Aggregation of Poly(γ‐benzyl L‐glutamate)s Followed by Time‐Resolved Emission Anisotropy

Syntheses of poly(γ‐benzyl L ‐glutamate)s (PBLGs) labeled with various fluorophores (tryptophan, dansyl, and anthracene) having different molecular weights are reported. Association of PBLG chains was studied by time‐resolved emission anisotropy in the solvents supporting the aggregation process (1,4‐dioxane and tetrahydrofuran) and in N,N‐dimethylformamide, where the aggregates were not formed. The influence of molecular weight and polymer concentration on PBLG association was studied as well. The limiting emission anisotropy (r_∞) and rotational correlation times (ϕ) were determined. The chain relaxation dynamics were compared with the fluorescence lifetimes of the fluorophores and spectroscopically suitable labels were selected. Tryptophan was found to be an inconvenient fluorophore for the association study of PBLGs because of its short excited‐state lifetime. Dansyl and anthracene fluorophores, however, proved to be suitable labels for the chain dynamics study of PBLGs in solution. The mobilities of PBLG chains in 1,4‐dioxane were slower than those in tetrahydrofuran and N,N‐dimethylformamide because of PBLG association in this solvent.     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

Study on polymeric micelles of poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer and its mixtures with poly(γ-benzyl l-glutamate) homopolymer in ethanol

Poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of the PBLG homopolymer with PEG. NMR spectroscopy was used to confirm the composition of the PBLG-graft-PEG copolymer. FTIR spectroscopy was used to characterize the chain conformation of polypeptide segments in the PBLG-graft-PEG copolymer in solid state. The self-assembly behavior of PBLG-graft-PEG and its mixtures with PBLG in ethanol were investigated by transmission electron microscopy (TEM) and viscometry. Experimental results showed that the PBLG-graft-PEG copolymer can self-assemble to form polymeric micelles with a core-shell structure of a thin shuttle-like shape. The introduction of the PBLG homopolymer into the mixed system not only decreases the critical micelle concentration (CMC) but also changes the morphology of the micelles from their shuttle-like shape to cylindrical shape. The effects of test temperature on the critical micelle concentration of PBLG-graft-PEG were also studied.     

Novel biomimetic composite based on collagen and poly(γ‐benzyl L‐glutamate)‐co‐poly(glutamic acid)

Novel biomimetic composite was prepared by the reaction of collagen and poly(γ‐benzyl L ‐glutamate)‐co‐poly(glutamic acid) (PBLG‐co‐PGA), which were crosslinked by non‐toxic crosslinking reagents 1‐ethyl‐(dimethylaminopropyl) carbodiimide (EDC) and N‐hydroxysuccinimide (NHS). The composite was characterized by FTIR and DSC. FTIR results confirmed that the collagen in the composite was successfully crosslinked with PBLG‐co‐PGA. DSC results showed that the composites possessed higher shrinkage temperature and higher thermal stability than the collagen. The water absorption test showed that the water absorbency of the composites increased with the increase in PBLG‐co‐PGA content in the composite. The studies of collagenase degradation and the tensile strength showed that the biostability and the tensile strength of the composites were significantly improved in comparison with that of the collagen. According to the investigations of cell adherent ratio and cell proliferation in vitro, the composite possessed good biocompatibility. Copyright © 2007 John Wiley & Sons, Ltd.     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Gelation Rate Modulation of an α‐Cyclodextrin and Poly(ethylene glycol)‐Grafted Hyaluronic Acid Solution System by Inclusion Complexation of a Microphase‐Separated Structure

Summary: The gelation rate of a poly(ethylene glycol)‐grafted hyaluronic acid (PEG‐graft‐HA) solution with adding α‐CD was investigated in term of the microphase separation between the grafted PEG and HA. The gelation rate of PEG‐graft‐HA exhibiting the microphase‐separated structure was two times higher than that of PEG‐graft‐HA showing a homogeneous miscible state.

The formation of microphases by PEG‐graft‐HA contributes to its rapid gelation upon the addition of α‐CDs.     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Phase equilibrium studies on rod/solvent and rod/coil/solvent systems containing poly(α, L‐glutamate) having oligo(ethylene glycol) side chains

Phase equilibrium studies for semiconcentrated solutions of rodlike poly(γ‐benzyl L ‐glutamate) having oligo(ethylene glycol) as side chains (PBLG‐g‐OEG) have been investigated. The phase‐boundary concentrations in isotropic and anisotropic phases for N,N‐dimethylformamide (DMF) solution of PBLG‐g‐OEG with short side chains (PBLG2‐g‐380) are higher than those for solution of PBLG‐g‐OEG with long side chains (PBLG2‐g‐770). The lattice theory and the scaled particle theory for nematic solution, which don't distinguish the molecular architecture of the rodlike polymer, cannot explain this experimental result. Repulsive interaction between rodlike polymers by means of the attached side chains is proposed for the molecular orientation of PBLG‐g‐OEG in anisotropic state in order to describe the experimental result. Ternary phase diagrams of PBLG‐g‐OEG/poly(ethylene glycol) (PEG)/DMF show that the miscibility of rodlike PBLG‐g‐OEG and coiled PEG is most enhanced in the system of PBLG2‐g‐770, which has longest and largest amount of side chains. This experimental observation is explained by using the calculation based on the lattice theory and the repulsive interaction of side chains proposed above. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1331–1340, 2000     

