Synthesis,characterization and release profiles of nanoparticles self‐assembled from poly (PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers

A novel amphiphilic copolymer was synthesized from poly (ethylene glycol) methyl ether methacrylate (PEGMA950), methyl methacrylate (MMA) and acryloyl‐β‐cyclodextrin (acryloyl‐β‐CD) using the composites of (NH₄)₂S₂O₈/NaHSO₃ as the oxidation–reduction initiators. The successful fabrication of poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers was confirmed by Fourier transform infrared spectrometer (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR) spectra. The amphiphilic copolymer could self‐assemble into nanoparticles (NPs), and their morphology and particle size distribution were characterized with transmission electron microscopy (TEM), atomic force microscope (AFM) and dynamic light scattering (DLS) methods. Ibuprofen (IBU) was encapsulated in the novel NPs, and the release profiles of IBU were investigated. FTIR and ¹H NMR spectra illustrated that the poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers were synthesized without any residual monomers and initiators. TEM and AFM photographs suggested that the obtained NPs were spherical, and the DLS results indicated that the diameter of blank NPs was 157.3 ± 32.7 nm. The IBU release profile showed that the IBU‐loaded NPs had certain pH responsibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation and characterization of poly(ethylene oxide)‐loaded hydroxypropyl‐β‐cyclodextrin nanofibers

Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) is a modified β‐cyclodextrin (β‐CD) derivative, which is toxicologically harmless to mammals and other animals. HP‐β‐CD is electrospun from an aqueous solution by blending with a non‐toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). Aqueous solutions containing different HP‐β‐CD/PEO blends (50:50–80:20) with variable concentrations (4 wt%–12 wt%) were used. Scanning electron microscope was used to investigate the morphology of the fibers, and Fourier transform infrared spectroscopy analysis confirmed the presence of HP‐β‐CD in the fiber. Uniform nanofibers with an average diameter of 264, 244, and 236 nm were obtained from 8 wt% solution of 50:50, 60:40, and 70:30 HP‐β‐CD/PEO, respectively. The average diameter of the fiber was decreased with increasing of HP‐β‐CD/PEO ratio. However, a higher proportion of HP‐β‐CD in the spinning solution increased beads in the fibers. The polymer concentration had no significant effect on the fiber diameter. The most uniform fibers with the narrowest diameter distribution were obtained from the 8 wt% of 50:50 solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Ultrasound‐assisted green synthesis of Cu‐based complexes of β‐cyclodextrin and their SOD‐like activity

A novel Cu–Zn β‐cyclodextrin (CuZn/β‐CD) model compound was synthesized under ultrasound irradiation to mimic the functionality of copper zinc superoxide dismutase (CuZnSOD). For comparison, Cu/β‐CD and Zn/β‐CD complexes were also synthesized via a sonochemical approach. The obtained complexes were characterized by FTIR, ICP‐OES, UV–vis and Scanning electron microscopy‐Energy dispersive X‐ray (SEM‐EDX) techniques. The SOD activity of the complexes was evaluated by a pyrogallol autoxidation method. These enzyme‐mimetic materials scavenge ambient free radicals, with the potential to provide significant antioxidant protection (scavenging ability > 70%).     

Morphology and dynamics of the poly(ϵ‐caprolactone)‐b‐poly(L‐lactide) diblock copolymer and its inclusion compound with α‐cyclodextrin: A solid‐state 13C NMR study

