Hetero Diels–Alder Chemistry for the Functionalization of Single‐Walled Carbon Nanotubes with Cyclopentadienyl End‐Capped Polymer Strands

Single‐walled carbon nanotubes (SWCNTs) are pre‐functionalized with a pyridinyl‐based dithioester to undergo a hetero Diels–Alder (HDA) reaction with cyclopentadienyl end‐capped poly(methyl)methacrylate (M _n = 2700 g mol⁻¹, PDI = 1.14). Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis (EA), and X‐ray photoelectron spectroscopy (XPS) evidence the success of the grafting process. The estimated resulting grafting density (from XPS and EA) via the HDA reaction increases by a factor of more than two (0.0774 chains·nm⁻² via XPS) compared with typical values obtained via a direct cyclopentadiene driven Diels–Alder conjugation onto non‐functional SWCNTs under similar conditions.

     

Novel Chromophore‐Functionalized Poly[2‐(trifluoromethyl) adamantyl acrylate‐methyl vinyl urethane]s with High Poling Stabilities of the Nonlinear Optical Effect

Nonlinear optical vinyl polymers with high glass transition temperature (T_g) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.

The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here.     

Phenoxy–Ether Ligated Ti Complexes for the Polymerization of Ethylene

Summary: Bis(phenoxy–ether) Ti complexes were investigated as ethylene polymerization catalysts. The complexes, combined with iBu₃Al/Ph₃CB(C₆F₅)₄ or methylaluminoxane (MAO) cocatalysts, can be highly active single‐site catalysts, which display activities ( turnover frequency, max. 2 065 min⁻¹) comparable with that of a highly active bis(phenoxy–imine) Ti complex/MAO system, and provide very high molecular weight polyethylenes ( 2 040 000–5 420 000) at 25 °C under atmospheric pressure.

Synthesis of polyethylene using bis(phenoxy–ether) Ti complexes, an example of which is shown.     

Low‐Temperature Growth of Thick Polystyrene Brushes via ATRP

Summary: This contribution describes the graft polymerization of polystyrene (PS) by atom transfer radical polymerization at 50, 60, and 75 °C. Thick PS brushes were grown from initiator‐functionalized PGMA layers on silicon, and constant growth rates provide indirect evidence that the polymerizations were controlled.

Formation of polystyrene brushes at T < T_g by ATRP of styrene from α‐bromoester initiator‐functionalized poly(glycidyl methacrylate) layers.     

Effect of Molecular Weight on Photoinduced Birefringence in a Chiral Liquid Crystalline Azodye Polymer

Summary: The evolution of the photoinduced birefringence in thin films of narrow polymer fractions is studied and compared with the behavior of the non‐fractionated polymer. The Δn_ind value decreases by increasing the degree of polymerization ( ) within the oligomeric range but becomes independent of molecular weight starting from a of ≈70. Thermal pretreatment of the films results in higher photoinduced birefringence. The films show good stability of the photorecording.

Birefringence induced after 10 min, Δn_ind(600) and its growth rate at the same moment versus molecular weight.     

A Water‐Soluble π‐Conjugated Polymer with up to 100 mg · mL−1 Solubility

A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL⁻¹ as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq₃ device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.

     

The Role of Oxidation in the Migration Mechanism of Layered Silicate in Poly(propylene) Nanocomposites

Summary: Evidence of clay migration from the core to the surface of poly(propylene)/montmorillonite nanocomposites is provided. A three‐ to fivefold increase in the clay concentration of the surface is obtained during isothermal heating in oxidative atmosphere. The mechanism of migration is investigated by means of attenuated total reflectance Fourier transform infrared spectrometry. It is shown that oxygen plays a fundamental role in the migration mechanism.

ρ_Si versus c for the annealed samples.     

Non‐Shrinking Networked Materials from the Cross‐Linking Copolymerization of Spiroorthocarbonate with Bifunctional Oxetane

Summary: The cationic ring‐opening copolymerization behavior of SOC1 with BOXT and the properties of the obtained cross‐linked copolymers are described. SOC1 and BOXT are cationically copolymerized under various feed ratios to obtain the corresponding cross‐linked copolymers in 73–96% yields. The volume change during copolymerization could be controlled by the addition of SOC1 to obtain non‐shrinking or volume‐expanding copolymers. The glass transition temperatures (T_g) of the copolymers also decrease linearly with the feed ratio of SOC1, which suggests that the introduction of the flexible poly(SOC1) segment into the rigid BOXT cross‐linked segment relieves the internal stress in the resins that severely degrade their mechanical properties.

Cationic copolymerization of SOC1 and BOXT.     

Diffusion Kinetics at Liquid‐Glassy Polymer Interphases

Summary: We explored the diffusion mechanisms in a series of liquid/glassy polymer interphases. The diffusion experiments were performed in a unique way: the temperature range studied encompassed the glass transition temperature (T_g) of the glassy matrices. We observed that the diffusion behavior of the liquid polymer was remarkably continuous when passing through the matrix T_g, and that the diffusion modes at the liquid/glassy interphases were very similar to those observed in liquid/liquid polymer diffusion.

