS and subsequent condensation of the corresponding dihydroxysilane generate dispersions of cyclosiloxanes of small lengths (4 to 6 D units). The high load of chloride ions released during the hydrolysis step requires the presence of the above-mentioned electrosteric surfactant to avoid rapid coagulation of the dispersion. In addition, its sulphate end-group captures a proton that catalyses the ring-opening polymerization of cyclosiloxane as well as the polycondensation of disilanol PDMS chains. Final particles exhibit a diameter of about 50 nm for a polydispersity index of less than 1.1. They are constituted of PDMS chains exclusively linear ( ; ) and of small cycles in low contents (less than 5 wt% in the best conditions). To cite this article: G. Palaprat, F. Ganachaud, C. R. Chimie 6 (2003).     

The effect of first-stage polymer Tg on the morphology and thermomechanical properties of structured polymer latex particles

A series of heterogeneous latexes having stage ratios of 40:60 between the first and second stage polymers were prepared by emulsion polymerization. The first-stage polymers were non-polar S-BuA with T_gs ranging from + 100 °C to + 20 °C and the second stage polymer was polar MMA–BuA–MAA having a T_g of 20 °C. The latex particle morphologies were studied using TEM and the thermomechanical properties of the resulting latex films were studied with DSC and DMA. Calculated diffusion rates for propagating species during the reactions were correlated to the observed morphologies and to the amount of interphase in the latex particles. To cite this article: O.J. Karlsson et al., C. R. Chimie 6 (2003).     

Recent progress in nitroxide-mediated polymerizations in miniemulsion

Recent developments in nitroxide-mediated polymerizations conducted in emulsion and miniemulsion have advanced the field across a range of both experimental and theoretical fronts. This article reviews progress in bicomponent initiating systems (including use of camphorsulfonic acid to enhance rate), unimolecular initiating systems, miniemulsions not requiring the use of volatile costabilizers, polymerization of acrylates, mathematical modeling and simulation, and theoretical understanding with regards to issues such as compartmentalization, preservation of polymer chain livingness, the role of aqueous phase kinetics and phase partitioning. These topics are discussed and analyzed to present an integrated portrait of the current status of nitroxide-mediated polymerizations in emulsion/miniemulsion and to identify the most pressing concerns, issues, and opportunities. To cite this article: M.F. Cunningham, C. R. Chimie 6 (2003).     

Research and application of inorganic selective sorbents at Mayak PA

This work has been performed in order to identify selective inorganic sorbents for caesium and strontium. Thin-layer sorbents with nickel ferrocyanide embedded in an inert matrix were found to be the best for caesium. Sorbents including non-stoichiometric manganese dioxide were selected for strontium. Bench tests have been carried out on the purification of desalted water of SNF storage-pool from ¹³⁷Cs, and on the purification of contaminated natural water from ⁹⁰Sr. The facility for synthesizing the ferrocyanide sorbent with the registered mark ‘Seleks-CFN’ has been brought into operation. The sorbent ISM-S seems promising for ⁹⁰Sr decontamination. To cite this article: M.V. Logunov et al., C. R. Chimie 7 (2004).

Résumé

Recherches et applications sur l’utilisation de sorbants spécifiques à Mayak. Des sorbants sélectifs du césium et du strontium ont été identifiés. Pour le césium, le meilleur s’avère être le ferrocyanure de nickel, s’il est utilisé sous forme de couche mince. Pour le strontium, on a sélectionné des composés non stœchiométriques de dioxyde de manganèse. On a mené des tests visant à épurer en césium l’eau des piscines d’entreposage des combustibles nucléaires usagés, et en strontium des eaux contaminées. Une installation industrielle permettant de préparer le sorbant à base de ferrocyanure de marque « Seleks-CFN » a été réalisée. Le sorbant ISM-S semble prometteur pour la décontamination en strontium. Pour citer cet article : M.V. Logunov et al., C. R. Chimie 7 (2004).     

