Controlled synthesis of fluorinated copolymers with pendant sulfonates

Novel, fluorinated copolymers with different architectures bearing sulfopropyl groups were synthesized in a three‐step procedure. The first step involved atom transfer radical polymerization (ATRP) of aromatic fluorinated monomers followed by two modification reactions performed on the polymer chain: demethylation and sulfopropylation. As a result two types of fluorinated copolymers were obtained. The first one was synthesized by ATRP of 2,3,5,6‐tetrafluoro‐4‐methoxystyrene (TFMS). After the modification steps copolymers with randomly distributed sulfopropyl groups along the backbone were obtained. The second type of copolymers has diblock architecture with one of the blocks being sulfopropylated. They were synthesized via ATRP of 2,3,4,5,6‐pentafluorostyrene (FS) initiated by a PTFMS‐macroinitiator followed by demethylation and sulfopropylation of the TFMS‐block. The copolymers were characterized by size‐exclusion chromatography, FTIR, and ¹H NMR spectroscopy. Their thermal properties were investigated by differential scanning calorimetry and thermal gravimetric analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7827–7834, 2008     

Synthesis of crosslinkable fluorinated polyesters for optical waveguide devices

A series of novel crosslinkable, highly fluorinated polyesters were synthesized by copolycondensation reactions of terephthaloyl chloride with 4, 4′‐(hexafluoroisopropy‐lidene)‐diphenol and 2,2,3,3,4,4,5,5,6,6,7,7‐dodecafluoro‐octane‐1,8‐diol, followed by reaction with 2‐hydroxyethyl methacrylate. The resulting polyesters with the molecular weights (M_n: 12,100–20,000 g mol^?1) and polydispersities (1.49–2.25) were useful for the fabrication of polymer optical devices because of their good solubility in common organic solvent and the processable flexibility. The ratios of the components of the polyesters were characterized by FTIR and NMR. The polyesters had high glass transition temperature (T_g,: up to 170 °C) and good thermal stabilities (T_d: up to 470 °C). The refractive index of the polyester film was tuned and controlled in the range of 1.447–1.576 at 1550 nm by monitoring the component fractions during the preparation procedures. Low‐loss optical waveguides were fabricated from the resulting polyesters and the propagation loss of the channel waveguides was measured to be around 0.56 dB/cm at 1550 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5923–5931, 2007     

Highly fluorinated low‐molecular‐weight photoresists for optical waveguides

A series of highly fluorinated polymers were synthesized by copolymerization of 2,3,4,5,6‐pentafluorostyrene (PFS) and fluorinated styrene derivate monomer (FSDM). Their chemical structure were confirmed by ¹H NMR, ¹³C NMR, and ¹⁹F NMR spectra. The refractive index and cross‐linking density of the polymers can be tuned and controlled by monitoring the feed ratio of comonomers. A series of negative‐type low‐molecular‐weight fluorinated photoresists (NFPs) were prepared by composing of fluorinated polystyrene derivates (FPSDs), diphenyl iodonium salt as a photoacid generator (PAG) and solvent. The polymer films prepared from NFP by photocuring exhibited excellent chemical resistance and thermal stabilities (T_d ranged from 230.5 to 258.1 °C). A clear negative pattern was obtained through direct UV exposure and chemical development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.25 dB/cm at 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

Synthesis and Evaluation of Thermal Properties of Fluorinated Poly(aryl ether) Dendritic Structures Based on Calix[4]arenes

By using a convergence approach two new poly(aryl ether) dendritic structures carrying 4-fluorobenzyl bromide on the surface and calix[4]arenes as a core with G1 were synthesized for the first time. Fluorinated dendritic structures are connected through ether bonds on the lower rim of the calix[4]arene unit. Its structure was determined by ¹H-NMR and elemental analysis. The thermal stabilities of fluorinated dendritic structures, based on calix[4]arenes, were investigated using thermogravimetric analysis. The activation energies and thermal degradation of the structures were calculated with the Ozawa Method.     

Siloxane/silane‐crosslinked systems from supercritical carbon dioxide: I. Fluorinated poly(ether/siloxane)s

A series of new, fluorinated, silicone‐containing polymers with crosslinkable units has been synthesized by hydrosilation in toluene and supercritical carbon dioxide (70°C, 3000 psi) using platinum‐divinyltetramethyldisiloxane (Pt‐DVTMS) as a catalyst. The polymers were characterized by FTIR, NMR, GPC, TGA, and DSC. The molecular weights of these polymers ranged from 9,900 to 41,000. Comparison of the properties between reactions in toluene versus supercritical carbon dioxide indicated that the green solvent is a suitable alternative for hydrosilation. The hydrolysis and thermal curing of the crosslinkable precursor polymers produced higher molecular weight polymers with thermal stabilities ranging from 347 to 417°C. Copyright © 2007 John Wiley & Sons, Ltd.     

Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene‐derivative PCBM

A series of crosslinkable maleimide conjugated polymers with different vinyl group contents as side‐chain crosslinking sites have been synthesized by the Suzuki coupling reaction. Polymer solar cells (PSCs) were fabricated based on an interpenetrating network of the crosslinkable maleimide polymers as the electron donor, and a fullerene derivative, (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), as the electron acceptor. The crosslinkable maleimide polymers underwent crosslinking reaction at the side‐chain vinyl groups upon the thermal treatment with or without the addition of initiator, azobisisobutyronitrile (AIBN). Better photovoltaic (PV) performances were obtained for the PSCs based on the polymer crosslinking without using initiator, whereas poorer PV performances were observed for the PSCs based on the polymer crosslinking with the AIBN initiator. In addition, higher operational stability was observed for the crosslinked polymer based solar cell as compared to the solar cell based on the un‐crosslinked polymer. The photo‐physical and PV properties of the cross‐linked maleimide polymers/PCBM based PSCs are discussed in detail as the morphology and crosslinking density of the polymers are taken into account. Copyright © 2010 John Wiley & Sons, Ltd.     

N‐Boc‐Protected 1,2‐Diphenylethylenediamine‐Based Dendritic Organogels with Multiple‐Stimulus‐Responsive Properties

A new class of poly(benzyl ether) dendrimers, decorated in their cores with N‐Boc‐protected 1,2‐diphenylethylenediamine groups, were synthesized and fully characterized. It was found that the gelation capability of these dendrimers was highly dependent on dendrimer generation, and the second‐generation dendrimer (R,R)‐G₂DPENBoc proved to be a highly efficient organogelator. A number of experiments (SEM, TEM, FTIR spectroscopy, ¹H NMR spectroscopy, rheological measurements, UV/Vis absorption spectroscopy, CD, and XRD) revealed that these dendritic molecules self‐assembled into elastically interpenetrating one‐dimensional nanostructures in organogels. The hydrogen bonding, π–π, and solvophobic interactions were found to be the main driving forces for formation of the gels. Most interestingly, these dendritic organogels exhibited smart multiple‐stimulus‐responsive behavior upon exposure to environmental stimuli such as temperature, anions, and mechanical stress.     

Synthesis and solution properties of anionic linear–dendritic block amphiphiles

The design and synthesis of novel linear–dendritic diblock amphiphiles with linear poly(acrylic acid) (PAA) as the hydrophilic block and dendritic poly(benzyl ether) as the hydrophobic block are described. The synthetic process consisted of two steps: a poly(methyl acrylate) (PMA)–poly(benzyl ether) dendrimer series were synthesized with atom transfer radical polymerization, and through the hydrolysis of linear PMA block into PAA, amphiphilic block copolymers, the PAA–poly(benzyl ether) dendrimer series, were obtained. The copolymers were characterized by ¹H NMR, Fourier transform infrared, and size exclusion chromatography and exhibited well‐defined architectures and low polydispersities. When the generation number of the dendritic block (G_i) less or equal to 3 and the degree of polymerization of the linear chain (n) was greater than 10, the amphiphiles were water‐soluble. The solution intrinsic viscosity increased with both the length of linear chain and the generation number of the dendritic block. The results obtained demonstrate that dendritic blocks play an unusual role in aqueous solutions of amphiphiles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4282–4288, 2000     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

New fluorinated thermoplastic elastomers. I. The synthesis and thermal characteristics of α,ω‐dihydrosilane hybrid fluorinated polysiloxane precursors

The synthesis of new α,ω‐dihydrosilane hybrid fluorinated polysiloxanes is described via the polycondensation between a diallyl perfluorinated compound and tetramethyldisiloxane. Control over the size of the oligomers is possible when the reaction is performed in two steps. The length of the polysiloxane chains influences the glass‐transition temperature and the thermal stability of the fluorinated oligomers: the higher the length is, the higher the glass‐transition temperature and the thermal stability are. The synthesized compounds have been characterized with ¹H, ¹⁹F, and ²⁹Si NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4485–4492, 2002     

Syntheses of biodegradable polymer networks based on polycaprolactone and glutamic acid

