Living Free Radical Polymerization of Cyclodextrin Host‐Guest Complexes of Styrene via the Reversible Addition Fragmentation Chain Transfer (RAFT) Process in Aqueous Solution

Summary: Host‐guest complexes of styrene and randomly methylated β‐cyclodextrin (m‐β‐CD) were polymerized in aqueous medium via the reversible addition fragmentation chain transfer (RAFT) process. 3‐Benzylsulfanylthiocarbonylsulfanylpropionic acid (TTC) was used as trithiocarbonate‐type RAFT agent. The results indicate a controlled character of the polymerization of the styrene complexes as the number‐average molecular weight, , increases linearly with monomer to polymer conversion; however, the molecular weights of the obtained polystyrenes deviate to higher values than those theoretically predicted. Nevertheless, the molecular weights can be controlled by variation of the initial RAFT agent concentration. The polystyrenes produced in this system exhibited narrower polydispersities (1.23 < < 2.36) than those produced without RAFT agent (5.24 < < 9.21) under similar conditions. The present contribution represents the first example of RAFT polymerization of a m‐β‐CD‐complexed hydrophobic vinylmonomer (styrene) from homogenous aqueous solution.

Schematic presentation of complexation and RAFT polymerization of m‐β‐CD‐complexed styrene with TTC as RAFT agent and evolution of the full molecular weight distributions in the CD‐mediated styrene free radical RAFT polymerization.     

Cyclodextrins in polymer synthesis: polymerization of methyl methacrylate under atom‐transfer conditions (ATRP) in aqueous solution

Host guest complexes of methyl methacrylate (MMA) and randomly methylated β‐cyclodextrin (m‐β‐CD, 1 a ) were polymerized in aqueous medium using atom‐transfer radical polymerization. Ethyl 2‐bromoisobutyrate (EBIB) was used as an initiator, copper(I) bromide as the catalyst, and bipyridine (bipy) or 4,4′‐di‐(5‐nonyl)‐2,2´‐bipyridine (dNbipy) as ligands. The unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA). It was found that using dNbipy resulted in higher monomer conversion than using bipy as the ligand under similar conditions. Furthermore, it is shown that the polymerization of MMA under these conditions has a living character. The polymers obtained have a much lower polydispersity than those obtained from conventional free‐radical polymerization. Also, the block copolymerization of PMMA bearing a bromoester end group with CD‐complexed styrene ( 2 a ) was carried out under ATRP conditions in aqueous medium.     

Living radical copolymerization of styrene/maleic anhydride

Styrene/maleic anhydride (MA) copolymerization was carried out using benzoyl peroxide (BPO) and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO). Styrene/MA copolymerization proceeded faster and yielded higher molecular weight products compared to styrene homopolymerization. When styrene/MA copolymerization was approximated to follow the first‐order kinetics, the apparent activation energy appeared to be lower than that corresponding to styrene homopolymerization. Molecular weight of products from isothermal copolymerization of styrene/MA increased linearly with the conversion. However products from the copolymerization at different temperatures had molecular weight deviating from the linear relationship indicating that the copolymerization did not follow the perfect living polymerization characteristics. During the copolymerization, MA was preferentially consumed by styrene/MA random copolymerization and then polymerization of practically pure styrene continued to produce copolymers with styrene‐co‐MA block and styrene‐rich block. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2239–2244, 2000     

Cyclodextrins in polymer synthesis: free radical polymerization of cyclodextrin host‐guest complexes of methyl methacrylate or styrene from homogenous aqueous solution

The polymerization of methylated β‐cyclodextrin (m‐β‐CD) 1 : 1 host‐guest compounds of methyl methacrylate (MMA) ( 1 ) or styrene ( 2 ) is described. The polymerization of complexes 1 a and 2 a was carried out in water with potassium peroxodisulfate (K₂S₂O₈)/sodium hydrogensulfite (NaHSO₃) as radical redox initiator at 60°C. Unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA) ( 3 ) and polystyrene ( 4 ). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in ethanol as organic solvent with 2,2′‐azoisobutyronitrile (AIBN) as radical initiator showed significantly lower molecular weights and were obtained in lower yields in all cases. Polymerization of m‐β‐CD complexed MMA in water, initiated with 2,2′‐azobis(N,N ′‐dimethyleneisobutyroamidine) dihydrochloride, occurred much faster than the polymerization of uncomplexed MMA in methanol under similar conditions. Furthermore, it was shown, that the precipitation polymerization of complexed MMA from homogeneous aqueous solution can be described by equations (P_n^–1 ∝ lsqb;Irsqb;^0.5) similar to those for classical polymerization in solution.     

