Photopatterning of Crosslinkable Hole‐Conducting Materials for Application in Organic Light‐Emitting Devices

Summary: Modern multilayer organic light‐emitting devices (OLED) are fabricated easily and at low cost by spin‐coating with subsequent crosslinking of the layers. For this purpose, a low‐molecular‐weight hole‐transport material based on triphenyl amines bearing crosslinkable oxetane groups was synthesized. Crosslinking of the spin‐coated layer was initiated with UV irradiation using an iodonium‐salt photoinitiator and was observed using realtime FT‐IR spectroscopy. Standard photolithography techniques can be used for structuring the material on the micrometre scale.

An AFM image of the photopatterned bis‐oxetane‐functionalized low‐molecular‐weight hole‐transport material based on triphenyl amines synthesized here.     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid

We demonstrated that density functional theory calculations provide a reliable and quantitative prediction of the trends in C? S bond dissociation energies using several model compounds as photoinitiator. On the basis of this information, we designed a possible photofunctional initiator for the polymerization of hydrophilic vinyl monomers. Photopolymerization of 2‐hydroxyethyl methacrylate (HEMA) hydrophilic monomer was carried out in ethanol initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid (DTCA) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated first order in monomer. The molecular weight of the poly(2‐hydroxyethyl methacrylate) (PHEMA) increased with increasing conversion. The molecular weight distribution (M_w/M_n) of the PHEMA was about 1.5. Methyl methacrylate (MMA) could also be polymerized in a living fashion with such a PHEMA precursor as a macroinitiator because PHEMA exhibited a dithiocarbamate (DC) group at its terminal end. This system could be applied to the architecture of amphiphilic block copolymers. It was concluded that these polymerization systems proceeded with controlled radical mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 76–82, 2004     

Model‐based design and synthesis of gradient MMA/tBMA copolymers by computer‐programmed semibatch atom transfer radical copolymerization

Methyl methacrylate (MMA)/tert‐butyl methacrylate (tBMA) gradient copolymers having linear and hyperbolic composition profiles were synthesized. These special copolymer products were achieved via a model‐based computer‐controlled semibatch atom transfer radical copolymerization (ATRcoP) process. A simple ATRcoP model was developed based on the terminal model. The equilibrium constants in the ATRP of MMA and tBMA were estimated by the data correlation. The model was verified by batch experiments and was found to give good correlation for the polymerization rate, molecular weight, and copolymer composition data. The model coupled with a reactor model was then applied to the semibatch ATRcoP and was used to calculate comonomer feeding rates for the targeted gradient composition profiles. It was found that the experimental monomer conversion, molecular weight, and cumulative copolymer composition were in good agreement with their targeted theoretical values. The gradient copolymers had low polydispersities close to 1.1. This work demonstrated the feasibility of the model‐based semibatch ATRcoP in fine‐tuning gradient copolymer composition profiles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 69–79, 2009     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

Novel PU‐type polymeric photoinitiator comprising side‐chain benzophenone and coinitiator amine for photopolymerization of PU acrylate

A novel diamine 3,5‐diamino‐4′‐phenoxylbenzophenone (DAPBP) was synthesized from the reaction of 3,5‐diamino‐4′‐chlorobenzophenone (DACBP) and phenol. Then through the polycondensation of DAPBP, toluene‐2,4‐diisocyanate (TDI), and N‐methyldiethanolamine (MDEA), we obtained a PU‐type polymeric photoinitiator containing side‐chain benzophenone (BP) and tertiary amine in the same macromolecule (PUSOA). Another polymeric photoinitiator without coinitiator amine in polymer chain (PUSO) was also synthesized for comparison. FT‐IR, ¹H NMR, and GPC analyses confirmed the structures of monomer and polymeric photoinitiators. The UV–Vis spectra of PUSOA, PUSO, and DAPBP are similar, and all exhibit the maximal absorption near 290 nm. ESR spectra indicate that PUSOA can generate active species most efficiently. The photopolymerization of PU acrylate, initiated by PUSOA, PUSO/MDEA, DAPBP/MDEA, and BP/MDEA, was studied by differential scanning photocalorimetry (photo‐DSC). The results show that the in‐chain coinitiator amine can significantly improve the photoefficiency of the polymeric photoinitiator and the PUSOA is more efficient for the polymerization of PU acrylate than its low‐molecular‐weight counterpart. Copyright © 2008 John Wiley & Sons, Ltd.     

