新型单分散血清白蛋白印迹微球的制备

以猪血清白蛋白（PSA）为模板,采用分级印迹方法,制备了新型单分散多孔蛋白质表面印迹微球．将PSA吸附在5gm粒径、1000A孔径的球形硅胶表面及孔内后,将甲基丙烯酰胺、甲基丙烯酸为功能单体、甲又双丙烯酰胺为交联剂的聚合物溶液,通过真空负压引入到硅胶孔内,并在室温下聚合24h．反应完成后,用3mol／L NH4HF2刻蚀硅胶,获得形状和结构与硅胶颗粒互补的PSA印迹聚合物微球．竞争吸附实验结果表明,在非模板蛋白质存在的情况下,实现印迹颗粒对模板蛋白的高选择性吸附,选择因子达到3．6,说明该印迹聚合物材料有望成为一种可以同生物抗体相媲美的新型亲和材料．     

柚皮苷分子印迹膜的水相制备与识别

以柚皮苷为印迹分子,PEG为致孔剂,在水相中制备了柚皮苷分子印迹壳聚糖膜.分别讨论了交联剂、致孔剂和印迹分子的用量对印迹膜结构和性能的影响.用SEM观察了致孔剂对印迹膜形貌及孔径的影响.紫外吸收光谱分析、柚皮苷在不同体系中的溶解度变化,以及红外光谱分析的结果表明功能聚合物壳聚糖和模板分子柚皮苷间形成了氢键.膜的渗透实验结果表明,在水相中,柚皮苷分子印迹膜能有效地从新橙皮苷和柚皮苷的混合液中分离出印迹分子柚皮苷,选择透过率为11.16%.     

Low cross-linked molecularly imprinted monolithic column prepared in molecular crowding conditions

Molecular crowding is a new approach to promoting molecular imprinting more efficiently. In this work, this concept was applied to the preparation of low cross-linked imprinted polymers in the presence of an immobilised template for stabilizing binding sites and improving molecular recognition. An imprinted monolithic column was synthesized using a mixture of 2,4-diamino-6-methyl-1,3,5-triazine (template), 2,4-diamino-6-(methacryloyloxy) ethyl-1,3,5-triazine (polymerisable template), methacrylic acid, ethylene glycol dimethacrylate, and polystyrene (molecular crowding agent). Some polymerization factors, such as template-monomer molar ratio, the composition of the porogen and crosslinking density, on the imprinting effect of resulting MIP monolith were systematically investigated. The results indicated that the imprinted monolithic columns prepared in the presence of molecular crowding agent retained affinity and specificity for template even when prepared with a level of cross-linker as low as 9%. Moreover, a stoichiometric displacement model for retention was successfully applied to evaluate the interaction between the solute and the stationary phase. Compared with the low cross-linked MIP prepared by conventional polymerization, the molecular crowding-based low cross-linked monolithic MIPs showed higher selectivity. The results suggested that molecular crowding is a powerful strategy to increase the effect of molecular imprinting at a low level of crosslinker.     

An experimental investigation of the molecularly imprinted polymers as tailor-made sorbents of diazinon

Diazinon imprinted sorbent can be a useful tool for selective enrichment, clean-up, and purification methods. In this study, investigation of synthesis and evaluation of diazinon imprinted polymers has been performed using equilibrium binding experiments. It is possible to use molecularly imprinted polymers as sorbents for anti-choline esterase (Anti-ChE) organophosphate pesticides (Ops). It has been found that MAA monomer is most suitable for the preparation of appropriate diazinon molecularly imprinted polymers (MIPs). The type of porogen also influences the binding results. The best porogen for diazinon imprinting is chloroform due to its poor hydrogen bonding capacity.     

