Tripyrrindione as a Redox‐Active Ligand: Palladium(II) Coordination in Three Redox States

The tripyrrin‐1,14‐dione scaffold of urinary pigment uroerythrin coordinates divalent palladium as a planar tridentate ligand. Spectroscopic, structural and computational investigations reveal that the tripyrrindione ligand binds as a dianionic radical, and the resulting complex is stable at room temperature. One‐electron oxidation and reduction reactions do not alter the planar coordination sphere of palladium(II) and lead to the isolation of two additional complexes presenting different redox states of the ligand framework. Unaffected by stability problems common to tripyrrolic fragments, the tripyrrindione ligand offers a robust platform for ligand‐based redox chemistry.     

Force Spectroscopy of Individual Stimulus‐Responsive Poly(ferrocenyldimethylsilane) Chains: Towards a Redox‐Driven Macromolecular Motor

Summary: Progress in the development of a redox‐driven macromolecular motor and the characterization of its redox‐mechanical cycle using electrochemical AFM‐based single‐molecule force spectroscopy (SMFS) is described. The elasticities of individual neutral and oxidized poly(ferrocenyldimethylsilane) (PFS) macromolecules were reversibly controlled in situ by adjusting the potential in electrochemical SMFS experiments. For the operating cycle of one individual PFS‐based molecular motor, an output of 3.4 × 10⁻¹⁹ J and an efficiency of 5% have been estimated.

Force‐extension curves of a single‐molecule motor.     

Morphology of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) assemblies in diluted aqueous solution and gel studied by atomic force microscopy

Morphologies of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) triblock copolymer self‐assemblies in the diluted solution and in gel were studied by atomic force microscopy (AFM). The copolymer self‐assembled into wormlike aggregates, of uniform diameter, in water. The wormlike aggregates arranged in order to form separate clusters in the diluted copolymer solution; at a higher copolymer concentration, the clusters became bigger and bigger, and packed together to form gel. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ϵ‐caprolactone) triblock copolymers: Synthesis and self‐assembly in aqueous solutions

Nontoxic and biodegradable poly(?‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(?‐caprolactone) triblock copolymers were synthesized by the solution polymerization of ?‐caprolactone in the presence of poly(ethylene glycol). The chemical structure of the resulting triblock copolymer was characterized with ¹H NMR and gel permeation chromatography. In aqueous solutions of the triblock copolymers, the micellization and sol–gel‐transition behaviors were investigated. The experimental results showed that the unimer‐to‐micelle transition did occur. In a sol–gel‐transition phase diagram obtained by the vial‐tilting method, the boundary curve shifted to the left, and the gel regions expanded with the increasing molecular weight of the poly(?‐caprolactone) block. In addition, the hydrodynamic diameters of the micelles were almost independent of the investigated temperature (25–55 °C). The atomic force microscopy results showed that spherical micelles formed at the copolymer concentration of 2.5 × 10^?4 g/mL, whereas necklace‐like and worm‐like shapes were adopted when the concentration was 0.25 g/mL, which was high enough to form a gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 605–613, 2007     

Synthesis and SFM Study of Comb‐Like Poly(4‐vinylpyridinium) Salts and Their Complexes with Surfactants

Summary: Poly(4‐vinylpyridinium) bromides containing octyl and dodecyl pendant groups were synthesized. Bromide anions in these polymer salts were substituted with dodecylsulfate and bis(2‐ethylhexylsuccinate) anions using ion‐exchange reactions. Initially, P4VP and its derivatives loaded with hydrophobic groups were deposited on a mica surface from diluted solutions in chloroform for visualization. Images of single adsorbed macromolecules were obtained using scanning force microscopy. Original P4VP chains form partially compacted self‐intersecting coils. Loading the polymer chains with large hydrophobic groups and especially the increase in the number of alkyl tails (see Figure) per monomer unit of the polymer chain leads to the stretching of the coils, and the comb‐like macromolecules adopt more and more extended self‐avoiding 2D conformations when deposited on the substrate.

