Oxygen dependence of NO adsorption on Hollandite-type K<Subscript>x</Subscript>Ga<Subscript>x</Subscript>Sn<Subscript>8–<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>16</Subscript> thin film

Thin films of hollandite-type K_1.9Ga_1.9Sn_6.1O₁₆ (KGSO) were prepared by a spin-coating method. The films were colorless and transparent, 100-150 nm thick, and consisted of KGSO fine particles of about 20 nm in average size. The adsorption behavior of NO on the KGSO surface was examined by diffuse reflectance infrared fourier transform (DRIFTS). The KGSO was preheated at 968 K in a gas mixture of N₂ and O₂ prior to NO adsorption. As the oxygen ratio in the gas mixture increased up to 40%, absorption bands emerged and became stronger around 1400 cm^-1. Those bands were assigned to NO₂ species in chelating and nitrito form. It was found that the coexistence of oxygen remarkably improves the adsorption ability of NO on KGSO surface.     

Structure of hexaaquamagnesium (II) bis(4-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfamido-2,6-dimethoxypyrimidinate) pentahydrate

The X-ray analysis of a single crystal of Mg(C₁₂H₁₃N₄O₄S)₂·11H₂O, where (C₁₂H₁₃N₄O₄S)^? is the anion of 4-p-aminobenzenesulfamido-2,6-dimethoxypyrimidine (sulfadimethoxine) is carried out. Unit cell parameters are: a = 19.753(4) Å, b = 34.031(7) Å, c = 13.859(3) Å; β = 125.37(3)°, C2/c, Z = 8, R(F) = 0.042. The structure is built of [Mg(OH₂)₆]²⁺, (C₁₂H₁₃N₄O₄S)^?, and water molecules and corresponds to the formula [Mg(OH₂)₆](C₁₂H₁₃N₄O₄S)₂·5H₂O. The IR bands of ν_asymSO₂ and ν_symSO₂ are bathochromically shifted as a result of their participation in hydrogen bonding, and not because of any direct coordination of sulfadimethoxinate anion to the complexing atom through oxygen.     

Anion-directed assembly: Framework conversion in dimensionality and photoluminescence

Six novel Ni(II)-fluconazole complexes formulated as (C₁₃H₁₁N₆OF₂)₂Ni₂(NO₃)₂ (1), (C₁₃H₁₂N₆OF₂)₂Ni(NO₃)₂·H₂O (2), (C₁₃H₁₂N₆OF₂)Ni(SO₄)(DMF)₂(H₂O) (3), (C₁₃H₁₂N₆OF₂)₂Ni(H₂O)₂(SO₄)·4H₂O (4), (C₁₃H₁₂N₆OF₂)₂NiCl₂·2(CH₃OH) (5), (C₁₃H₁₂N₆OF₂)₄Ni₂ (MoO₄)₂·6H₂O (6) have been hydrothermally or solvothermally synthesized under similar conditions except different anions and solvents. They are structurally characterized by elemental analysis, IR, TG and single crystal X-ray diffraction. Complex 1 is a molecular binuclear nickel cluster. Complex 2 exhibits a one-dimensional (1D) chain linked by double-stranded fluconazole-bridge. Complex 3 shows a novel 1D chain linked by double-stranded fluconazole-bridge and double-stranded SO₄²⁻-bridge. Complex 4 shows a three-dimensional (3D) architecture and SO₄²⁻ anions occupy the cavity. Complex 5 exhibits a two-dimensional (2D) structure constructed by alternating left- and right-handed helices. Complex 6 exhibits a 3D architecture, in which the 2D layers are pillared by {MoO₄} tetrahedra. Complex 2 can be irreversibly converted to complex 1 in the presence of DMF (N,N′-dimethyllformamide). Complexes 1, 3 and 6 show antiferromagnetic interactions between the nickel (II) ions The photoluminescence properties of the six complexes indicated that the introduction of different anions can enhance or weaken the intra-ligand transitions of fluconazole.     

