Preparation of new π‐conjugated polypyrroles by organometallic polycondensations. Synthesis of N‐BOC (t‐butoxycarbonyl) and N‐phenylethynyl polymers,thermal deprotection of the BOC Group,and packing structure of the N‐phenylethynyl polymer

New π–conjugated polypyrroles such as poly(3‐heptyl‐N‐(t‐butoxycarbonyl)pyrrole‐2,5‐diyl), PPr(3‐Hep; N‐BOC) , and poly(N‐(phenylethynyl)pyrrole‐2,5‐diyl‐alt‐thiophene‐2,5‐diyl), Copoly‐2 , were prepared by organometallic polycondensations using the corresponding 2.5‐dihalopyrroles as the starting materials. Deprotection of the BOC group of PPr(3‐Hep; N‐BOC) proceeded at 185 °C to give poly(3‐heptylpyrrole). XRD (X‐ray diffraction) data of Copoly‐2 indicated that Copoly‐2 assumed a stacked structure in the solid. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6223–6232, 2005     

Side chain length affects backbone dynamics in poly(3‐alkylthiophene)s

Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T₁) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1193–1202     

New copolymers with thieno[3,2‐b]thiophene or dithieno[3,2‐b:2′,3′‐d]thiophene units possessing electron‐withdrawing 4‐cyanophenyl groups: Synthesis and photophysical,electrochemical, and electroluminescent properties

New monomers containing 4‐cyanophenyl (–PhCN) groups attached to a thieno[3,2‐b]thiophene (TT) or dithieno[3,2‐b:2′,3′‐d]thiophene (DTT) structure were synthesized and characterized as 4‐(2,5‐dibromothieno[3,2‐b]thiophen‐3‐yl)benzonitrile (Br–TT–PhCN) or 4,4′‐(2,6‐dibromodithieno[3,2‐b:2′,3′‐d]thiophene‐3,5‐diyl)dibenzonitrile (Br–DTT–PhCN). The Suzuki coupling of 9,9‐dioctylfluorene‐2,7‐diboronic acid bis(1,3‐propanediol)ester and the Br–TT–PhCN or Br–DTT–PhCN monomer was utilized for the syntheses of novel copolymers poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3‐(4′‐cyanophenyl)thieno[3,2‐b]thiophene‐2,5‐diyl} (PFTT–PhCN) and poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3,5‐bis(4′‐cyanophenyl)dithieno[3,2‐b:2′,3′‐d]thiophene‐2,6‐diyl} (PFDTT–PhCN), respectively. The photophysical, electrochemical, and electroluminescent (EL) properties of these novel copolymers were studied. Their photoluminescence (PL) exhibited the same emission maximum for both copolymers in solution. Red‐shifted PL emissions were observed in the thin films. The PL emission maximum of PFTT–PhCN was more significantly redshifted than that of PFDTT–PhCN, indicating more pronounced excimer or aggregate formation in PFTT–PhCN. The ionization potential (HOMO level) and electron affinity (LUMO level) values were 5.54 and 2.81 eV, respectively, for PFTT–PhCN and were 5.57 and 2.92 eV, respectively, for PFDTT–PhCN. Polymer light‐emitting diodes (LEDs) with copolymer active layers were fabricated and studied. Anomalous behavior and memory effects were observed from the current–voltage characteristics of the LEDs for both copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2629–2638     

MÖSsbauer Spectroscopic Study of Fecl3 Complexes of Poly(N-Methyl-2,5-Pyrrolylene), Poly(2,5-Thienylene), and Poly(3-Methyl-2,5-Thienylene) Prepared by Ni-Catalyzed Polycondensation

Reaction of FeCl₃ with poly(N-methyl-2,5-pyrrolylene) (PNMPy), poly(2,5-thienylene) (PTh), and poly(3-methyl-2,5-thienylene) (P3MeTh) caused reduction of FeCl₃ to afford Fe²⁺ species. Variable temperature Mössbauer spectra of the reaction systems indicated formation of FeCl₂ and FeCl^? ₄. The latter is regarded as a counter-anion for the cation delocalized along the π-conjugated polymer chain.     