Polymer chains with large hydrophobic groups and increasing number of alkyl tails per monomer unit of the polymer chain.     

Crystallization and stereocomplexation governed self‐assembling of poly(lactide)‐b‐poly(ethylene glycol) to mesoscale structures

The stereocomplex formation between enantioselective poly(lactide) (PLA) homopolymers is well understood. In this report an attempt is made to analyze the influence on the self‐assembling of the stereocomplex of enantiomorphic PLA‐PEG di‐ and tri‐blocks in different solvents. Powder diffraction studies showed the poly(ethylene glycol) (PEG) and the PLA blocks crystallize separately forming unique supra structures like rods, discs and coiled coils with dimensions in the micrometer scale in length and sub‐micrometer scale in diameter. The influence of the solvents on the crystal formation was shown in the formation of uniform structures. Discs emerged from equimolar mixtures of the D ‐ and L ‐configured di‐ and tri‐block copolymers, in dioxan and acetonitrile and in water the stereocomplexes crystallized mainly as rods. In some cases the rods were observed as coiled coils. The shape, the hydrophobic/hydrophilic content and the PEG coated surface of the discs give them a future potential as matrix for the controlled and targeted delivery of bioactive agents. Copyright © 2005 John Wiley & Sons, Ltd.     

Switchable thin‐film surface prepared via a simple grafting‐to method using a polystyrene‐b‐poly(2‐vinylpyridine) copolymer

A polystyrene‐b‐poly(2‐vinylpyridine) block copolymer containing a methylhydridosilane linking group was chemically grafted to an 8‐trichlorosilyloctene monolayer via a simple one‐step hydrosilylation reaction. The resulting Y‐shaped thin film exhibited a low grafting density, which was characteristic of the grafting‐to technique. To further reduce the miscibility of the two arms, methyl iodide was reacted with the poly(2‐vinylpyridine) block to produce quaternary ammonium groups. The surfaces before and after quaternization were both solvent‐switchable when subjected to block‐selective solvents. Tensiometry, ellipsometry, attenuated total reflection/Fourier transform infrared, and atomic force microscopy were used to characterize the properties and morphology of both unquaternized and quaternized samples. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5608–5617, 2006     

Concentration controlled multilevel self‐assembly of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) block copolymers investigated by AFM

Concentration dependent morphology of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) copolymer aggregates in aqueous system was investigated by atomic force microscopy (AFM). The AFM results show that, at a low concentration, 4 × 10^?5 g/mL, spherical micelles occur, and unmicellized molecules are not distributed homogeneously in the copolymer aqueous solution. Unequal outspread clusters composed of wormlike aggregates are formed at a moderate copolymer concentration, 4 × 10^?4 g/mL, those wormlike aggregates are orderly packed in the clusters. At a high concentration of 0.05 g/mL, the copolymer aqueous system is indeed a gel at room temperature, outspread clusters of wormlike aggregates join together to forma network structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1412–1418, 2008     

Regioregular Poly(3‐hexylthiophene) in a Novel Conducting Amphiphilic Block Copolymer

Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm⁻¹, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.

     

Properties of a novel thermal sensitive polymer based on poly(vinyl alcohol) and its layer‐by‐layer assembly

Structurally modified poly(vinyl alcohol) (PVA) was prepared as novel thermally sensitive polymers by partially acetalyzing and/or ionizing the commercially available PVA. Their aqueous solutions experience completely reversible polymer aggregation and dissolution above and below the lower critical solution temperature (LCST), respectively. The LCST of a partially acetalyzed PVA (APVA) can be readily controlled by the degree of acetalysis or the molecular weight of the starting PVA. Introduction of a small amount of cationic group onto the APVA backbone increases the LCST obviously, while the LCST is highly sensitive to NaCl concentration. Then APVA and cationic APVA multilayers are assembled on rayon to make a thermal responsive fiber. The atomic force microscopy (AFM) images of the surface reveal the increment of roughness stimulated by temperature. Copyright © 2007 John Wiley & Sons, Ltd.     