Diffusion profiles of liquid PS in glassy PPO obtained by confocal Raman spectroscopy. The sample was held at 160 °C for the times indicated in the plot.     

Novel Shape‐Memory Polymer with Two Transition Temperatures

Summary: This communication describes a novel kind of PMMA‐PEG semi‐interpenetrating network (semi‐IPN) which shows excellent shape‐memory behavior at two transition temperatures, the T_m of the PEG crystal and the T_g of the semi‐IPN. Based on a reversible order‐disorder transition of the crystals below and above the T_m of PEG, and the large difference in storage modulus below and above the T_g of the semi‐IPN, the polymer has a recovery ratio of 91 and 99%, respectively.

Shape‐memory phenomena of PMMA‐PEG2000 semi‐IPN.     

Ethylene‐Norbornene Copolymerization by New Titanium Complexes Bearing Tridentate Ligands. Sidearm Effects on Catalytic Activity

The Ti complexes containing tridentate [O⁻NS^R] (R = Me, ⁱPr) ligands with alkylthio sidearms were prepared. The methylthio ether complex (R = Me shown in the Scheme) exhibits an excellent activity for copolymerization of ethylene with norbornene upon activation with MMAO, which is 10 times more active than the corresponding phenylthio one (R = Ph).

     

Antioxidant Activity of Graft Chitosan Derivatives

Graft chitosan derivatives (CMCTS‐g‐MAAS and CMCTS‐g‐AAS) were prepared by the graft copolymerization of methacrylic acid sodium (MAAS) and acrylic acid sodium (AAS) onto the etherification product of chitosan‐carboxymethyl chitosan (CMCTS). Their antioxidant activity was estimated as superoxide anion scavengers by chemiluminescence techniques. The derivatives with low grafting percentages have a relatively low 50% inhibition concentration (IC₅₀), which could be related to the fact that they have different contents of hydroxyl and amino groups in the polymer chains.

Superoxide radical scavenging activity of CMCTS‐g‐MAAS.     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Defined Poly[styrene‐block‐(ferrocenylmethyl methacrylate)] Diblock Copolymers via Living Anionic Polymerization

Ferrocenylmethyl methacrylate (FMMA) is one of the very few metallocene‐based monomers that are promising candidates for truly living anionic polymerization. Nevertheless, FMMA homopolymers with a narrow polydispersity, or block copolymerization studies that result in satisfying blocking efficiencies, are unknown so far. Here we describe a procedure that leads to highly regular FMMA‐based polymers for the first time, characterized by polydispersity indices (PDI) of less that 1.05 and very high blocking efficiencies (>95%) in sequential copolymerization with styrene. Some of the obtained poly[styrene‐block‐(ferrocenylmethyl methacrylate)]s show unusual microphase morphologies, presumably the consequence of high T_gs causing ‘frustrated’ non‐equilibrium states.

     

Facile Fabrication of pH‐Responsive and Size‐Controllable Polymer Vesicles From a Commercially Available Hyperbranched Polyester

A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).

     

Rheology and Physical Properties of Polyethylene/Polyethylene‐Ionomer Blends and their Clay Nanocomposites

Rheological and solid‐state physical properties of blends containing high‐density polyethylene (HDPE) and a polyampholyte derivative (PE‐g‐PA) are assessed along with their onium ion‐exchanged montmorillonite clay (NR‐MM) nanocomposites. Strong deviations from the log‐additivity rule of zero‐shear viscosity, combined with synergistic behavior in tensile moduli, are consistent with a multi‐phase blend morphology. While this affects clay dispersion in filled blends, PE‐g‐PA/HDPE based nanocomposites are shown to exhibit a favorable balance between material stiffness and ductility.

     

Resilient Amorphous Networks Prepared by Photo‐Crosslinking High‐Molecular‐Weight D,L‐Lactide and Trimethylene Carbonate Macromers: Mechanical Properties and Shape‐Memory Behavior

Tough networks are prepared by photo‐crosslinking high‐molecular‐weight DLLA and TMC macromers. These amorphous networks exhibit tunable thermal and mechanical properties and have excellent shape‐memory features. Variation of the monomer ratio allows adjustment of T_g between approximately ?13 and +51 °C. The elastic moduli at room temperature can be varied between 4.5 and 2730 MPa. The crosslinks allow the networks to return to their original shape after deformation. 60:40 DLLA:TMC networks have T_g values between room temperature and body temperature, with mechanical properties at body temperature close to soft tissues. Several medical devices are prepared from these networks.

     

Reactivity Study of Elementary Steps in the Polymerization Mechanism of Acrylfuranic Compounds by Frontier Molecular Orbital Theory

A reactivity study of the most important elementary steps (propagation, intermolecular degradative transfer, and re‐initiation) in free‐radical polymerization of acrylfuranic systems, furfuryl acrylate (FA), and furfuryl methacrylate (FM), using the frontier molecular orbital theory is described. A qualitative explanation of reactivity trends of these steps for both systems is given based on absolute values of the SOMO/HOMO gap. The small difference between values of k_p for FA and FM compared to that found for MA and MMA ( ) is justified semi‐quantitatively by applying a formulation for the change of energy in the transition state using second‐order perturbation theory.