Regioregular head‐to‐tail poly(6‐alkylpyridine‐2,5‐diyl)s and a new type of packing structure of the polymer in the solid state

New regioregular head‐to‐tail type poly(6‐alkylpyridine‐2,5‐diyl)s (P6RPys; R = nonyl, dodecyl, and pentadecyl) were prepared by organometallic polycondensation. The head‐to‐tail (HT) content in the polymers was higher than 95%, as revealed by ¹H NMR spectroscopy. Powder X‐ray diffraction data of HT‐P6RPys indicated that P6RPys formed a new type of structure composed of an alternating end‐to‐end packed unit and an interdigitation packed unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 215–222, 2005     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Capillary electrophoretic separation and computational modeling of inclusion complexes of β‐cyclodextrin and 18‐crown‐6 ether with primaquine and quinocide

The antimalarial drug primaquine (PQ) and its contaminant, the positional isomer quinocide (QC) have been successfully separated using capillary electrophoresis with either β‐cyclodextrin (β‐CD) or 18‐crown‐6 ether (18C6) as chiral mobile phase additive. The interactions of the drugs with cyclodextrins and 18C6 were studied by the semiempirical method (Parametric Model 3) PM3. Theoretical calculations for the inclusion complexes of PQ and QC with α‐CD, β‐CD and 18C6 were performed. Data from the theoretical calculations are correlated and discussed with respect to the electrophoretic migration behavior. More stable complexes are predicted for the PQ–β‐CD and PQ–18C6 complexes. The coelution of PQ and QC when α‐CD was used as buffer additive can be explained by their comparable stabilities of the inclusion complex formed, while significant differences in the complexation stabilities of the drugs with β‐CD is responsible for their separation. The stronger hydrogen bonding in PQ–18C6 system is responsible for the separation between PQ and QC when 18C6 was used as chiral mobile phase additive. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,hole mobility,and photovoltaic properties of two alternating poly[3‐(hex‐1‐enyl)thiophene‐co‐thiophene]s

Two alternating poly[3‐(hex‐1‐enyl)thiophene‐co‐thiophene]s, Pa (with 77% trans‐isomer and 23% cis‐isomer) and Pb (with 100% trans‐isomer), were synthesized by the coupling of 2,5‐dibromo‐3‐hex‐1‐enyl‐thiophene to 2,5‐bis(tributylstannyl)thiophene via a Stille reaction and compared with poly(3‐hexylthiophene‐co‐thiophene) ( P1 ) to study the effect of changing the carbon(α)–carbon(β) single bond into a carbon–carbon double bond on the properties of the polymers. From P1 to Pb and to Pa , the ultraviolet–visible absorption peaks of the polymers were slightly redshifted, and their electrochemical bandgaps decreased by 0.05–0.1 eV. X‐ray diffraction analysis indicated that Pa had a better lamellar structure than Pb . The hole mobilities of the three polymers, determined with the space‐charge‐limited current model, were 5.23 × 10^?6 ( P1 ), 2.34 × 10^?4 ( Pb ), and 7.02 × 10^?4 cm²/V s ( Pa ). The power conversion efficiencies (PCEs) of polymer solar cells based on the three polymers were 0.87 ( P1 ), 1.16 ( Pb ), and 1.70% ( Pa ). The increase in the hole mobility and PCE revealed the important effect of changing the carbon(α)–carbon(β) single bond into a carbon–carbon double bond on the properties of polythiophene derivatives containing 3‐alkylthiophene. The strategy used in this work enlarges the thinking to obtain novel, efficient donor polymers for optoelectronic applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 629–638, 2007     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Studies of degradation behaviors of poly (3‐hexylthiophene) layers by X‐ray photoelectron spectroscopy

Degradation behaviors of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) layers on NiO in the presence of H₂O at ambient pressure and dark conditions were studied using X‐ray photoelectron spectroscopy (XPS). Upon H₂O exposure at 120 °C, partial oxidation of P3HT together with molecular water incorporation, but with the maintained local ring‐structure, were deduced by XPS. Valence band spectra of XPS evidenced that the partial oxidation of P3HT local structure could alter π‐conjugation systems of P3HT layers, forming additional electronic states close to its original highest occupied molecular orbital. For comparison, P3HT surface was also exposed to O₂, and no change in the S 2p and C 1s spectra was found by O₂ exposure at 120 °C, implying that H₂O plays a major role at the initial stage of P3HT oxidation. Copyright © 2014 John Wiley & Sons, Ltd.     

