Biodegradation of biomass gasification wastewater by two species of Pseudomonas using immobilized cell reactor

An immobilized cell bioreactor with granular activated carbon as the inert material inoculated two species, Pseudomonas sp1 and Pseudomonas sp2, to degrade chemical oxygen demand (COD) and benzene, naphthalene, phenanthrene, pyridine, quinoline, and isoquinoline in the wastewater discharging from a biomass gasification power-generation plant. The results indicated that these toxic compounds were removed efficiently. The course of the 66-d experiment was divided into three phases mainly in accordance with different influent COD concentrations: microbial adaptation and proliferation phase (from 1 to 23 d), stable metabolic phase (from 24 to 57 d), and high efficient reaction phase (from 58 to 66 d). The high removal rates of COD and some toxic compounds with a 24-h hydraulic retention time were accomplished.     

Treatment of dairy wastewater using a selected bacterial isolate, Alcaligenes sp. MMRR7

Physicochemical and biologic analysis of dairy wastewater showed that the effluent had a high organic load (chemical oxygen demand [COD]: 5095 mg/L), an acidic pH (6.4), and a high probability of coliforms (most probable number [MPN]>1100). The various bacterial strains isolated and purified were identified as Sporolactobacillus sp., Citrobacter sp., Pseudomonas sp., Alcaligenes sp., Bacillus sp., Staphylococcus sp., and Proteus sp., as per the Bergey’s manual of systematic bacteriology. Among the five selected bacterial strains, the strain designated as MMRR₇ and identified as Alcaligenes sp. was found to give a maximum reduction in COD (62%) in 5 d of incubation. Chemical coagulation using alum at a concentration of 0.5 g/100 mL was found to be effective in the primary treatment of the effluent. Studies on free-cell treatment of the coagulated effluent with the selected bacterial strain Alcaligenes sp. MMRR₇ gave a maximum COD reduction of 91% in 120 h. This study clearly indicates the possibility of using Alcaligenes sp. MMRR₇ for the effective treatment of dairy wastewater.     

Influence of oxygen availability on cell growth and xylitol production by Candida guilliermondii

Oxygen availability is the most important environmental parameter in the production of xylitol by yeasts, directly affecting yields and volumetric productivity. This work evaluated the cell behavior in fermentations carried out with different dissolved oxygen concentrations (0.5–30.0% of saturation), as well as a limited oxygen restriction (0% of saturation), at several oxygen volumetric transfer coefficients (12 ≤ k _L a ≤ 70 h⁻¹). These experiments allowed us to establish the specific oxygen uptake rate limits to ensure high yields and volumetric productivity. When oxygen availability was limited, the specific oxygen uptake rate values were between 12 and 26 mg of O₂/of g cell·h, resulting in a yield of 0.71 g of xylitol/xylose consumed, and 0.85 g/[L·h] for the volumetric productivity. According to the results, the effective control of the specific oxygen uptake rate makes it possible to establish complete control over this fermentative process, for both cell growth and xylitol production.     

Development of a membrane-based vapor-phase bioreactor

A vapor-phase bioreactor has been developed utilizing porous metal membranes in a cylindrical design employing radial flow as opposed to traditional axial flow for the vapor stream. The system was evaluated for the biodegradation ofp-xylene (p-xylene) from a water-saturated air stream byPseudomonas putida ATCC 23973 immobilized onto sand. The biocatalyst was placed in the annular space between two cylindrical, porous stainless-steel membranes. Details of the reactor system are presented along with biological data verifying system performance. The feed flow rate andp-xylene concentration were varied between 60 and 130 cm³/min and 15–150 ppm, respectively. Continuous reactor operation was maintained for 80–200 h with removal efficiencies (based onp-xylene disappearance) between 80 and 95%. The effluent concentration histories were compared to determine the operating range of the bioreactor.     