Spectrokinetic study of the mechanism of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reduction with propylene over ZrO<Subscript>2</Subscript> in excess oxygen

It has been demonstrated by quantitative spectrokinetic measurements that, on the surface of zirconia stabilized as a tetragonal phase, the rate-limiting step of the selective catalytic reduction of nitrogen oxides (SCR of NO _x ) with propylene is the interaction of surface nitrates with C₃H₆ yielding organic nitro compounds. It is hypothesized that propylene reacts not with the nitrates themselves but with the activated complex NO₂ ^ads whose structure is intermediate between the structures of the monodentate NO₃ ^? and NO₂ species. Deep C₃H₆ oxidation exerts an adverse effect on the rate of the SCR of NO _x with propylene, and the interaction between O₂ and NO, which yields NO₂ and NO₃ ^? stimulates further nitrogen reduction to N₂. The effect of the reaction between oxygen and O₂N?C _n H _m on the NO _x reduction rate is variable and is determined by the C₃H₆/NO _x ratio. A generalized scheme of the SCR of NO _x with propylene on the surface of ZrO₂ partially stabilized as a tetragonal phase has been developed by comparing experimental data of this study and data available from the literature.     

Cp2Ti{[OC(O)C5H4]Cr(CO)2NO]}2 and Cp2Ti{[(OC(O)C5H4]Cr(NO)2X}2 syntheses and spectra of chromium-titanium complexes bridged by carboxylate substituted cyclopentadienyl group

Complete demethylation of Cp₂Ti(CH₃)₂ in dichloromethane with 2 M equivalent of [η⁵-(C₅H₄COOH)]Cr(CO)₂NO (5), [η⁵-(C₅H₄COOH)]Cr(NO)₂X] (X = Cl 6, X = I 7), and [η⁵-(C₅H₄COOH)]W(CO)₃CH₃ (8); gives Cp₂Ti{[OC(O)C₅H₄]Cr(CO)₂NO}₂ (13), Cp₂Ti{[OC(O)C₅H₄]Cr(NO)₂Cl}₂ (14), Cp₂Ti{[OC(O)C₅H₄]Cr(NO)₂I}₂ (15),and Cp₂Ti{[OC(O)C₅H₄]W(CO)₃CH₃}₂ (16), respectively. The chemical shifts of C(2)-C(5) carbon atoms of compounds 13-15 have been assigned using two-dimensional HetCOR NMR spectroscopy. The assigned chemical shifts were compared with the NMR data of their analogues of ferrocene, and the opposite correlation on the assignments was observed for cynichrodenoyl moieties.     

Reactions of N-phenyl-o-semiquinonediimine complexes of nickel and platinum with carbonyl-containing low-valence iron and rhenium compounds

The reactions of o-semiquinonediimine complexes M[o-(NH)(NPh)C₆H₄]₂ (M = Ni (1) or Pt (2)) with carbonyl-containing iron and rhenium compounds were studied. The reactions of complexes 1 or 2 with Fe(CO)₅ afforded the Fe₂(CO)₆[-(NH)(NPh)C₆H₄] complex (3) containing the bridging N-phenyl-o-phenylenediamide ligand in high yield. The reaction of the Re(CO)₂(NO)Cl₂(thf) complex with complex 2 gave rise to the unusual mononuclear rhenium(iii) complex, viz., Re(Ph)[-¹-o-(NH)(NHPh)C₆H₄](CO)(NO)Cl₂ (4), no changes in the geometry of N-phenyl-o-phenylenediamine bound to the Re(NO)(CO)₂Cl₂ fragment being observed. The reaction of complex 2 with the Re(CO)₅Cl complex, which has been preliminarily treated with silver triflate, afforded the heterometallic complex (CO)Pt[-N,N-o-(N)(NPh)C₆H₄]₂ReCl[(NH)(NPh)C₆H₄]. The structures of the resulting complexes were established by X-ray diffraction analysis.     

Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Synthesis and crystal structure of Cu(I) π-complexes with N-allyl-5-amino-1-phenyl-1H-1,2,3-triazole-4-carboxamide [Cu(C12H13N5O)(NO3)] · 0.5H2O and [Cu(C12H13N5O)(CF3COOH)]

