Investigation on Distribution and Risk Assessment of Volatile Organic Compounds in Surface Water,Sediment, and Soil in a Chemical Industrial Park and Adjacent Area

The occurrences, distributions, and risks of 55 target volatile organic compounds (VOCs) in water, sediment, sludge, and soil samples taken from a chemical industrial park and the adjacent area were investigated in this study. The Σ₅₅-VOCs concentrations in the water, sediment, sludge, and soil samples were 1.22–5449.21 μg L⁻¹, ND–52.20 ng g⁻¹, 21.53 ng g⁻¹, and ND–11.58 ng g⁻¹, respectively. The main products in this park are medicines, pesticides, and novel materials. As for the species of VOCs, aromatic hydrocarbons were the dominant VOCs in the soil samples, whereas halogenated aliphatic hydrocarbons were the dominant VOCs in the water samples. The VOCs concentrations in water samples collected at different locations varied by 1–3 orders of magnitude, and the average concentration in river water inside the park was obviously higher than that in river water outside the park. However, the risk quotients for most of the VOCs indicated a low risk to the relevant, sensitive aquatic organisms in the river water. The average VOCs concentration in soil from the park was slightly higher than that from the adjacent area. This result showed that the chemical industrial park had a limited impact on the surrounding soil, while the use of pesticides, incomplete combustion of coal and biomass, and automobile exhaust emissions are all potential sources of the VOCs in the environmental soil. The results of this study could be used to evaluate the effects of VOCs emitted from chemical production and transportation in the park on the surrounding environment.     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.     

Mechanisms of Tebuconazole Adsorption in Profiles of Mineral Soils

The study attempted to identify the soil components and the principal adsorption mechanisms that bind tebuconazole in mineral soils. The K_F values of the Freundlich isotherm determined in 18 soils from six soil profiles in batch experiments after 96 h of shaking ranged from 1.11 to 16.85 μg^1−1/n (mL)^1/n g⁻¹, and the exponent 1/n values from 0.74 to 1.04. The adsorption of tebuconazole was inversely correlated with the soil pH. Both neutral and protonated forms of this organic base were adsorbed mainly on the fraction of humins. The adsorption of the protonated form increased in the presence of hydrogen cations adsorbed in the soil sorption sites. Fourier transform infrared spectroscopy coupled with the molecular modeling studies and partial least squares regression analysis indicated that the tebuconazole molecule is bound in the organic matter through the formation of hydrogen bonds as well as hydrophobic and π–π interactions. Ion exchange was one of the adsorption mechanisms of the protonated form of this fungicide. The created mathematical model, assuming that both forms of tebuconazole are adsorbed on the organic matter and adsorption of the protonated form is affected by the potential acidity, described its adsorption in soils well.     

Development and Validation of Liquid Chromatography-Tandem Mass Spectrometry Methods for the Quantification of Cefquinome,Ceftiofur, and Desfuroylceftiofuracetamide in Porcine Feces with Emphasis on Analyte Stability

Cefquinome and ceftiofur are β-lactam antibiotics used for the treatment of bacterial infections in swine. Although these antimicrobials are administered intramuscularly, the exposure of the gut microbiota to these cephalosporins is not well described. This exposure can contribute to the emergence and spread of antimicrobials in the environment and to the possible spread of antimicrobial resistance genes. To assess the impact of drug administration on the intestinal excretion of these antimicrobials it is essential to measure the amounts of native compound and metabolites in feces. Two (ultra)-high-performance liquid chromatography-tandem mass spectrometry ((U)HPLC–MS/MS) methods were developed and validated, one for the determination of cefquinome and ceftiofur and the other for the determination of ceftiofur residues, measured as desfuroylceftiofuracetamide, in porcine feces. The matrix-based calibration curve was linear from 5 ng g⁻¹ to 1000 ng g⁻¹ for cefquinome (correlation coefficient (r) = 0.9990 ± 0.0007; goodness of fit (gof) = 3.70 ± 1.43) and ceftiofur (r = 0.9979 ± 0.0009; gof = 5.51 ± 1.14) and quadratic from 30 ng g⁻¹ to 2000 ng g⁻¹ for desfuroylceftiofuracetamide (r = 0.9960 ± 0.0020; gof = 7.31 ± 1.76). The within-day and between-day precision and accuracy fell within the specified ranges. Since β-lactam antibiotics are known to be unstable in feces, additional experiments were conducted to adjust the sampling protocol in order to minimize the impact of the matrix constituents on the stability of the analytes. Immediately after sampling, 500 µL of an 8 µg mL⁻¹ tazobactam solution in water was added to 0.5 g feces, to reduce the degradation in matrix.     