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Synthesis and characterization of conductive polyaniline/TiO2 composite nanofibers

Fibrillar conductive polyaniline/TiO₂ (PANI/TiO₂) nanocomposites with different TiO₂ amount were synthesized with a template-free in situ polymerization method and characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and conductivity measurement. The morphology determination shows that the PANI/TiO₂ composite nanofibers are relatively uniform with the diameter and length in the range of 20–40 nm and 390–420 nm respectively. It also shows that the TiO₂ of the composite is rutile crystalline and PANI has some degree of crystallinity. The IR measurement indicates that there is a strong interaction between the PANI and TiO₂ nanoparticles, and it has a beneficial effect on the thermal stability of the composite nanofiber. The conductivity of PANI/TiO₂ composites changes with TiO₂ amount and reaches an optimum value of 2.86 S/cm at 11.1 wt% TiO₂. Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(4): 67–70 (in Chinese)     

Synthesis and Characterization of Polyoxometalate–Polyamino Dendritic Hybrid Compounds

Organic–inorganic hybrid compounds were prepared by the reaction of a tin chloride-substituted polyoxometalate, [PSn(Cl)W₁₁O₃₉]⁴⁻ with tris(2-aminoethyl)amine, and poly(propylene)imine (DAB-Am) tetraamine and octaamine dendrimers. Translational diffusion coefficients of the hybrid compounds were measured in DMSO-d ₆ by the stimulated echo diffusion (STE) NMR technique. Molecular radii were derived from the diffusion coefficients by the Stokes–Einstein equation and appeared to be incorrect because of fast exchange on the NMR time scale of the counter cation in the solution, which led to an averaging of the NMR signal and high diffusion coefficients. An effective hydrodynamic diameter of the [PSn(Cl)W₁₁O₃₉]⁴⁻–polypropylenimine octaamine hybrid adduct was measured in a light scattering experiment.     

Redox-induced hydrogen transfer from hydrofullerene C60H36 to fullerene C60

The possibility of hydrogen transfer from hydrofullerene C₆₀H₃₆ to electrogenerated radical anion C₆₀ ^.− or dianion C₆₀ ²⁻ in propylene carbonate-toluence (3∶2, v/v) was demonstrated by cyclic voltammetry. The process affords C₆₀H₂ as the product. The reaction found is the typical redox-induced process. Translated fromIzvestiya Akodemii Nauk. Seriya Khimicheskaya, No. 6, pp. 1136–1139, June, 1998.     

Isomerism in OBe3F3 + cation: anab initio study

Ab initio MP2/6-31G^*//HF/6-31G^*+ZPE(HF/6-31G^*) calculations of the potential energy surface in the vicinity of stationary points and the pathways of intramolecular rearrangements between low-lying structures of the OBe₃F₃ ⁺ cation detected in the mass spectra of μ₄-Be₄O(CF₃COO)₆ were carried out. Ten stable isomers with di- and tricoordinate oxygen atoms were localized. The relative energies of six structures lie in the range 0–8 kcal mol⁻¹ and those of the remaining four structures lie in the range 20–40 kcal mol⁻¹. Two most favorable isomers, aC _2v isomer with a dicoordinate oxygen atom, planar six-membered cycle, and one terminal fluorine atom and a pyramidalC _3v isomer with a tricoordinate oxygen atom and three bridging fluorine atoms, are almost degenerate in energy. The barriers to rearrangements with the breaking of one fluorine bridge are no higher than 4 kcal mol⁻¹, except for the pyramidalC _3v isomer (∼16 kcal mol⁻¹). On the contrary, rearrangements with the breaking of the O−Be bond occur with overcoming of a high energy barrier (∼24 kcal mol⁻¹). A planarD _3h isomer with a tricoordinate oxygen atom and linear O−Be−H fragments was found to be the most favorable for the OBe₃H₃ ⁺ cation, a hydride analog of the OBe₃F₃ ⁺ ion; the energies of the remaining five isomers are more than 25 kcal mol⁻¹ higher. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 420–430, March, 1999.     

