Electrochemical Properties of a Boron‐Doped Diamond Electrode Modified with Gold/Polyelectrolyte Hollow Spheres

Oppositely charged polyelectrolyte (poly(allyamine hydrochloride) (PAH) and poly(sodium 4‐styrene‐sulfonate) (PSS)), and negatively charged gold nanoparticles (Au) were assembled alternately on polystyrene (PS) spheres via layer‐by‐layer technique, and the different PAH/(PSS/PAH)_n/(Au/PAH)_m/Au composite hollow spheres were derived by dissolving PS core. These hollow spheres were used to modify boron‐doped diamond (BDD) electrodes for electrochemical sensors. The cyclic voltammetric results for dopamine (DA) detection demonstrated that hollow‐sphere‐modified BDD exhibited better electrocatalytic activity than did bare BDD. Influence of the wall thickness and composition of hollow spheres on electrochemical properties were investigated. The results showed that the oxidative peak potential of DA and the peak current varied with different PSS/PAH and Au/PAH layers. The optimized wall structure of hollows spheres was PAH/(PSS/PAH)₇/(Au/PAH)₅/Au.     

Polyelectrolyte microcapsules templated on poly(styrene sulfonate)-doped CaCO3 particles for loading and sustained release of daunorubicin and doxorubicin

A strategy to incorporate and release anti-cancer drugs of daunorubicin (DNR) and doxorubicin (DOX) in preformed microcapsules is introduced, which is based on charge interaction mechanism. Oppositely charged poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were assembled onto PSS doped-CaCO₃ colloidal particles in a layer-by-layer manner to yield core-shell particles. After removal of the carbonate cores, hollow microcapsules with entrapped PSS were fabricated, which showed spontaneous loading ability of positively charged DNR and DOX. The drug loading was confirmed quantitatively by observations under confocal laser scanning microscopy, transmission electron microscopy and scanning force microscopy. Quantification of the drug loading was performed under different conditions, revealing that a larger amount of drugs could be incorporated at higher drug feeding concentrations and higher salt concentrations. However, putting additional polyelectrolyte layers on the microcapsules after core removal resulted in weaker drug loading efficiency. The drug release behaviors from the microcapsules with different layer numbers were studied too, revealing a diffusion controlled release mechanism at the initial stage (4 h).     

Hollow Multilayer Microcapsules for pH‐/Thermally Responsive Drug Delivery using Aliphatic Poly(urethane‐amine) as Smart Component

Hollow multilayer microcapsules made of aliphatic poly(urethane‐amine) (PUA) and sodium poly(styrene sulfonate) (PSS), templated on PSS‐doped CaCO₃ particles, are prepared for pH‐/thermally responsive drug delivery. The electrostatic interaction and hydrogen bonding under weak‐acid conditions between aliphatic PUA and PSS contribute to the formation of multilayer microcapsules. Scanning electron microscopy (SEM) results demonstrate an obvious variation of the hollow multilayer microcapsules in response to changes in temperature and pH value. Drug‐release behaviors using DOX as a model drug demonstrate that the drug release increases on decreasing the pH value because of the interaction weakness between aliphatic PUA and PSS in acidic conditions. Moreover, the drug release is higher at 55 °C than that at 37 °C for the sake of the shrinkage of aliphatic PUA above its lower critical solution temperature (LCST).

     

Robust Poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) Particles Prepared by Physical Crosslinking with Poly(styrene sulfonate)

Summary: Robust thermosensitive PAH‐g‐PNIPAAm/PSS particles were prepared by addition of a poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) particle suspension into poly(styrene sulfonate) solution above the LCST of PAH‐g‐PNIPAAm. Scanning force microscopy revealed stable and well‐separated particles in water at room temperature. The zeta‐potential showed a negative surface charge of the particles. Their thermosensitive behavior was demonstrated by dynamic light scattering. The release of rhodamine 6G loaded particles could respond to the incubation temperature.

Fabrication of thermosensitive and robust particle by suspension of in situ formed PAH‐g‐PNIPAAm particle above the LCST in PSS solution.     