Isomeric effect of the Et(H4Ind)2Zr(CH3)2 catalyst on the copolymerization of ethylene and styrene: A computational study

A density functional theory (B3LYP) computational study of the ethylene–styrene copolymerization process using meso‐Et(H₄Ind)₂Zr(CH₃)₂ as the catalyst is presented. The monomer insertion barriers in meso species are evaluated and compared with previously obtained barriers in rac diastereoisomers. Differences related to ethylene homopolymerization and ethylene–styrene copolymerization activities as well as styrene incorporation into the copolymer are found between the meso and rac diastereoisomers. Nevertheless, a migratory insertion mechanism seems to hold for both diastereoisomeric species. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4752–4761, 2006     

Microwave‐Assisted Free Radical Polymerizations and Copolymerizations of Styrene and Methyl Methacrylate

Summary: Radical homopolymerizations and copolymerizations of styrene were performed in toluene and N,N‐dimethylformamide (DMF) as solvents using different initiators with and without microwave irradiation. Only the homopolymerization of styrene under microwave irradiation in DMF with DtBP showed significantly enhanced styrene conversion whereas other initiators resulted in no or only slight increase of styrene conversion under microwave irradiation. In any case, DMF was required to gain in styrene conversion under microwave irradiation. Significantly higher monomer conversions were observed under otherwise comparable conditions in the copolymerization of styrene and methyl methacrylate (MMA) in DMF. Microwave‐induced selectivity of monomers was not observed in copolymerizations.

Yield of styrene polymerizations under varying reaction conditions initiated by DtBP.     

Alternating copolymerizations of styrene and acrylic monomers initiated with carbanions in the presence of ZnCl2

On electrochemical initiation of alternating copolymerizations of styrene–acrylonitrile (AN) and styrene–diethyl fumarate (DEF) in the presence of ZnCl₂, radical anions of AN–ZnCl₂ and DEF–ZnCl₂ complexes produced at the cathode were assumed to initiate copolymerization. In analogy with the cathode-initiated copolymerization, the radical anions of AN–ZnCl₂ and DEF–ZnCl₂, generated with the carbanions such as sodium naphthalene, disodium α-methylstyrene tetramer dianion, and butyllithium, were also found to produce alternating copolymers of styrene–AN and styrene–DEF. On the contrary, no polymers were obtained from methyl methacrylate (MMA)–styrene and methacrylonitrile (MAN)–styrene in the presence of ZnCl₂ either with carbanions or by electrochemical reduction. Styrene–MAN–ZnCl₂ yielded an alternating copolymer with carbanions upon introduction of oxygen.     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004     

Complexed copolymerization of vinyl compounds with alkylaluminum halides

The monomer reactivity in the complexed copolymerization of vinyl compounds with alkylaluminum halides has been extensively surveyed. Equimolar copolymers were obtained in various combinations of monomers which are classified into two monomer groups, A and B. The group B monomers are conjugated vinyl compounds having nitrile or carbonyl groups in the conjugated position and form complexes with alkylaluminum halides. The group A monomers are donor monomers having low values, such as olefins, haloolefins, dienes, and unsaturated esters. These A monomers belong to the same group of monomers which give alternating copolymers in conventional radical copolymerization with maleic anhydride, SO₂, and so on. In addition the complexed copolymerization has the same specific characteristics as the conventional alternating copolymerization, i.e., high reactivities of allyl-resonance monomers and inner olefins and no transfer of halogen atom to the copolymers in CCl₄. These features suggest little or no participation of the A monomer radical. The Q-e scheme is also discussed in terms of the monomer reactivity. More than two monomers selected from groups A and B give multicomponent copolymers in which alternating sequential structures hold with respect to A and B. Anomalous mutual reactivities between two B monomers in the terpolymerization were observed and indicate that the nature of radical in the complexed copolymerization may be different from that expected by the Lewis-Mayo equation. The complexed radical mechanism previously proposed is discussed in connection with the specific behavior mentioned above.     

