Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Self‐Assembly of Poly(γ‐benzyl L‐glutamate)‐graft‐Poly(ethylene glycol) and Its Mixtures with Poly(γ‐benzyl L‐glutamate) Homopolymer

Summary: Self‐association behaviors of poly(γ‐benzyl L ‐glutamate)‐graft‐poly(ethylene glycol) (PBLG‐graft‐PEG) and its mixtures with PBLG homopolymer in aqueous media were investigated by fluorescence spectroscopy, transmission electron microscopy (TEM), and nuclear magnetic resonance (NMR) spectroscopy. It was revealed that PBLG‐graft‐PEG could self‐assemble to form polymeric micelles with a core‐shell structure in the shape of spindle. The introduction of PBLG homopolymer not only decreases the critical micelle concentration, but also changes the morphology of the micelles.

The excitation fluorescence spectra of pyrene as a function of concentrations for the mixture of PBLG‐graft‐PEG with PBLG and a TEM image of the formed micelles.     

Crystallization behavior and spherulite morphology of hard and soft segments in butylene terephthalate–ϵ‐caprolactone copolyesters

The crystallization behaviors and spherulite morphology of a series of butylene terephthalate–ϵ‐caprolactone (BCL) copolyesters were explored with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction. The crystallization characteristics reflecting the segmented properties of BCL copolyesters are discussed. For BCL copolyesters with low or high hard‐segment contents, the ϵ‐caprolactone segments or butylene terephthalate segments are long enough to crystallize and even grow spherulites under appropriate conditions, and the crystallizability strengthens with increases in the corresponding segment sequence length. In BCL copolyesters, the crystallization of the soft segments requires a considerably long sequence length, whereas the hard segments even containing only one structural unit can still crystallize and even grow spherulites. The hard segments can grow the usual spherulites at a higher temperature like the poly(butylene terephthalate) homopolymer. The crystallizabilities of hard segments and soft segments for BCL and ethylene terephthalate–ϵ‐caprolactone copolyesters are compared and discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 634–644, 2001     

Imaging of Self‐Assembled Structures: Interpretation of TEM and Cryo‐TEM Images

The investigation of solution‐borne nanostructures by transmission electron microscopy (TEM) is a frequently used analytical method in materials chemistry. In many cases, the preparation of the TEM sample involves drying and staining steps, and the collection of images leads to the interaction of the specimen with the electron beam. Both aspects call for cautious interpretation of the resulting electron micrographs. Alternatively, a near‐native solvated state can be preserved by cryogenic vitrification and subsequent imaging by low‐dose cryogenic TEM. In this Minireview, we provide a critical analysis of sample preparation, and more importantly, of the acquisition and interpretation of electron micrographs. This overview should provide a framework for the application of (cryo)‐TEM as a powerful and reliable tool for the analysis of colloidal and self‐assembled structures with nanoscopic dimensions.     

Synthesis of PMHDO‐g‐PDEAEA well‐defined amphiphilic graft copolymer via successive living coordination polymerization and SET‐LRP

A series of well‐defined amphiphilic graft copolymer containing hydrophobic polyallene‐based backbone and hydrophilic poly(2‐(diethylamino)ethyl acrylate) (PDEAEA) side chains was synthesized by sequential living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO) and single electron transfer‐living radical polymerization (SET‐LRP) of 2‐(diethylamino)ethyl acrylate (DEAEA). Ni‐catalyzed living coordination polymerization of MHDO was first performed in toluene to give a well‐defined double‐bond‐containing poly(6‐methyl‐1,2‐heptadiene‐4‐ol) (PMHDO) homopolymer with a low polydispersity (M_w/M_n = 1.10). Next, 2‐chloropropionyl chloride was used for the esterification of pendant hydroxyls in every repeating unit of the homopolymer so that the homopolymer was converted to PMHDO‐Cl macroinitiator. Finally, SET‐LRP of DEAEA was initiated by the macroinitiator in tetrahydrofuran/H₂O using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system to afford well‐defined PMHDO‐g‐PDEAEA graft copolymers (M_w/M_n ≤ 1.22) through the grafting‐from strategy. The critical micelle concentration (cmc) was determined by ?uorescence spectroscopy with N‐phenyl‐1‐naphthylamine as probe and the micellar morphology was visualized by transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Urea hard segment morphology in flexible polyurethane foam