Confirmatory Analysis of Per and Polyfluoroalkyl Substances in Milk and Infant Formula Using UHPLC–MS/MS

An ultra-high performance liquid chromatography tandem mass spectrometry method was developed and validated for the sensitive determination and unambiguous confirmation of residues of per and polyfluorinated alkyl substances (PFAS) in breastmilk, retail milk and infant formulas following two sample preparation methods. Sample pre-treatment was carried out by a simplified QuEChERS method without requiring dSPE or any further clean-up. The method was validated in accordance with the requirements of Commission Decision 657/2002/EC with slight modifications. The method displayed good linearity with R² ranging from 0.9843–0.9998 for all target PFAS. The recovery and within-laboratory reproducibility of the method (n = 63) were in the range 60–121% and 5–28%, respectively. The decision limit, detection capability and limit of quantitation ranged from 30–60 ng kg⁻¹ to 40–100 ng kg⁻¹ and 5–50 ng kg⁻¹, respectively. Acceptable matrix effect values in the range −45–29% were obtained with uncertainty of measurement lower than 25% for all target PFAS. The method displays its suitability for the sensitive and high-throughput confirmatory analysis of C₄–C₁₄ PFAS in breastmilk, dairy milk and infant formulas.     

Use of a Hydrophobic Azo Dye for the Centrifuge-Less Cloud Point Extraction–Spectrophotometric Determination of Cobalt

The hydrophobic azo dye 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR, H₂L) was studied as part of a system for the centrifuge-less cloud point extraction (CL-CPE) and spectrophotometric determination of traces of cobalt. The extracted 1:2 (Co:HTAR) complex, [Co^III(HL⁻)(L²⁻)]⁰, shows an absorption maximum at 553 nm and contains HTAR in two different acid–base forms. Optimum conditions for its formation and CL-CPE were found as follows: 1 × 10⁻⁵ mol L⁻¹ of HTAR, 1.64% of Triton X-114, pH of 7.8, incubation time of 20 min at ca. 50 °C, and cooling time of 30 min at ca. −20 °C. The linear range, limit of detection, and apparent molar absorptivity coefficient were 5.4–189 ng mL⁻¹, 1.64 ng mL⁻¹, and 2.63 × 10⁵ L mol⁻¹ cm⁻¹, respectively. The developed procedure does not use any organic solvents and can be described as simple, cheap, sensitive, convenient, and environmentally friendly. It was successfully applied to the analysis of artificial mixtures and real samples, such as steel, dental alloy, rainwater, ampoules of vitamin B₁₂, and saline solution for intravenous infusion.     

