One‐Step Preparation of Electrospun Microfibrous Polystyrene Mats Having Surface Enriched in p‐tert‐Butylcalix[4]arene Fitted with Phosphinoyl Pendant Arms

Polystyrene microfibers containing lower‐rim substituted calix[4]arene with phosphinoyl pendant arms were easily prepared in one‐step procedure by electrospinning. A specific feature of the fibers is the difference in their functionality at the surface and in the bulk. The graded structure of the fibers was shown by XPS analyses. The calix[4]arene concentration in the 3–5 nm surface layer was 50% higher than the theoretically calculated if calix[4]arene was uniformly distributed in the fibers. A six‐coordinated complex was formed between the calix[4]arene included in the fibers and Ni²⁺ ions. The distribution of phosphorus along the fibers is uniform, as evidenced by X‐ray mapping.

     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Characterization of Chlorine‐, Amine‐ and Acrylate‐Functionalized TEMPO‐Capped and Bis‐TEMPO‐Capped Polystyrenes Using MALDI‐TOF MS

Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.

MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix.     

Fluorinated Poly(aryl ether) Containing a 4‐Bromophenyl Pendant Group and its Phosphonated Derivative

Summary: A high‐molecular‐weight fluorinated poly(aryl ether) with a 4‐bromophenyl pendant group has been synthesized based on a bromo‐bisphenol. A phosphonic acid derivative is readily prepared from this in high conversion yield. The phosphonated polymer possesses excellent thermal, oxidative, and dimensional stability, low methanol permeability, and reasonable proton conductivity, and may be a candidate polymeric electrolyte membrane for fuel cell applications.

Synthesis of a poly(aryl ether) with a phosphonic acid group.     

A New Approach to High‐Capacity Functionalized Monoliths via Post‐Synthesis Grafting

A new approach toward the grafting of norborn‐2‐ene derivatives onto ROMP‐based monolithic supports has been developed. Grafting yields were governed by three variables, which are the catalyst, temperature and the crosslinker used. Three different catalysts, three grafting temperatures, as well as two different crosslinkers were investigated. By optimizing all variables 4‐fold amounts of grafted monomers compared to previously reported procedures were obtained reaching values of 1.04 mmol of monomer/g monolith.

Grafted monolithic supports applying the method reported here.     

Ring Opening Polymerization of Lactide under Solvent‐Free Conditions Catalyzed by a Chlorotitanium Calix[4]arene Complex

A novel chlorotitanium calix[4]arene complex was synthesized and tested, without activator, as catalyst for the polymerization of L ‐ and rac‐lactide under solvent‐free conditions. The catalyst displayed high activity, which depended on the monomer‐to‐catalyst molar ratio, and led to highly isotactic PLLA. Despite concomitant transesterification during the polymerization, polylactide formation was well‐controlled, the molar mass distribution indexes remaining in the restricted range of 1.2–1.4.

     

Synthesis and Characterization of β‐Cyclodextrin Based Functional Monomers and its Copolymers with N‐isopropylacrylamide

Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.

Synthesis route of monovinyl β‐CD monomers.     

A Facile Route to Prepare Organic/Inorganic Hybrid Nanomaterials by ‘Click Chemistry’

An organosilane with an alkyne group at the non‐condensable end, [(2‐propynylcarbamate)propyl]triethoxysilane, has been synthesized. Condensation of this organosilane with tetraethoxysilane can be achieved by a co‐condensation strategy to produce silica nanoparticles with surface alkyne functionality. The size and uniformity of size distribution of the silica nanoparticles are influenced by varying the concentration of the added organosilane. The alkyne‐functionalized silica nanoparticles are coupled directly with azide‐modified polymers by ‘click chemistry’ to yield organic–inorganic hybrid nanomaterials.

     

Synthesis and Optical Properties of Dendronized Porphyrin Polymers

Summary: A novel kind of dendronized porphyrin polymers was synthesized by Sonogashira coupling of diethynyl‐functionalized porphyrin monomers and diiodo‐functionalized macromonomers bearing Fréchet‐type dendrons. The encapsulation of red‐light‐emitting porphyrin‐containing conjugated backbones into dendronized polymers can not only reduce the aggregation of polymer backbones and the self‐quenching of their fluorescence but also endow the porphyrin polymers with good solubility. We also report the optical and electrochemical properties of the porphyrin‐containing dendronized polymers.

Synthesis of a novel kind of dendronized porphyrin polymers by Sonogashira coupling of diethynyl‐functionalized porphyrin monomers and diiodo‐functionalized dendritic macromonomers.     