Effects of glucose,glutamine, and malate on the metabolism of spodoptera frugiperda clone 9 (sf9) cells

Optimal design and operation of bioreactors for insect cell culture is facilitated by functional relations providing quantitative information on cellular metabolite consumption kinetics, as well as on the specific cell growth rates (μ_G). Initial specific consumption rates of glucose, malate, and oxygen, and associated changes in μ_G, were measured forSpodoptera frugiperda clone 9 (Sf9) cells grown in batch suspension culture in medium containing 7–35 mM glucose, 0–16 mM malate, and 4–16 mM glutamine. The initial specific glucose consumption rate (q _G ) could be described by a modified Michaelis-Menten equation treating malate as a “competitive” inhibitorK ₁ = 6.5 mM) and glutamine as a “noncompetitive” inhibitorK _I = 14 mM) ofq _G , with aK _m of 7.1 mM for glucose. All three carbon sources were found to increase μ_G in a saturable manner, and a modified Monod equation was employed to describe this relationship (μ_Gmax = 0.047 h^-1). The initial specific oxygen consumption rate (q_O2) in Sf9 cells could be related to μ_G by the maintenance energy model, and it was calculated that, under typical culture conditions, about 15–20% of the cellular energy demand comes from functions not related to growth. Fitted parameters in mathematical expression for μg: K₄, Monod constant for glucose (mM); K₅, modified Monod constant for malate (mM); K₆, Monod constant for glutamine (mM); m_o2, specific consumption rate of oxygen by the cells under zero-growth conditions (nmol/cell/h); q_F, initial specific fumarate production rate (nmol/cell/ h);q _G , initial specific glucose consumption rate (nmol/cell/h); q_Gmax, maximum initial specific glucose consumption rate (nmol/cell/h);q _M , initial specific malate consumption rate (nmol/cell/h); q_o2, initial specific oxygen consumption rate (nmol/cell/h); Y_o2, cell yield on oxygen (cells/nmol); μ, initial specific cell growth rate (h^-1); μ_g, initial specific cell growth rate (h^-1); μG_max, maximum initial specific cell growth rate (h^-1).     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Sodium and silver phosphate glasses doped with chlorides of Fe,Mn and Zn

A number of samples of sodium and silver phosphate glasses doped with various compositions of some transition metals viz. iron, manganese and zinc chlorides alongwith undoped samples of sodium and silver phosphate glasses were synthesized and characterized by X-ray diffraction, IR spectral, electrical conductivity and differential scanning calorimetry (DSC). The glass transition temperature (T _g) and crystallization temperature (T _c) values obtained from DSC curves were found to increase with increasing concentration of the dopant Fe/Mn/Zn chlorides in both sodium and silver phosphate glasses and the following sequence is observed: T _g(–FeCl₃)>T _g(–MnCl₂)>T _g(–ZnCl₂) T _c(–FeCl₃)>T _c(–MnCl₂)>T _c(–ZnCl₂) The increase in T _g and T _c values indicate enhanced chemical durability of the doped glasses. The electrical conductivity values and the results of FTIR spectral studies have been correlated with the structural changes in the glass matrix by the addition of different transition metal cations as dopants.     

Partial Deuterium Labeling of Dimethacrylate Monomers

Summary. Methacrylic acid-d₅ was prepared in a yield of 30% with 98.6% deuterium incorporation using a two step synthesis. A solution of acetone-d₆ and KCN in D₂O was treated with glacial acetic acid to give the cyanohydrin of acetone-d₆. The latter compound was then dehydrated in anhydrous sulfuric acid at 120°C and subsequently hydrolysed in water at 90°C to form methacrylic acid-d₅. Hydrolysis of commercial nonaethyleneglycol dimethacrylate gave a mixture of ethylene glycols. These glycols were combined with methacrylic acid-d₅ in the presence of p-TsOH in benzene to form nonaethyleneglycol dimethacrylate-d₁₀ with ∼21% deuterium incorporation. Deuterated bisGMA was also prepared from methacrylic acid-d₅ and diglycidyl ether of bisphenol-A. Present address: Boron Molecular Pty Ltd, PO Box 756, Noble Park, VIC 3174, Australia     