Biodegradable trifunctional oligomer was synthesized from polycaprolactone and glutamic acid and characterized by Fourier‐transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. Injectable and in situ crosslinkable polymer networks were fabricated by the copolymerization of oligomer with triethylene glycol dimethacrylate (TEGDMA) and used to evaluate the initial compressive strengths, viscosities, shrinkages, thermal stabilities, and biodegradabilities in the forms of polymer network neat resin and their composites with β‐tricalcium phosphate. The initial compressive strengths (CS) values of neat resins ranged from 9.54 to 187.6 MPa. Both neat resins and composites had polymerization shrinkage ranging from 0% to 11.7%, which increased with increasing of TEGDMA contents in resin. Moreover, in polymer composite resins, shrinkage values decreased with increasing filler level from 0% to 4.6%, and exothermic evolution values decreased from 33.5°C to 29.7°C as increasing filler level. The composite with the formulation of (polycaprolactone)‐glutamate triacrylate (PCLGTA)/TEGDMA (25/75) and powder/liquid (P/L) ratio of 1.0 exhibited the highest exothermal and lowest shrinkage values. The increase of oligomer in the formulation led to an increase in viscosity.     

Syntheses and characterizations of bis(trialkoxysilyl)oligoimides. II. Syntheses and characterizations of fluorinated crosslinkable oligoimides with low refractive indices

Novel crosslinkable fluorinated oligoimides were prepared in two steps. The first involved the synthesis of oligoimides terminated with nadic or allylic double bonds, and the second step was materialized either by a radical addition of mercaptotrialkoxysilane derivatives onto nadic double bonds or a hydrosilylation reaction of hydrogenotrialkoxysilane derivative onto allylic double bonds. Three kinds of crosslinking of the trialkoxysilane end groups were studied. The first kind entailed a thermal self‐crosslinking of trialkoxysilane groups. The second process of crosslinking incorporated a bicomponent system—the crosslinked agent was 1,1,1‐tris(4‐hydroxyphenyl)ethane (TRIOH). The trialkoxysilane groups reacted with the hydroxyl–phenol groups of TRIOH to give thermally stable phenoxysilane bonds as well as a crosslinking network. The last method was also a bicomponent system; the oxalic acid was added into an oligoimide solution where by thermal treatment water was created. The water molecules hydrolyzed the trialkoxysilane groups into silanol groups that polycondensed into a crosslinked network following a sol–gel process. The mechanism of the different crosslinking reactions was investigated by Fourier transform infrared spectroscopy and solid‐state ²⁹Si NMR. The self‐crosslinked material prepared from precursor α,ω‐trimethoxysilyl fluorinated oligomer (M_n = 5500 g · mol^?1) exhibited a 10 wt % loss temperature under air higher than 420 °C and a low birefringence (Δn = 0.008) at 1.300 μm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2602–2619, 2001     

可交联含氟聚醚醚酮的合成

聚醚醚酮 (PEEK)是一种耐热等级高、耐化学药品、耐辐射并有优异的电性能及机械性能的特种工程塑料 .由于其综合性能优异 ,PEEK在航空航天、通信、电子和机械化工等领域获得成功应用 [1] .含氟芳香聚合物以其独特的性能而成为低介电常数微电子和低损耗光波导器件极具潜力的材料 [2 ] .聚合物良好的溶解性虽对光电集成电路的加工十分重要 ,但也要满足多层化操作过程 ,还要考虑器件成型后的抗化学药品性 .因而 ,在聚合物中引入可交联组分是必要和可行的方法 .另外 ,交联后的聚合物将有更高的玻璃化转变温度 (Tg)、更好的尺寸稳定性和防开…     

SiO2–poly(amidoamine) dendrimer inorganic/organic hybrids

SiO₂–poly(amidoamine) (PAMAM) dendrimer hybrids were synthesized via (1) a Michael addition reaction between the dendrimer and 3‐(trimethoxysilyl) propyl acrylate, (2) the dissolution of the formed compound in methanol, and (3) the mixing of the latter solution with a methanol solution of partly hydrolyzed tetraethylorthosilicate (TEOS) and its casting on a glass substrate. ¹H NMR indicated that in the first step, 77% of the secondary amines were converted into tertiary amines when the fourth‐generation dendrimer was employed and 46% were converted when the second‐generation dendrimer was used. The final SiO₂–PAMAM dendrimer hybrids were obtained via the hydrolysis and condensation of the compound obtained via the Michael addition and the methanol solution of partly hydrolyzed TEOS. The compartmentalized structure of the hybrids due to the compartments of the dendrimers could be controlled by changing the dendrimer and the amount of TEOS. Scanning electron microscopy and transmission electron microscopy micrographs provided information about the structure of the hybrids. Like the PAMAM dendrimer, the SiO₂–PAMAM dendrimer hybrids exhibited a high metal ion complexing capacity because of the presence of the compartments of the dendrimer; they can be, however, much more easily handled, and, as demonstrated by thermogravimetric experiments, have much higher thermal resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1443–1449, 2000     