Modelling and Optimization of Ultrasound-Assisted Extraction of Phenolic Compounds from Black Quinoa by Response Surface Methodology

Phenolic compounds are currently the most investigated class of functional components in quinoa. However, great variability in their content emerged, because of differences in sample intrinsic and extrinsic characteristics; processing-induced factors; as well as extraction procedures applied. This study aimed to optimize phenolic compound extraction conditions in black quinoa seeds by Response Surface Methodology. An ultrasound-assisted extraction was performed with two different mixtures; and the effect of time; temperature; and sample-to-solvent ratio on total phenolic content (TPC) was investigated. Data were fitted to a second-order polynomial model. Multiple regression analysis and analysis of variance were used to determine the fitness of the model and optimal conditions for TPC. Three-dimensional surface plots were generated from the mathematical models. TPC at optimal conditions was 280.25 ± 3.94 mg of Gallic Acid Equivalent (GAE) 100 g⁻¹ dm upon extraction with aqueous methanol/acetone, and 236.37 ± 5.26 mg GAE 100 g⁻¹ dm with aqueous ethanol mixture. The phenolic profile of extracts obtained at optimal conditions was also investigated by HPLC. The two extracting procedures did not show different specificities for phenolic compounds but differed in the extraction yield.     

Ultra-Thin Wrinkled Carbon Sheet as an Anode Material of High-Power-Density Potassium-Ion Batteries

Although K⁺ is readily inserted into graphite, the volume expansion of graphite of up to 60% upon the formation of KC₈, together with its slow diffusion kinetics, prevent graphite from being used as an anode for potassium-ion batteries (PIBs). Soft carbon with low crystallinity and an incompact carbon structure can overcome these shortcomings of graphite. Here, ultra-thin two-dimensional (2D) wrinkled soft carbon sheets (USCs) are demonstrated to have high specific capacity, excellent rate capability, and outstanding reversibility. The wrinkles themselves prevent the dense stacking of micron-sized sheets and provide sufficient space to accommodate the volume change of USCs during the insertion/extraction of K⁺. The ultra-thin property reduces strain during the formation of K-C compounds, and further maintains structural stability. The wrinkles and heteroatoms also introduce abundant edge defects that can provide more active sites and shorten the K⁺ migration distance, improving reaction kinetics. The optimized USC₂₀₋₁ electrode exhibits a reversible capacity of 151 mAh g⁻¹ even at 6400 mA g⁻¹, and excellent cyclic stability up to 2500 cycles at 1000 mA g⁻¹. Such comprehensive electrochemical performance will accelerate the adoption of PIBs in electrical energy applications.     

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (−110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•–)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II–(O₂^2–)–Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II–O–Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II−(O₂²⁻)−Mn^IV(TPP)−(O₂²⁻)−Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = −44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.     

Distribution coefficients of137Cs and85Sr by mixtures of clay and humic material

Distribution coefficients K_d for the sorption of Cs and Sr on mixtures of a clay mineral (Ca-saturated bentonite) and humic material (Ca-humate) have been measured and were compared with calculated values obtained from the K_d-values observed for the pure components. The concentration of Sr and Cs in the solution was varied between 1·10^–6 and 0.01N and the distribution of the elements determined by using radioactive tracers. All experiments were carried out in pure water as well as in the presence of a supporting electrolyte (0.01N CaCl₂). It was found that the differences between the observed and calculated K_d-values were, if present, always negative if Cs was sorbed, and positive if Sr was sorbed.     

Enthalpic and Liquid-Phase Adsorption Study of Toluene–Cyclohexane and Toluene–Hexane Binary Systems on Modified Activated Carbons

The liquid-phase adsorption of toluene in cyclohexane and hexane solutions on modified activated carbons was evaluated; the energy involved in the interaction between these solutions and the solids was determined by immersion enthalpies of pure solvents and their mixtures, and the contribution of the system constituents was calculated by differential enthalpies. The thermal treatment generated modifications that favored adsorption and interaction with the evaluated solutions, since it increased the textural parameters and the basic character of the samples. Cyclohexane could create greater competition with the adsorption sites compared to hexane, but it favored the increase in adsorption capacities (0.416 to 1.026 mmol g⁻¹) and the interactions with the solid evaluated through the immersion enthalpies. The immersion enthalpies of pure solvents (−16.36 to −112.7 J g⁻¹) and mixtures (−25.65 to −104.34 J g⁻¹) had exothermic behaviors that were decreasing due to the possible displacement of solvent molecules when increasing the solute concentration in the mixtures. The differential enthalpies for toluene were negative (−18.63 to −2.14 J), mainly due to the π–π interaction with the solid, while those of the solvent–solid component tended to be positive values (−4.25 to 55.97 J) due to the displacement of the solvent molecules by those of toluene.     