A series of flexible polyurethane slabstock foam samples were prepared with varying water content and studied using transmission electron microscopy (TEM), video-enhanced optical microscopy (VEM), and small-angle X-ray scattering (SAXS). A new TEM sample preparation technique was developed in which the foam is impregnated with water, frozen, and microtomed, and the polyether soft segment is selectively degraded in the electron beam. Structures of two size scales were detected. A texture with grains (“urea aggregates”) 50–200 nm in size was imaged using both VEM and low-magnification TEM for foams with formulations containing more than 2 pphp water. For the first time, images of urea hard segment microdomains in polyurethane foam (approximately 5 nm in size) were obtained using high-magnification TEM. A microdomain spacing of approximately 6–8 nm was estimated from the SAXS scattering profiles. Glycerol was added to one of the formulations in order to modify the urea microphase separation and to give insight into morphology development in molded polyurethane foam systems. No structure was observed in low-magnification TEM images of the glycerol-modified foam, although smaller structures (hard segments) were detected at high magnification and by SAXS. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 573–581, 1998     

Structural polymorphism in poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide)

Structural characterization of poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide) was carried out with optical microscopy, thermal analysis, X‐ray diffraction, and electron microscopy. Two different crystalline forms were found in accordance with the thermograms, powder and fiber X‐ray diffraction diagrams. The electron microscopy allows corroboration of the morphological and crystallographic differences. Molecular modeling was used to conclude the structural analogies and differences between the two crystalline forms that were related to the chain packing and orientation in the crystal cell, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2523–2530, 2002     

Composition dependence of nanophase‐separated structures formed by star‐shaped terpolymers of the A1.0B1.0CX type

Several hierarchical nanophase‐separated structures have been observed for a series of ABC star‐shaped terpolymers by transmission electron microscopy (TEM) and electron computerized tomography (3D‐TEM). The seven terpolymers synthesized are composed of polyisoprene (I), polystyrene (S), and poly(2‐vinylpyridine) (P), their volume fraction ratios of I:S:P are 1:1:X, where X equals 0.2, 0.4, 0.7, 1.2, 1.9, 3.0, and 4.9, respectively, and additional four samples were prepared by blending each two parent terpolymers. From morphological observation by TEM and tomography, a terpolymer with X of 0.2 shows lamellar structure with spheres at the interface, those with X ranging from 0.4 to 1.9 show cylindrical structures with two‐dimensional tiling, while those with X of 3.0 and 4.9 show hierarchical cylinders‐in‐lamella structure. Two the other terpolymer samples with X of 7.9 and 10 were produced by blending a P homopolymer with the terpolymer I_1.0S_1.0P_4.9, and they both exhibited columnar piled disk cylinders in P matrix. From the comparison of the present results with the predictions by the Monte–Carlo simulation, it was confirmed that the observed nanophase‐separated structures of the ISP star‐shaped terpolymers are mostly in good agreement with the prediction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2277–2283, 2007     

High‐Performance Electrocatalytic Activity of Palladium‐Copper Nanoalloy towards Methanol Electro‐oxidation in an Alkaline Medium

Nanoalloy of PdCu were synthesized with three different stoichiometry ratio (3 : 1, 1 : 1, 1 : 3) by simple co‐reduction process at 5 °C with Triton X‐100 as surface modifier. Morphology and composition of the synthesized catalyst were characterized by X‐ray diffraction (XRD), X‐ray photo electron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive X‐ray analysis (EDAX) with selected area electron diffraction (SAED) techniques. Electrocatalytic activity and stability of the catalysts towards methanol oxidation reaction were verified in alkaline medium by cyclic voltammetry (CV) and chronoamperometry (CA). Observed results emphasis that PdCu nanoalloy in the 3 : 1 stoichiometric ratio shows better catalytic activity (778.98 mA mg⁻¹) and stability not only in the initial state (93.73 mA mg⁻¹) but also after 1800 s (8.61 mA mg⁻¹) among all other prepared catalysts.     