A biodegradable diblock copolymer of poly(ϵ‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA) was synthesized and characterized. The inclusion compound (IC) of this copolymer with α‐cyclodextrin (α‐CD) was formed and characterized. Wide‐angle X‐ray diffraction showed that in the IC crystals α‐CDs were packed in the channel mode, which isolated and restricted the individual guest copolymer chains to highly extended conformation. Solid‐state ¹³C NMR techniques were used to investigate the morphology and dynamics of both the bulk and α‐CD‐IC isolated PCL‐b‐PLLA chains. The conformation of the PCL blocks isolated within the α‐CD cavities was similar to the crystalline conformation of PCL blocks in the bulk copolymer. Spin–lattice relaxation time (T₁C) measurements revealed a dramatic difference in the mobilities of the semicrystalline bulk copolymer chains and those isolated in the α‐CD‐IC channels. Carbon‐observed proton spin–lattice relaxation in the rotating frame measurements (T_1ρH) showed that the bulk copolymer was phase‐separated, while, in the IC, exchange of proton magnetization through spin‐diffusion between the isolated guest polymer chains and the host α‐CD was not complete. The two‐dimensional solid‐state heteronuclear correlation (HetCor) method was also employed to monitor proton communication in these samples. Intrablock exchange of proton magnetization was observed in both the bulk semicrystalline and IC copolymer samples at short mixing times; however, even at the longest mixing time, interblock proton communication was not observed in either sample. In spite of the physical closeness between the isolated included guest chains and the host α‐CD molecules, efficient proton spin diffusion was not observed between them in the IC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2086–2096, 2005     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

Synthesis and characterization of polypyrrole nanofibers with different dopants

Nanostructures of polypyrrole (PPy) were synthesized in the presence of different dopants including hydrochloric acid (HCl), ferric chloride (FeCl₃), p‐toluene sulfonic acid (p‐TSA), camphor sulfonic acid (CSA), and polystyrene sulfonic acid (PSSA), using a simple interfacial oxidative polymerization method. The method is a reliable non‐template approach with relatively simple instrumentation, ease of synthesis, and economic viability for synthesizing PPy nanostructures. Morphology of synthesized PPy structures was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which indicate the formation of one‐dimensional (1D) nanofibers with average diameter of 75–180 nm. Energy dispersive spectrum (EDS) of the PPy nanofibers indicates the attachment of the dopants to the PPy backbone; the fact is further confirmed by the Fourier transform infrared (FTIR) spectra of PPy nanostructures. Thermal stabilities of the nanostructures explored using thermal gravimetric analysis (TGA) follow the order PPy‐p‐TSA > CSA > HCl > FeCl₃ > PSSA. It is noticed that the electrical conductivity (EC) of PPy nanostructures depends upon the nature of dopant (PPy‐p‐TSA > CSA > HCl > FeCl₃ > PSSA), PPy‐p‐TSA nanofibers showing the highest EC of 6 × 10^?2 Scm^?1. Copyright © 2009 John Wiley & Sons, Ltd.     

Structure and Photochemical Behavior of the Cyclodextrin Inclusion Complexes of the Benzoylthiophene‐Derived Drugs Tiaprofenic Acid (=5‐Benzoyl‐α‐methylthiophene‐2‐acetic Acid) and Suprofen (=α‐Methyl‐4‐(2‐thienylcarbonyl)benzeneacetic Acid)

The effect of β‐cyclodextrin (β‐CD) on the excited‐state reactivity of the two benzoylthiophene derivatives, tiaprofenic acid (TPA; 2 ) and suprofen (SPF; 3 ) in their carboxylate forms is studied. The presence of β‐cyclodextrin does not affect the nature of the photoproduced transients and the photoproducts, but increases the photodegradation quantum yields of both drugs. The efficiency of the photodecarboxylation process is enhanced. This effect is rationalized in the light of the inclusion of 2 and 3 in the β‐CD cavity, affecting the energy of the lowest excited states of the drugs. The structure of the complexes is determined by induced circular dichroism, and molecular‐mechanics and dynamic Monte Carlo calculations. The photoreactivity of the decarboxylated photoproduct 7 of tiaprofenic acid ( 2 ) in presence of β‐CD is also examined.     

