Phytochemicals Mediated Synthesis of AuNPs from Citrullus colocynthis and Their Characterization

Engineered nanoparticles that have distinctive targeted characteristics with high potency are modernistic technological innovations. In the modern era of research, nanotechnology has assumed critical importance due to its vast applications in all fields of science. Biologically synthesized nanoparticles using plants are an alternative to conventional methods. In the present study, Citrullus colocynthis (bitter apple) was used for the synthesis of gold nanoparticles (AuNPs). UV-Vis’s spectroscopy, XRD, SEM and FTIR were performed to confirm the formation of AuNPs. UV-Vis’s spectra showed a characteristic peak at the range of 531.5–541.5 nm. XRD peaks at 2 θ = 38°, 44°, 64° and 77°, corresponding to 111, 200, 220 and 311 planes, confirmed the crystalline nature of AuNPs. Spherical AuNPs ranged mostly between 7 and 33 nm, and were measured using SEM. The FTIR analysis confirmed the presence of phytochemicals on the surface of AuNPs. Successful synthesis of AuNPs by seed extract of Citrullus colocynthis (bitter apple) as a capping and reducing agent represents the novelty of the present study.     

Rapid synthesis of stable and functional conjugates of DNA/gold nanoparticles mediated by Tween 80

Gold nanoparticles conjugated with DNA represent an attractive and alternative platform for broad applications in biosensors, medical diagnostic, and biological analysis. However, current methods to conjugate DNA to gold nanoparticles are time-consuming. In this study, we report a novel approach to rapidly conjugate DNA to gold nanoparticles (AuNPs) to form functional DNA/AuNPs in 2-3 h using Tween 80 as protective agent. With a fluorescence-based technique, we determine that the DNA density on the surface of AuNPs achieves about ～60 strands per particles, which is comparable to the loading density in the current methods. Moreover, the DNA/AuNPs synthesized by our approach exhibit an excellent stability as a function of temperature, pH, and freeze-thaw cycle, and the functionality of DNA/AuNPs conjugates is also verified. The work presented here has important implications to develop the fast and reproducible synthesis of stable DNA-functionalized gold nanoparticles.     

Green Synthesis of Gold Nanoparticles Using Plant Extracts as Beneficial Prospect for Cancer Theranostics

Gold nanoparticles (AuNPs) have been widely explored and are well-known for their medical applications. Chemical and physical synthesis methods are a way to make AuNPs. In any case, the hunt for other more ecologically friendly and cost-effective large-scale technologies, such as environmentally friendly biological processes known as green synthesis, has been gaining interest by worldwide researchers. The international focus on green nanotechnology research has resulted in various nanomaterials being used in environmentally and physiologically acceptable applications. Several advantages over conventional physical and chemical synthesis (simple, one-step approach to synthesize, cost-effectiveness, energy efficiency, and biocompatibility) have drawn scientists’ attention to exploring the green synthesis of AuNPs by exploiting plants’ secondary metabolites. Biogenic approaches, mainly the plant-based synthesis of metal nanoparticles, have been chosen as the ideal strategy due to their environmental and in vivo safety, as well as their ease of synthesis. In this review, we reviewed the use of green synthesized AuNPs in the treatment of cancer by utilizing phytochemicals found in plant extracts. This article reviews plant-based methods for producing AuNPs, characterization methods of synthesized AuNPs, and discusses their physiochemical properties. This study also discusses recent breakthroughs and achievements in using green synthesized AuNPs in cancer treatment and different mechanisms of action, such as reactive oxygen species (ROS), mediated mitochondrial dysfunction and caspase activation, leading to apoptosis, etc., for their anticancer and cytotoxic effects. Understanding the mechanisms underlying AuNPs therapeutic efficacy will aid in developing personalized medicines and treatments for cancer as a potential cancer therapeutic strategy.     