Convenient synthesis of thermo‐responsive PtBA‐g‐PPEGMEMA well‐defined amphiphilic graft copolymer without polymeric functional group transformation

A series of well‐defined amphiphilic graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly[poly(ethylene glycol) methyl ether methacrylate)] (PPEGMEMA) side chains were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single‐electron‐transfer living radical polymerization (SET‐LRP) without any polymeric functional group transformation. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromoisobutanoyloxy)methyl)acrylate (tBBIBMA), was first prepared, which can be homopolymerized by RAFT to give a well‐defined PtBBIBMA homopolymer with a narrow molecular weight distribution (M_w/M_n = 1.15). This homopolymer with pendant Br initiation group in every repeating unit initiated SET‐LRP of PEGMEMA at 45 °C using CuBr/dHbpy as catalytic system to afford well‐defined PtBBIBMA‐g‐PPEGMEMA graft copolymers via the grafting‐from strategy. The self‐assembly behavior of the obtained graft copolymers in aqueous media was investigated by fluorescence spectroscopy and TEM. These copolymers were found to be stimuli‐responsive to both temperature and ions. Finally, poly(acrylic acid)‐g‐PPEGMEMA double hydrophilic graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PPEGMEMA side chains kept inert. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The effect of electron beam irradiation on dynamic shear rheological behavior of a poly (propylene‐co‐ethylene) heterophasic copolymer

In this study the effect of electron beam irradiation on rheological properties of a poly (propylene‐co‐ethylene) heterophasic copolymer is evaluated. Using dynamic viscoelastic measurement in the linear viscoelastic range of deformation, it is observed that the complex viscosity and dynamic modulus of polypropylenes were decreased by increasing the irradiation dose. Polypropylene heterophasic copolymers consist of ethylene propylene rubber phase dispersed in polypropylene homopolymer matrix. The high energy electron beams simultaneously affect both isotactic polypropylene (iPP) matrix and ethylene propylene dispersed phase. The molecular chains of polypropylene homopolymer phase breakdown to smaller species, those are prone to degradation and branching as well. Increase in the melt flow rate behavior and shifting the cross‐over point to higher frequencies and increase in melt strength are due to this phenomenon. At the same time, the ethylene propylene phase of the polypropylene copolymer cross‐links due to irradiation, and a significant effect on the rheological behavior of samples are observed. The mathematical modeling of complex viscosity behavior revealed the conformity of experimental data with modified Carreau equation. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and properties of magnetite/poly (aniline‐co‐8‐amino‐2‐naphthalenesulfonic acid) (SPAN) nanocomposites

Composites were prepared by incorporating magnetite (Fe₃O₄) nanoparticles into the matrix of a sulfonated polyaniline (SPAN) [poly(aniline‐co‐8‐amino‐2‐naphthalenesulfonic acid) PANSA] through chemical oxidative polymerization of a mixture of aniline and 8‐amino‐2‐naphthalenesulfonic acid in the presence of magnetite nanoparticles. The composite, magnetite/SPAN(PANSA) was characterized by means of transmission electron microscopy (TEM), X‐ray diffraction (XRD), elemental analysis (EA), Fourier transform infrared (FT‐IR) spectra, UV‐vis spectroscopy, thermogravimetric analysis (TGA), conductivity and magnetic properties measurements. TEM image shows that magnetite nanoparticles were finely distributed into the SPAN matrix. XRD pattern of the nanocomposite reveals the presence of additional crystalline order through the appearance of a sharp peak at ～43° and 71°. Conductivity of the nanocomposite (0.23 S/cm) is much higher than pristine copolymer (1.97 × 10^?2 S/cm). The results of FT‐IR and UV‐visible spectroscopy reveal the presence of molecular level interactions between SO groups in SPAN and magnetite nanoparticles in the composite. Copyright © 2006 John Wiley & Sons, Ltd.     