Photo‐induced polymerization of methyl methacrylate/cyclodextrin complex in aqueous solution

Polymerization of hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) complex of methyl methacrylate (MMA) (MMA/HP‐β‐CD) was carried out under UV irradiation in aqueous solution with Irgacure 2959 (4‐(2‐hydroxyethoxy)phenyl‐(2‐hydroxy‐2‐propyl)ketone) as a photoinitiator at room temperature. The effects of some principal factors, including UV irradiation intensity, initiator concentration, and the ratio of HP‐β‐CD to MMA, on the polymerization were investigated in detail. Compared to the corresponding thermal polymerization, photo‐induced polymerization of the MMA/HP‐β‐CD complex could be accomplished at a higher speed; the polymerization conversion in photo‐induced polymerization reached 94% within 30 min, while it was only 62% for the thermal polymerization of 16 hr at 70°C. The number‐average molecular weight (M_n) and polymerization conversion decreased with the increase in UV intensity and initiator concentration. The resulting PMMA precipitated spontaneously from the solution during polymerization in the absence of any precipitator. About 95 wt% of the HP‐β‐CD remained in the solution after polymerization and the reusability of the residual HP‐β‐CD was experimentally demonstrated. Copyright © 2008 John Wiley & Sons, Ltd.     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Three‐Arm Star Homo‐ and Block Co‐Polymers Via Atom Transfer Radical Polymerization

Star homopolymers of some vinyl monomers such as methyl methacrylate, n‐butyl methacrylate and styrene (MMA, nBMA, St.) were prepared by using a N,N,N′N′‐tetramethylethylenediamine ligand/CuBr catalytic system via atom transfer radical polymerization (ATRP). A three armed benzene based core was successfully used as initiator. Low polydispersities and regular molecular weight values were obtained in most cases, especially at low conversions. MMA and BMA showed comparable behavior where controlled and true ATRP was observed even at high conversions. However, styrene monomer recorded irregular high polydispersities at high conversions in spite of the relatively low molecular weight values. Some block copolymers were obtained using MMA homopolymer as macroinitiator with the same strategy of ATRP. ¹H‐NMR confirmed the structures of the resulting polymers. Transmission electron microscopy (TEM) proved the nano‐structure of the star polymers. The thermal behavior of the MMA star homo and copolymers was studied. The effect of the star shape on thermal behavior was very clear with respect to the linear ones.     

Controlled Anionic Synthesis of Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate]

Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate] (poly(NCzMA)) with controlled molecular weight and narrow molecular weight distribution was successfully synthesized using (methyl methacryloyl)potassium (MMA) as a weak initiator in the presence of diethylzinc (Et₂Zn) in THF at –78°C. Et₂Zn acted both as an additive for the coordination with enolate anion and nitro group and as a scavenger to remove impurities. Block copolymers PMMA‐block‐poly(NCzMA)‐block‐PMMA and poly(NCzMA)‐block‐PS‐block‐poly(NCz‐MA), were also synthesized quantitatively (PMMA: poly(methyl methacrylate), PS: polystyrene). The results indicate that Et₂Zn can be used to synthesize the polymers of solid, nitro group‐containing methacrylate monomers by anionic polymerization in THF.     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Synthesis of a novel liquid crystal rod–coil star block copolymer consisting of poly(methyl methacrylate) and poly{2,5‐bis[(4‐methoxy‐phenyl)oxycarbonyl] styrene} via atom transfer radical polymerization

A bromine capped star‐shaped poly(methyl methacrylate) (S‐PMMA‐Br) was synthesized with CuBr/sparteine/PT‐Br as a catalyst and initiator to polymerize methyl methacrylate (MMA) according to atom transfer radical polymerization (ATRP). Then, with S‐PMMA‐Br as a macroinitiator, a series of new liquid crystal rod–coil star block copolymers with different molecular weights and low polydispersity were obtained by this method. The block architecture {coil‐conformation of the MMA segment and rigid‐rod conformation of 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene segment} of the four‐armed rod–coil star block copolymers were characterized by ¹H NMR. The liquid‐crystalline behavior of these copolymers was studied by differential scanning calorimetry and polarized optical microscopy. We found that the liquid‐crystalline behavior depends on the molecular weight of the rigid segment; only the four‐armed rod–coil star block copolymers with each arm's M_n,_GPC of the rigid block beyond 0.91 × 10⁴ g/mol could form liquid‐crystalline phases above the glass‐transition temperature of the rigid block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 733–741, 2005     