Perfluorinated Dendrimers Based on Calix[4]arenes and Cyclam: Synthesis,Thermal Properties and Biological Activities

Four new dendritic structures carrying perfluorobenzyl bromide on the surface and calix[4]arene and cyclam as a core were synthesized by using the convergent approach. These structures were determined by ¹H-NMR, ¹³C-NMR and elemental analysis. Thermal stabilities of fluorinated dendritic structures were investigated using thermogravimetric analysis. Activation energies and thermal degradation of the structures were calculated with the Ozawa method. Thermogravimetric analysis of the dendritic structures reveals that the thermal stability of the structures increases with an increase in the number of the fluorine atoms. Dendritic structures synthesized were tested for their antimicrobial activity against, Salmonella typhimurium NRRLB, Micrococcus luteus, Pseudomonas aeruginosa, Enterococcus fecalis ATCC-29212, Bacillus cereus ATCC-117787, Klepsiella pneumoniae, Bacillus subtilis NRS-744 and Proteus vulgoris, Yersinia enterolitica, Saccharomyces cereviciae. The structures showed comparative activity against different strains of bacteria. Biological activities of the dendritic structures were seen to increase with an increase in fluorination and the number of nitrogen atoms.     

Synthesis of thermally crosslinkable fluorine‐containing poly(arylene ether ketone)s—II. Propargyl ether terminated poly(arylene ether ketone)s

Novel thermally crosslinkable fluorine‐containing poly(arylene ether ketone)s comprised of 2,3,5, 6‐tetrafluoro‐1,4‐phenylene moiety were synthesized by the termination of polymer chain ends with propargyl ether groups in order to improve solvent resistance. Crosslinking reaction occurred over 250°C through the formation of both chromen ring and polyene structure. This structure change brought about not only the outstanding solvent resistance but also the increase in glass transition temperature (T_g). The cured films also exhibited excellent thermal stability, transparency and hydrophobicity derived from fluorine atoms. Copyright © 2004 John Wiley & Sons, Ltd.     

Proton‐conductive polymer nanocomposite membranes prepared from telechelic fluorinated polymers containing perfluorosulfonic acid side chains

New classes of fluorinated polymer–polysilsesquioxane nanocomposites have been designed and synthesized. The synthesis method includes radical polymerization using the functional benzoyl peroxide initiator for the telechelic fluorinated polymers with perfluorosulfonic acids in the side chains and a subsequent in situ sol–gel condensation of the prepared triethoxylsilane‐terminated fluorinated polymers with oxide precursors. The telechelic polymer and nanocomposites have been carefully characterized by ¹H and ¹⁹F NMR, FTIR, TGA, and TEM. The ion‐exchange capacity (IEC), water uptake, the state of the absorbed water, and transport properties of the composite membranes have been extensively studied as a function of the content and structure of the fillers. Unlike the conventional Nafion/silica composites, the proton conductivity of the prepared membranes increases steadily with the addition of small amounts of the polysilsesquioxane fillers. In particular, the sulfopropylated polysilsesquioxane‐based nanocomposites display proton conductivities greater than Nafion. This is attributed to the presence of pendant sulfonic acids in the fillers, which increases IEC and offers continuous proton transport channels between the fillers and the polymer matrix. The methanol permeability of the prepared membranes has also been examined. Lower methanol permeability and higher electrochemical selectivity than those of Nafion have been demonstrated in the polysilsesquioxane‐based nanocomposites. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Nanostructured Crosslinkable Micropatterns by Amphiphilic Dendrimer Stamping

Summary: Microcontact printing was used to deposit stable, nanostructured, amphiphilic and crosslinkable patterns of poly(amidoamine organosilicon) (PAMAMOS)‐dimethoxymethylsilyl (DMOMS) dendrimer multilayers onto silicon wafers, glass, and polyelectrolyte multilayers. The effects of dendrimer ink concentration, contact time, and inking method, on the thickness, uniformity, and stability of the resulting patterns were studied using optical microscopy, fluorescence microscopy, atomic force microscopy (AFM), and contact‐angle analysis. Microarrayed dendrimer film thickness was found to be controllable by conditions used during spin self‐assembly.

Optical micrograph of the circular patterns, obtained from a 0.5% PAMAMOS dendrimer solution, on a glass substrate.