Selective separation and determination of quercetin from red wine by molecularly imprinted nanoparticles coupled with HPLC and ultraviolet detection

In this study, a highly sensitive and selective sample pretreatment procedure using molecularly imprinted silica nanoparticles was developed for the extraction and determination of quercetin in red wine samples coupled with high‐performance liquid chromatography with ultraviolet detection. The imprinted silica nanoparticles were prepared in the presence of N‐acryoyl‐l ‐aspartic acid (functional monomer), quercetin (template), azobisisobutyronitrile (initiator) and methylene bisacrylamide (cross‐linker) and methanol/water (porogen) via surface‐initiated reversible addition‐fragmentation chain transfer polymerization. Surface characterization was performed and several imprinting parameters were investigated, and the results indicated that adsorption of quercetin on the imprinted silica nanoparticles followed a pseudo‐first‐order adsorption isotherm with a maximum adsorption capacity at 26.4 mg/g within 60 min. The imprinted silica nanoparticles also showed satisfactory selectivity towards quercetin as compared with its structural analogues. Moreover, the imprinted nanoparticles preserved their recognition ability even after five adsorption–desorption cycles. Meanwhile, the nanoparticles were successfully applied to selective extraction of quercetin from red wine with a high recovery (99.7–100.4%). The limit of detection was calculated to be 0.058 μg/mL with a correlation coefficient 0.9996 in the range of 0.2–50 μg/mL. As a result, the developed selective extraction method using molecular imprinting technology simplifies the sample pretreatment procedure before determination of quercetin in real samples.     

Silica nanoparticle supported molecularly imprinted polymer layers with varied degrees of crosslinking for lysozyme recognition

Surface imprinting over nanosized support materials is particularly suitable for protein templates, considering the problems with mass transfer limitation and low binding capacity. Previously we have demonstrated a strategy for surface protein imprinting over vinyl-modified silica nanopartiles with lysozyme as a model template by polymerization in high-dilution monomer solution to prevent macrogelation. Herein, the synthesis process was further studied toward enhancement of the imprinting performance by examining the effect of several synthesis conditions. Interestingly, the feed crosslinking degree was found to have a great impact on the thickness of the formed imprinting polymer layers and the recognition properties of the resulting imprinted materials. The imprinted particles with a crosslinking degree up to 50% showed the best imprinting effect. The imprinting factor achieved 2.89 and the specific binding reached 23.3 mg g⁻¹, which are greatly increased compared to those of the lowly crosslinked imprinted materials reported previously. Moreover, the relatively high crosslinking degree led to no significant retarding of the binding kinetics to the imprinted particles, and the saturated adsorption was reached within 10 min. Therefore, this may be a promising method for protein imprinting.     

Binding behaviour of molecularly imprinted polymers prepared by a hierarchical approach in mesoporous silica beads of varying porosity

One of the most interesting methods for preparing molecularly imprinted polymers with controlled morphology consists in filling the pores of silica beads with an imprinting mixture, polymerizing it and dissolving the support, leaving porous imprinted beads that are the "negative image" of the silica beads. The main advantage of such an approach consists in the easy preparation of spherical imprinted polymeric particles with narrow diameter and pore size distribution, particularly indicated for chromatographic applications. In this approach it has been shown that the resulting morphology of polymeric beads depends essentially on the porosity and surface properties of the silica beads that act as microreactors for the thermopolymerization process. Anyway, it is not yet clear if the porosity of the silica beads influences the binding properties of the resulting imprinted beads. In this paper, we report the effect of different porosities of the starting mesoporous silica beads on the resulting binding properties of imprinted polymers with molecular recognition properties towards the fungicide carbendazim. The morphological properties of the imprinted beads prepared through this hierarchical approach were measured by nitrogen adsorption porosimetry and compared with a reference imprinted material prepared by bulk polymerization. The chromatographic behaviour of HPLC columns packed with the imprinted materials were examined by eluting increasing amounts of carbendazim and extracting the binding parameters through a peak profiling approach. The experimental results obtained show that the resulting binding properties of the imprinted beads are strongly affected by the polymerization approach used but not by the initial porosity of the silica beads, with the sole exception of the binding site density, which appears to be inversely proportional to them.     

Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid‐phase extraction

We describe a stoichiometric approach to the synthesis of molecularly imprinted polymers specific for auramine O. Using the stoichiometric interaction in molecular imprinting, no excess of binding sites is necessary and binding sites are only located inside the imprinted cavities. The free base of the template was obtained to facilitate the interaction with the monomers. Itaconic acid was selected as the functional monomer, and stoichiometric ratio of the interaction with the free base was investigated. The molecularly imprinted polymer preparation conditions such as cross‐linker, molar ratio, porogen were optimized as divinylbenzene, 1:2:20 and chloroform/N,N‐dimethylformamide, respectively. Under the optimum conditions, a good imprinting effect and very high selectivity were achieved. A solid‐phase extraction method was developed using the molecularly imprinted polymers as a sorbent and extraction procedure was optimized. The solid‐phase extraction method showed a high extraction recovery for auramine O in its hydrochloride form and free form compared to its analogues. The results strongly indicated that stoichiometric imprinting is an efficient method for development of high selectivity molecularly imprinted polymers for auramine O.     

分子印迹技术制备石油有机硫组分固相萃取剂的研究

用分子印迹技术合成了对石油有机硫组分二苯并噻吩(Dibenzothiophene，DBT)具有高效选择性的分子模板聚合物(Molecularly Imprinted Polymer，MIP)，通过静态吸附的方法研究了不同功能单体和致孔剂及其用量对模板聚合物特异性识别能力的影响．实验表明，以4-乙烯基吡啶(4-VP)为功能单体，在甲苯溶剂中聚合得到的固相萃取剂对DBT具有较大的吸附富集能力和识别特性．其饱和吸附容量达到48．3mg／g．     

Selective Solid-phase Extraction of Aloe Emodin from Aloe by Molecularly Imprinted Polymers

The extraction and separation of aloe emodin were optimized via selective molecularly imprinted solid-phase extraction. Molecularly imprinted polymer was prepared from the functional monomer, methacrylic acid and a mixture of ethanol/dodecanol(90/10, volume ratio) as porogen. It overcomes the common problems of imprin-ting biological polar compounds and shows high selectivity compared favorably with those of non-imprinted polymer and commercially available C₁₈ and silica cartridges in similar aloe emodin tests. Good linearity was obtained between 0.002 and 2.5 mg/mL(r²=0.998) with relative standard deviations below 3.3%.     

Preparation and characterization of molecularly imprinted silica monolith for screening sulfamethazine

In this work, a novel approach of preparing molecularly imprinted film‐derivatized silica monolith materials was developed by a two‐step procedure. The silica monolithic support was first prepared by the sol–gel method with tetramethoxysilane as the precursor. Subsequently, vinyl groups were introduced onto the surface of silica monolith by immobilization of γ‐methacryloxypropyltrimethoxysilane. The prepolymerization mixtures, consisting of methacrylic acid as a functional monomer, ethylene dimethacrylate as a crosslinker, sulfamethazine as a template molecule and an ionic liquid as porogen, were injected into the silica monolith immobilized vinyl groups to form the molecularly imprinted films on the surface of the vinyl functionalized silica monolith. The monolithic materials were characterized by SEM, Fourier transform IR and solid‐state reflection UV spectra. The resulted imprinted materials were evaluated under CEC and HPLC mode. The results indicated that there were enough recognition sites on the surface of the imprinted film‐derivatized monolithic materials for selectively recognizing sulfamethazine from the sulfonamide mixture. Ionic liquids, which was utilized as the porogens, could improve the flow‐through property and the imprinting effect of the molecularly imprinted film‐functionalized silica monolithic materials.     

Tuning of the vinyl groups’ spacing at surface of modified silica in preparation of high density imprinted layer-coated silica nanoparticles: A dispersive solid-phase extraction materials for chlorpyrifos

This paper reports the preparation of high density imprinted layer-coated silica nanoparticles toward selective recognition and fast enrichment of chlorpyrifos (CP) from complicated matrices. The molecularly imprinted polymers (MIPs) were successfully coated at the surface of modified silica through using the chemical immovable vinyl groups at the nanoparticles’ surface, followed by the graft copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) in the presence of templates CP. It has been demonstrated that the space of end vinyl groups at the surface of silica can be controlled by changing the condition of chemical modification, regulating the thickness of imprinted shells and the density of efficient imprinted sites. After removal of templates by solvent extraction, the recognition sites of CP were created in the polymer coating layer. The CP-imprinted nanoparticles exhibited high recognition selectivity and binding affinity to CP analyte. When the CP-imprinted nanoparticles were used as dispersive solid-phase extraction (dSPE) materials, the high recovery yields of 76.1-93.5% from various spiked samples with only 1 μg/mL analyte were achieved by one-step extraction. These results reported herein provide the possibility for the separation and enrichment of CP from complicated matrices by the molecular imprinting modification at the surface of common silica nanoparticles.     