Revisiting catechol derivatives as robust chromogenic hydrogen donors working in alkaline media for peroxidase mimetics

Colloidal noble metal-based nanoparticles are able to catalyze oxidation of chromogenic substrates by H₂O_2, similarly to peroxidases, even in basic media. However, lack of robust chromogens, which work in high pH impedes their real applications. Herein we demonstrate the applicability of selected catechol derivatives: bromopyrogallol red (BPR) and pyrogallol (PG) as chromogenic substrates for peroxidase-like activity assays, which are capable of working over wide range of pH, covering also basic values. Hyperbranched polyglycidol-stabilized gold nanoparticles (HBPG@AuNPs) were used as model enzyme mimetics. Efficiency of several methods of improving stability of substrates in alkaline media by means of selective suppression of their autoxidation by molecular oxygen was evaluated. In a framework of presented studies the impact of borate anion, applied as complexing agent for PG and BPR, on their stability and reactivity towards oxidation mediated by catalytic AuNPs was investigated. The key role of high concentration of hydrogen peroxide in elimination of non-catalytic oxidation of PG and improvement of optical properties of BPR in alkaline media containing borate was underlined. Described methods of peroxidase-like activity characterization with the use of BPR and PG can become universal tools for characterization of nanozymes, which gain various applications, among others, they are used as catalytic labels in bioassays and biosensors.     

On the Synergism of Biogenic Gold Nanoparticles and Hydroxyaluminum Phthalocyanines in the Photoeradication of Staphylococcus aureus

Due to the unusual properties of gold nanoparticles, these structures are widely used in medicine and biology. This paper describes for the first time the synthesis of colloidal gold nanoparticles by the cell-free filtrate obtained from the Coriolus versicolor biomass and the use of these biogenic nanostructures to increase the photosensitizing efficiency of di- (AlPcS₂) and tetrasulfonated (AlPcS₄) hydroxyaluminum phthalocyanines in antibacterial photodynamic therapy. The obtained monodisperse particles were extremely stable, and this remarkable stability was due to the presence of phosphoprotein as a capping agent. The studied gold nanoparticles had a spherical shape, were uniformly distributed, and were characterized by a single plasmon band at wavelength of 514–517 nm. Almost 60% of the gold particles were found to be in the range of 13 to 15 nm. In accordance with the regulations of the American Microbiological Society, indicating that any antimicrobial technique must kill at least 3 log CFU (99.9%) to be accepted as “antimicrobial”, this mortality of Staphylococcus aureus was shown to be achieved in the presence of AlPcS₄ + AuNPs mixture and 4.8 J cm⁻² light dose compared to AlPcS₄ alone, which required a light dose of 24 J cm⁻². The best effect of increasing the effectiveness of combating this pathogen was observed in the case of AlPcS₂ + AuNPs as a photosensitizing mixture. The light dose of 24 J cm⁻² caused a lethal effect of the studied coccus in the planktonic culture.     

A Review on Gold Nanotriangles: Synthesis,Self-Assembly and Their Applications

Gold nanoparticles (AuNPs) with interesting optical properties have attracted much attention in recent years. The synthesis and plasmonic properties of AuNPs with a controllable size and shape have been extensively investigated. Among these AuNPs, gold nanotriangles (AuNTs) exhibited unique optical and plasmonic properties due to their special triangular anisotropy. Indeed, AuNTs showed promising applications in optoelectronics, optical sensing, imaging and other fields. However, only few reviews about these applications have been reported. Herein, we comprehensively reviewed the synthesis and self-assembly of AuNTs and their applications in recent years. The preparation protocols of AuNTs are mainly categorized into chemical synthesis, biosynthesis and physical-stimulus-induced synthesis. The comparison between the advantages and disadvantages of various synthetic strategies are discussed. Furthermore, the specific surface modification of AuNTs and their self-assembly into different dimensional nano- or microstructures by various interparticle interactions are introduced. Based on the unique physical properties of AuNTs and their assemblies, the applications towards chemical biology and sensing were developed. Finally, the future development of AuNTs is prospected.     