Conversion of ammonia to dinitrogen in wastewater by Nitrosomonas europaea

Because Nitrosomonas europaea contains ammonia-oxidizing enzyme, nitrite reductase, and nitrous oxide reductase, the conversion of ammonia to dinitrogen was tried with different reaction conditions. In aerobic reaction conditions, ammonium was converted to nitrite (NO ₂ ⁻ ), while under oxygen-limiting or oxygen-free conditions, NO ₂ ⁻ -N formed from ammonia oxidation by N. europaea was reduced to N₂O and dinitrogen with 22% conversion. During denitrification, optimal pH for the production of N₂O and dinitrogen was found to be 7.0–8.0. Dinitrogen was not produced in acidic pH<7.0. A low partial oxygen pressure as well as oxygen-free conditions are favorable for high production of dinitrogen.     

Facile preparation and electrochemical properties of large-scale Li<Subscript>1+<Emphasis Type="Italic">x</Emphasis></Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript> nanobelts

Large-scale Li_1+x V₃O₈ nanobelts were successfully fabricated using filter paper as deposition substrate through a simple surface sol–gel method. The nanobelts were as long as tens of micrometers with widths of 0.4–1.0 μm and thickness of 50–100 nm. The nanobelts were characterized by X-ray diffration (XRD), Fourier infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM). The formation mechanism of the nanobelts was investigated, showing that the morphology of the nanobelts is mainly determined by the calcination temperature. Electrochemical properties of the Li_1+x V₃O₈ nanobelts were characterized by charge–discharge experiments, and the results demonstrate that the Li_1+x V₃O₈ nanobelts exhibit a high discharge capacity (278 mAh g⁻¹) and excellent cycling stability.     

Effect of strontium substitution on the activity of La2?xSrxNiO4 (x = 0.0–1.2) in NO decomposition

The aim of this work is to study the effect of Sr substitution on the redox properties and catalytic activity of La_2−x Sr _x NiO₄ (x = 0.0–1.2) for NO decomposition. Results suggest that the x = 0.6 sample shows the highest activity. The characterization (TPD, TPR, etc.) of samples indicates that the x = 0.6 sample possesses suitable abilities in both oxidation and reduction, which facilitates the proceeding of oxygen desorption and NO adsorption. At temperature below 700°C, the oxygen desorption is difficult, and is the rate-determining step of NO decomposition. With the increase of reaction temperature (T > 700°C), the oxygen desorption is favorable and, the active adsorption of NO on the active site (NO + V _o + Ni²⁺ → NO⁻-Ni³⁺) turns out to be the rate-determining step. The existence of oxygen vacancy is the prerequisite condition for NO decomposition, but its quantity does not relate much to the activity. Supported by the National Hi-Tech Research and Development Program of China (863 Program)(Grant No. 2004CB 719502) and the National Natural Science Foundation of China (Grant No. 20177022)     

Conformational Analysis,Infrared, and Fluorescence Spectra of 1-Phenyl-1,2-propandione 1-oxime and Related Tautomers: Experimental and Theoretical Study