Matrix molecularly imprinted mesoporous sol–gel sorbent for efficient solid-phase extraction of chloramphenicol from milk

Highly selective and efficient chloramphenicol imprinted sol–gel silica based inorganic polymeric sorbent (sol–gel MIP) was synthesized via matrix imprinting approach for the extraction of chloramphenicol in milk. Chloramphenicol was used as the template molecule, 3-aminopropyltriethoxysilane (3-APTES) and triethoxyphenylsilane (TEPS) as the functional precursors, tetramethyl orthosilicate (TMOS) as the cross-linker, isopropanol as the solvent/porogen, and HCl as the sol–gel catalyst. Non-imprinted sol–gel polymer (sol–gel NIP) was synthesized under identical conditions in absence of template molecules for comparison purpose. Both synthesized materials were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and nitrogen adsorption porosimetry, which unambiguously confirmed their significant structural and morphological differences.     

Preparation and application of hollow molecularly imprinted polymers with a super‐high selectivity to the template protein

Protein‐imprinted polymers with hollow cores that have a super‐high imprinting factor were prepared by etching the core of the surface‐imprinted polymers that used silica particles as the support. Lysozyme as template was modified onto the surface of silica particles by a covalent method, and after polymerization and the removal of template molecules, channels through the polymer layer were formed, which allowed a single‐protein molecule to come into the hollow core and attach to the binding sites inside the polymer layer. The adsorption experiments demonstrated that the hollow imprinted polymers had an extremely high binding capacity and selectivity, and thus a super‐high imprinting factor was obtained. The as‐prepared imprinted polymers were used to separate the template lysozyme from egg white successfully, indicating its high selectivity and potential application in the field of separation of protein from real samples.     

Molecularly imprinted polymers on the surface of silica microspheres via sol‐gel method for the selective extraction of streptomycin in aqueous samples

Streptomycin‐imprinted silica microspheres were prepared by combining a surface molecular‐imprinting technique with the sol‐gel method. A mixture of tetrahydrofuran, ethanol, and water (6:1:1, v/v/v) was selected as dispersing solvent while 3‐aminopropyltriethoxysilane and triethoxyphenylsilane acted as functional monomers, and tetraethyl orthosilicate as a cross‐linker. Characterization of the molecularly imprinted polymers was conducted using scanning electron microscope and dynamic binding experiments. As compared to the nonimprinted polymers, the imprinted polymers exhibited a higher degree of saturated adsorption volume up to 26.3 mg/g, and better selectivity even in an aqueous solution with interfering compounds, including dihydrostreptomycin, neomycin, and tetracycline. The adsorption ability and selectivity were observed to be influenced by the mole ratio of 3‐aminopropyltriethoxysilane and triethoxyphenylsilane. Feasibility of the polymers to be used for actual application was also evaluated with spiked samples, indicating great potential for large‐scale applications. Moreover, the streptomycin‐imprinted polymers can be repeatedly used for 12 cycles without losing original performance, which is beneficial for commercial use.     

麻黄碱印迹聚合物合成条件对其形态及结合特性的影响

印迹聚合物合成条件对聚合物性能的影响是分子印迹技术中的一项重要研究内容。以左旋麻黄碱为印迹分子,甲基丙烯酸为功能单体,使用不同的交联剂和致孔剂合成了印迹聚合物,并对所得到的印迹聚合物的比表面积、孔结构和结合特性进行了评价。研究结果说明合成的印迹聚合物对印迹分子具有很好的亲和能力及选择性。致孔剂可以影响聚合物比表面积的大小及单体组成。氯仿是甲基丙烯酸-乙二醇二甲基丙烯酸酯和甲基丙烯酸-季戊四醇三丙烯酸酯聚合链的良溶剂,导致了比表面积及孔容较小的聚合物结构;而以乙腈为致孔剂得到的聚合物有较大的比表面积。共聚物中羧基含量的测定结果也说明,在预聚溶液中单体浓度相同的条件下,以不同的致孔剂进行合成得到的聚合物中甲基丙烯酸的比例不同。聚合物的比表面积及单体浓度的差别都可能导致聚合物的结合容量不同。     