Synthesis and properties of cyclopropane-containing optically transparent polymers

New cyclopropane-containing optically transparent polymers were prepared by radical homopolymerization of p-(2-methoxycarbonylcyclopropyl)styrene and by its binary copolymerization with styrene and methyl methacrylate. The composition and structure of these macromolecular compounds were determined, and their main service characteristics were evaluated.     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Studies of the polymerization of diallyl compounds. XXXVII. Copolymerizations of diallyl phthalate with dialkyl fumarates

Diallyl phthalate (DAP) was copolymerized with dialkyl fumarates, including diethyl fumarate (DEF), di-n-butyl fumarate (DBF), and di-n-octyl fumarate (DOF) by using 2,2′-azobisisobutyronitrile as an initiator at 60°C. Both rate and degree of copolymerization were quite enhanced compared with the homopolymerization of DAP and the maximum rate was found at the molar ratio of 1:1 in the monomer feed. The cyclization of DAP was almost exclusively suppressed in the Copolymerization. Gelation was promoted from 25% of the gel-point conversion for the DAP homopolymerization to 9% of the minimum one observed. Copolymerizability of DAP (M₁) with dialkyl fumarates (M₂) was quite high, with the following monomer reactivity ratios M₂, r₁, r₂: DEF, 0.01, 1.25; DBF, 0.02, 1.01; DOF, 0.02, 0.96. These results are discussed in mechanistic detail.     

Cyclodextrins in Polymer Synthesis: Enantiodiscrimination in Free‐Radical Polymerization of Cyclodextrin‐Complexed Racemic N‐Methacryloyl‐D,L‐phenylalanine Methyl Ester

The enantiodiscriminating polymerization of racemic cyclodextrin‐complexed N‐methacryloyl‐phenylalanine methyl ester is investigated. ¹H NMR spectra of the complexes with methylated β‐cyclodextrin in D₂O manifest splittings due to chiral recognition. The different stabilities of the diastereomeric complexes influence the kinetics of the homopolymerization, particularly at 0 °C. An enrichment of the residual N‐methacryloyl‐L ‐phenylalanine methyl ester of 14 % was achieved after 21 h of polymerization.     

Cyclodextrins in Polymer Synthesis: Free Radical Polymerization of a tert-Butylmethacrylate-Cyclodextrin Host–Guest System in Aqueous Medium

The homopolymerization of methylated-β-cyclodextrin (me-β-CD) host–guest compound of tert-butyl methacrylate (1a) is described. We investigated the free radical polymerization of the complexed monomer (1a) and of the free monomer (1) at ambient and high temperature. Poly(tert-butylmethacrylate) synthesized via the cyclodextrin mediated method exhibited number-average molecular weights ranging from 12,000–60,000 g/mol with polydispersities from 1.9–3.1. The polymerizations without cyclodextrin show significantly lower yields in comparison with the cyclodextrin mediated polymerizations. Here, the polymer obtained is colloidal dispersed. At ambient temperature (20°C) no polymerization occurs in the absence of cyclodextrin, whereas, under the same conditions, the homopolymerization of the complexed monomer (1a) leads to polymerization with yields around 75%.     

Titanium(IV) nonmetallocene complex catalyzed aqueous homopolymerization and copolymerization of styrene and methyl methacrylate: An Environmentally friendly approach to ultrahigh molecular weight polymer nanoparticles

A new titanium(IV) complex bearing [ONO] type ligand has been synthesized, characterized, and employed as catalyst in homopolymerization and copolymerization of styrene and methyl methacrylate. In the presence of sodium tetraphenyl borate and sodium n‐dodecyl sulfate (SDS), it exhibits moderate to high activity and afford ultrahigh molecular weight polymers. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cyclodextrins in Polymer Synthesis: Crosslinking Water‐Soluble Unsaturated Polyester Resins Using a Cyclodextrin/Styrene Complex in Aqueous Medium