Influence of the physico-chemical properties of Selangor soil series on the distribution coefficient (<Emphasis Type="Italic">K</Emphasis><Subscript>d</Subscript>-value) of <Superscript>226</Superscript>Ra

²²⁶Ra is a member of the ²³⁸U natural decay series and is one of the most important isotope to be determined among the naturally occurring nuclides in environmental samples. In order to evaluate the radiation dose from ²²⁶Ra, it is important to know its mobility in different types of soils. The aim of the present study is to quantify the influence of physico-chemical soil properties on ²²⁶Ra adsorption. The distribution coefficients (K _d-value) of ²²⁶Ra in Selangor soil series samples were measured in one core, at three depth levels to evaluate the adsorbability of ²²⁶Ra. The soil samples were spiked with ²²⁶Ra tracer and the activities of ²²⁶Ra in the separated phase from batch sorption test were measured by a low background but high efficiency well-type HPGe detector. Several physico-chemical soil properties were also characterised for each soil samples. Pearson’s correlation and stepwise multiple regression test were applied at the 0.05 level of significance throughout all analysis to determine the relationships and influences between distribution coefficients (K _d-value) of ²²⁶Ra with physicochemical soil properties for the Selangor soil series. The observed K _d value was in the range of 50.55–172.28 mL g⁻¹ (mean: 93.20 ± 46.99 mL g⁻¹). The regression showed that the highest positive correlations were observed for organic matter (OM) and cation exchange capacity (CEC) (r = 0.96**, 0.81**, respectively) with K _d-values. The results indicate that the stepwise multiple regression model incorporating the soil’s OM and CEC accounts for 98% of the variability in distribution coefficients of ²²⁶Ra.     

Determination of Cd,Pb, and Cu in the Atmospheric Aerosol of Central East Antarctica at Dome C (Concordia Station)

Trace heavy metals Cd, Pb, and Cu were determined (by square wave anodic stripping voltammetry) in aerosol samples collected at Dome C (the Italo-French Station Concordia), a remote site of the Central East Antarctic plateau, for which no data are available until now. During the Austral Summer 2005–2006, three PM10 high-volume impactors were installed in two locations nearby of Concordia station: the first one very close and downwind of the station (about 50 m north), the other two (very close to each other) in a ‘distant’ site, upwind of the station and close to the astrophysics tent (not used in that expedition) at ~800 m south of Station Concordia. For each sample, the availability of the mass of the aerosol collected (obtained by differential weighing carried out on site), in addition to the volume of the filtered air, allowed us to express results both in terms of metal mass fractions in the aerosol and in the usual way of metal atmospheric concentrations. Metal contents increased in the order Cd < Pb < Cu with the following ranges of values: Cd 1.0–8.4 µg g⁻¹ (0.09–3.1 pg m⁻³), Pb 96–470 µg g⁻¹ (12–62 pg m⁻³), and Cu 0.17–20 mg g⁻¹ (0.027–2.4 ng m⁻³). From the metal temporal profiles obtained we estimated the following background values for the area of Dome C, expressed both in mass fractions and in atmospheric concentrations: Cd 1.2 ± 0.2 µg g⁻¹ (0.24 ± 0.13 pg m⁻³), Pb (here fixed as upper limit) 113 ± 13 µg g⁻¹ (21 ± 8 pg m⁻³), and Cu 0.91 ± 0.48 mg g⁻¹ (0.12 ± 0.07 ng m⁻³). The highest values were observed in the first part of the season, and particularly for the site close to the station, possibly related to sample contamination linked to intense activity at the Concordia station connected with the beginning of the expedition, including aircraft arrivals/departures. Increments of up to 10 times (and even 20 times for Cu) were recorded with respect to the background values. The metal excesses of the contaminated over background samples were found approximately, except for Cu, in the same proportion of the metal contents of the special Antarctic blend (SAB) diesel fuel, which is used almost exclusively at Concordia Station. The effect of the wind direction was also observed. Thus in the intermediate period of the campaign, when the wind direction reversed for several days with respect to the prevailing one, Cd and Pb metal contents decreased at the sampling point installed close to the station, now upwind of Concordia station, and increased at the ‘clean’ site astrophysics tent, turned downwind at the main station. No simple and easily interpretable effect of the wind direction was observed for Cu, which suggests that some other extemporaneous and not clearly identified factor may have intervened in this case. These results suggest that the human impact at Dome C influences mainly the zone very close to the station, but also the area in the neighborhood, including the supposed clean site of the astrophysics tent (about 800 m far from the station), when the wind direction reverses with respect to the prevailing one, leaving the site downwind of the station Concordia. Since no other data are reported for the Dome C area, our results are compared with literature data referred to the South Pole Station (the only other plateau site for which data are available) and several other coastal Antarctic sites, observing that our results (excluding Cu) are the lowest ever observed for Antarctic aerosol.     