Microbial synthesis of gold nanoparticles: Current status and future prospects

Gold nanoparticles have been employed in biomedicine since the last decade because of their unique optical, electrical and photothermal properties. Present review discusses the microbial synthesis, properties and biomedical applications of gold nanoparticles. Different microbial synthesis strategies used so far for obtaining better yield and stability have been described. It also includes different methods used for the characterization and analysis of gold nanoparticles, viz. UV–visible spectroscopy, Fourier transform infrared spectroscopy, X ray diffraction spectroscopy, scanning electron microscopy, ransmission electron microscopy, atomic force microscopy, electron dispersive X ray, X ray photoelectron spectroscopy and cyclic voltametry. The different mechanisms involved in microbial synthesis of gold nanoparticles have been discussed. The information related to applications of microbially synthesized gold nanoparticles and patents on microbial synthesis of gold nanoparticles has been summarized.     

Plasmonic Gold Nanoparticles (AuNPs): Properties,Synthesis and their Advanced Energy,Environmental and Biomedical Applications

Inducing plasmonic characteristics, primarily localized surface plasmon resonance (LSPR), in conventional AuNPs through particle size and shape control could lead to a significant enhancement in electrical, electrochemical, and optical properties. Synthetic protocols and versatile fabrication methods play pivotal roles to produced plasmonic gold nanoparticles (AuNPs), which can be employed in multipurpose energy, environmental and biomedical applications. The main focus of this review is to provide a comprehensive and tutorial overview of various synthetic methods to design highly plasmonic AuNPs, along with a brief essay to understand the experimental procedure for each technique. The latter part of the review is dedicated to the most advanced and recent solar-induced energy, environmental and biomedical applications. The synthesis methods are compared to identify the best possible synthetic route, which can be adopted while employing plasmonic AuNPs for a specific application. The tutorial nature of the review would be helpful not only for expert researchers but also for novices in the field of nanomaterial synthesis and utilization of plasmonic nanomaterials in various industries and technologies.     

Synthesis and electrochemical applications of gold nanoparticles

This review covers recent advances in synthesis and electrochemical applications of gold nanoparticles (AuNPs). Described approaches include the synthesis of AuNPs via designing and choosing new protecting ligands; and applications in electrochemistry of AuNPs including AuNPs-based bioelectrochemical sensors, such as direct electrochemistry of redox-proteins, genosensors and immunosensors, and AuNPs as enhancing platform for electrocatalysis and electrochemical sensors.     

Growth kinetic study of ionic liquid mediated synthesis of gold nanoparticles using Elaeis guineensis (oil palm) kernels extract under microwave irradiation

Gold nanoparticles (AuNPs) are the most studied nanomaterials due to their promising applications. However, surface capping of AuNPs is essential to protect aggregation for enhanced colloidal stability. In this study, a single step method was established to synthesize stable AuNPs using oil palm kernel (OPK) extract prepared in IL[EMIM][OAc] (1-ethyl-3-methylimidazolium acetate). Ionic liquids were used for phytochemicals extraction along with capping and stabilizing of AuNPs after their synthesis. The OPK extract reduced the gold precursor, and UV–vis spectroscopy revealed a sharp surface plasmon (SPR) peaks in the region of 524–529 nm, which confirmed the formation of AuNPs. UV–vis and TEM analysis indicated that microwave assisted synthesis was rapid to synthesize well dispersed and small sized AuNPs in comparison with conventional heating. FTIR analysis of kernels extract before and after its reaction with gold precursor identified the involvement of CH aromatic groups, polyphenolic OH groups, and carbonyl amide groups that are responsible for reduction of trivalent gold ions to AuNPs. EDAX and XPS analysis were performed to identify the elemental gold and its surface interaction with ILs and other organic moieties. Colloidal AuNPs kept at room temperature for periods of six months were remained stable. The change of pristine nanostructure arises due to involvement of different driving forces during growth of nanoparticles. Thermodynamically instability of nanomaterials may leads to Ostwald Repining (OR) or adopt complex pattern of growth and undergo coalesce and orientation attachment (OA). These models were fitted to compare the theoretically growth of particles along with actual increase of particles size. Experimental results suggested that OA growth was originated in early phase, however, it substituted and mainly controlled by OR growth pattern over time.     