Optimization of serotonin imprinted polymers and recognition study from platelet rich plasma

Molecularly imprinted polymers using serotonin as the template molecule was prepared for selective recognition from platelet rich plasma by non-covalent imprinting approach. Four different monomers (methacrylic acid, acrylamide, 4-vinylpyridine and 2-acrylamido-2-methylpropane sulfonic acid) and acetonitrile and DMSO as porogen were investigated for the first time by bulk polymerization. The molecularly imprinted polymer which was prepared by acrylamide/methacrylic acid had the largest imprinting factor for serotonin. The affinity and specificity of these polymers were evaluated by equilibrium binding experiments. The effect of polarity of the solvents was examined by polymers binding capacity and imprinting factor. According to the Scatchard analysis the K(d) and Q(max) values were calculated as 1.95 micromoll(-1) and 19.129 micromolg(-1), respectively. The polymer was tested to evaluate serotonin from platelet rich plasma and 70% serotonin recovery was found.     

Preparation of core-shell molecularly imprinted polymer via the combination of reversible addition-fragmentation chain transfer polymerization and click reaction

In this paper, we demonstrated an efficient and robust route to the preparation of well-defined molecularly imprinted polymer based on reversible addition-fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne terminated RAFT chain transfer agent was first synthesized, and then click reaction was used to graft RAFT agent onto the surface of silica particles which was modified by azide. Finally, imprinted thin film was prepared in the presence of 2,4-dichlorophenol as the template. The imprinted beads were demonstrated with a homogeneous polymer films (thickness of about 2.27 nm), and exhibited thermal stability under 255°C. The as-synthesized product showed obvious molecular imprinting effects towards the template, fast template rebinding kinetics and an appreciable selectivity over structurally related compounds.     

Interfacial Molecular Imprinting in Nanoparticle-Stabilized Emulsions

A new interfacial nano and molecular imprinting approach is developed to prepare spherical molecularly imprinted polymers with well-controlled hierarchical structures. This method is based on Pickering emulsion polymerization using template-modified colloidal particles. The interfacial imprinting is carried out in particle-stabilized oil-in-water emulsions, where the molecular template is presented on the surface of silica nanoparticles during the polymerization of the monomer phase. After polymerization, the template-modified silica nanoparticles are removed from the new spherical particles to leave tiny indentations decorated with molecularly imprinted sites. The imprinted microspheres prepared using the new interfacial nano and molecular imprinting have very interesting features: a well-controlled hierarchical structure composed of large pores decorated with easily accessible molecular binding sites, group selectivity toward a series of chemicals having a common structural moiety (epitopes), and a hydrophilic surface that enables the MIPs to be used under aqueous conditions.     

A thermosensitive monolithic column as an artificial antibody for the on-line selective separation of the protein

The main objective of this study was to develop a new methodology for the preparation of a protein (antigen) that is a molecularly imprinted polymer (MIP, an artificial antibody) modified onto the surface of a silica skeleton in which the resulting stationary phase is thermosensitive. The silica monolithic skeleton with vinyl groups was synthesized in a stainless-steel column by using a mild one-step sol-gel process with two types of precursor: methyltrimethoxysilane (MTMS) and γ-methacryloxypropyltrimethoxysilane (γ-MAPS). Subsequently, three types of the thermosensitive protein MIP were anchored onto the surface of the silica skeleton to prepare the MIP monoliths, which were systematically investigated for back pressure and separation ability at different temperatures to establish good imprinting conditions. Under the optimized imprinting conditions, the chromatographic behavior of the thermosensitive MIP monolith exhibited strong retention ability for the lysozyme template (target antigen) in relation to the nonimprinting monolith (NIP monolith). The imprinting factor (IF) for lysozyme reached 3.48 at 20 °C. Moreover, this new type of artificial antibody displayed favorable binding characteristics for lysozyme over competitive proteins and was further evaluated to selectively separate lysozyme in a real sample by using an on-line method. The run-to-run and column-to-column repeatability measurements of the thermosensitive MIP monoliths were also satisfactory.