Summary. Conformational analysis and frequency calculation were achieved for 1-phenyl-1,2-propandione 1-oxime and its four tautomers: 1-nitroso-1-phenyl-1-propen-2-ol, 1-nitroso-1-phenyl-2-propanone, 2-hydroxy-1-phenyl-propenone oxime, and 3-nitroso-3-phenyl-propen-2-ol. Calculations were carried out at the Hartree–Fock (HF), Density Functional Theory (B3LYP), and the second-order M?ller–Plesset perturbation (MP2) levels of theory using 6-31G^* and 6-311G^** basis sets. Five conformers with no imaginary vibrational frequency were obtained by free rotations around three single bonds of 1-phenyl-1,2-propandione-1-oxime: Ph–C(NOH)C(O)CH₃, PhC(NOH)–C(O)CH₃, and PhC(N–OH)C(O)CH₃. Similarly, eight structures with no imaginary vibrational frequency were encountered upon rotations around three single bonds of 1-nitroso-1-phenyl-1-propen-2-ol: Ph–C(NO)C(OH)CH₃, PhC(N–O)C(OH)CH₃, and PhC(NO)C(–OH)CH₃. In the same manner, six minima were found through rotations around three single bonds of 1-nitroso-1-phenyl-2-propanone: Ph–CH(NO)C(O)CH₃, PhCH(–NO)C(O)CH₃, and PhCH(NO)–C(O)CH₃. Also, two minima were found through rotations around four single bonds of 2-hydroxy-1-phenyl-propenone oxime: Ph–C(NOH)C(OH)CH₂, PhC(N–OH)C(OH)CH₂, PhC(NOH)–C(OH)CH₂, and Ph-C(NOH)C(–OH)CH₂. Finally, two minima were found through rotations around four single bonds of 3-nitroso-3-phenyl-propen-2-ol: Ph–CH(NO)C(OH)CH₂, PhCH(–NO)C(OH)CH₂, PhCH(NO)–C(OH)CH₂, and PhCH(NO)C(–OH)CH₂. Interconversions within the above sets of conformers were probed through scanning (one and/or two dimensional), and/or QST3 techniques. The order of the stability of global minima encountered was: 1,2-propandione-1-oxime > 1-nitroso-1-phenyl-2-propanone > 1-nitroso-1-phenyl-1-propen-2-ol > 2-hydroxy-1-phenyl-propenone oxime > 3-nitroso-3-phenyl-propen-2-ol. Hydrogen bonding appears significant in tautomers of 1-nitroso-1-phenyl-1-propen-2-ol and 2-hydroxy-1-phenyl-propenone oxime. The CIS simulated λ_max for the first excited singlet state (S₁) of 1-phenyl-1,2-propandione 1-oxime is 300.4 nm, which was comparable to its experimental λ_max of 312.0 nm. The calculated IR spectra of 1-phenyl-1,2-propandione 1-oxime and its tautomers were compared to the experimental spectra.     

Gamma radiation induced effects on slaughterhouse wastewater treatment

A preliminary study using gamma radiation on slaughterhouse wastewater samples was carried out. Chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total suspended solids (TSS) results were obtained at a dose rate of 0.9 kGy h⁻¹. A decrease of COD, BOD and colour was observed after irradiation at high absorbed doses. The microbiological results, following irradiation in the same conditions, correlated with the BOD results. The results obtained highlight the potential of this technology for wastewater treatment.     

Complexes of titanium(IV) chloride with N-(3,5-R,R′-salicylidene)-2(3,4)-[bis(5-methyl-2-furyl)methyl]aniline, a novel type of phenoxyimine catalysts for olefin polymerization

New representatives of chelate-type titanium(IV) salicylideneaniline complexes with bis(5-methyl-2-furyl)methyl substituents in the aniline fragment are synthesized. In the presence of poly(methylalumoxane), these complexes catalyze ethylene and propylene polymerization. The effect of the position of substituents in the ligands on the activities of the catalysts is studied. High-molecular-weight linear polyethylene (M _w ≈ 172200–300000, M _w/M _n ≈ 2–3) and high-molecular-weight atactic elastic polypropylene (M _w ≈ 1000000, M _w/M _n ≥ 7.0) are obtained. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1730–1737, October, 2006.     

Recovery by means of electrodialysis of an aromatic amino acid from a solution with a high concentration of sulphates and phosphates

In the industrial synthesis of -α-p-hydroxyphenylglycine the separation of the amino acid is carried out by precipitation. During this process, a mother liquor is produced with a high salt content (phosphates and sulphates) and an amino acid concentration of approximately 0.12–0.15 M. The disposal of this mother liquor not only causes an environmental problem due its high salinity and COD (chemical oxygen demand) content but also an economic loss due to the high price of the unrecovered amino acid. To avoid this problem an electrodialytic process has been developed that allows the recovery of 85% of the amino acid in the form of a low salinity stream with a salt content 70% lower than that of the initial mother liquor. This low salinity stream can be incorporated into the main process and in this way the amino acid can be recovered.