Copper(I) ??-complexes of the compositions [Cu(C₁₂H₁₃N₅O)(NO₃)] · 0.5H₂O (1) and [Cu(C₁₂H₁₃N₅O)(CF₃COO)] (2) (C₁₂H₁₃N₅O is N-allyl-5-amino-1-phenyl-1H-1,2,3-triazole-4-carboxamide) were obtained by alternating-current electrochemical synthesis, and their crystal structures were studied by X-ray crystallography. Crystals of the compounds are monoclinic, space group C2/c with the unit cell parameters a = 21.3976(15) ?, b = 8.0335(4) ?, c = 18.6027(13) ?, ?? = 114.422(2)°, V = 2911.6(3) ?³, Z = 8 for 1; and a = 18.3578(18) ?, b = 9.8700(10) ?, c = 20.9094(18) ?, ?? = 106.883(3)°, V = 3625.3(6) ?³, Z = 8 for 2. In both structures, N-allyl-5-amino-1-phenyl-1H-1,2,3-triazole-4-carboxamide acts as a bridging tridentate chelating ligand and forms with copper(I) atoms infinite chains containing [CuC₄NO] seven-membered rings. The chains are linked to form a three-dimensional framework due to hydrogen bonds (N)H??O, which involve nitrogen atoms of amino and amide groups of the ligand. The coordination sphere of Cu(I) atoms consists of olefin bond of the allyl C=C group, O atom of the carbonyl group, N(3) atom of the triazole nucleus of the organic ligand, and an oxygen atom of nitrate (compound 1) or trifluoroacetate (compound 2) anion, respectively.     

Synthesis, characterization and standard molar enthalpy of formation of Nd(C7H5O3)2·(C9H6NO)

The complex from reaction of neodymium chloride six-hydrate with salicylic acid and 8-hydroxyquinoline, Nd(C₇H₅O₃)₂·(C₉H₆NO), was synthesized and characterized by IR, elemental analysis, molar conductance, and thermogravimatric analysis. The standard molar enthalpies of solution of [NdCl₃·6H₂O(s)], [2C₇H₆O₃(s)], [C₉H₇NO(s)] and [Nd(C₇H₅O₃)₂·(C₉H₆NO)(s)] in a mixed solvent of anhydrous ethanol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry at 298.15 K. Based on Hess’ law, a new chemical cycle was designed, and the enthalpy change of the reaction

Experimental and kinetic modeling of the reduction of NO by isobutane in a Jsr at 1 atm

A kinetic study of the reduction of nitric oxide (NO) by isobutane in simulated conditions of the reburning zone was carried out in a fused silica jet‐stirred reactor operating at 1 atm, at temperatures ranging from 1100 to 1450 K. In this new series of experiments, the initial mole fraction of NO was 1000 ppm, that of isobutane was 2200 ppm, and the equivalence ratio was varied from 0.75 to 2. It was demonstrated that for a given temperature, the reduction of NO is favored when the temperature is increased and a maximum NO reduction occurs slightly above stoichiometric conditions. The present results generally follow those reported in previous studies of the reduction of NO by C₁ to C₃ hydrocarbons or natural gas as reburn fuel. A detailed chemical kinetic modeling of the present experiments was performed using an updated and improved kinetic scheme (979 reversible reactions and 130 species). An overall reasonable agreement between the present data and the modeling was obtained. Furthermore, the proposed kinetic mechanism can be successfully used to model the reduction of NO by ethylene, ethane, acetylene, a natural gas blend (methane‐ethane 10:1), propene, and HCN. According to this study, the main route to NO reduction by isobutane involves ketenyl radical. The model indicates that the reduction of NO proceeds through the reaction path: iC₄H₁₀ → C₃H₆ → C₂H₄ → C₂H₃ → C₂H₂ → HCCO; HCCO + NO → HCNO + CO and HCN + CO₂; HCNO + H → HCN → NCO → NH; NH + NO → N₂ and NH + H → followed by N + NO → N₂; NH + NO → N₂O followed by N₂O + H → N₂. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 365–377, 2000     

Graphitic C3N4 Decorated with CoP Co‐catalyst: Enhanced and Stable Photocatalytic H2 Evolution Activity from Water under Visible‐light Irradiation