Study on electron beam cross‐linked ethylene‐tetrafluoroethylene copolymer‐insulated cables for aerospace applications: Mechanical performance,crystallization kinetics,and fluoride precipitation

The cross‐linking effects of cross‐linked ethylene‐tetrafluoroethylene copolymer (XETFE)‐insulated cables at different electron beam radiation doses were analyzed in this paper. Evaluation of the mechanical performance of the cables revealed that the highest tensile and breaking elongation was achieved at a radiation dose of 8 × 10⁴ Gy and that XETFE had a good resistance to extreme electron beam irradiation. This is attributed to the cross‐linking effects induced by electron beam irradiation, and this takes full advantage of the strength of molecular chain crosslink to each other. The crystallization kinetics of XETFE at different electron beam radiation doses were studied in detail in terms of the non‐isothermal and isothermal crystallization processes. The results indicated that the crystallinity of the XETFE domain increased with an increase in the radiation dose as a result of heterogeneous nucleation. Moreover, the highest ΔE_a was obtained, indicating that XETFE absorbed some energy at a radiation dose of 8 × 10⁴ Gy. These kinetic parameters had help in carrying out a comprehensive evaluation of the performance of XETFE‐insulated cables for aerospace applications. Moreover, the fluoride precipitation observed in this study indicated that upon electron beam irradiation, XETFE could internally produce hydrogen fluoride, which is corrosive to metals. Thus, optimizing the radiation dose was necessary to achieve the desired performance. We could believe that the improvement for properties of electron beam XETFE insulation cables would expand their range of applications in the aerospace field.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

SET‐LRP synthesis of PMHDO‐g‐PNIPAM well‐defined amphiphilic graft copolymer

A well‐defined amphiphilic graft copolymer, consisting of hydrophobic polyallene‐based backbone and hydrophilic poly(N‐isopropylacrylamide) (PNIPAM) side chains, was prepared by the combination of living coordination polymerization, single electron transfer‐living radical polymerization (SET‐LRP), and the grafting‐from strategy. First, the double‐bond‐containing backbone was prepared by [(η³‐allyl)NiOCOCF₃]₂‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO). Next, the pendant hydroxyls in every repeating unit of poly(6‐methyl‐1,2‐heptadiene‐4‐ol) (PMHDO) homopolymer were treated with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. Finally, PNIPAM side chains were grown from PMHDO backbone via SET‐LRP of N‐isopropylacrylamide initiated by PMHDO‐Cl macroinitiator in N,N‐dimethylformamide/2‐propanol using copper(I) chloride/tris(2‐(dimethylamino)ethyl)amine as catalytic system to afford PMHDO‐g‐PNIPAM graft copolymers with a narrow molecular weight distribution (M_w/M_n = 1.19). The critical micelle concentration (cmc) in water was determined by fluorescence probe technique and the effects of pH and salinity on the cmc of PMHDO‐g‐PNIPAM were also investigated. The micellar morphology was found to be spheres using transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Successive SET‐LRP and ATRP synthesis of ferrocene‐based PPEGMEA‐g‐PAEFC well‐defined amphiphilic graft copolymer