Structure and Photochemical Behavior of the Cyclodextrin Inclusion Complexes of the Benzoylthiophene‐Derived Drugs Tiaprofenic Acid (=5‐Benzoyl‐α‐methylthiophene‐2‐acetic Acid) and Suprofen (=α‐Methyl‐4‐(2‐thienylcarbonyl)benzeneacetic Acid)

The effect of β‐cyclodextrin (β‐CD) on the excited‐state reactivity of the two benzoylthiophene derivatives, tiaprofenic acid (TPA; 2 ) and suprofen (SPF; 3 ) in their carboxylate forms is studied. The presence of β‐cyclodextrin does not affect the nature of the photoproduced transients and the photoproducts, but increases the photodegradation quantum yields of both drugs. The efficiency of the photodecarboxylation process is enhanced. This effect is rationalized in the light of the inclusion of 2 and 3 in the β‐CD cavity, affecting the energy of the lowest excited states of the drugs. The structure of the complexes is determined by induced circular dichroism, and molecular‐mechanics and dynamic Monte Carlo calculations. The photoreactivity of the decarboxylated photoproduct 7 of tiaprofenic acid ( 2 ) in presence of β‐CD is also examined.     

β-环糊精与有机胺之间包合作用的理论与实验研究

通过实验和理论计算方法研究了β-环糊精(CD)与乙二胺1及它的三个类似物: 二乙烯三胺2、三乙胺3和乙二胺四乙酸4之间的包合作用. 利用旋光法确定了β-CD与客体分子形成1:1型主–客体包合物, 在298.2 K下测定了包合物在水中的稳定常数(K). 采用半经验PM3方法考察了β-CD与短链脂肪胺1~7、环状脂肪胺8~11以及芳香胺12~13的分子间结合能力, 报道了β-CD与这些客体分子间的包合络合过程并讨论了这些包合体系之间的包合差异性. 变形能和水合能对包合体系的相互作用能的贡献均相当小. β-CD包合物的稳定性取决于主、客体分子之间的尺寸匹配. 对于β-CD与客体1~4形成的包合物而言, 旋光法测定的包合物的K值的顺序与PM3计算得到的包合物络合能绝对值的排序有很好的一致性.     

Simple synthesis,photophysics, and electroluminescent properties of poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9, 9‐diyl‐alt‐alkane‐α,ω‐diyl]

A simple synthetic route was used for the synthesis of a novel series of alternating copolymers based on substituted 2,7‐distyrylfluorene bridged through alkylene chains. First, 2,7‐dibromofluorene was reacted with 2 equiv of butyllithium, and this was followed by a treatment with 1 equiv of α,ω‐dibromoalkane to yield the intermediate, poly(2,7‐dibromofluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl). ( 1 ) Heck coupling of the latter with 1‐tert‐butyl‐4‐vinylbenzene afforded the target, poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl] ( 2 ). The two versions of 2 ( 2a and 2b which have hexane and decane, respectively, as alkane groups) were readily soluble in common organic solvents. Their glass‐transition temperature was relatively low (52 and 87 °C). An intense blue photoluminescence emission with maxima at about 408 and 409 nm was observed in tetrahydrofuran solutions, whereas thin films exhibited an orange emission with maxima at 569 and 588 nm. Very large redshifts of the photoluminescence maxima and Stokes shifts in thin films indicated strong aggregation in the solid state. Both polymers oxidized and reduced irreversibly. Single‐layer light‐emitting diodes with hole‐injecting indium tin oxide and electron‐injecting aluminum electrodes were fabricated. They emitted orange light with external electroluminescence efficiencies of 0.52 and 0.36% photon/electron, as determined in light‐emitting diodes made of 2a and 2b , with alkylenes of (CH₂)₆ and (CH₂)₁₀, respectively. An increase in the external electroluminescence efficiency up to 1.5% was reached in light‐emitting diodes made of polymer blends consisting of 2a and poly(9,9‐dihexadecylfluorene‐2,7‐diyl), which emitted blue‐white light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 809–821, 2007.     