In this work, graphitic C₃N₄ decorated with a CoP co‐catalyst (g‐C₃N₄/CoP) is reported for photocatalytic H₂ evolution reaction based on two‐step hydrothermal and phosphidation method. The structure of g‐C₃N₄/CoP is well confirmed by XRD, FTIR, TEM, XPS, and UV/Vis diffuse reflection spectra techniques. When the weight percentage of CoP loading is 3.4 wt % (g‐C₃N₄/CoP‐3.4 %), the highest H₂ evolution amount of 8.4×10² μmol g⁻¹ is obtained, which is 1.1×10³ times than that over pure g‐C₃N₄. This value also is comparable with that of g‐C₃N₄ loaded by the same amount of Pt. In cycling experiments, g‐C₃N₄/CoP‐3.4 % shows a stable photocatalytic activity. In addition, g‐C₃N₄/CoP‐3.4 % is an efficient photocatalyst for H₂ evolution under irradiation with natural solar light. Based on comparative photoluminescence emission spectra, photoelectrochemical I –t curves, EIS Nyquist plots, and polarization curves between g‐C₃N₄/CoP‐3.4 % and pure g‐C₃N₄, it is concluded that the presence of the CoP co‐catalyst accelerates the separation and transfer of photogenerated electrons of g‐C₃N₄, thus resulting in improved photocatalytic activity in the H₂ evolution reaction.     

Synthetic and X-ray diffraction studies of borosiloxane cages [R′Si(ORBO)3SiR′] and the adducts of [BuSi{O(PhB)O}3SiBu] with pyridine or N,N,N′,N′-tetramethylethylenediamine

Eleven borosiloxane [R′Si(ORBO)₃SiR′] compounds where R′ = Bu^t and R = Ph (1), 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), 4-CH(O)C₆H₄ (5), CpFeC₅H₄ (6), 4-C(O)CH₃C₆H₄ (7), 4-ClC₆H₄ (8), 2,4-F₂C₆H₃ (9), and R′ = cyclo-C₆H₁₁ and R = Ph (10), and 4-BrC₆H₄ (11) have been synthesized and characterized by spectroscopic (IR, NMR), mass spectrometric and, for compounds where R′ = Bu^t and R = 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), CpFeC₅H₄ (6) and 2,4-F₂C₆H₃ (9), X-ray diffraction studies. These compounds contain trigonal planar RBO₂ and tetrahedral R′SiO₃ units located around 11-atom “spherical” Si₂O₆B₃ cores. The dimensions of the Si₂O₆B₃ cores in compounds 2, 3, 4, 6 and 9 are remarkably similar. The reaction between [Bu^tSi{O(PhB)O}₃SiBu^t] (1), and excess pyridine yields the 1:1 adduct [Bu^tSi{O(PhB)O}SiBu^t]. NC₅H₅ (12) while the reaction between 1 and N,N,N′,N′-tetramethylethylenediamine in equimolar amounts affords a 2:1 borosiloxane:amine adduct [Bu^tSi{O(PhB)O}₃SiBu^t]₂ · Me₂NCH₂CH₂NMe₂ (13). Compounds 12 and 13 were characterised with IR and (¹H, ¹³C and¹¹B) NMR spectroscopies and the structure of the pyridine complex 12 was determined with X-ray techniques.     

Seeking new metalloligands: Synthesis and reactivity of palladacycles with pyridine and pyrimidine rings

Treatment of the Schiff base ligands 4-(NC₅H₄)C₆H₄C(H)N[2′-(OH)C₆H₄] (a), 3,5-(N₂C₄H₃)C₆H₄C(H)N[2′-(OH)-C₆H₄] (b) and 3,5-(N₂C₄H₃)C₆H₄C(H) N[2′-(OH)-5′-^tBuC₆H₃] (c) with palladium (II) acetate in toluene gave the poly-nuclear cyclometallated complexes [Pd{4-(NC₅H₄)C₆H₃C(H)N[2′-(O)C₆H₄]}]₄ (1a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-C₆H₄]}]₄ (1b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃]}]₄ (1c) respectively, as air stable solids, with the ligand acting as a terdentate [C,N,O] moiety after deprotonation of the –OH group. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species [Pd{4-(NC₅H₄)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃)}(PPh₃)], (2c) in which the polynuclear structure has been cleaved and the coordination of the ligand has not changed [C,N,O]. When the cyclometallated complexes 1b and 1c were treated with the diphosphines Ph₂P(CH₂)₄PPh₂ (dppb), Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) and Ph₂P(CH₂)₂PPh₂ (t-dppe) in a 1:2 molar ratio the dinuclear cyclometallated complexes [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3c), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(η⁵-C₅H₄)Fe(η⁵-C₅H₄)PPh₂)], (4b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(η⁵C₅H₄)Fe(η⁵C₅H₄)P-Ph₂)], (4c) and [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CHCH)PPh₂)], (5c) were obtained as air stable solids.     