Synthesis of β3‐Peptides and Mixed α/β3‐Peptides by Thioligation

Five β‐peptide thioesters ( 1 – 5 , containing 3, 4, 10 residues) were prepared by manual solid‐phase synthesis and purified by reverse‐phase preparative HPLC. A β‐undecapeptide ( 6 ) and an α‐undecapeptide ( 7 ) with N‐terminal β³‐HCys and Cys residues were prepared by manual and machine synthesis, respectively. Coupling of the thioesters with the cysteine derivatives in the presence of PhSH (Scheme and Fig. 1) in aqueous solution occurred smoothly and quantitatively. Pentadeca‐ and heneicosapeptides ( 8 – 10 ) were isolated, after preparative RP‐HPLC purification, in yields of up to 60%. Thus, the so‐called native chemical ligation works well with β‐peptides, producing larger β³‐ and α/β³‐mixed peptides. Compounds 1 – 10 were characterized by high‐resolution mass spectrometry (HR‐MS) and by CD spectroscopy, including temperature and concentration dependence. β‐Peptide 9 with 21 residues shows an intense negative Cotton effect near 210 nm but no zero‐crossing above 190 nm, (Figs. 2–4), which is characteristic of β‐peptidic 3₁₄‐helical structures. Comparison of the CD spectra of the mixed α/β‐pentadecapeptide ( 10 ) and a helical α‐peptide (Fig. 5) indicate the presence of an α‐peptidic 3.6₁₃ helix.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

羟丙基-β-环糊精磁性复合微粒的合成及作为阿霉素载体的体外释药研究

羟丙基-β-环糊精因具有内部疏水和外部亲水锥形圆筒空腔结构和良好的生物相容性在磁性药物载体方面有潜在应用价值。本研究将羟丙基-β-环糊精修饰在超顺磁性纳米四氧化三铁粒子表面制备磁性复合微粒,用红外光谱,透射电镜,振动磁强计,电感耦合等离子发射等方法对该复合微粒进行了表征,并将其用于抗肿瘤药物阿霉素的体外载药与释药实验研究。结果表明该复合微粒的粒径大小在10-20nm,饱和磁化强度59.9 emu/g,铁含量55.4%。对阿霉素的载药量为87.8 μg/mg。体外释药结果显示载药复合粒子在PBS中1天,4天,10天的累积释药量分别为35.5%, 49.3%, 76.5%,表明该载体具有一定的药物缓释功能。由此可知,羟丙基-β-环糊精磁性复合微粒可作为磁性靶向给药系统的有效载体。     

Capillary electrophoretic separation and computational modeling of inclusion complexes of β‐cyclodextrin and 18‐crown‐6 ether with primaquine and quinocide

The antimalarial drug primaquine (PQ) and its contaminant, the positional isomer quinocide (QC) have been successfully separated using capillary electrophoresis with either β‐cyclodextrin (β‐CD) or 18‐crown‐6 ether (18C6) as chiral mobile phase additive. The interactions of the drugs with cyclodextrins and 18C6 were studied by the semiempirical method (Parametric Model 3) PM3. Theoretical calculations for the inclusion complexes of PQ and QC with α‐CD, β‐CD and 18C6 were performed. Data from the theoretical calculations are correlated and discussed with respect to the electrophoretic migration behavior. More stable complexes are predicted for the PQ–β‐CD and PQ–18C6 complexes. The coelution of PQ and QC when α‐CD was used as buffer additive can be explained by their comparable stabilities of the inclusion complex formed, while significant differences in the complexation stabilities of the drugs with β‐CD is responsible for their separation. The stronger hydrogen bonding in PQ–18C6 system is responsible for the separation between PQ and QC when 18C6 was used as chiral mobile phase additive. Copyright © 2009 John Wiley & Sons, Ltd.     

Hyperbranched Polyamidoamines Containing β‐Cyclodextrin for Controlled Release of Chlorambucil

This work is focused on the controlled drug release behavior of hyperbranched HPMA in the presence of β‐CD. Hence, three HPMA‐β‐CDs and a pure HPMA were synthesized by Michael addition polymerization. As a model drug, CLB (an anti‐cancer drug) was loaded into them via a solution method for in vitro release studies. The DSC results indicate that the CLB/polymer interactions are at the molecular level. Loading CLB into these polymers results in an evident increase in their glass transition temperatures, and ΔT_g depends on the β‐CD content. The controlled‐release experiments show that the presence of β‐CD can appropriately slow the release of CLB from HPMA‐β‐CDs and adjust the ratio of CLB released in total drug loading.