Synthesis and characterization of new π‐conjugated polymers containing 1,8‐naphthyridine in the main chain: Role of the 1,8‐naphthyridine unit in π‐conjugated polymers

Alternating π‐conjugated copolymers of 1,8‐naphthyridine‐2,6‐diyl ( 1,8‐Nap ) with 9,9‐dioctylfluorene‐2,7‐diyl ( P(Flu‐Ph‐1,8‐Nap) ) and 2,5‐didodecyloxy‐1,4‐phenylene ( P(ROPh‐Ph‐1,8‐Nap) ) have been synthesized by Pd‐catalyzed organometallic polycondensation. The copolymers showed UV‐vis absorption peaks at around 390 nm in o‐dichlorobenzene. The polymers were photoluminescent both in o‐dichlorobenzene and in the solid state. In o‐dichlorobenzene, the emission peaks of P(Flu‐Ph‐1,8‐Nap) and P(ROPh‐Ph‐1.,8‐Nap) appeared at λ_EM = 440 and 471 nm, with quantum yields of 87% and 66%, respectively. Electrochemical data revealed that 1,8‐Nap behaved as a typical electron‐accepting unit. When P(Flu‐Ph‐1,8‐Nap) was treated with 10‐camphorsulfonic acid, the emission peak shifted to λ_EM = 598 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation and characterization of poly(ethylene oxide)‐loaded hydroxypropyl‐β‐cyclodextrin nanofibers

Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) is a modified β‐cyclodextrin (β‐CD) derivative, which is toxicologically harmless to mammals and other animals. HP‐β‐CD is electrospun from an aqueous solution by blending with a non‐toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). Aqueous solutions containing different HP‐β‐CD/PEO blends (50:50–80:20) with variable concentrations (4 wt%–12 wt%) were used. Scanning electron microscope was used to investigate the morphology of the fibers, and Fourier transform infrared spectroscopy analysis confirmed the presence of HP‐β‐CD in the fiber. Uniform nanofibers with an average diameter of 264, 244, and 236 nm were obtained from 8 wt% solution of 50:50, 60:40, and 70:30 HP‐β‐CD/PEO, respectively. The average diameter of the fiber was decreased with increasing of HP‐β‐CD/PEO ratio. However, a higher proportion of HP‐β‐CD in the spinning solution increased beads in the fibers. The polymer concentration had no significant effect on the fiber diameter. The most uniform fibers with the narrowest diameter distribution were obtained from the 8 wt% of 50:50 solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Novel Bis(β‐cyclodextrin)s Linked with Glycol and Their Inclusion Complexation with Organic Dyes

Three novel bis(β‐cyclodextrin (CD))s with flexible glycol linkers, i.e., ethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 2 ), diethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 3 ), and triethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 4 ) have been synthesized by the reaction of mono[6‐O‐(p‐toluenesulfonyl)]‐β‐CD with corresponding materials. The inclusion complexation behaviors of these compounds 2 – 4 with organic dyes; that is, acridine red (=N‐[(3Z)‐6‐(methylamino)‐3H‐xanthen‐3‐ylidene]methanaminium chloride; AR), neutral red (=N⁸,N⁸,3‐trimethylphenazine‐2,8‐diamine hydrochloride; NR), ammonium 8‐anilinonaphthalene‐1‐sulfonate (ANS), sodium 6‐(p‐toluidinyl)‐naphthalene‐2‐sulfonate (TNS), rhodamine B (RhB) and brilliant green (=N‐(4‐{[4‐(diethylamino)cyclohexa‐2,5‐dien‐1‐yl](phenyl)methyl}cyclohex‐2‐en‐1‐ylidene)‐N‐ethyl‐ethanaminium hydrogen sulfate; BG), have been investigated at 25° in phosphate buffer (pH 7.20) by ultraviolet, fluorescence, and 2D‐NMR spectroscopy. The results indicate that the two linked CD units may cooperatively bind a guest, and the molecular binding ability toward dye guests, especially bent ANS, T‐shaped RhB, and triangular BG, can be extended. This cooperative binding mode is confirmed by Job's experiments and 2D‐NMR investigations. Furthermore, the complex stability depends greatly on the linker length of these glycol‐bridged bis(β‐CD)s and the size and shape of guest. The higher binding ability and selectivity of dye molecules by bis(β‐CD)s 2 – 4 are discussed from the viewpoint of size/shape‐fit concept and multiple recognition mechanism.     