Synthesis and Self‐Assembly of Thermoresponsive Amphiphilic Biodegradable Polypeptide/Poly(ethyl ethylene phosphate) Block Copolymers

We report the design and synthesis of new fully biodegradable thermoresponsive amphiphilic poly(γ‐benzyl L ‐glutamate)/poly(ethyl ethylene phosphate) (PBLG‐b‐PEEP) block copolymers by ring‐opening polymerization of N‐carboxy‐γ‐benzyl L ‐glutamate anhydride (BLG? NCA) with amine‐terminated poly(ethyl ethylene phosphate) (H₂N? PEEP) as a macroinitiator. The fluorescence technique demonstrated that the block copolymers could form micelles composed of a hydrophobic core and a hydrophilic shell in aqueous solution. The morphology of the micelles as determined by transmission electron microscopy (TEM) was spherical. The size and critical micelle concentration (CMC) values of the micelles showed a decreasing trend as the PBLG segment increased. However, UV/Vis measurements showed that these block copolymers exhibited a reproducible temperature‐responsive behavior with a lower critical solution temperature (LCST) that could be tuned by the block composition and the concentration.     

Aggregation behavior of poly(γ‐benzyl‐L‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L‐glutamate) rod‐coil‐rod triblock copolymer in N,N‐dimethylformamide

Solution property of poly(γ‐benzyl‐L ‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L ‐glutamate) (GIG copolymer) was studied by using dynamic light scattering and static light scattering for N,N‐dimethylformamide (DMF) solution and DMF/toluene mixed solutions. GIG copolymer proved to aggregate in DMF and under DMF‐rich condition, that is, high‐polar region. The aggregate decreased in size, and completely disappeared under toluene‐rich condition, that is, low‐polar region. The correlation between solubility parameter and aggregate size of GIG copolymer in the DMF/toluene solution systems quantitatively demonstrated how strongly polarity caused by hydrogen bond made an impact on the aggregation behavior. Because the main driving force to the aggregation under DMF‐rich condition originates with polyisoprene (PIP) blocks, the aggregate in DMF is considered to be a core‐shell micelle consisting of flexible PIP core surrounded by rigid poly(γ‐benzyl‐L ‐glutamate) (PBLG) shell. The values of dimensionless parameter ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, revealed that a single chain of GIG copolymer had the form of rigid rod with flexibility, that is, once‐broken rod, caused by the incorporation of a flexible PIP chain between two rigid PBLG rods in the DMF/toluene solution system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1740–1748, 2010     

Polyion complex micelles formed from glucose oxidase and comb‐type polyelectrolyte with poly(ethylene glycol) grafts

The comb‐type polyelectrolyte, poly(ethylene glycol)‐graft‐poly(allyl amine) (PEG‐g‐PAA), was synthesized to prepare polyion complex (PIC) micelles with Aspergillus Niger Glucose oxidase (GOD). Even after mixing GOD and PEG‐g‐PAAs with various PEG contents, the resulting mixtures remained transparent but the mixture of GOD and PAA homopolymer immediately precipitated. In the mixtures prepared with a stoichiometric mixing ratio, the formation of PIC micelles with a core‐shell structure was suggested from dynamic and static light scattering measurements. Glucose, the substrate for GOD, could easily diffuse into the PIC micelles, and the GOD molecules were active even in the core of the PIC micelles. GOD didn't lose its enzymatic activity through entrapment into the PIC micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3842–3852, 2008     

Crystallization of Poly(ε‐caprolactone) under Nanoparticle Confinement

Solid‐state ¹³C‐NMR spectroscopy has been used to characterize the conformation of the hydrophobic poly(ε‐caprolactone) core of a nanoparticle having a cross‐linked hydrophilic poly(acrylic acid)/polyacrylamide shell. The amphiphilic nanoparticles were synthesized from the diblock copolymer, poly(ε‐caprolactone)₁₂₁‐b‐poly(acrylic acid)₁₆₅ by self‐assembly into polymer micelles, followed by cross‐linking via condensation reactions between the carboxylic acid groups of the hydrophilic shell and the amine groups of 2,2′‐(ethylenedioxy)bis(ethylamine). NMR Experiments performed at −30° on nanoparticles rapidly quenched from 60° show that the core is largely noncrystalline and locally disordered. Heating to 25° results in some crystallization, although far less than that observed for bulk poly(ε‐caprolactone) homopolymer. Storage at −30° results in further crystallization and conversion of most rubbery, mobile regions into more rigid, locally ordered amorphous domains. The absence of dipolar coupling between natural‐abundance ¹³C in the poly(ε‐caprolactone) core of the nanoparticle, and ¹⁵N labels dispersed throughout the cross‐linked shell show that the interface between core and shell is sharp. The dipolar coupling measurements were accomplished by ¹³C{¹⁵N} rotational‐echo double resonance.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Pendant groups fine‐tuning thermal gelation of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) aqueous solution