     

β‐Cyclodextrin Pseudopolyrotaxanes with π‐Conjugated Polymer Axles

Summary: β‐Cyclodextrin (β‐CD) pseudopolyrotaxanes containing poly(thiophene‐2,5‐diyl), PTh , or poly(3‐methylthiophene‐2,5‐diyl)s, P3MeTh s, as an axle were prepared. Structures of the pseudopolyrotaxanes and their inclusion behavior with β‐CD were investigated. The UV‐vis measurements revealed that inclusion of P3MeTh s by β‐CD depended on the flexibility of the main chain and their molecular weight.

Formation of the inclusion complex of β‐CD and PTh .     

pH‐triggerable and ultraviolet‐triggerable β‐cyclodextrin microgel

β‐Cyclodextrin (βCD) microgels were prepared water in oil emulsion, and cinnamic acid (CA) was loaded in the microgel by inclusion complexation. The specific loading of CA in the microgel was 0.0203 mg/mg, and it was less than that the calculated specific loading (0.0368 mg/mg). The maximum swelling ratio of CA‐loaded βCD microgel (CAβCD microgel) decreased from 233.9% to 225.7% upon the irradiation of ultraviolet light (λ = 365 nm). And the 5(6)‐carboxyfluorescein release of CAβCD microgel, observed for 12 h, was suppressed upon the irradiation of ultraviolet light, possibly because the microgel can be photocross‐linked, and its mass transfer resistance against dye diffusion would increase. The swelling ratio of CAβCD microgel somewhat depended on the pH value of the medium, possibly because electrostatic repulsion can be developed within the microgel by the ionizable carboxylic group of CA. The 5(6)‐carboxyfluorescein release degree in 12 h of CAβCD microgel increased from 10.5% to 85.1% when the pH value increased from 3.0 to pH 9.0. This is mainly because CA is more soluble at a higher pH value. In the full range of pH value tested, the release degrees of CAβCD microgel were slightly higher than those of βCD microgel, possibly because of the electrostatic repulsion developed within the CAβCD microgel. Copyright © 2014 John Wiley & Sons, Ltd.     

Automated Solid‐Phase Synthesis and Structural Investigation of β‐Peptidosulfonamides and β‐Peptidosulfonamide/β‐Peptide Hybrids: β‐Peptidosulfonamide and β‐Peptide Foldamers are Two of a Different Kind

Fmoc‐protected β‐aminoethane sulfonylchlorides can be employed for efficient automated solid phase synthesis of β‐peptidosulfonamides and β‐peptidosulfonamide/β‐peptide hybrids containing one or more β‐peptidosulfonamide residues. Thus, Fmoc‐protected β‐aminoethane sulfonylchlorides 5a – c led to the hexa‐β‐peptidosulfonamide 9 and the nona‐β‐peptidosulfonamide 10 . In addition, the β‐peptidosulfonamide/β‐peptide hybrids 13 and 16 , consisting of six and nine β‐residues, respectively, and containing a single β‐peptidosulfonamide unit in the middle, as well as the peptidosulfonamide/β‐peptide hybrid 15 with nine β‐residues, including an N‐terminal β‐peptidosulfonamide residue, were synthesized by automated solid‐phase synthesis. Both CD and NMR spectroscopic measurements did not indicate any helical secondary structure for 9 and 10 . As was shown by CD‐measurements, the β‐peptidosulfonamide residue in the hybrids 13, 15 , and 16 acts as a ‘helix breaker', especially when located in the middle of the hybrid chain ( 13 and 16 ), but, although to a lesser extent, also at the N‐terminus.     

Synthesis and characterization of poly (indene‐co‐pyrrole) nanofibers

Nanofibers of poly (indene‐co‐pyrrole) (CInPy) have been synthesized, using a facile chemical oxidative polymerization reaction. The effect of copolymerization was examined in view of the individually synthesized homopolymer nanostructures of polyindene (PIn) and polypyrrole (PPy). Morphological details of CInPy, studied using scanning electron microscopy (SEM) and transmission electron microscopy, (TEM) reveal the appearance of dense cottony mess, comprising of fine fibers with an average diameter of 5–10 nm. Chemical structural analysis of CInPy, conducted using ultraviolet‐visible (UV‐Vis), Fourier transform infrared (FTIR), and nuclear magnetic resonance (NMR) spectroscopic techniques, reveals that both PIn and PPy are involved in the formation of copolymer organization. Fluorescence properties of nanosized copolymer are observed in the blue region, with emission λ_max placed at 395 nm. Conductivity of copolymer nanofibers (2.4 × 10^?3 S/cm) is consistent with the morphology and thermal stability properties of integral homo‐polymers. Improved thermal stability and processability along with the enhanced optical and electrical properties of copolymer nanostructures outfit it as a better promising material in optoelectronic and light emitting nanodevices, with reference to nanosized PIn and PPy. Copyright © 2009 John Wiley & Sons, Ltd.     