Fluorinated cotelomers based on vinylidene fluoride (VDF) and hexafluoropropene (HFP): Synthesis, dehydrofluorination and grafting by amine containing an aromatic ring

The synthesis of C₆F₁₃CH₂C(CFCFCF₃)N-C₂H₄-C₆H₅ (11) from the addition of H₂N-C₂H₄-C₆H₅ onto C₆F₁₃CH₂CF₂CF₂CFHCF₃ (3) is presented. C₆F₁₃CH₂CF₂CF₂CFHCF₃ (3) and C₆F₁₃CH₂CF₂CF(CF₃)CF₂H (3′) isomers were obtained from the thermal stepwise cotelomerization of vinylidene fluoride and hexafluoropropene with C₆F₁₃I, followed by the selective reduction of the iodine end atom. At 200 °C, the 3/3′ molar ratio reached 9.0. In contrast to selective reduction, dehydrofluorination led to various derivatives, which were characterized by ¹H NMR and ¹⁹F NMR spectroscopy, and hence a reaction pathway could be suggested. The grafting of an amine containing an aromatic ring onto the cotelomers based on VDF and HFP occurred selectively on VDF/HFP diad and, in some instances a further step involving the formation of an imine was observed. The addition of 2-phenylethylamine onto the dehydrofluorinated intermediates was found to be quantitative.     

Syntheses, characterization and ethylene polymerization of half-sandwich group IV metal complexes with tridentate [O,N,S] ligands

A series of half-sandwich group IV metal complexes with tridentate monoanionic phenoxy-imine arylsulfide [O NS] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N = CHC 6 H 2 O)](La) and dianionic phenoxy-amine arylsulfide [O N S] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N-CH 2 C 6 H 2 O)] 2(Lb) have been synthesized and characterized.Lb was obtained easily in high yield by reduction of ligand La with excess LiAlH 4 in cool diethyl ether.Half-sandwich Group IV metal complexes CpTi[O NS]Cl 2(1a),CpZr[O NS]Cl 2(1b),CpTi[O N S]Cl(2a),CpZr[O N S]Cl(2b) and Cp * Zr[O N S]Cl(2c) were synthesized by the reactions of La and Lb with CpTiCl 3,CpZrCl 3 and Cp * ZrCl 3,and characterized by IR,1 H-NMR,13 C-NMR and elemental analysis.In addition,an X-ray structure analysis was performed on ligand Lb.The title Group IV half-sandwich bearing tridentate [O,N,S] ligands show good catalytic activities for ethylene polymerization in the presence of methylaluminoxane(MAO) as co-catalyst up to 1.58 × 10 7 g-PE.mol-Zr 1.h 1.The good catalytic activities can be maintained even at high temperatures such as 100 ℃ exhibiting the excellent thermal stability for these half-sandwich metal pre-catalysts.     

New Thioantimonates(III) with Different Sb:S Ratios: Solvothermal Syntheses and Crystal Structures of [(C3H10NO)(C3H10N)][Sb8S13], [(C2H8NO)(C2H8N)(CH5N)][Sb8S13], [(C6H16N2)(C6H14N2)][Sb6S10], and [C8H22N2][Sb4S7]