Realizing high hydrogen evolution activity under visible light using narrow band gap organic photocatalysts

The design and synthesis of conjugated semiconducting polymers for photocatalytic hydrogen evolution have engendered intense recent interest. However, most reported organic polymer photocatalysts show a relatively broad band gap with weak light absorption ability in the visible light region, which commonly leads to a low photocatalytic activity under visible light. Herein, we synthesize three novel dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide (DTDO) containing conjugated polymer photocatalysts by a facile C–H arylation coupling polymerization reaction. The resulting polymers show a broad visible light absorption range up to 700 nm and a narrow band gap down to 1.81 eV due to the introduction of the DTDO unit. Benefiting from the donor–acceptor polymer structure and the high content of the DTDO unit, the three-dimensional polymer PyDTDO-3 without the addition of a Pt co-catalyst shows an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation, which is much higher than that of most reported organic polymer photocatalysts under visible light.

Narrow band gap conjugated polymer photocatalysts containing dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide show an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation.     

Mitigation of Jahn–Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution

Layered manganese-based oxides are promising candidates as cathode materials for sodium-ion batteries (SIBs) due to their low cost and high specific capacity. However, the Jahn–Teller distortion from high-spin Mn³⁺ induces detrimental lattice strain and severe structural degradation during sodiation and desodiation. Herein, lithium is introduced to partially substitute manganese ions to form distorted P′2-Na_0.67Li_0.05Mn_0.95O₂, which leads to restrained anisotropic change of Mn–O bond lengths and reinforced bond strength in the [MnO₆] octahedra by mitigation of Jahn–Teller distortion and contraction of MnO₂ layers. This ensures the structural stability during charge and discharge of P′2-Na_0.67Li_0.05Mn_0.95O₂ and Na⁺/vacancy disordering for facile Na⁺ diffusion in the Na layers with a low activation energy barrier of ∼0.53 eV. It exhibits a high specific capacity of 192.2 mA h g⁻¹, good cycling stability (90.3% capacity retention after 100 cycles) and superior rate capability (118.5 mA h g⁻¹ at 1.0 A g⁻¹), as well as smooth charge/discharge profiles. This strategy is effective to tune the crystal structure of layered oxide cathodes for SIBs with high performance.

Li-Substitution in P′2-Na_0.67MnO₂ mitigates the anisotropic change of Mn–O bonds and Na/vacancy ordering, and hence significantly promotes its cycling stability and rate capability as a cathode material for sodium-ion batteries.     