Cyclodextrins in Polymer Synthesis: Photoinitiated Free‐Radical Polymerization of N‐Isopropylacrylamide in Water Initiated by a Methylated β‐Cyclodextrin/2‐Hydroxy‐2‐methyl‐1‐phenylpropan‐1‐one Host/Guest Complex

Methylated β‐cyclodextrin (Me‐β‐CD) was used to complex a free‐radical photoinitiator, 2‐hydroxy‐2‐methyl‐1‐phenylpropan‐1‐one ( 1 ), yielding the water‐soluble 1 : 1 host/guest complex 1 a . The structure of complex 1 a was verified by means of IR, UV/vis and ¹H NMR spectroscopy. The influence of Me‐β‐CD as the host on the photopolymerization kinetics of N‐isopropylacrylamide was studied. Compared to the photopolymerization carried out under nearly identical conditions but without cyclodextrin, an increase in the polymerization rate was registered in the presence of complex 1 a .     

Two—dimensional Network Crown Ether Complex.Synthesis and Crystal Structure of 18—Crown—6 Complex：[K（18—C—6）]2[Cd—（nmt）2]

The novel complex [K(18-C-6)]2[Cd(mnt)2][18-C-6-18-crown-6,nmt=1,2-dicyanoethene-1,2-dithiolate,C2S2-(CN)2^2-] was synthesized and characterized by elemental analysis,IR spectrum and X-ray diffraction analysis.The complex displays two-dimensional network structure of [K(18-C-6)] complex segments and [Cd(nmt)2] complex segment bridged by S-K-S,S-K-N and N-K-N interactions between adjacent[K(18-C-6)] and [Cd(mnt)2]units.     

Synthesis of Novel Bis(β‐cyclodextrin)s Linked with Glycol and Their Inclusion Complexation with Organic Dyes

Three novel bis(β‐cyclodextrin (CD))s with flexible glycol linkers, i.e., ethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 2 ), diethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 3 ), and triethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 4 ) have been synthesized by the reaction of mono[6‐O‐(p‐toluenesulfonyl)]‐β‐CD with corresponding materials. The inclusion complexation behaviors of these compounds 2 – 4 with organic dyes; that is, acridine red (=N‐[(3Z)‐6‐(methylamino)‐3H‐xanthen‐3‐ylidene]methanaminium chloride; AR), neutral red (=N⁸,N⁸,3‐trimethylphenazine‐2,8‐diamine hydrochloride; NR), ammonium 8‐anilinonaphthalene‐1‐sulfonate (ANS), sodium 6‐(p‐toluidinyl)‐naphthalene‐2‐sulfonate (TNS), rhodamine B (RhB) and brilliant green (=N‐(4‐{[4‐(diethylamino)cyclohexa‐2,5‐dien‐1‐yl](phenyl)methyl}cyclohex‐2‐en‐1‐ylidene)‐N‐ethyl‐ethanaminium hydrogen sulfate; BG), have been investigated at 25° in phosphate buffer (pH 7.20) by ultraviolet, fluorescence, and 2D‐NMR spectroscopy. The results indicate that the two linked CD units may cooperatively bind a guest, and the molecular binding ability toward dye guests, especially bent ANS, T‐shaped RhB, and triangular BG, can be extended. This cooperative binding mode is confirmed by Job's experiments and 2D‐NMR investigations. Furthermore, the complex stability depends greatly on the linker length of these glycol‐bridged bis(β‐CD)s and the size and shape of guest. The higher binding ability and selectivity of dye molecules by bis(β‐CD)s 2 – 4 are discussed from the viewpoint of size/shape‐fit concept and multiple recognition mechanism.