Novel poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) bearing pendant hydrophobic γ‐(carbamic acid benzyl ester) groups (PECB) and hydrophiphilic amino groups (PECN) were synthesized based on the functionalized comonomer γ‐(carbamic acid benzyl ester)‐ε‐caprolactone (CABCL). The thermal gelation behavior of the amphiphilic copolymer aqueous solutions was examined. The phase transition behavior could be finely tuned via the pendant groups, and an abnormal phenomenon occurred that the sol–gel transition temperature shifted to a higher temperature for PECB whereas a lower temperature for PECN. The micelles percolation was adopted to clarify the hydrogel mechanism, and the effect of the pendant groups on the micellization was further investigated in detail. The results demonstrated that the introduction of γ‐(carbamic acid benzyl ester) pendant groups significantly decreased the crystallinity of the copolymer micelles whereas amino pendant groups made the micelles easy to aggregate. Thus, the thermal gelation of PEG/PCL aqueous solution could be finely tuned by the pendant groups, and the pendant groups modified PEG/PCL hydrogels are expected to have great potential biomedical application. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2571–2581     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

Fabrication of Poly(L‐lactide)‐block‐Poly(ethylene glycol)‐block‐Poly(L‐lactide) Triblock Copolymer Thin Films with Nanochannels: An AFM Study

This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm²) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.

     

The Surface Modification of Hydroxyapatite Nanoparticles by the Ring Opening Polymerization of γ‐Benzyl‐L‐glutamate N‐carboxyanhydride

The surface modification of hydroxyapatite (HA) nanoparticles by the ring opening polymerization (ROP) of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG‐NCA) was proposed to prepare the poly(γ‐benzyl‐L ‐glutamate) (PBLG)‐grafted HA nanoparticles (PBLG‐g‐HA) for the first time. HA nanoparticles were firstly treated by 3‐aminopropylthriethoxysilane (APS) and then the terminal amino groups of the modified HA particles initiated the ROP of BLG‐NCA to obtain PBLG‐g‐HA. The process was monitored by XPS and FT‐IR. The surface grafting amounts of PBLG on HA ranging from 12.1 to 43.1% were characterized by thermal gravimetric analysis (TGA). The powder X‐ray diffraction (XRD) analysis confirmed that the ROP only underwent on the surface of HA nanoparticles without changing its bulk properties. The SEM measurement showed that the PBLG‐g‐HA hybrid could form an interpenetrating net structure in the self‐assembly process. The PBLG‐g‐HA hybrid could maintain higher colloid stability than the pure HA nanoparticles. The in vitro cell cultures suggested the cell adhesion ability of PBLG‐g‐HA was much higher than that of pure HA.

     

Shear piezoelectricity in single‐wall carbon nanotube/poly(γ‐benzyl‐L‐glutamate) composites

Single‐wall carbon nanotubes (SWCNTs) have been added to high molecular weight poly(γ‐benzyl‐L ‐glutamate), or PBLG, to evaluate their effects on the polymer's shear piezoelectricity. While the addition of SWCNTs increased various PBLG physical properties such as electrical conductivity, dielectric constant, several mechanical properties, and electrostriction coefficient, the shear piezoelectricity remained constant up to a 0.3 wt % SWCNT concentration. The composite crystallinity, orientation, and SWCNT alignment (measured by X‐ray diffraction, birefringence, and polarized Raman spectroscopy, respectively) were found to be constant up to this same concentration, corroborating the shear piezoelectric findings. PBLG composites made with acid‐treated (and therefore less electrically conductive) SWCNTs exhibited similar shear piezoelectric behavior, indicating that neither the SWCNT type, concentration (up to the percolation threshold), nor electrical conductivity influences PBLG shear piezoelectricity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Investigation on thermoresponsive behavior of biodegradable poly(γ‐glutamic acid)‐graft‐L‐phenylalanine ethyl ester

The thermosensitivity of biodegradable and non‐toxic amphiphilic polymer derived from a naturally occurring polypeptide and a derivative of amino acid was first reported. The amphiphilic polymer consisted of poly(γ‐glutamic acid) (γ‐PGA) as a hydrophilic backbone, and L ‐phenylalanine ethyl ester (L ‐PAE) as a hydrophobic branch. Poly(γ‐glutamic acid)‐graft‐L ‐phenylalanine (γ‐PGA‐graft‐L ‐PAE) with grafting degrees of 7–49% were prepared by varying the content of a water‐soluble carbodiimide (WSC). γ‐PGA‐graft‐L ‐PAE with a grafting degree of 49% exhibited thermoresponsive phase transition behavior in an aqueous solution at around 80°C. The copolymers with grafting degrees in the range of 30–49% showed thermoresponsive properties in NaCl solution. A clouding temperature (T_cloud) could be adjusted by changing the polymer concentration and/or NaCl concentration. The thermoresponsive behavior was reversible. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012