Single Polyelectrolyte Microcapsules Fabricated By Glutaraldehyde‐Mediated Covalent Layer‐By‐Layer Assembly

Summary: Single polyelectrolyte component microcapsules and multilayers, exemplified by poly(allylamine hydrochloride) (PAH), have been prepared using a method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly. The GA cross‐linking of the adsorbed PAH results in surfaces covered by reactive aldehyde groups, which can then react with PAH to result in another layer of covalently linked PAH. The repeated assembly of single polyelectrolyte in an LbL manner can be thus achieved. The PAH multilayers can grow linearly along with the layer number, and their thickness can be controlled at the nanometer scale, as verified by UV‐vis absorption spectrometry and ellipsometry. Single polyelectrolyte microcapsules are obtained after removal of the template cores at low pH. The morphology and integrity are confirmed by scanning force microscopy and confocal laser scanning microscopy.

Schematic illustration of the preparation of a single polyelectrolyte component microcapsule by GA‐mediated covalent LbL assembly.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Reversible polyelectrolyte capsules as carriers for protein delivery

A reversible drug delivery system based on spontaneous deposition of a model protein into preformed microcapsules has been demonstrated for protein delivery applications. Layer-by-Layer assembly of poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) onto polystyrene sulfonate (PSS) doped CaCO₃ particles, followed by core removal yielded intact hollow microcapsules having a unique property to induce spontaneous deposition of bovine serum albumin (BSA) at pH below its isoelectric point of 4.8, where it was positively charged. These capsules showed reversible pH dependent open and closed states to fluorescence labeled dextran (FITC-Dextran) and BSA (FITC-BSA). The loading capacity of BSA increased from 9.1 × 10⁷ to 2.03 × 10⁸ molecules per capsule with decrease in pH from 4.5 to 3. The loading of BSA-FITC was observed by confocal laser scanning microscopy (CLSM), which showed homogeneous distribution of protein inside the capsule. Efficient loading of BSA was further confirmed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The interior capsule concentration was as high as 209 times the feeding concentration when the feeding concentration was increased from 1 to 10 mg/ml. The deposition was initially controlled by spontaneous loading mechanism at lower BSA concentration followed by diffusion controlled loading at higher concentration; which decreased the loading efficiency from 35% to 7%. Circular dichroism (CD) measurements and Fourier transform infrared spectroscopy (FTIR) confirmed that there was no significant change in conformation of released BSA in comparison with native BSA. The release was initially burst in the first 0.5 h and sustained up to 5 h. The hollow capsules were found to be biocompatible with mouse embryonic fibroblast (MEF) cells during in vitro cell culture studies. Thus these pH sensitive polyelectrolyte microcapsules may offer a promising delivery system for water soluble proteins and peptides.     

Polyphosphazene Microcapsules Fabricated through Covalent Assembly

Hollow polyphosphazene microcapsules have been fabricated by the covalent layer‐by‐layer assembly of polydichlorophosphazene (PDCP) and hexamethylenediamine (HDA) on aminosilanized silica particles, followed by core removal in a HF/NH₄F solution. The hollow and intact microcapsules in both wet and dry states have been characterized by transmission electron microscopy and confocal laser scanning microscopy. The chemical structure of the microcapsules has been verified by FT‐IR spectroscopy. The microcapsules could be hydrolytically degraded in a phosphate buffer at biological pH.

     

Charge-controlled permeability of polyelectrolyte microcapsules

Multilayer microcapsules showing unique charge-controlled permeability have been successfully fabricated by employing poly(styrene sulfonate) (PSS)-doped CaCO3 particles as templates. Encapsulation of the PSS molecules is thus achieved after core removal. Scanning force microscopy (SFM), UV-vis, Raman spectroscopy, and zeta-potential confirm the existence of the PSS molecules in the CaCO3 particles and the resultant microcapsules, which are initially incorporated during the core fabrication process. A part of these additionally introduced PSS molecules interacts with PAH molecules residing on the inner surface of the multilayer wall to form a stable complex, while the other part is intertwined in the capsule wall or in a free state. Capsules with this structure possess many special features, such as highly sensitive permeability tuned by probe charge and environmentally controlled gating. They can completely reject negatively charged probes, but attract positively charged species to form a higher concentration in the capsule interior, as evidenced by confocal microscopy. For example, the capsules completely exclude dextran labeled with fluorescein isothiocyanate (FITC-dextran), but are permeable for dextran labeled with tetramethylrhodamine isothiocyanate (TRITC-dextran) having similar molecular mass (from 4 to 70 kDa), although there are only few charged dyes in a dextran chain. By reversing the charge of the probes through pH change, or by suppressing charge repulsion through salt addition, the permeation can be readily switched for proteins such as albumin or small dyes such as fluorescein sodium salt.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