Low‐bandgap quinoxaline‐based D–A‐type copolymers: Synthesis,characterization, and photovoltaic properties

Three classes of quinoxaline (Qx)‐based donor–acceptor (D–A)‐type copolymers, poly[thiophene‐2,5‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diyl] P(T‐Qx), poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diy} P(BDT‐Qx), and poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(5′,8′‐di‐2‐thienyl‐2,3‐bis(4‐octyloxyl)phenyl)‐quinoxaline‐5,5‐diyl} P(BDT‐DTQx), were synthesized via a Stille coupling reaction. The Qx unit was functionalized at the 2‐ and 3‐positions with 4‐(octyloxy)phenyl to provide good solubility and to reduce the steric hindrance. The absorption spectra of the Qx‐containing copolymers could be tuned by incorporating three different electron‐donating moieties. Among these, P(T‐Qx) acted as an electron donor and yielded a high‐performance solar cell by assuming a rigid planar structure, confirmed by differential scanning calorimetry, UV–vis spectrophotometer, and density functional theory study. In contrast, the P(BDT‐Qx)‐based solar cell displayed a lower power conversion efficiency (PCE) with a large torsional angle (34.7°) between the BDT and Qx units. The BDT unit in the P(BDT‐DTQx) backbone acted as a linker and interfered with the formation of charge complexes or quinoidal electronic conformations in a polymer chain. The PCEs of the polymer solar cells based on these copolymers, in combination with [6,6]‐phenyl C70 butyric acid methyl ester (PC₇₁BM), were 3.3% [P(T‐Qx)], 1.9% [P(BDT‐Qx)], and 2.3% [P(BDT‐DTQx)], respectively, under AM 1.5G illumination (100 mW cm^?2). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Tuning the π‐π stacking distance and J‐aggregation of DPP‐based conjugated polymer via introducing insulating polymer

The close π–π stacking and the high J‐aggregation during the formation of fibrillar morphology in films of the poly[[2,5‐bis(2‐octyldodecyl)?2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo[3,4‐c]pyrrole‐1,4‐diyl]‐alt–[[2,2′‐(2,5‐thiophene)bis‐thieno[3,2‐b]thiophen]‐5,5′‐diyl]] (PDPPTT‐T) are demonstrated via blending with polystyrene (PS). The hydrodynamic radius (R_h) of PDPPTT‐T is decreased from 16.7 nm in the neat solution to 12.7 nm in the blend solution at the ratio of 1/20(PDPPTT‐T/PS). This phenomenon suggests that blending PS is beneficial for the disentanglement of PDPPTT‐T. The disentanglement of PDPPTT‐T facilitates the formation of fibrillar morphology. The growth of the fibrils occurs along the molecular backbones and the width of the fibrils is parallel to the π–π stacking direction. The disentanglement of PDPPTT‐T helps the molecules adjust conformation to improve J‐aggregation and decrease the π–π stacking distance. The maximum absorption is red‐shifted from 825 nm to 849 nm and the relative intensity of J‐aggregation (the 0‐0/0‐1 ratio) is increased from 1.19 to 1.60. The π–π stacking distance decreases from 3.57 to 3.52 Å. The charge‐carrier mobility will be improved in the fibrillar morphology with close π–π stacking and high J‐aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 838–847     

β‐Cyclodextrin‐Functionalized Gold Nanoparticles/Poly(L‐cysteine) Modified Glassy Carbon Electrode for Sensitive Determination of Metronidazole

A simple electrochemical method was developed to determine metronidazole based on β‐cyclodextrin‐functionalized gold nanoparticles/poly(L ‐cysteine) modified glassy carbon electrode (β‐CD‐GNPs/poly(L ‐cys)/GCE). The electropolymerized film of poly(L ‐cys) provides a stable matrix for the fabrication of a sensing interface. β‐CD‐GNPs can form inclusion complexes with metronidazole and act as a modifier with catalytic function. The modified electrode exhibited excellent electrocatalytic activity towards metronidazole. The reaction of metronidazole at the modified electrode was an irreversible process controlled by diffusion. Under optimum experimental conditions, the logarithm of catalytic currents shows a good linear relationship with that of the metronidazole concentration in the range of 0.1–600 µmol/L with a low detection limit of 14 nmol/L. In addition, the modified electrode exhibited satisfactory stability, sensitivity and reproducibility, and could be applied to the determination of metronidazole in an injection solution.