Four new thioantimonates(III) with compositions [(C₃H₁₀NO)(C₃H₁₀N)][Sb₈S₁₃] ( 1 ) (C₃H₉NO = 1‐amino‐3‐propanol, C₃H₉N = propylamine), [(C₂H₈NO)(C₂H₈N)(CH₅N)][Sb₈S₁₃] ( 2 ) (C₂H₇NO = ethanolamine, C₂H₇N = ethylamine, CH₅N = methylamine), [(C₆H₁₆N₂)(C₆H₁₄N₂)][Sb₆S₁₀] ( 3 ) (C₆H₁₄N₂ = 1,2‐diaminocyclohexane) and [C₈H₂₂N₂][Sb₄S₇] ( 4 ) (C₈H₂₀N₂ = 1,8‐diaminooctane) were synthesized under solvothermal conditions. Compound 1 : triclinic space group P$\bar{1}$ , a = 6.9695(6) Å, b = 13.8095(12) Å, c = 18.0354(17) Å, α = 98.367(11), β = 96.097(11) and γ = 101.281(11)°; compound 2 : monoclinic space group P2₁/m, a = 7.1668(5), b = 25.8986(14), c = 16.0436(11) Å, β = 96.847(8)°; compound 3 : monoclinic space group P2₁/n, a = 11.6194(9), b = 10.2445(5) Å, c = 27.3590(18) Å, β = 91.909(6)°; compound 4 : triclinic space group P$\bar{1}$ , a = 7.0743(6), b = 12.0846(11), c = 13.9933(14) Å, α = 114.723(10), β = 97.595(11), γ = 93.272(11)°. The main structural feature of the two atoms thick layered [Sb₈S₁₃]^2– anion in 1 are large nearly rectangular pores with dimensions 11.2 × 11.7 Å. The layers are stacked perpendicular to [100] to form tunnels being directed along [100]. In contrast to 1 the structure of 2 contains a [Sb₈S₁₃]^2– chain anion with Sb₁₂S₁₂ pores measuring about 8.9 × 11.5 Å. Only if longer Sb–S distances are considered as bonding interactions a layered anion is formed. The chain anion [Sb₆S₁₀]^2– in compound 3 is unique and is constructed by corner‐sharing SbS₃ pyramids. Two symmetry‐related single chains consisting of alternating SbS₃ units and Sb₃S₃ rings are bound to Sb₄S₄ rings in chair conformation. Finally, in the structure of 4 the SbS₃ and SbS₄ moieties are joined corner‐linked to form a chain of alternating SbS₄ units and (SbS₃)₃ blocks. Neighboring chains are connected into sheets that contain relatively large Sb₁₀S₁₀ heterorings. The sheets are further connected by sulfur atoms generating four atoms thick double sheets.     

A twofold interpenetrating two‐dimensional zinc(II) coordination polymer: synthesis,crystal structure and physical properties

A novel twofold interpenetrating two‐dimensional (2D) Zn^II coordination framework, poly[[(μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene‐κ²N³:N³)(μ‐naphthalene‐2,6‐dicarboxylato‐κ²O²:O⁶)zinc(II)] dimethylformamide monosolvate], {[Zn(C₁₂H₆O₄)(C₁₄H₁₄N₄)]·C₃H₇NO}_n or {[Zn(1,3‐BMIB)(NDC)]·DMF}_n (I), where H₂NDC is naphthalene‐2,6‐dicarboxylic acid, 1,3‐BMIB is 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene and DMF is dimethylformamide, was prepared and characterized through IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Single‐crystal X‐ray diffraction analysis revealed that (I) exhibits an unusual twofold interpenetrating 2D network. In addition, it displays strong fluorescence emissions and a high photocatalytic activity for the degradation of Rhodamine B (RhB) under UV‐light irradiation.     

Peculiarities of dissociative ionization of alkylcyclopentadienyl nitrosyl π-complexes of nickel

The decomposition of alkylcyclopentadienyl nitrosyl -complexes of nickel, (C₅H₄R)(NO)Ni (R=H, Et,i-Pr, CH₂Ph), under the action of electron impact has been studied. The nature of the nitrosyl ligand has been shown to be the factor determining the main fragmentation pathway which involves the abstraction of an NO molecule. The effect of the nature of the ligand on the ability of the molecular ion (C₅H₄R)LNi⁺ (L=C₅H₄R, C₅H₅, C₃H₅, NO) to rearrange with hydrogen atom migration from one ligand to another has been considered. The structure of the alkyl group R determines a competing fragmentation pathway involving cleavage of the -C-C bond with respect to the cyclopentadienyl ring in the substituent.Translated fromIzyestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1985–1988, November, 1993.     

Threefold interweaving of (4,4) nets built from R(58) rings in the hydrogen‐bonded adduct 1,4‐diaza­bicyclo[2.2.2]octane–5‐hydroxy­isophthalic acid (1/1)

The 1:1 adduct of 1,4‐di­aza­bi­cyclo­[2.2.2]­octane and 5‐hydroxy­isophthalic acid is a salt, [H(C₆H₁₂N₂)]⁺·­[HOC₆H₃(COOH)COO]^? or C₆H₁₃N₂⁺·C₈H₅O₅^?. The ions are linked by three types of hydrogen bond, i.e. N—H?O, O—H?O and O—H?N, into continuous two‐dimensional (4,4) nets built from a single type of R(58) ring. Six independent sheets of this type make up the structure and these are interwoven in sets of three.