仿生制备有机-无机复合微囊固定化葡萄糖氧化酶

将层层自组装技术与仿生矿化技术相结合,由聚苯乙烯磺酸钠、聚二甲基二烯丙基氯化铵和二氧化硅成功制备(聚苯乙烯磺酸钠-聚二甲基二烯丙基氯化铵)₂-二氧化硅复合微囊.采用扫描电子显微镜、红外光谱和热重对微囊的形貌和化学结构进行了表征.以该复合微囊作为理想载体固定化葡萄糖氧化酶.结果表明,固定于复合微囊中的葡萄糖氧化酶的热稳定性、pH稳定性、操作稳定性得到了提高;在最适条件下,复合微囊固定化葡萄糖氧化酶的酶活回收率为72.85%,米氏常数是游离葡萄糖氧化酶的2.21倍.复合微囊在化学/生物催化、药物/基因传递系统和生物传感器应用方面具有一定的潜能.     

pH/temperature dual stimuli-responsive microcapsules with interpenetrating polymer network structure

The microcapsules with interpenetrating polymer network (IPN) structure based on crosslinked poly (N-isopropylacrylamide) (PNIPAM) and crosslinked poly (acrylic acid) (PAA) were fabricated in a three-step process. Firstly, silica/PNIPAM core/shell composite particles were synthesized by thermo-initiated seed precipitation polymerization using 3-(trimethoxysilyl)propyl methacrylate modified silica colloidal particles as seeds and N-isopropylacrylamide and N,N′-methylenebisacrylamide (MBA) as monomer and crosslinker, respectively. Secondly, PAA network was incorporated into the shell of the composite particles by redox-initiated polymerization of acrylic acid and MBA entrapped in the PNIPAM network. Finally, the silica core of the composite particles was removed using hydrofluoric acid under certain condition to produce the microcapsules. The chemical compositions, their mass ratio, and particle sizes of the particles formed in each step were determined by Fourier transformation infrared spectroscopy, thermogravimetry, and dynamic laser light scattering (DLLS), respectively. The IPN structure of the microcapsules was identified by transmission electron microscopy (TEM) using uranyl acetate staining method, and their hollow structure was evidenced by TEM and scanning electron microscopy. Their temperature- or pH-dependent hydrodynamic diameters were measured by DLLS, and the results showed that the microcapules had both pH- and temperature-responsive properties, and the temperature-responsive component and the pH-responsive component inside the microcapsule shell had little interference with each other.     

Reversible pH‐Dependent Properties of Multilayer Microcapsules Made of Weak Polyelectrolytes

Summary: We investigated microcapsules composed of the weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) assembled on calcium carbonate cores. These capsules are stable in the pH range from 2.5 to 11.5, undergoing reversible swelling in the pH interval from 2.7 to 2.6. Capsule swelling occurs at a protonation degree above 90%. The pH‐dependent size variation of PAH/PMA capsules is blocked after crosslinking of the polyelectrolyte layers.

Schematic of the swelling and de‐swelling of the capsules with changing pH.     

Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

交联壳聚糖水凝胶填充层状微胶囊的制备与性能

在甲基丙烯酸和乳酸接枝修饰的水溶性壳聚糖(CML)存在下, 合成了尺寸均匀的球形CML杂化碳酸钙微粒. 通过层层组装(LBL)技术在该微粒表面形成了聚苯乙烯磺酸钠(PSS)/聚烯丙基胺盐酸盐(PAH)多层膜, 去除碳酸钙微粒后得到内部含有CML的聚电解质微胶囊. 进一步采用紫外光引发CML聚合, 将CML转化为CML微凝胶, 得到内部填充凝胶的微胶囊. 通过扫描电镜、光学显微镜和透射电镜等技术表征了微胶囊的结构. 与传统的LBL微胶囊不同, 凝胶填充的微胶囊干燥时尺寸收缩, 但仍可保持球形; 再次水化后, 能够膨胀恢复其原有尺寸和形态. 各种具有不同电荷性质、分子量和亲疏水性的染料分子及蛋白质均可有效地装载到微胶囊内.     