Interfacial Characterization of Polypyrrole/AuNP Composites towards Electrocatalysis of Ascorbic Acid Oxidation

Polypyrrole (PPy) is an interesting conducting polymer due to its good environmental stability, high conductivity, and biocompatibility. The association between PPy and metallic nanoparticles has been widely studied since it enhances electrochemical properties. In this context, gold ions are reduced to gold nanoparticles (AuNPs) directly on the polymer surface as PPy can be oxidized to an overoxidized state. This work proposes the PPy electrochemical synthesis followed by the direct reduction of gold on its surface in a fast reaction. The modified electrodes were characterized by electronic microscopic and infrared spectroscopy. The effect of reduction time on the electrochemical properties was evaluated by the electrocatalytic properties of the obtained material from the oxidation of ascorbic acid (AA) and electrochemical impedance spectroscopy studies. The presence of AuNPs improved the AA electrocatalysis by reducing oxidation potential and lowering charge transfer resistance. EIS data were fitted using a transmission line model. The results indicated an increase in the electronic transport of the polymeric film in the presence of AuNPs. However, PPy overoxidation occurs when the AuNPs’ deposition is higher than 30 s. In PPy/AuNPs 15 s, smaller and less agglomerated particles were formed with fewer PPy overoxidized, confirming the observed electrocatalytic behavior.     

Electrochemistry of Tetrathiafulvalene Ligands Assembled on the Surface of Gold Nanoparticles

The synthesis of a tetrathiafulvalene (TTF) derivative, S-[4-({4-[(2,2′-bi-1,3-dithiol-4-ylmethoxy)methyl] phenyl}ethynyl)phenyl] ethanethioate, suitable for the modification of gold nanoparticles (AuNPs), is described in this article. The TTF ligand was self-assembled on the AuNP surface through ligand exchange, starting from dodecanethiol-stabilized AuNPs. The resulting modified AuNPs were characterized by TEM, UV-Vis spectroscopy, and electrochemistry. The most suitable electrochemical method was the phase-sensitive AC voltammetry at very low frequencies of the sine-wave perturbation. The results indicate a diminishing electronic communication between the two equivalent redox centers of TTF and also intermolecular donor–acceptor interactions manifested by an additional oxidation wave upon attachment of the ligand to AuNPs.     

Self-assembled gel tubes,filaments and 3D-printing with in situ metal nanoparticle formation and enhanced stem cell growth

This paper reports simple strategies to fabricate self-assembled artificial tubular and filamentous systems from a low molecular weight gelator (LMWG). In the first strategy, tubular ‘core–shell’ gel structures based on the dibenzylidenesorbitol-based LMWG DBS-CONHNH₂ were made in combination with the polymer gelator (PG) calcium alginate. In the second approach, gel filaments based on DBS-CONHNH₂ alone were prepared by wet spinning at elevated concentrations using a ‘solvent-switch’ approach. The higher concentrations used in wet-spinning prevent the need for a supporting PG. Furthermore, this can be extended into a 3D-printing method, with the printed LMWG objects showing excellent stability for at least a week in water. The LMWG retains its unique ability for in situ precious metal reduction, yielding Au nanoparticles (AuNPs) within the tubes and filaments when they are exposed to AuCl₃ solutions. Since the gel filaments have a higher loading of DBS-CONHNH₂, they can be loaded with significantly more AuNPs. Cytotoxicity and viability studies on human mesenchymal stem cells show that the DBS-CONHNH₂ and DBS-CONHNH₂/alginate hybrid gels loaded with AuNPs are biocompatible, with the presence of AuNPs enhancing stem cell metabolism. Taken together, these results indicate that DBS-CONHNH₂ can be shaped and 3D-printed, and has considerable potential for use in tissue engineering applications.

Simple fabrication and 3D-printing methods are used to generate tubes and filaments from self-assembled gels, which can be loaded in situ with gold nanoparticles, with the resulting gels encouraging stem cell proliferation.     