Resorcylic acid lactones: A pluripotent scaffold with therapeutic potential

The recent discoveries of potent HSP90 and MAP kinase inhibitors amongst the resorcylic acid lactones (RALs) have revived interest in this family of natural products. Both HSP90 and MAP kinase inhibition hold tremendous therapeutic potential, particularly in the treatment of cancer. Our synthetic efforts towards the RALs and, in particular, selective inhibitors of HSP90 and kinases are reviewed.     

Hybrid copolymer latexes cross-linked with methacryloxy propyl trimethoxy silane. Film formation and mechanical properties

We describe in this work the copolymerization reaction of 3-trimethoxysilyl propyl methacrylate (MPS) with styrene (Styr.) and n-butyl acrylate (BuA) monomers through emulsion polymerization. The so-produced hybrid copolymer (P(BuA-co-MPS)) and terpolymer (P(Styr-co-BuA-co-MPS)) latexes were cast into films that displayed a good optical transparency. The copolymers microstructure in the films was characterized by FTIR, ¹³C and ²⁹Si solid state NMR spectroscopies, and was found to be highly dependent on parameters such as the monomer feed composition, the suspension pH and the silane addition profile. The films obtained from the hybrid latexes showed improved dynamic mechanical properties indicating that a reinforcing organo-mineral network had formed in the composite materials. The dynamic modulus of the hybrids increased with increasing silane contents while, concurrently, the tan δ peak shifted to higher temperatures, broadened and decreased in intensity. To cite this article: S. Vitry et al., C. R. Chimie 6 (2003).     

Viscoelastic behaviour of butyl acrylate/styrene/2-hydroxyethyl methacrylate/acrylic acid latices thickened with associative thickeners

The rheological behaviour of butyl acrylate/styrene/acrylic acid latices thickened with a hydrophobically modified ethoxylated polyurethane (HEUR) or hydrophobically modified alkali-soluble polyacrylate emulsion (HASE) was investigated. While the pseudoplastic character of frequency dependence of complex viscosity was similar for both thickeners, viscoelastic behaviour, expressed as the ratio of loss and storage moduli, significantly differed, indicating that the HEUR molecules, unlike swollen HASE particles, create a viscoelastic space structure. The increase in hydrophilicity of the particle surface, achieved by incorporation of 2-hydroxyethyl methacrylate (HEMA) monomer into the latex copolymer reduced the viscoelasticity of latices thickened with HEUR, but not of those thickened with HASE. This confirms that adsorption of hydrophobic end-groups on particle surface is important for thickening of latices with HEUR and that a physical network of latex particles interconnected by the thickener macromolecules is formed. To cite this article: O. Quadrat et al., C. R. Chimie 6 (2003).     

Modeling of reactive systems in twin-screw extrusion: challenges and applications

Reactive extrusion processes involve the difficulties of mastering classical polymer processes, such as twin-screw extrusion for example, and the problems of controlling a chemical reaction in very specific conditions (high-viscosity medium, high temperatures, short residence times). Therefore, it is often very difficult to intuitively understand all the aspects of the process and to clarify the complex interactions between the numerous variables, and then to properly design and optimize the industrial process. Numerical modeling can be a very efficient tool to overcome these difficulties. However, it remains a real challenge, as it necessitates to couple flow simulation in complex geometry, reaction kinetics and evolutionary rheological behavior. Moreover, the information needed is sometimes difficult to obtain with the required accuracy. After a general presentation of the principles of the different reactive extrusion modeling methodologies, we will focus on the models we developed, based on continuum mechanics. Different examples of applications are presented for illustrating the interest of this method. To cite this article: B. Vergnes et al., C. R. Chimie 9 (2006).     

Lavoisier and meat stock

Antoine-Laurent de Lavoisier published his results on ‘meat stock’ preparation in 1783. Measuring density, he stated that ‘food principles’ were better extracted using a large quantity of water. This result was checked. To cite this article: H. This et al., C. R. Chimie 9 (2006).