Magnetic control of bioelectrocatalytic processes based on assembled iron oxide particles

A facile magnetic control system was designed in bioelectrocatalytic process based on functionalized iron oxide particles. The iron oxide particles were modified with glucose oxidase, and ferrocene dicarboxylic acid was used as electron transfer mediator. Functionalized iron oxide particles can assemble along the direction of applied magnetic field, and the directional dependence of the assembled iron oxide particles can be utilized for device purposes. We report here how such functionalized magnetic particles are used to modulate the bioelectrocatalytic signal by changing the orientation of the applied magnetic field.     

Surface-assisted laser desorption/ionization mass spectrometry on titania nanotube arrays

Titania nanotube arrays (NTA) generated from anodizing processes are tested as the substrate for surface-assisted laser desorption/ionization mass spectrometry (SALDI MS). The background generated from titania NTA is very low, making the approach suitable for the analysis of small molecules. The upper detectable mass is approximately 29 kDa. Homogeneous sample deposition leads to good shot-to-shot reproducibility and suitability for quantitative analysis. Additionally, phosphopeptides can be selectively trapped on the titania NTA substrate, as illustrated by simply depositing a tryptic digest of beta-casein followed by titania NTA SALDI MS analysis. The detection limit for small organics and peptides is in low fmol.     

Enrichment of phosphopeptides using bare magnetic particles

Magnetic iron(II, III) oxide (magnetite, Fe(3)O(4)) nanoparticles were used to selectively enrich phosphopeptides from tryptic digests of bovine beta-casein and from tryptic digest mixtures containing bovine beta-casein, cytochrome c, bovine serum albumin, and horse heart myoglobin. The magnetic property of the particles permits an easy and speedy enrichment process. No enrichment of phosphopeptides was observed from ferric magnetic iron(III) oxide (Fe(2)O(3)) nanoparticles. These data collectively demonstrate that the enrichment of phosphopeptides using magnetic iron(II, III) oxide nanoparticles is a practical method for the selective analysis of phosphopeptides and could be helpful in isolating and analyzing phosphorylated peptides from complex biological samples.     

A novel approach of combining thin-layer chromatography with surface-assisted laser desorption/ionization (SALDI) time-of-flight mass spectrometry

A novel means of combining thin-layer chromatography (TLC) with laser desorption/ionization mass spectrometry using a liquid matrix is proposed. Surface-assisted laser desorption/ionization (SALDI) mass spectrometry, which uses a mixture of a micrometer-sized carbon powder (graphite or activated carbon, the SALDI solid) and 15% sucrose/glycerol, dissolved in an equal volume of methanol (SALDI liquid) as a SALDI matrix, is used for laser desorption mass analysis. The ablation of carbon powder from a pencil drawing was used as an alternative to the SALDI solid. The liquid matrix resembled that used in a conventional SALDI matrix system. A line was drawn before separation with a pencil on the track of the sample developed on the TLC plate. After TLC separation, approximately 0.1 microl of SALDI liquid was directly applied to the chromatographic spots on the TLC plate. Porphyrins were used to demonstrate this combination owing to the visible colors of this type of compound. The analyte signal can be easily detected by irradiating the laser along the pencil line on the TLC plate. An additive, p-toluenesulfonic acid, is added to the SALDI liquid to enhance the signal's intensity. This additive dramatically improves the signal-to-noise ratio. A detection limit of approximately 500 pg is demonstrated for porphines, which is 50 times better than that corresponding to conventional TLC SALDI.     

Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Using surfactants to enhance the analyte signals in activated carbon, surface-assisted laser desorption/ionization (SALDI) mass spectrometry

The effect of surface activity in surface-assisted laser desorption/ionization (SALDI) mass spectrometry was examined. Several surfactants, including p-tolunensulfonic acid (PTSA), sodium dodecyl sulfate and alkyltrimethylammonium bromide, were used as analytes or additives in the SALDI matrix to demonstrate the surface activity effect. The experimental results demonstrate that analytes that have good surface activity have good sensitivity. Adding suitable amounts of surfactants to the SALDI matrix can dramatically enhance the sensitivity of analytes lacking surface activity. We propose that the enhancement of analyte signals is due to the ionic interaction between ionic surfactants and analytes because non-ionic surfactant additives in the SALDI matrix do not affect the analyte signals. The detection limit of methylephedrine can be as low as 100 pg in the SALDI analysis of 0.5 M PTSA additive in the SALDI matrix. Although other surfactants can also be used as matrix additives to enhance the analyte signal, they do not improve the ion abundance as much as PTSA does.     