The Structure and Thermodynamics of a Heteropolymer Chain in Confinement – Computer Simulation Studies

A coarse‐grained model of heteropolymer (polypeptide) chains in a slit was designed in order to study the folding process in confinement. The idealized chains represented heteropolymers consisted of hydrophobic and hydrophilic united atoms, which were restricted to vertices of a (310) lattice. The force field consisted of the excluded volume, the long‐distance potential between pairs of segments and the local helical potential. Monte Carlo simulations were performed using the algorithm with micromodifications of the chain's conformation and employing the Replica Exchange technique. The influence of the size of the slit, the temperature and the force field on the dimension and the structure of chains were studied. It was shown that a moderate confinement stabilizes folded chains while a strong confinement does not.

     

Ethylene and Ethylene/Propylene Polymerization Behavior of Bis(phenoxy‐imine) Zr and Hf Complexes with Perfluorophenyl Substituents

The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.

Structures of complexes 1 – 4 .     

Highly Thermal Stable Main‐Chain Nonlinear Optical Polyimide Based on Two‐Dimensional Carbazole Chromophores

Summary: A new NLO‐active lambda‐shaped main‐chain polyimide that comprises a two‐dimensional carbazole chromophore was synthesized. This polyimide exhibits high thermal and temporal stability. It can endure temperatures of up to 240 °C for a transient time and maintain a large SH signal at 100 °C for a long time because embedding the two‐dimensional chromophores into the polymer backbone effectively suppresses the randomization of the oriented dipole at high temperatures.

     

Nickel(II) α‐Diimine Catalyst for Grignard Metathesis (GRIM) Polymerization

A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol⁻¹. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.

     

Polymer/Laponite Composite Latexes: Particle Morphology,Film Microstructure,and Properties

Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.

     

Micelles Formed by Cylindrical Brush‐Coil Block Copolymers

Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.

Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PⁱBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block.     

Synthesis and Characterization of Novel Mesogen‐Jacketed Liquid Crystalline Miktoarm Star Rod‐Coil Block Copolymer

Summary: A series of novel mesogen‐jacketed liquid crystal miktoarm star rod‐coil block copolymers were synthesized via atom transfer radical polymerization (ATRP). Their architectures {coil conformation of styrene segment and rigid rod conformation of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) segment} were confirmed by GPC, ¹H NMR, and MALDI‐TOF studies. The liquid crystalline behaviors of the synthesized copolymers are evidenced from POM observation. The liquid crystalline phase depends on the molecular weights of the rigid rod arm of miktoarm star copolymers.

Miktoarm star rod‐coil block copolymer.     

Microparticle‐Supported Conjugated Polyelectrolyte Brushes Prepared by Surface‐Initiated Kumada Catalyst Transfer Polycondensation for Sensor Applications

A ‘grafting‐from’ approach to synthesize microparticle‐supported conjugated polyelectrolyte brushes is presented. Poly(3‐bromohexylthiophene) is selectively grown from monodisperse organosilica microparticles by surface‐initiated Kumada catalyst‐transfer polycondensation (SI‐KCTP) and then ionizable amino groups are introduced by a two‐step polymer analogous transformation. Optical properties of the resulting microparticle‐supported conjugated polyelectrolyte brushes were found to be dependent on the surrounding chemical environment and thus the particles are promising materials for sensor applications.

     

Parallel Algorithm for 3D SCF Simulation of Copolymers With Flexible and Rigid Blocks

Numerical SCFT simulations of inhomogeneous polymers at the mesoscale can easily become computationally extremely demanding as the size (spatial resolution) of the simulated 3D system increases, making massively parallel computing a necessity. A new parallel algorithm for large‐scale 3D SCFT simulations of rod‐coil copolymers with interplay between microphase separation and orientational ordering is presented. For large systems, this algorithm scales well up to 1024 processors, achieving more than 200‐fold speedups. While existing SCFT simulations were limited to studying 1D and 2D models, this algorithm is applied to new, intrinsic 3D structures such as a hexagonally arranged columnar morphology that possesses macroscopic chirality arising as a result of spontaneous symmetry breaking.

     

High‐Throughput Fabrication,Performance Testing,and Characterization of One‐Dimensional Libraries of Polymeric Compositions

A new general approach for rapid performance‐screening of polymer compositions is provided. Multiple compositions are generated as one‐dimensional libraries in a microextruder with step‐ or gradient‐composition changes in 2–10 g of polymer in < 1 min. To accelerate testing, environmental stress is applied to only local regions, followed by high‐sensitivity spatially resolved characterization. We applied our methodology for weathering of arrays of polymeric compositions and provided ranking of polymer/UV absorber compositions equivalent to traditional weathering data while achieved 20 times faster.

Sampling and measurement strategies for HT analysis of combinatorial 1D polymeric libraries: (1) spectroscopic monitoring of chemical properties, (2) in‐situ monitoring of mass and viscoelastic properties, (3) scanning spectroscopic analysis, and (4) spectroscopic imaging of a coiled polymeric array.