Spectrophotometric Determination of Molybdenum(VI) as a Ternary Complex with 4-Nitrocatechol and Benzalkonium Chloride

A new liquid—liquid extraction system for molybdenum(VI) was studied. It contains 4-nitrocatechol (4NC) as a complexing chromogenic reagent and benzalkonium chloride (BZC) as a source of heavy cations (BZ⁺), which are prone to form chloroform-extractable ion-association complexes. The optimum conditions for the determination of trace molybdenum(VI) were found: concentrations of 4NC and BZC (7.5 × 10⁻⁴ mol dm⁻³ and 1.9 × 10⁻⁴ mol dm⁻³, respectively), acidity (3.75 × 10⁻² mol dm⁻³ H₂SO₄), extraction time (3 min), and wavelength (439 nm). The molar absorptivity, limit of detection, and linear working range were 5.5 × 10⁴ dm³ mol⁻¹ cm⁻¹, 5.6 ng cm⁻³, and 18.6–3100 μg cm⁻³, respectively. The effect of foreign ions was examined, and the developed procedure was applied to the analysis of synthetic mixtures and real samples (potable waters and steels). The composition of the extracted complex was 1:1:2 (Mo:4NC:BZ). Three possible structures of its anionic part [Mo^VI(4NC)O₂(OH)₂]²⁻ were discussed based on optimizations at the B3LYP/3-21G level of theory, and simulated UV/Vis absorption spectra were obtained with the TD Hamiltonian.     

Computational Studies of Coinage Metal Anion M− + CH3X (X = F,Cl, Br,I) Reactions in Gas Phase

We characterized the stationary points along the nucleophilic substitution (S_N2), oxidative insertion (OI), halogen abstraction (XA), and proton transfer (PT) product channels of M⁻ + CH₃X (M = Cu, Ag, Au; X = F, Cl, Br, I) reactions using the CCSD(T)/aug-cc-pVTZ level of theory. In general, the reaction energies follow the order of PT > XA > S_N2 > OI. The OI channel that results in oxidative insertion complex [CH₃–M–X]⁻ is most exothermic, and can be formed through a front-side attack of M on the C-X bond via a high transition state OxTS or through a S_N2-mediated halogen rearrangement path via a much lower transition state invTS. The order of OxTS > invTS is inverted when changing M⁻ to Pd, a d¹⁰ metal, because the symmetry of their HOMO orbital is different. The back-side attack S_N2 pathway proceeds via typical Walden-inversion transition state that connects to pre- and post-reaction complexes. For X = Cl/Br/I, the invS_N2-TS’s are, in general, submerged. The shape of this M⁻ + CH₃X S_N2 PES is flatter as compared to that of a main-group base like F⁻ + CH₃X, whose PES has a double-well shape. When X = Br/I, a linear halogen-bonded complex [CH₃−X∙··M]⁻ can be formed as an intermediate upon the front-side attachment of M on the halogen atom X, and it either dissociates to CH₃ + MX⁻ through halogen abstraction or bends the C-X-M angle to continue the back-side S_N2 path. Natural bond orbital analysis shows a polar covalent M−X bond is formed within oxidative insertion complex [CH₃–M–X]⁻, whereas a noncovalent M–X halogen-bond interaction exists for the [CH₃–X∙··M]⁻ complex. This work explores competing channels of the M⁻ + CH₃X reaction in the gas phase and the potential energy surface is useful in understanding the dynamic behavior of the title and analogous reactions.     

Determination of biocides in different environmental matrices by use of ultra-high-performance liquid chromatography–tandem mass spectrometry