Occurrence and prevention of photodissolution at the phase junction of magnetite and titanium dioxide

A stable magnetic photocatalyst was prepared by coating a magnetic core with a layer of photoactive titanium dioxide. A direct deposition of titanium dioxide onto the surface of magnetic iron oxide particles proved ineffective in producing a stable magnetic photocatalyst, with high levels of photodissolution being observed with these samples. This observed photodissolution is believed to be due to the dissolution of the iron oxide phase, induced by the photoactive the titanium dioxide layer due to electronic interactions at the phase junction in these magnetic photocatalysts. The introduction of an intermediate passive SiO₂ layer between the titanium dioxide phase and the iron oxide phase inhibited the direct electrical contact and hence prevented the photodissolution of the iron oxide phase. The magnetic photocatalyst is for use in slurry-type reactors from which the catalyst can be easily recovered by the application of an external magnetic field.     

Iron oxide coated gold nanorods: synthesis, characterization, and magnetic manipulation

We report a simple process to generate iron oxide coated gold nanorods. Gold nanorods, synthesized by our three-step seed mediated protocol, were coated with a layer of polymer, poly(sodium 4-styrenesulfonate). The negatively charged polymer on the nanorod surface electrostatically attracted a mixture of aqueous iron(II) and iron(III) ions. Base-mediated coprecipitation of iron salts was used to form uniform coatings of iron oxide nanoparticles onto the surface of gold nanorods. The magnetic properties were studied using a superconducting quantum interference device (SQUID) magnetometer, which indicated superparamagnetic behavior of the composites. These iron oxide coated gold nanorods were studied for macroscopic magnetic manipulation and were found to be weakly magnetic. For comparison, premade iron oxide nanoparticles, attached to gold nanorods by electrostatic interactions, were also studied. Although control over uniform coating of the nanorods was difficult to achieve, magnetic manipulation was improved in the latter case. The products of both synthetic methods were monitored by UV-vis spectroscopy, zeta potential measurements, and transmission electron microscopy. X-ray photoelectron spectroscopy was used to determine the oxidation state of iron in the gold nanorod-iron oxide composites, which is consistent with Fe2O3 rather than Fe3O4. The simple method of iron oxide coating is general and applicable to different nanoparticles, and it enables magnetic field-assisted ordering of assemblies of nanoparticles for different applications.     

Heating and separation using nanomagnet-functionalized metal-organic frameworks

A magnetic functionalization of microcrystalline MOF particles was realized using magnetic iron oxide particles. Such magnetic MOFs can be separated using a static magnetic field after use in catalytic processes and heated by an external alternating magnetic field to trigger desorption of encaged drug molecules.     

Metallorganic routes to nanoscale iron and titanium oxide particles encapsulated in mesoporous alumina: formation, physical properties, and chemical reactivity

Iron and titanium oxide nanoparticles have been synthesized in parallel mesopores of alumina by a novel organometallic "chimie douce" approach that uses bis(toluene)iron(0) (1) and bis(toluene)titanium(0) (2) as precursors. These complexes are molecular sources of iron and titanium in a zerovalent atomic state. In the case of 1, core shell iron/iron oxide particles with a strong magnetic coupling between both components, as revealed by magnetic measurements, are formed. M?ssbauer data reveal superparamagnetic particle behavior with a distinct particle size distribution that confirms the magnetic measurements. The dependence of the M?ssbauer spectra on temperature and particle size is explained by the influence of superparamagnetic relaxation effects. The coexistence of a paramagnetic doublet and a magnetically split component in the spectra is further explained by a distribution in particle size. From M?ssbauer parameters the oxide phase can be identified as low-crystallinity ferrihydrite oxide. In agreement with quantum size effects observed in UV-visible studies, TEM measurements determine the size of the particles in the range 5-8 nm. The particles are mainly arranged alongside the pore walls of the alumina template. TiO2 nanoparticles are formed by depositing 2 in mesoporous alumina template. This produces metallic Ti, which is subsequently oxidized to TiO2 (anatase) within the alumina pores. UV-visible studies show a strong quantum confinement effect for these particles. From UV-visible investigations the particle size is determined to be around 2 nm. XPS analysis of the iron- and titania- embedded nanoparticles reveal the presence of Fe2O3 and TiO2 according to experimental binding energies and the experimental line shapes. Ti4+ and Fe3+ are the only oxidation states of the particles which can be determined by this technique. Hydrogen reduction of the iron/iron-oxide nanoparticles at 500 degrees C under flowing H2/N2 produces a catalyst, which is active towards formation of carbon nanotubes by a CVD process. Depending on the reaction conditions, the formation of smaller carbon nanotubes inside the interior of larger carbon nanotubes within the alumina pores can be achieved. This behavior can be understood by means of selectively turning on and off the iron catalyst by adjusting the flow rate of the gaseous carbon precursor in the CVD process.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

Analysis of estrogens in water by magnetic octadecylsilane particles extraction and sweeping micellar electrokinetic chromatography

A method based on magnetic separation was developed for the extraction of several estrogens (including diethylstilbestrol, estrone and estriol) in water followed by sweeping micellar electrokinetic chromatography (MEKC) analysis with UV detection. Novel magnetic octadecylsilane (ODS) particles were prepared using a silanization method with octadecyl trimethoxysilane as the surface modification reagent of magnetic Fe₃O₄ particles. Octadecyl trimethoxysilane was covalently immobilized on the magnetic iron oxide particles. The particles were used as the sorbents in the magnetic separation for the extraction of trace amounts of estrogens from water. The extraction condition and efficiency of the particles for the estrogens were investigated. Combining the magnetic ODS particles extraction and sweeping MEKC with UV detection, the estrogens at concentrations as low as ng/mL in water can be detected without interference from other substances in the sample matrix.     