Fabrication and characterization of enhanced hydrazine electrochemical sensor based on gold nanoparticles decorated on the vanadium oxide,ruthenium oxide nanomaterials,and carbon nanotubes composites

This work describes the synthesis of mixed oxide film of vanadium and ruthenium by pulsed deposition technique on multiwall carbon nanotubes and the decoration of gold nanoparticles on the mixed film. A ternary electrocatalyst has been developed for the electrochemical oxidation of hydrazine by combining two metal oxide mixtures with Au nanoparticles. Surface morphology and chemical composition of the electrode have been examined with SEM, EDX, HRTEM, EIS, and XRD. The peak current of hydrazine increased 9 times at the AuNPs/(VOx-RuOx)/CNT/GCE compared to the bare GCE, and the peak potential shifted to negative 848 mV. Linear sweep voltammetry (LSV) and amperometric techniques revealed that the AuNPs/(VOx-RuOx)/CNT/GCE displays linear concentration range 2.5–10000 µM (LSV) and the concentration range 0.03–100 µM (amperometry). The limit of detection (LOD) is 0.5 μM and 0.1 μM at (S/N = 3) for LSV and amperometric technique, respectively. The results obtained show a good RSD% of 2.1%–3.2% and reasonable recovery of 97%–108% of hydrazine detection.     

Nanocomposites of nanocrystalline cellulose for enzyme immobilization

We describe the synthesis, characterization and use of a composite material made of a renewable source and metallic nanoparticles for biosensing applications. Nanocrystalline cellulose (NCC) is a product isolated from natural cellulose fibers, which is of approximately 100 nm long and 10 nm wide in size. We augmented the surface area and tailored the chemical affinity of NCC by optimally dressing it with gold nanoparticles (AuNPs). The deposition of AuNPs on NCC was controlled by using cationic polyethylenimine (PEI) at different pHs. AuNPs were thiol-functionalized using different linkers prior to enzyme immobilization. The enzyme (glucose oxidase or GOx) was conjugated on the composite by carbodiimide coupling, and subsequent activation of linker-carboxylic acid group. Our results showed that GOx was attached to the surface of the NCC nanocomposite. Moreover, the amount of GOx loaded onto the support depended on the length of the thiol-linker used. The lower value (20.3 mg/mg of support) was obtained with the longer thiol-linker (11 carbon chain) compared to 25.2 mg/mg of support for the smaller thiol-linker (3 carbon chain).     

Gemini imidazolium amphiphiles for the synthesis, stabilization, and drug delivery from gold nanoparticles

Gold nanoparticles (AuNPs) are considered useful vehicles for medical therapy and diagnosis. Despite the progress made in this field, there is need to find direct, reliable, and versatile synthetic procedures for their preparation as well as new multifunctional coating agents. In this sense, we have explored the use of imidazolium amphiphiles to prepare new AuNPs designed for anion recognition and transport. Thus, in this work we describe (a) the synthesis, by a phase transfer method, of new gold nanoparticles using gemini-type surfactants as ligands based on imidazolium salts, those ligands acting as transfer agents into organic media and also as nanoparticle stabilizers, (b) the examination of their stability in solution, (c) the chemical and physical characterization of the nanoparticles, using a variety of techniques, including UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), (d) toxicity data concerning both the imidazolium ligands and the imidazolium coated nanoparticles, (e) the assessment of their molecular recognition ability toward molecules of biological interest, such as anions and carboxylate containing model drugs, such as ibuprofen, (f) the study of their toxicity and those of their coating ligands, as well as their ability for cell internalization, and (g) the study of their ability for delivering anionic pharmaceuticals. The structurally governed triple role of those new gemini-type surfactants is responsible for the preparation, remarkable stability, and delivery properties of these functional AuNPs.     