A series of ferrocene‐based well‐defined amphiphilic graft copolymers, consisting of hydrophilic poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and hydrophobic poly(2‐acryloyloxyethyl ferrocenecarboxylate) (PAEFC) side chains were synthesized by successive single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was prepared by SET‐LRP of PEGMEA macromonomer, and it was then treated with lithium di‐isopropylamide and 2‐bromopropionyl bromide at ?78 °C to give PPEGMEA‐Br macroinitiator. The targeted well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.32) were synthesized via ATRP of AEFC initiated by PPEGMEA‐Br macroinitiator, and the molecular weights of the backbone and side chains were both controllable. The electro‐chemical behaviors of graft copolymers were studied by cyclic voltammetry, and it was found that graft copolymers were more difficult to be oxidized, and the reversibility of electrode process became less with raising the content of PAEFC segment. The effects of the preparation method, the length of hydrophobic PAEFC segment, and the initial water content on self‐assembly behavior of PPEGMEA‐g‐PAEFC graft copolymers in aqueous media were investigated by transmission electron microscopy. The morphologies of micelles could transform from cylinders to spheres or rods with changing the preparation condition and the length of side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

X‐Ray and Electron Diffraction Study of Poly(p‐dioxanone)

Summary: Solution‐grown lamellar crystals of poly(p‐dioxanone) (PPDX) have been crystallized isothermally from butane‐1,4‐diol at 100 °C. The crystal structure of PPDX has been determined by interpretation of X‐ray fiber diagrams of PPDX fibers and electron diffraction diagrams of lozenge‐shaped chain‐folder lamellar crystals. The unit cell of PPDX is orthorhombic with space group P2₁2₁2₁ and parameters: a = 0.970 nm, b = 0.742 nm, and c (chain axis) = 0.682 nm. There are two chains per unit cell, which exist in an antiparallel arrangement.

Transmission electron micrograph of PPDX chain‐folded lamellar crystals obtained by isothermal crystallization and its electron diffraction diagram.     

Epitaxy‐like orientation of nanoscale Ag islands grown on air‐oxidized Si(110)‐(5 × 1) surfaces

Growth of Ag islands under ultra‐high vacuum condition on air‐oxidized Si(110)‐(5 × 1) surfaces has been investigated by in situ reflection high energy electron diffraction and ex situ scanning electron microscopy and cross‐sectional transmission electron microscopy. A thin oxide is formed on Si via exposure of the clean Si(110)‐(5 × 1) surface to air. The oxide layer has a short range order. Deposition of Ag at different thicknesses and at different substrate temperatures reveal that the crystalline qualities of the Ag film are almost independent of the thickness of the Ag layer and depend only on the substrate temperature. Ag deposition at room temperature leads to the growth of randomly oriented Ag islands while preferred orientation evolves when Ag is deposited at higher temperatures. For deposition at 550 °C sharp spots in the reflection high energy electron diffraction pattern corresponding to an epitaxial orientation with the underlying Si substrate are observed. The presence of a short range order on the oxidized surface apparently influences the crystallographic orientation of the Ag islands. Copyright © 2011 John Wiley & Sons, Ltd.     

Interface characterization of nickel contacts to bulk bismuth tellurium selenide

Transmission electron microscopy (TEM) characterization of nickel contacts to bulk bismuth tellurium selenide [Bi₂(Te,Se)₃] is reported. Samples were prepared in a dual column focused ion beam/scanning electron microscope (FIB/SEM) system using a lift‐out technique, with ion beam energy and exposure times carefully optimized to minimize sample damage. Diffusion of Ni into Bi₂(Te,Se)₃ was observed and the formation of a nickel telluride (NiTe) interfacial region confirmed after heat treatment at 200 °C. Selected area diffraction patterns provided evidence of a modified bismuth telluride–like structure at the interface, identified by analytical electron microscopy to be composed of Ni and Bi₂(Te,Se)₃. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Characterization of SnO2 One-dimensional Nanostructures

Single-crystalline SnO2 nanowires have been successfully prepared in large scale on Au-coated silicon substrate by heating the mixture of self-made high-purity SnO2 powders and graphite powders at 900℃. Besides the line type nanowires some more features were observed. The products were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and Raman spectrum techniques. The results indicate that the tin dioxide nanowires have a rutile structure with diameters ranging from 30 to 120 nm and lengths up to several tens of micrometers. The possible mechanism of the growth and reaction for the nanowires was also discussed.