Preparation and characterization of submicron hybrid magnetic latex particles

Micrometer magnetic hybrid particles are of great interest in biomedical field, and various morphologies have been prepared via encapsulation processes. Regarding submicron, only few processes have been investigated and the most recent one leading to highly magnetic submicron magnetic hybrid particles is based on oil in water magnetic emulsion (MES) transformation. The encapsulation of magnetic iron oxide nanoparticles forming oil in water MES was investigated using different styrene/cross‐linker divinylbenzene volume ratio in the presence of potassium persulfate initiator. The encapsulation performed in this work is basically conducted by using well‐defined oil in water MES as a seed in radical emulsion polymerization. The chemical composition, morphology, iron oxide content, magnetic properties, electrokinetic properties, particle size, and size distribution of the prepared magnetic hybrid particles were examined using various techniques. The desired perfect magnetic core and polymer shell morphology were successfully obtained, and the final magnetic hybrid particles are superparamagnetic in nature and exhibit high iron oxide content (64 wt %). Copyright © 2015 John Wiley & Sons, Ltd.     

Templated nucleation of hybrid iron oxide nanoparticles on polysaccharide nanogels

Novel organic–inorganic hybrid nanoparticles consisting of polymer–hydrogel nanoparticles (nanogels) and iron oxide were developed for potential biomedical applications. Hybrid nanoparticles were prepared by a simple procedure using polysaccharide nanogels as a reactive site for iron oxide formation. The hybrid nanoparticles have a narrow size distribution with a diameter of approximately 30 nm and show high colloidal stability. These nanohybrid particles could be used as a contrast medium for magnetic resonance imaging or for magnetic hyperthermia therapy.     

The Orbitrap mass analyzer with direct ion injection interfaced to a laser desorption/ionization ion source

The results of a study on interfacing an Orbitrap mass analyzer with direct ion injection to a surface assisted laser desorption/ionization (SALDI) ion source are presented. Osmium complexes with 8-mercaptoquinoline were studied. Titanium oxide thin films prepared by electron beam evaporation were found an effective emitter of the ions of the test complexes. It was demonstrated that interfacing the Orbitrap mass analyzer to a SALDI source can significantly improve the analytical performance of this method in comparison to a typical combination of SALDI/time-of-flight mass spectrometer.     

Synthesis and characterization of heat-stabilized albumin magnetic microspheres

Human serum albumin magnetic microspheres containing 30% iron oxide particles were synthesized by a heat-stabilization process. The average diameter, the size distribution and the morphology were characterized by scanning electron microscopy, atomic force microscopy and transmission electron microscopy. The distribution of the iron oxide nanoparticles within the microspheres was confirmed by the contrast obtained in the morphology by backscattered electron imaging in scanning electron microscopy. Energy-dispersive X-ray spectroscopy showed the presence of iron in the microspheres. The cabbage like surface structure in some of the microspheres obtained in scanning electron microscopy can be better understood by atomic force microscopy. This peculiar surface structure in the microsphere may be due to the cross-linking in the protein molecule by heat. The amount of iron oxide in the microsphere was analyzed by atomic absorption spectroscopy. The magnetic properties of the particles were measured in a superconducting quantum interference device magnetometer. Received: 12 September 2000 Accepted: 5 February 2001     

Modification of superparamagnetic iron oxide nanoparticles with poly(diallyldimethylammonium chloride) at air atmosphere

Superparamagnetic iron oxide particles with average size less than 20 nm were prepared by chemical co‐precipitation method in the air atmosphere. After that, polydimethyldiallyl ammonium chloride (PDDA) was used for wrapping iron oxide particles to obtain the core/shell nanocomposites. The parameters influencing properties of iron oxide particles and iron oxide/PDDA nanocomposites were investigated and optimized. The prepared iron oxide and nanocomposites were characterized by X‐ray diffraction (XRD) measurement, transmission electron microscopy (TEM), particle size and Zeta potential analyzer, Fourier transform infrared (FTIR) spectroscopy, and vibrating sample magnetometry (VSM), respectively. It was found that the iron oxide particles are cubic inverse spinel Fe₃O₄ with spherical shape. Superparamagnetic behavior of Fe₃O₄ with 73.114 emu/g is produced with NH₄OH as precipitator, and decreased to 58.583 emu/g for Fe₃O₄/PDDA nanocomposites. The Zeta potential of nanocomposites is positive value. The results showed that Fe₃O₄/PDDA nanocomposites have excellent future using as a carrier for bonding with some negative charged particles. Copyright © 2016 John Wiley & Sons, Ltd.     