Preparation of Fluorine-Containing Polyacrylate Emulsion by a UV-initiated Polymerization

A fluorine-containing polyacrylate emulsion was synthesized by a UV-initiated emulsion polymerization from methyl methacrylate (MMA) and hexafluorobutly methacrylate (HFMA) in the presence of 2-hydroxy-4-(2-hydroxyethoxy)-2-methyl-propiophenone (Irgacure 2959) as a hydrophilic photoinitiator at room temperature. The latex and films were characterized by Fourier transformed infrared (FT-IR) spectrometry, nuclear magnetic resonance (¹H-NMR, ¹⁹F-NMR) spectrometry, transmission electron microscopy (TEM), recycling gel permeation chromatography (GPC), dynamic light scattering (DLS), and contact angle (CA) analysis, respectively. The effects of photoinitiator and emulsifier concentration on the polymerization were discussed. Compared to the corresponding thermal polymerization, UV-initiated polymerization of the MMA/HFMA emulsion could be accomplished at a much higher speed. The polymerization conversion in UV-initiated polymerization reached 95% within 10 min at an emulsifier concentration of 0.6 wt%, photoinitiator concentration of 0.4 wt%, and monomer concentration of 10 wt%.     

Tuning gradient property and initiating gradient photopolymerization of acrylamide aqueous solution of a hydrosoluble photocleavage polysiloxane‐based photoinitiator

A novel hydrosoluble photocleavage polysiloxane photoinitiator W‐Si‐HHMP₂ used for preparing a gradient polymer was synthesized on the basis of 2‐hydroxy‐1‐[4‐(2‐hydroxyethoxy)phenyl]‐2‐methyl propan‐1‐one (HHMP) and aminopolysiloxane. The water solubility of the photoinitiator, the kinetics of photopolymerization, and the self‐floating ability were investigated. This photoinitiator shows relatively good solubility in water and excellent photoinitiating efficiency, and has good floating capability due to lower surface tension and energy of polysiloxane. More importantly, it is proved that the gradient polymer with gradient molecular weight was obtained by controlling the concentration gradient of W‐Si‐HHMP₂ and presented an excellent yellowing resistance. The enrichment of W‐Si‐HHMP₂ on the surface caused by its good self‐floating ability can decrease the dispersion surface energy of gradient polymer film and generate a more hydrophobic surface. The W‐Si‐HHMP₂ can efficiently initiate gradient photopolymerization to prepare gradient materials and has a great potential application in gradient materials. Copyright © 2014 John Wiley & Sons, Ltd.     

Grafting of polymers onto a carbon‐fiber surface by ligand‐exchange reaction of poly(vinyl ferrocene‐co‐vinyl monomer) with polycondensed aromatic rings of the surface

To improve the surface of carbon fiber, the grafting reaction of copolymer containing vinyl ferrocene (VFE) onto a carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber was investigated. The copolymer containing VFE was prepared by the radical copolymerization of VFE with vinyl monomers, such as methyl methacrylate (MMA) and styrene, using 2,2′‐azobisisobutyronitrile as an initiator. By heating the carbon fiber with poly(VFE‐co‐MMA) (number‐average molecular weight: 2.1 × 10⁴) in the presence of aluminum chloride and aluminum powder, the copolymer was grafted onto the surface. The percentage of grafting reached 46.1%. On the contrary, in the absence of aluminum chloride, no grafting of the copolymer was observed. Therefore, it is considered that the copolymer was grafted onto the carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber. The molar number of grafted polymer chain on the carbon‐fiber surface decreased with increasing molecular weight of poly(VFE‐co‐MMA) because the steric hindrance of grafted copolymer on the carbon‐fiber surface increases with increasing molecular weight of poly(VFE‐co‐MMA). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1868–1875, 2002     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

End‐linked amphiphilic polymer conetworks: Synthesis by sequential atom transfer radical polymerization and swelling characterization