Atomic force microscopy investigation of cold‐plasma‐treated poly(ethyleneterephthalate) textiles

Atomic force microscopy (AFM) has been applied to investigate the morphological and topographical surface modifications induced by radiofrequency cold plasma processing of poly(ethyleneterephthalate) textiles. Surface effects are analysed in low‐pressure air plasma for different plasma exposure times. The results show a progressive degradation of the surface with increasing roughness. The analysis suggests that modification of the surface during textile treatment may be ascribed to a plasma‐induced physical process. Copyright © 2003 John Wiley & Sons, Ltd.     

AFM Study of the Self‐Assembly Behavior of Hexa‐Armed Star Polymers with a Discotic Triphenylene Core

The six‐armed polystyrenes and poly(methyl methacrylate)s with a triphenylene core showed different self‐assembling patterns, isolated cylinders for polySt on mica and highly ordered cylindrical pores for polyMMA on a silicon wafer. With a decrease of polymer concentration in tetrahydrofuran (THF), the size and height of cylinders decreased for polySt, but for polyMMA, the size and depth of the cylindrical pores increased. Slow evaporation of the solvent and a low molecular weight favored the formation of regular patterns.

AFM images of self‐assembling patterns of polySt 1a on mica (A) and of polyMMA 2a on silicon wafer (B).     

Quantifying phase behavior in partially miscible polystyrene/poly(styrene‐co‐4‐bromostyrene) blends

The phase behavior of thin‐film blends of polystyrene (PS) and the random copolymer poly(styrene‐co‐4‐bromostyrene) (PBS) was studied with atomic force microscopy (AFM) and small‐angle X‐ray scattering (SAXS). Phase behavior was studied as a function of the PBS and PS degree of polymerization (N), degree of miscibility [controlled via the volume fraction of bromine in the copolymer (f)], and annealing conditions. The Flory–Huggins interaction parameter χ was measured directly from SAXS as a function of temperature and scaled with f as χ = f²χ_S–BrS [where χ_S–BrS represents the segmental interaction between PS and the homopolymer poly(4‐bromostyrene)] Simulations based on the Flory–Huggins theory and χ measured from SAXS were used to predict phase diagrams for all the systems studied. The PBS/PS system exhibited upper critical solution temperature behavior. The AFM studies showed that increasing f in PBS led to progressively different morphologies, from flat topography (i.e., one phase) to interconnected structures or islands. In the two‐phase region, the morphology was a strong function of N (due to changes in mobility). A comparison of the estimated PBS volume fractions from the AFM images with the PBS bulk volume fraction in the blend suggested the encapsulation of PBS in PS, supporting the work of previous researchers. Excellent agreement between the phase diagram predictions (based on χ measured by SAXS) and the AFM images was observed. These studies were also consistent with interdiffusion measurements of PBS/PS interfaces (with Rutherford backscattering spectroscopy), which indicated that the interdiffusion coefficient decreased with increasing χ in the one‐phase region and dropped to zero deep inside the two‐phase region. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 255–271, 2002     

Metal‐conducting polymer interface studied by Kelvin probe microscopy: Au and Al on poly(3‐octyl‐thiophene)

In this work, we report a Kelvin probe microscopy investigation on the structural and electronic properties of gold and aluminum thin films evaporated on poly(3‐octyl‐thiophene) films. Our experimental setup allows us to perform scanning force microscopy (SFM) studies of the same area even if the sample is taken out of the SFM system for different processes (Au and Al evaporation). This allows a detailed study of the effect of adsorbed metal particles on the morphology and electrical properties of polymer thin films at the nanoscale. We found different behavior for both metals in morphology and electrical properties at the interface. These results can contribute to explain what happens at the metal–polymer interface of the devices when the metal contacts are grown. Thereby the observed nanoscale structural changes can be correlated with the overall performance of the fabricated devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1083–1093     