Functionalization of magnetic nanoparticles with amphiphilic block copolymers: self-assembled thermoresponsive submicrometer particles

For the first time the four block copolymers derived from 1-alkyl[2-(acryloyloxy)ethyl]dimethylammonium bromides with hexyl (ADA) or cetyl (ADHA) groups and 2-hydroxyethylacrylate (HEA) or N-isopropylacrylamide (NIPAM) were synthesized and employed for functionalization of monodisperse iron oxide nanoparticles (NPs). The polyADA (pADA) or polyADHA (pADHA) block consists of long hydrophobic tails (C(6) or C(16)) connected to a positively charged quaternary ammonium group, making this block amphiphilic. The second block was either fully hydrophilic (pHEA) or thermoresponsive (pNIPAM). The dependence of the NP coating on the length of the hydrophobic tail in the amphiphilic block, the composition of the hydrophilic block, and the NP sizes have been studied. Unusual self-assembling of iron oxide NPs into well-defined composite submicrometer particles was observed for pADHA-b-pNIPAM in the wide range of concentrations (at the pADHA repeating unit concentrations of 0.065 × 10(-2)-2.91 × 10(-2) mmol/mL per 1 mg/mL NPs) but only two concentrations, 1.62 × 10(-2) and 1.94 × 10(-2) mmol/mL, led to regular spherical particles. The thermoresponsive behavior of these composite particles was tested using ζ-potential and dynamic light scattering measurements, while the morphology of particles was characterized by transmission electron microscopy. Coating of NPs with pADHA-b-pHEA results in the formation of individually coated NPs. The different composite particle morphologies are explained by different properties of pHEA and pNIPAM. It is demonstrated that the composite particles based on pADHA-b-pNIPAM are responsive to a magnetic field and can be recommended as magnetic stoppers in biorelated membrane separations. The incorporation of Pd species in submicrometer particles makes them promising candidates for catalytic applications as magnetically recoverable catalysts with a high magnetic response.     

Particle dispersibility and giant reduction in dynamic modulus of magnetic gels containing barium ferrite and iron oxide particles

The particle dispersibility of barium ferrite and iron oxide magnetic particles in carrageenan gels was investigated, and the influence of the dispersibility on the giant reduction in the dynamic modulus of the gels was discussed. The gels containing barium ferrite demonstrated giant reductions in the storage Young's modulus on the order of 10 (5) Pa due to magnetization; however, small reductions in the storage modulus of less than 10 (4) Pa were observed for the gels containing iron oxide. The storage modulus of gels with barium ferrite did not follow the Krieger-Dougherty equation above volume fractions of 0.06, indicating the heterogeneous dispersion of the magnetic particles; however, the modulus of the gels with iron oxide satisfied the equation at all volume fractions, suggesting the random dispersion of the particles. It was noted that the gels with barium ferrite demonstrated enhanced nonlinear viscoelasticity and a large value of the loss tangent, while the gels with iron oxide exhibited weak nonlinear viscoelasticity and a small value of the loss tangent. Magnetic measurements indicated high values of remanent magnetization for barium ferrite and low values for iron oxide. After magnetization at 1 T, the magnetic gels with barium ferrite became elongated parallel to the magnetic field and shrunk perpendicular to the field. In contrast, the magnetic gels with iron oxide did not undergo a marked deformation. These results strongly indicate that the giant reduction in the storage modulus requires both enhanced nonlinear viscoelasticity and magnetostriction which originate from the particle dispersibility. The relationship between the dispersibility of magnetic particles and the giant reduction in the storage modulus is discussed using rheological and morphological data.     

Rapid determination of trace nitrophenolic organics in water by combining solid-phase extraction with surface-assisted laser desorption/ionization time-of-flight mass spectrometry

A rapid technique for the screening of trace compounds in water by combining solid-phase extraction (SPE) with activated carbon surface-assisted laser desorption/ionization (SALDI) time-of-flight mass spectrometry is demonstrated. Activated carbon is used both as the sorbent in SPE and as the solid in the SALDI matrix system. This eliminates the need for an SPE elution process. After the analytes have been adsorbed on the surfaces of the activated carbon during SPE extraction, the activated carbon is directly mixed with the SALDI liquid and mass spectrometric analysis is performed. Trace phenolic compounds in water were used to demonstrate the effectiveness of the method. The detection limit for these compounds is in the ppb to ppt range.