Conetworks based on end‐linked homopolymers and amphiphilic gradient copolymers were synthesized by the atom transfer radical polymerization (ATRP) of 2‐(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic monomer), methyl methacrylate (MMA, hydrophobic monomer), and ethylene glycol dimethacrylate (EGDMA, hydrophobic cross‐linker). Sequential, rather than step‐wise polymerizations, were performed to enhance the livingness of the polymerization, particularly for the end‐linking step, and to ultimately obtain conetworks based on gradient rather than pure block copolymers. Amphiphilic conetworks based on end‐linked MMA‐DMAEMA‐MMA gradient copolymers of different compositions were successfully synthesized as confirmed by the narrow molecular weight distributions of the linear precursors, the rigidity of the amphiphilic conetwork products and the low sol‐fraction extracted from the conetworks. Similarly successful was the ATRP synthesis of an end‐linked conetwork based on a DMAEMA‐MMA statistical copolymer and of a randomly cross‐linked conetwork that resulted from the simultaneous terpolymerization of DMAEMA, MMA and EGDMA. An amphiphilic conetwork based on an end‐linked DMAEMA‐MMA‐DMAEMA gradient copolymer presented a less rigid, mucous‐like, texture. The degrees of swelling (DS) in tetrahydrofuran of all the conetworks were higher than those measured in pure water, whereas the aqueous DS values increased by lowering the pH and increasing the DMAEMA content of the conetworks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1878–1886, 2010     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Synthesis of well‐defined cyclodextrin‐core star polymers

The synthesis of 21‐arm methyl methacrylate (MMA) and styrene star polymers is reported. The copper (I)‐mediated living radical polymerization of MMA was carried out with a cyclodextrin‐core‐based initiator with 21 independent discrete initiation sites: heptakis[2,3,6‐tri‐O‐(2‐bromo‐2‐methylpropionyl]‐β‐cyclodextrin. Living polymerization occurred, providing well‐defined 21‐arm star polymers with predicted molecular weights calculated from the initiator concentration and the consumed monomer as well as low polydispersities [e.g., poly(methyl methacrylate) (PMMA), number‐average molecular weight (M_n) = 55,700, polydispersity index (PDI) = 1.07; M_n = 118,000, PDI = 1.06; polystyrene, M_n = 37,100, PDI = 1.15]. Functional methacrylate monomers containing poly(ethylene glycol), a glucose residue, and a tert‐amine group in the side chain were also polymerized in a similar fashion, leading to hydrophilic star polymers, again with good control over the molecular weight and polydispersity (M_n = 15,000, PDI = 1.03; M_n = 36,500, PDI = 1.14; and M_n = 139,000, PDI = 1.09, respectively). When styrene was used as the monomer, it was difficult to obtain well‐defined polystyrene stars at high molecular weights. This was due to the increased occurrence of side reactions such as star–star coupling and thermal (spontaneous) polymerization; however, low‐polydispersity polymers were achieved at relatively low conversions. Furthermore, a star block copolymer consisting of PMMA and poly(butyl methacrylate) was successfully synthesized with a star PMMA as a macroinitiator (M_n = 104,000, PDI = 1.05). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2206–2214, 2001     

苯氧铜/正丁基锂体系引发MMA负离子聚合及其活性特征的研究

采用苯氧铜/正丁基锂(PhOCu/n-BuLi)体系引发MMA聚合, 通过GPC, ¹H NMR对聚合物进行了表征. 实验结果表明, 该体系聚合反应速度较快, 温度、引发体系组成是影响聚合物分子量及其分布、单体转化率、引发剂引发效率、聚合物的立构规整性的主要因素; －40 ℃时分子量分布比较窄, 但引发效率也比较低(大约15%). 低引发效率、宽分子量分布与引发剂的聚集状态有关. 分子量与单体浓度、引发剂浓度的关系说明, 该体系具有一定程度的活性聚合特点.     

Supported atom transfer radical polymerization of methyl methacrylate mediated by CuBr–tetraethyldiethylenetriamine grafted onto silica gel

Silica‐gel particles grafted with tetraethyldiethylenetriamine were synthesized as support for CuBr for the heterogeneous atom transfer radical polymerization of methyl methacrylate (MMA). The immobilized CuBr mediated a living polymerization of MMA, demonstrated by an increase in molecular weight with conversion and low polydispersity. An excessive amount of catalyst (typically, CuBr/initiator = 1.5) was required to achieve a living process because of the limited mobility of the supported catalyst. The silica‐gel concentration had a strong effect on the polymerization. The recycled catalyst still mediated a living process but showed a reduced catalytic activity due to the presence of Cu(II). After being regenerated by a reaction with Cu(0), the catalyst regained its activity. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1051–1059, 2001