Summary: The synthesis of aqueous dispersions of hybrid acrylic copolymer particles with either a monofunctional or a multifunctional polyhedral oligomeric silsesquioxane methacrylate comonomer has been performed by free radical heterophase polymerization. The miniemulsion process gives stable latexes, whereas the less controlled emulsion route results in colloidal instability of the products. The thermal and mechanical properties of the nanocomposite latex films have been preliminarily investigated.
The nanocomposite latex particles based on hybrid copolyacrylates with highly dispersed POSS cages. 相似文献
High‐solid‐content low‐viscosity bimodal latexes with very small particles (<200 nm) are obtained using two emulsion polymerization approaches. In the first approach, the PSD is controlled by using highly crosslinked nanolatex particles (<30 nm) as seeds for the small mode to minimize their growth during the growth of the large mode. These particles are shown to grow at a volumetric rate that is 25 times lower than the larger particles. Latexes with 57 wt% solids content and viscosities <1400 mPa · s at 20 s?1 are produced. The second approach is based on the re‐nucleation of the small particles by addition of a shot of surfactant in the presence of large particles to produce bimodal latexes. Latexes with 60 wt% solid content with viscosity of 490 mPa · s at 20 s?1 are produced using this approach.
We demonstrate the functioning of a macromolecular nanoreactor which guides a reaction in a confined volume and leads toward improved functional properties of a product material. In our approach, the polymerization of aniline (ANi) is conducted within the interfacial volume of spherical polyelectrolyte brushes (SPB) which are densely affixed to colloidal particles. The SPB provide optimal conditions for matrix polymerization by the efficient confinement of ANi monomers within the finite volume of polyelectrolyte brushes and controlled delivery of the oxidizing reagent to the reaction volume. The excellent kinetic stability of the resulting core–shell particles together with the high macroscopic conductivity of the respective composite open up perspectives for novel materials (a conductive ink).
Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.
A new route to synthesize amphiphilic core–shell particles that consist of well‐defined hydrophobic polymer cores and poly(vinylamine) (PVAm) shells has been developed. The PVAm was treated with a small amount of tert‐butyl hydroperoxide to generate free radicals that subsequently initiated both graft‐ and homo‐polymerization of vinyl monomer such as n‐butyl acrylate, methyl methacrylate, and styrene. Stable particles in the range from 100 to 250 nm in diameter with very narrow size distributions (polydispersity index between 1.08 and 1.15) were produced in high yields. TEM images of the particles revealed that they had well‐defined core–shell nanostructures with thick and hairy PVAm shells. The structures of the vinyl monomer and water‐soluble polymer were found to strongly influence the formation of particles and their sizes.
This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.
The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.
A new series of azobenzene‐containing polyfluorenes have been successfully prepared through polymer reactions by the utilization of “click” chemistry. All the polymers were well characterized and soluble in common solvents. By the application of the concept of “suitable isolation group”, the macroscopic nonlinear optical (NLO) properties of the polymers could be boosted to as large as three times that of the polymer without isolation moieties. Also, all the polymers were thermally stable, and demonstrated good procesability, coupled with improved optical transparency. Thus, they are good candidates for the practical applications as new photonic materials.
Summary: A series of novel mesogen‐jacketed liquid crystal miktoarm star rod‐coil block copolymers were synthesized via atom transfer radical polymerization (ATRP). Their architectures {coil conformation of styrene segment and rigid rod conformation of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) segment} were confirmed by GPC, 1H NMR, and MALDI‐TOF studies. The liquid crystalline behaviors of the synthesized copolymers are evidenced from POM observation. The liquid crystalline phase depends on the molecular weights of the rigid rod arm of miktoarm star copolymers.
Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.
MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix. 相似文献
Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.
Four linear and four star equimolar terpolymers based on non‐ionic hydrophilic methoxy hexa(ethylene glycol) methacrylate, ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate and neutral hydrophobic methyl methacrylate were synthesized using group transfer polymerization and investigated in aqueous dilute solutions. It was found that the (ABC)n multi‐arm star terpolymers formed unimolecular micelles comprising three centrosymmetric compartments. The position of each compartment could be determined by the block sequence (ABC, ACB or BAC) at will. On the other hand, the ABC linear counterparts formed loose associates with very low aggregation numbers. It was shown that the polymer architecture (linear versus star) greatly affected the micellization phenomena of the terpolymers in selective media.
Summary: 2,2,6,6‐Tetramethylpiperidinyl‐1‐oxy (TEMPO)‐mediated radical polymerization of styrene in aqueous miniemulsion at 125 °C using sodium dodecylbenzenesulfonate and poly(vinyl alcohol), respectively, as colloidal stabilizers has been investigated. The particle size had a dramatic effect on the polymerization process. Decreasing particle size led to a markedly higher polymerization rate, but less control and a lower degree of livingness. For particles with diameters greater than approximately 170 nm, the polymerization behavior was essentially the same as in the corresponding bulk system. By varying the particle size within an appropriate range, it is possible to tune the polymerization such that the polymerization rate is increased while still maintaining reasonable control and livingness.
RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.
The synthesis of branched macromolecules from renewable resources via olefin metathesis is described. We observed that it is possible to control the molecular weight during the acyclic triene metathesis (ATMET) of a triglyceride by the application of methyl acrylate as a chain stopper for this straightforward one step one pot polymerization. The resulting branched materials were characterized by GPC, NMR as well as ESI‐MS and the combination of these techniques provided valuable insights into the polymer structure as well as occurring side reactions during this olefin metathesis polymerization reaction.
Summary: RAFT is applied to the dendronized macromonomers of the first and second generation, 1 and 2 , respectively. Good results are obtained in the presence of AIBN as radical initiator, with compound 6 as mediator and at mediator to monomer ratios of 2:200 for monomer 1 ( = 320 000, PDI = 1.24) and monomer 2 ( = 178 000, PDI = 1.20). The common characteristics of a controlled polymerization are reasonably met. The more sterically demanding G2 monomer 2 requires higher polymerization temperatures.
A novel method of thermo‐controlled emulsion polymerization has been employed to synthesize spherical polyelectrolyte brushes that consist of a solid polystyrene core and a poly (acrylic acid) (PAA) shell covalently attached on the core surface densely by one end. The growth of brushes from the core surface was monitored by dynamic light scattering (DLS). The particle size of PS core latex showed a narrow size distribution when observed by scanning electron microscopy (SEM). The brush size changed significantly upon changing pH value and ionic strength, and displayed similar behavior to brushes prepared by photo‐emulsion polymerization. The grafting density of the PAA brush, which was determined by cutting off the PAA chains using alkali hydrolysis, confirmed the formation of PAA brushes.
Simulations of polymerization rate, molecular weight development and evolution of the concentrations of species participating in the reaction mechanism over a range of operating conditions, and a parameter sensitivity analysis showing the effects of temperature, activation/deactivation equilibrium constant and initial concentrations of controller and initiator (if present) on these variables are presented for the nitroxide‐mediated radical polymerization of styrene. The simulations were performed with a computer program based on a detailed reaction mechanism. The simulated profiles of conversion, number average molecular weight ( ), and polydispersity agree well with experimental data. Previously unknown activation energies for reactions involved in the mechanism are estimated. The temperature dependence of the kinetic rate constants obtained in this study will be useful for future modeling and optimization studies.