A sensitive and robust method using solid-phase extraction and ultrasonic extraction for preconcentration followed by ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS–MS) has been developed for determination of 19 biocides: eight azole fungicides (climbazole, clotrimazole, ketoconazole, miconazole, fluconazole, itraconazole, thiabendazole, and carbendazim), two insect repellents (N,N-diethyl-3-methylbenzamide (DEET), and icaridin (also known as picaridin)), three isothiazolinone antifouling agents (1,2-benzisothiazolinone (BIT), 2-n-octyl-4-isothiazolinone (OIT), and 4,5-dichloro-2-n-octyl-isothiazolinone (DCOIT)), four paraben preservatives (methylparaben, ethylparaben, propylparaben, and butylparaben), and two disinfectants (triclosan and triclocarban) in surface water, wastewater, sediment, sludge, and soil. Recovery of the target compounds from surface water, influent, effluent, sediment, sludge, and soil was mostly in the range 70–120?%, with corresponding method quantification limits ranging from 0.01 to 0.31?ng?L^?1, 0.07 to 7.48?ng?L^?1, 0.01 to 3.90?ng?L^?1, 0.01 to 0.45?ng?g^?1, 0.01 to 6.37?ng?g^?1, and 0.01 to 0.73?ng?g^?1, respectively. Carbendazim, climbazole, clotrimazole, methylparaben, miconazole, triclocarban, and triclosan were detected at low ng?L^?1 (or ng?g^?1) levels in surface water, sediment, and sludge-amended soil. Fifteen target compounds were found in influent samples, at concentrations ranging between 0.4 (thiabendazole) and 372?ng?L^?1 (methylparaben). Fifteen target compounds were found in effluent samples, at concentrations ranging between 0.4 (thiabendazole) and 114?ng?L^?1 (carbendazim). Ten target compounds were found in dewatered sludge samples, at concentrations ranging between 1.1 (DEET) and 887?ng?g^?1 (triclocarban).     

Uptake of Pharmaceutical Pollutants and Their Metabolites from Soil Fertilized with Manure to Parsley Tissues

Manure is a major source of soil and plant contamination with veterinary drugs residues. The aim of this study was to evaluate the uptake of 14 veterinary pharmaceuticals by parsley from soil fertilized with manure. Pharmaceutical content was determined in roots and leaves. Liquid chromatography coupled with tandem mass spectrometry was used for targeted analysis. Screening analysis was performed to identify transformation products in the parsley tissues. A solid-liquid extraction procedure was developed combined with solid-phase extraction, providing recoveries of 61.9–97.1% for leaves and 51.7–95.6% for roots. Four analytes were detected in parsley: enrofloxacin, tylosin, sulfamethoxazole, and doxycycline. Enrofloxacin was detected at the highest concentrations (13.4–26.3 ng g⁻¹). Doxycycline accumulated mainly in the roots, tylosin in the leaves, and sulfamethoxazole was found in both tissues. 14 transformation products were identified and their distribution were determined. This study provides important data on the uptake and transformation of pharmaceuticals in plant tissues.     

Mixed-Valent Trinuclear CoIII-CoII-CoIII Complex with 1,3-Bis(5-chlorosalicylideneamino)-2-propanol

A mixed-valent trinuclear complex with 1,3-bis(5-chlorosalicylideneamino)-2-propanol (H₃clsalpr) was synthesized, and the crystal structure was determined by the single-crystal X-ray diffraction method at 90 K. The molecule is a trinuclear Co^III-Co^II-Co^III complex with octahedral geometries, having a tetradentate chelate of the Schiff-base ligand, bridging acetate, monodentate acetate coordination to each terminal Co³⁺ ion and four bridging phenoxido-oxygen of two Schiff-base ligands, and two bridging acetate-oxygen atoms for the central Co²⁺ ion. The electronic spectral feature is consistent with the mixed valent Co^III-Co^II-Co^III. Variable-temperature magnetic susceptibility data could be analyzed by consideration of the axial distortion of the central Co²⁺ ion with the parameters Δ = –254 cm⁻¹, λ = –58 cm⁻¹, κ = 0.93, tip = 0.00436 cm³ mol⁻¹, θ = –0.469 K, g_z = 6.90, and g_x = 2.64, in accordance with a large anisotropy. The cyclic voltammogram showed an irreversible reduction wave at approximately −1.2 V·vs. Fc/Fc⁺, assignable to the reduction of the terminal Co³⁺ ions.