A new method was developed to crosslink water‐soluble unsaturated polyester resins prepared from maleic anhydride and poly(ethylene glycol) in water as the solvent. Crosslinking was carried out with various molar ratios of the host‐guest complex consisting of styrene as the guest and methylated β‐cyclodextrin as the host. Polymerizations were performed in water with K₂S₂O₈/Na₂S₂O₅ as free radical initiator at 25 °C. Thermal properties of the networks obtained depend on the amount of styrene incorporated into the polymer.

Acceleration effect of me‐β‐CD during crosslinking of an unsaturated polyester with styrene in water: (a) monomer complexed with me‐β‐CD, and (b) with uncomplexed monomer.     

Synthesis,polymerization, and copolymerization of lactam-substituted styrenes

Four new substituted styrene derivatives carrying lactam rings (2-pyrrolidone or 2-piperidone) in para position have been synthesized, namely 4-(2-oxo-3-methylene-pyrrolidinyl)styrene, 4-(2-oxo-3-methylene-piperidinyl)styrene, 4-(p-styryl)-2-pyrrolidone, and 4-(p-styryl)-2-piperidone. Their homopolymerization and copolymerization with styrene, methyl methacrylate, and acrylic acid have been considered. By ring opening of the side lactam groups, the homopolymers are transformed into the corresponding poly aminocarboxylic acids.     

Kinetics and mechanism of metallocene‐catalyzed olefin polymerization: Comparison of ethylene,propylene homopolymerizations,and their copolymerization

A series of ethylene, propylene homopolymerizations, and ethylene/propylene copolymerization catalyzed with rac‐Et(Ind)₂ZrCl₂/modified methylaluminoxane (MMAO) were conducted under the same conditions for different duration ranging from 2.5 to 30 min, and quenched with 2‐thiophenecarbonyl chloride to label a 2‐thiophenecarbonyl on each propagation chain end. The change of active center ratio ([C^*]/[Zr]) with polymerization time in each polymerization system was determined. Changes of polymerization rate, molecular weight, isotacticity (for propylene homopolymerization) and copolymer composition with time were also studied. [C^*]/[Zr] strongly depended on type of monomer, with the propylene homopolymerization system presented much lower [C^*]/[Zr] (ca. 25%) than the ethylene homopolymerization and ethylene–propylene copolymerization systems. In the copolymerization system, [C^*]/[Zr] increased continuously in the reaction process until a maximum value of 98.7% was reached, which was much higher than the maximum [C^*]/[Zr] of ethylene homopolymerization (ca. 70%). The chain propagation rate constant (k_p) of propylene polymerization is very close to that of ethylene polymerization, but the propylene insertion rate constant is much smaller than the ethylene insertion rate constant in the copolymerization system, meaning that the active centers in the homopolymerization system are different from those in the copolymerization system. Ethylene insertion rate constant in the copolymerization system was much higher than that in the ethylene homopolymerization in the first 10 min of reaction. A mechanistic model was proposed to explain the observed activation of ethylene polymerization by propylene addition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 867–875     

A DFT investigation of the mechanism for alternating copolymerization of styrene with carbon monoxide catalyzed by Pd(II) complexes

Density functional theory has been employed to study the homogeneous catalytic copolymerization of styrene with carbon monoxide.The copolymerization reaction is catalyzed by Pd（Ⅱ） coordinated with 2,2’-bipyridine,a conventional nitrogen-containing bidentate ligand with achiral C_2vsymmetry.The chain propagation mechanism for the alternating copolymerization as well as the side reactions,including multiple insertions of CO and homopolymerization of styrene,has been investigated.This study focused exclusively on regioisomerism and stereoisomerism.We have demonstrated that the strictly alternating copolymerization is kinetically and thermodynamically favored over the side reactions（i.e.,multiple insertions of CO and homopolymerization of styrene）.The regiochemistry study indicates the 2,1 type.Furthermore,the stereochemistry study shows that the syndiotactic conformation is preferred over the isotactic or atactic conformations.