Low‐energy ion scattering: Determining overlayer thickness for functionalized gold nanoparticles

With the widespread use of engineered nanoparticles for biomedical applications, detailed surface characterization is essential for ensuring reproducibility and the quality/suitability of the surface chemistry to the task at hand. One important surface property to be quantified is the overlayer thickness of self‐assembled monolayer (SAM) functionalized nanoparticles, as this information provides insight into SAM ordering and assembly. We demonstrate the application of high sensitivity low‐energy ion scattering (HS‐LEIS) as a new analytical method for the fast thickness characterization of SAM functionalized gold nanoparticles (AuNPs). HS‐LEIS demonstrates that a complete SAM is formed on 16‐mercaptohexadecanoic acid (C16COOH) functionalized 14 nm AuNPs. HS‐LEIS also experimentally provides SAM thickness values that are in good agreement with previously reported results from simulated electron spectra for surface analysis of X‐ray photoelectron spectroscopy data. These results indicate HS‐LEIS is a valuable surface analytical method for the characterization of SAM functionalized nanomaterials. Copyright © 2013 John Wiley & Sons, Ltd.     

Rapid synthesis of bovine serum albumin-conjugated gold nanoparticles using pulsed laser ablation and their anticancer activity on hela cells

Nanoscience research aims to produce nanoparticles without adverse effects for medical applications. The pulsed laser ablation (PLA) technique was utilized in this study to synthesize gold nanoparticles (AuNPs) using bovine serum albumin (BSA) in simulated body fluid (SBF) at the fundamental wavelength of the Nd: YAG laser (1064 nm). BSA acted as a stabilizer, reducing and capping agent to produce spherically shaped AuNPs (diameter 3–10 nm). The successful synthesis of AuNPs was confirmed through color changes and UV–vis spectroscopy. The agglomeration and precipitation of AuNPs are attributed to the presence of BSA in the solution, and electrostatic repulsion interactions between BSA and Au nanoclusters. The effect of salt concentration of SBF on BSA stability as well as the interaction of BSA conjugated AuNPs to form complexes was studied using molecular dynamic simulations. Our results show that the stability of AuNPs-BSA conjugates increase with the salt concentration of BSA. Moreover, the synthesized AuNPs exhibit low toxicity and high biocompatibility, supporting their application in drug delivery. Investigation of the cytotoxic effect of the synthesized AuNPs show that normal fibroblast cells (L929) remain intact after treatment whereas a dose-dependent inhibition effect on the growth of cervix cancer cells (HeLa) is observed. In general, this study presents an effective, environmentally-friendly, and facile approach to the synthesis of multifunctional AuNPs using the PLA technique, as a promising efficacious therapeutic treatment of cervical cancer.     

Recent advances in polymer protected gold nanoparticles: synthesis, properties and applications

The use of various functionalized polymers as stabilizers to design metal core-organic shell hybrid nanoparticle architectures has attracted increasing interest for different applications. The feature article reviews recent reports published from 2004 to the beginning of 2007 on the synthesis of polymer protected gold nanoparticles (AuNPs), and also comments their properties and applications.     

MXene–AuNP-Based Electrochemical Aptasensor for Ultra-Sensitive Detection of Chloramphenicol in Honey

A simple and label-free electrochemical aptasensor was developed for ultra-sensitive determination of chloramphenicol (CAP) based on a 2D transition of metal carbides (MXene) loaded with gold nanoparticles (AuNPs). The embedded AuNPs not only inhibit the aggregation of MXene sheets, but also improve the quantity of active sites and electronic conductivity. The aptamers (Apts) were able to immobilize on the MXene–AuNP modified electrode surface through Au–S interaction. Upon specifically binding with CAP with high affinity, the CAP–Apt complexes produced low conductivity on the aptasensor surface, leading to a decreased electrochemical signal. The resulting current change was quantitatively correlated with CAP concentration. Under optimized experimental conditions, the constructed aptasensor exhibited a good linear relationship within a wide range of 0.0001–10 nM and with a low detection limit of 0.03 pM for CAP. Moreover, the developed aptasensor has been applied to the determination of CAP concentration in honey samples with satisfactory results.