Fabrication of Micropatterned Gold Nanoparticle Arrays as a Template for Surface‐Initiated Polymerization of Stimuli‐Responsive Polymers

Summary: This paper demonstrates a new, reliable, and simple method for fabricating micropatterned nanoparticle arrays that can serve as templates for the surface‐initiated polymerization of polymer brushes. As a proof of concept, we micropatterned gold nanoparticles (Au‐NPs, ≈10 nm) onto glass, silicon, polystyrene, and gold surfaces by a simple three‐step process: (1) microcontact printing of soluble polymer, (2) incubation with a solution of Au‐NPs, and (3) lift‐off of the template in a mixture of ethanol and deionized water. 40 µm wide features were successfully fabricated without any significant defects or nonspecific adsorption on the background. To demonstrate the utility of these Au‐NP templates, we subsequently polymerized N‐isopropylacrylamide by surface‐initiated polymerization, using a surface‐bound initiator.

Synthesis of PNIPAAm brushes from micropatterned Au‐NP.     

Graft‐crosslinked Copolymers Based on Poly(arylene ether ketone)‐gc‐sulfonated Poly(arylene ether sulfone) for PEMFC Applications

Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide‐terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)‐catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft‐crosslinked membranes as polymer electrolyte membranes. The phenoxide‐terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by ¹H NMR and tapping‐mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase‐separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30–90% relative humidity. The anisotropic proton conductivity ratios (σ_⟂/||) of the membranes in water are in the range 0.65–0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft‐crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.

     

Diblock copolymers,micelles, and shell‐crosslinked nanoparticles containing poly(4‐fluorostyrene): Tools for detailed analyses of nanostructured materials

Amphiphilic core–shell nanostructures containing ¹⁹F stable isotopic labels located regioselectively within the core domain were prepared by a combination of atom transfer radical polymerization (ATRP), supramolecular assembly, and condensation‐based crosslinking. Homopolymers and diblock copolymers containing 4‐fluorostyrene and methyl acrylate were prepared by ATRP, hydrolyzed, assembled into micelles, and converted into shell‐crosslinked nanoparticles (SCKs) by covalent stabilization of the acrylic acid residues in the shell. The ATRP‐based polymerizations, producing the homopolymers and diblock copolymers, were initiated by (1‐bromoethyl)benzene in the presence of CuBr metal and employed N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the coordinating ligand for controlled polymerizations at 75–90 °C for 1–3 h. Number‐average molecular weights ranged from 2000 to 60,000 Da, and molecular weight distributions, generally less than 1.1 and 1.2, were achieved for the homopolymers and diblock copolymers, respectively. Methyl acrylate conversions as high as 70% were possible, without observable chain–chain coupling reactions or molecular weight distribution broadening, when bromoalkyl‐terminated poly(4‐fluorostyrene) was used as the macroinitiator. Poly(4‐fluorostyrene), incorporated as the second segment in the diblock copolymer synthesis, was initiated from a bromoalkyl‐terminated poly(methyl acrylate) macroinitiator. After hydrolysis of the poly(methyl acrylate) block segments, micelles were formed from the resulting amphiphilic block copolymers in aqueous solutions and were then stabilized by covalent intramicellar crosslinking throughout the poly(acrylic acid) shells to yield SCKs. The SCK nanostructures on solid substrates were visualized by atomic force microscopy and transmission electron microscopy. Dynamic light scattering was used to probe the effects of crosslinking on the resulting hydrodynamic diameters of nanoparticles in aqueous and buffered solutions. The presence of fluorine atoms in the diblock copolymers and resulting SCK nanostructures allowed for characterization by ¹⁹F NMR in addition to ¹H NMR, ¹³C NMR, and IR spectroscopy. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4152–4166, 2001