Controlled Stripping of Polyelectrolyte Multilayers by Quaternary Ammonium Surfactants

The quartz crystal microbalance with dissipation technique (QCM‐D) and atomic force microscopy (AFM) have been employed to study the interaction of N‐tetradecyl trimethyl ammonium bromide (TdTmAB) with polyelectrolyte multilayers containing poly(sodium 4‐styrene sulfonate) (PSS) as the polyanion and either poly(allylamine hydrochloride) (PAH) or poly(diallyl dimethyl ammonium chloride) (PDADMAC) as the polycations. The multilayers were exposed to aqueous solutions of TdTmAB. This resulted in a selective removal of PDADMAC PSS layers while layers with PAH as polycation remained stable. It is suggested that PDADMAC/PSS multilayers can be employed as strippable protecting layers.

     

Poly(ethyleneimine) microcapsules: glutaraldehyde‐mediated assembly and the influence of molecular weight on their properties

Poly(ethyleneimine) (PEI) microcapsules were prepared via the method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly, which utilized GA to cross‐link the adsorbed PEI layer and to introduce free aldehyde group on the surface for the next PEI adsorption on MnCO₃ microparticles, followed by core removal. Evidenced by ellipsometry, the PEI multilayers grew nearly linearly along with the layer number and their thickness was controlled at the nanometer scale. The hollow structure, morphology, and wall thickness were characterized by scanning electron microscopy (SEM), scanning force microscopy (SFM), and confocal laser scanning microscopy (CLSM), revealing that the capsule structure as well as the cut‐off molecular weight of the capsule wall could be tuned by the molecular weight of PEI. This offers a general and novel pathway to fabricate single component capsules with pre‐designed structure (size, shape, and wall thickness) and properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4/poly(N‐isopropylacrylamide‐co‐methacrylic acid) two‐shell thermosensitive magnetic composite hollow latex particles

In this study, the poly(N‐isopropylacrylamide‐methylacrylate acid)/Fe₃O₄/poly(N‐isopropylacrylamide‐methylacrylate acid) (poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA)) two‐shell magnetic composite hollow latex particles were synthesized by four steps. The poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles were synthesized first. Then, the second step was to polymerize NIPAAm, MAA, and crosslinking agent in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly(NIPAAm‐MAA) core–shell latex particles. Then, the core–shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, the Fe₃O₄ nanoparticles were generated in the presence of poly(NIPAAm‐MAA) hollow polymer latex particles and formed the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles. The fourth step was to synthesize poly(NIPAAm‐MAA) in the presence of poly(NIPAAm‐MAA)/Fe₃O₄ latex particles to form the poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA) two‐shell magnetic composite hollow latex particles. The effect of various variables such as reactant concentration, monomer ratio, and pH value on the morphology and volume‐phase transition temperature of two‐shell magnetic composite hollow latex particles was studied. Moreover, the latex particles were used as carriers to load with caffeine, and the caffeine‐loading characteristics and caffeine release rate of latex particles were also studied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2880–2891     

Controllable exploding microcapsules as drug carriers

Controllable exploding polyelectrolyte microcapsules were developed by layer-by-layer assembly of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) on a dextran microgel core containing a cleavable disulfide bond fabricated via click chemistry. The microcapsules can explode upon the injection of DTT with an explosive release of the drug.     

Preparation of hollow composite spheres with raspberry‐like structure based on hydrogen‐bonding interaction

The hollow composite spheres with a raspberry‐like structure were prepared by a self‐assemble heterocoagulation based on the inter‐particle hydrogen‐bonding interaction between the amide groups of hollow poly (N,N′‐methylenebisacrylamide‐co‐N‐isopropyl acrylamide) (P(MBA‐co‐NIPAAm)) microspheres and the carboxylic acid groups of poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA)) nanoparticles, in which P(EGDMA‐co‐MAA) nanoparticle acted as the corona and the hollow P(MBA‐co‐NIPAAm) microsphere behaved as the core. The control coverage of the corona particles on the surface of hollow core microspheres of P(MBA‐co‐NIPAAm)/P(EGDMA‐co‐MAA) hollow composite sphere was studied in detail through adjustment of the mass ratio between the core and corona particles. The effect of the pH on the stability of the raspberry‐like hollow spheres was investigated. The polymer particles and the resultant heterocoagulated raspberry‐like hollow spheres were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Copyright © 2008 John Wiley & Sons, Ltd.